R & T RecyclingTechnik

Condition: refurbished (used), Year of construction: 2019, operating hours: 3,000 h, functionality: fully functional, pressing force: 70 t, overall weight: 9,500 kg, filling opening width: 420 mm, filling opening length: 1,250 mm, Technical data packing press / can press / metal sheet press: Manufacturer unoTech GmbH Type UPAXX 70 Year of manufacture 2019 Operating hours approx. 3,000 hours Pressing force 700 kN at 315 bar Filling opening chute 420 x 1,250 mm (d x w) Channel cross-section (package dimension) 350 x 500 mm (h x w), length depending on material Drive power 30 kW Connected load 40 kW Power consumption, total 70 A Throughput capacity for empty beverage cans with: Fedpfxsu Th S Ss Afpogh one pressing stroke approx. 1.7 t/hour two pressing strokes approx. 2.5 t/hour Achieved compaction approx. 1200 kg/m³ Hydraulic oil tank capacity 850 l Press dimensions built up 8,000 x 1,600 x 2,500 mm (l x w x h) Transport weight press approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant steel S355 Material properties: According to the manufacturer, this machine is suitable for pressing tin cans, metal sheet offcuts, sheet steel as well as aliminium, brass and copper waste. Condition of the baler: The can press was completely overhauled in our workshop. The press is in a very good condition and is sold with the 12 months OBM parts warranty. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Horizontal hydraulic bin crusher Fjdpfxjpyncao Afpsgh

Condition: as good as new (ex-display), Year of construction: 2025, The BTS-Drum Crusher PLC auto is ideal for compacting 30 to 220 Ltr drums / barrels, but also plastic and cardboard drums can be easily reduced to their minimum of volume. In many cases this compacted material can then even be marketed again. The drum press impresses with its ease of use, safe operation and high throughput quality. By crushing these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 24 Ton Machine size: 2587 H x 1190 W x 1000 D mm Fjdpfx Aoc Spguefpogh Machine weight: 690 kg Transport height: 1800 mm Compaction rate: 8:1 Cycle times: 40 seconds Motor: 11 kW 32 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB PLC auto compaction cycles Compaction head with spikes to punch the drum to drain out any residual liquids Maximum safety standards by totally enclosed chamber 30 Ltr. collection tray with tap connection Useable for 30 to 220 Ltr. steel drums, plastic drums and cardboard drums A quality product “Made in Europe” Suitable for compacting Steel drums Plastic drums Cardboard drums Fiber and paper drums Optional extras Machine colour RAL Can and filter crush insert Multi head to compact inside a 200 Ltr steel drum Drum Crusher, Drum Press, Drum Compactor, Barrel Crusher, Barrel Press, Barrel Compactor

Condition: as good as new (ex-display), Year of construction: 2025, The BTS-MF60HD is the ideal special waste baler for compacting your difficult and hard materials such as cans, PET, metal buckets, metal containers, but also plastic canister and much more recyclable materials can be compacted easily and safe to a minimum of its size. The special waste baler impresses with its ease of use and safe operation, finished bales can be easily removed with the automatic bale ejector. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 13 Ton Bale weight: 25 - 60 kg (material depending) Bale size: 650 H (var.) x 600 W x 400 D mm Machine size: 2144 H x 1267 W x 1328 D mm Machine weight: 706 kg Transport height: 2144 mm Loading aperture: 890 H x 600 W x 400 D mm Cycle times: 25 seconds Motor: 2.2 kW 16 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB Top loading Special Waste Baler User-friendly lever control Automatic bale kicker for easy bale removal Retainers for reducing the material spring back Cross Strapping Tying System to keep difficult materials in bale Reel holder for 7 rolls of strapping A quality product “Made in Europe” Suitable for compacting Fodpfx Afobhy Twopjgh PET bottles Cans and sheet metal containers Canister and plastic containers Cardboard and plastic film and foils Optional Extras Machine colour RAL Strapping rolls Power supply 380 - 400 V (3 phase) Can Compactor, Can Press, PET Compactor, PET Press, Baler PET bottles, PET Bottle Baler, Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: as good as new (ex-display), Year of construction: 2025, The BTS-Drum Crusher is ideal for compacting 30 to 220 Ltr drums / barrels, but also plastic and cardboard drums can be easily reduced to their minimum of volume. In many cases this compacted material can then even be marketed again. The drum press impresses with its ease of use, safe operation and high throughput quality. By crushing these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 24 Ton Machine size: 2587 H x 1190 W x 1000 D mm Machine weight: 690 kg Transport height: 1800 mm Compaction rate: 8:1 Cycle times: 40 seconds Fsdpszdr Tefx Afpsgh Motor: 11 kW 32 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB User-friendly lever control Compaction head with spikes to punch the drum to drain out any residual liquids Maximum safety standards by totally enclosed chamber 30 Ltr. collection tray with tap connection Useable for 30 to 220 Ltr. steel drums, plastic drums and cardboard drums A quality product “Made in Europe” Suitable for compacting Steel drums Plastic drums Cardboard drums Fiber and paper drums Optional extras Machine colour RAL Can and filter crush insert PLC auto compaction cycles Multi head to compact inside a 200 Ltr steel drum Drum Crusher, Drum Press, Drum Compactor, Barrel Press, Barrel Compactor for Metal drums / Plastic drums