HOTEC Holztechnik Thüringen UG

Condition: good (used), Code: 0028 Brand: OMG Model: EPM/70 Automatic slotting machine for blinds Technical data Spindle connection mm 10 Drill speed 12000 rpm Simultaneous machining of 2 sections 18 possible pitches with a single toothed rod Slots depth up to 25 mm Drill motor Hp 1,5 Ndjdpfoxvxpgsx Ac Dsd Slide motor Hp 1 Up to 20 slots / minute Inclination from from 90 degrees (vertical) to 0 degrees (horizontal) Max section dimensions mm 100 x 120 Automatic stop Overall dimensions: machine mm 1500 x 1000 x 1200 h - kg 490 - Rack mm 3200 x 100 x 200 h - kg 30

Year of construction: 1999, condition: used, Used machine Nodpfxsxqihis Ac Dodd Year of manufacture: 1999 Large milling area despite compact design Copy milling using lateral stops or templates at a 1:1 ratio Pneumatic copy pin, two-stage, for two different cutter diameters The patented suspension of the copying lever ensures precise milling with minimal effort Table height adjustment for extremely high profiles up to 400 mm Easy tool change via spindle lock Pneumatic material clamping device Metering spray unit Options: Copy templates milled for standard handle holes and PZ milling Copy pin Collet chuck Stop system Material clamping device with 2 clamping cylinders Milling cutter 8 mm Availability: short-term Location: Flörsheim

Condition: new, Clamp length , mm Clamp width , mm 0 , Nm Painting aid for painting the sash and glazing bead frame at the same time RU-LH painting aid for glazing bead frames for processing staples L=50mm Length 700 mm, width 500 mm, working height adjustable from 700 - 1200 mm. At the 4 corners 1 bracket is placed on each of the glazing bead frames. The positioning is done diagonally and in such a way that the brackets protrude approx. 35 mm from the wood, Ndsdpfx Acjxpi Efo Dsd When pressed into the sash frame, a clamping. The glazing bead frame is ready for painting Positioned at a distance of approx. 20 mm in front of the sash. After drying or before installing the sash the glazing bead frame is flush with the sash pressed and only removed again before glazing. The clamps can then be pulled out again by hand become. Stand frame with support table vertical 85°, adjustable in inclination. 2 pieces compensation frames for different glazing bead thicknesses, operation via foot valve. Price on request plus packaging and shipping Option with extra charge: Package of brackets 26 x 50 mm, 4,300 pieces each EUR 74.00 You can find recordings of the painting aid at the end of the video below! (technical information according to manufacturer - no guarantee!)

Condition: new, functionality: fully functional, machine/vehicle number: ST2100-001, overall weight: 450 kg, Year of construction: 2021, STEMA GLF Dowel Shooter Automatic Ndjdpfxexhv A Ie Ac Ded Certainly the most productive dowel inserting machine for heavy and long dowels. Pre-installed for dowels, 80 x 8 mm, as commonly used in window manufacturing. Please refer to the detailed description in the attached PDF. The machine is available for demonstration in our showroom and ready for operation.

Year of construction: 2005, condition: good (used), Wing trolley with 2 x 6 rungs Rung trolley Order picking trolley Mobile Length: 1.1 m Ndodpfoxacubox Ac Djd Rungs: 0.55 m Height: 2 m Location: in stock 54634 Bitburg - immediately available -

Year of construction: 2009, condition: good (used), Wing trolley with 2 x 22 rungs Rung trolley Order picking trolley Mobile Length: 2.40 m Rungs: 0.55 m Nedpfexacp Sjx Ac Djdd Location: from stock 54634 Bitburg - immediately available -

Year of construction: 2004, condition: used, CNC machining center for window and entrance door components KOCH Windoor410 Year of manufacture: 2004 Machining operations: Nedpfx Aewuyfpjc Dsdd Hinge drilling (sash) Strike plate marking and assembly hole drilling (frame) Strike plate milling Strike plate milling (4 mm rebate clearance) Workpiece dimensions: Workpiece length: 300 – 4,500 mm Workpiece width: 20 - 240 mm Workpiece thickness: 20 - 150 mm Machine equipped with 2 working zones. Maximum machining length with 2 working zones: 1,100 mm Maximum machining length with 1 working zone: 2,500 mm Machining units: a) Horizontal drilling unit with 1 drill spindle at fixed angle of 7° b) Horizontal drilling head with 3 individually selectable drill spindles c) Horizontal milling unit for lock cases and strike plate milling d) Vertical milling unit for profile change milling and strike plate milling e) Vertical drilling unit with 5 individually selectable drill spindles Connection data: Electrical connection: 400 V, 50 Hz, 3 phases Voltage fluctuations max. +6 % to -10 % Air connection: 7 bar Extraction air speed approx. 30 m/sec. Ambient temperature at installation site: min. 1°C, max. 40°C

Year of construction: 2025, condition: new, Dimensions (L/W/H) 1300x800x1350 mm Weight 370 kg Total power requirement 0 kw Ndjdpfxsv A E Nkj Ac Dsd

Condition: new, Glass bead nailer "2 P Jumbo automatic E.C." - new - Your advantages: - The corner connections are closed - No open glazing bead joints - There are no color differences when painting - The glazing bead frames are easy to assign Clamp corner joining machine 2P Jumbo Automatic E.C. for clamping glazing bead frames. Choice between automatic and manual operation; With angle system, clamping device from above and front Pressure can be regulated separately. Ndjdpfevnh T Njx Ac Djd Inserting parallel and superimposed ones Clamps possible via electronic programming control. Stapler can be mounted on a suitable work table, Operation via foot valve. ----- Price in this version on request! Plus packaging/shipping ----- Pictures show Clamp corner joining machine 2P inlcuding the option of movable work table (please find details as follows under additional prices) Additional prices: ----- Movable work table height adjustable from 700 - 1000 mm, 2 pieces of support bars can be plugged in 1000 mm long, 2 pieces swiveling and sliding Support bars 1000 mm, support bars covered with felt, 4 swivel castors, 2 of which have a stop device. ----- Additional price: 992.00 euros net Brackets: packages 15 mm brackets (package of 2000): Price 21.00 euros 12 mm brackets (package of 3000 pieces): Price 31.00 euros 10 mm staples (package of 3000 pieces): Price 31.00 euros Dimensions and weights ----- Jumbo Automatic E.C 470 x 370 x 300 mm, 35 kg Work table 32 kg All prices net. plus statutory VAT Ex works plus packaging and shipping (technical data according to manufacturer - no guarantee!)

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, overall weight: 1,050 kg, MEK wooden windows sash processing center The device was used for processing MEK windows (fixed wooden windows). This production device has an automatic optimization (6000 mm long workpiece is cut and end connections are made according to the program) The device is also equipped with a labelmaker Device is in good condition. The price of the device is to be offered by the buyer. Buyer is responsible for transportation and dismantling. Nodsu E St Sspfx Ac Dedd If you have any further questions, please contact us about the production equipmen

Condition: used, Used control cabinet of a Weinig type Unicontrol 6 as a spare parts carrier or for the new construction of a Nedpfet Na Drsx Ac Dodd control cabinet. Contents include: * Brake device Hilger and Kern * Transformer Rathgeber type ET 1000.

Year of construction: 2014, condition: used, PROLOGIC window construction software FenOffice 14 Ndodpfx Acorci S Ss Ded Conturex

Condition: used, suitable for UNITEC 10 or similar, BJ 1998 CNC motor controlled, Number: 2 Nsdpfslkckmsx Ac Dsdd Price per piece: €2,000.00 + VAT

Condition: used, Electronic length stop Weinig for window production for positioning / feeding wood when sawing or similar. * Solid construction * Further technical data on request. Max. workpiece length approx.: 2.300 mm Njdpfxslf I Nuj Ac Dsdd Dimensions LWH approx.:: 3.8 x 1.3 x 1.15 m Travel approx.:: 2.800 mm Travel distance approx.:: 2.800 mm