F. A. Schmahl jr. GmbH & Co. KG

Condition: ready for operation (used), Year of construction: 1998, operating hours: 4,197 h, functionality: fully functional, saw blade diameter: 850 mm, saw blade bore: 10 mm, TECHNICAL DETAILS Saw Blade Diameter (without loader): 80 – 850 mm Saw Blade Diameter (with loader): 250 – 450 mm Bore Diameter (from): 10 mm Saw Blade Magazine: up to 40 pcs Blsdpfx Ajypbx Ejh Iod Control and Software Control: Industrial PC with Siemens standard PLC Software: For all tooth shapes, including special profiles Grinding Process Sequence 1st Step: After starting, the vacuum gripper picks the topmost saw blade from Magazine 1. It is transferred to the Woodtronic NC4, the guard is opened. 2nd Step: The loader returns. The Woodtronic NC4 is closed and the grinding program is initiated. The loader removes the spacer ring from Magazine 1 and transfers it to Magazine 2. Waiting position. 3rd Step: After the grinding process and the opening of the Woodtronic, the loader removes the ground saw blade and transfers it to Magazine 2. Process Repetition Steps 1 to 3 are repeated until the grinding operation is completed. Pre-programming possible: Grinding can run without interruption even while programming the next magazine. The Woodtronic NC4 can be pre-programmed during the day and performs automatic grinding at night. Measurable with WALTER Saw Check: Rake angles, clearance angles, diameter, number of teeth Tooth shape: manual input required EQUIPMENT - Automatic loader - Walter Saw Check - Measuring device for carbide-tipped circular saw blades

Condition: used, Year of construction: 2021, Suitable for connection to a Vollmer CHD 250/CHD 251/CHD 270, CHF 270/CHF 350 carbide sawblade grinding machine. Loading system for sawblades with a diameter of up to 840 mm. Accessories: 2 loading trolleys Data entry station DES 400 Oil collection tray Simplest stack circular saw blade outside diameter: 200 to 840 mm double stack: 200 to 410 mm maximum saw blade weight single-sided occupancy: 20 kg double-sided occupancy: 11 kg Bore diameter: 16 to 180 mm sheet thickness: up to 5 mm Stack height: < 300 mm Bjdpfsymydzox Ah Ield Connected load approx.: 3,2 kVA (400 V / 50 Hz) Weight approx: 1680 kg colour: Gray RAL 7035

Condition: used, Year of construction: 1989, functionality: fully functional, Used in good condition Blsdpfeymlr Rsx Ah Ijd

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, saw blade diameter: 650 mm, Central suction needed, with oil cooling Blodpfx Aoymlrdsh Ijd

Condition: used, Year of construction: 2007, Suitable for attachment to a carbide saw blade grinding machine of the type Vollmer CHD 250/CHD 251/CHD 270, CHF 270/CHF 350, loading system for saw blades with up to 630 mm diameter. Accessories: Data input station DES 300 2 loading carts oil collection pan, automatic central lubrication, control cabinet cooler. Simplest stack circular saw blade outside diameter: 100 to 630 mm double stack: 100 to 305 mm maximum saw blade weight single-sided occupancy: 9 kg double-sided occupancy: 6 kg Bore diameter: 16 to 180 mm sheet thickness: up to 5 mm Bodpfx Aheylh Skj Isld Stack height: < 300 mm Connected load approx.: 1,8 kVA (400 V / 50 Hz) Dimensions W x D x H approx.: 3130 x 1660 x 2000 mm Weight approx: 1250 kg colour: Grey RAL 7035

Condition: used, Year of construction: 2014, Suitable for attachment to a carbide saw blade grinding machine of the type Vollmer CHD 250/CHD 251/CHD 270, CHF 270/CHF 350, loading system for saw blades with up to 630 mm diameter. Accessories: DES 300 data input station Blodpfx Ahoylhtuo Ijd 3 loading trolleys Oil collection tray, Automatic central lubrication, Control cabinet cooler. Simplest stack circular saw blade outside diameter: 100 to 630 mm double stack: 100 to 305 mm maximum saw blade weight single-sided occupancy: 9 kg double-sided occupancy: 6 kg Bore diameter: 16 to 180 mm sheet thickness: up to 5 mm Stack height: < 300 mm Connected load approx.: 1.8 kVA (400 V / 60 Hz) Weight approx: 1400 kg colour: Gray RAL 7035

Condition: used, Year of construction: 1980, functionality: fully functional, Sharpening machine for circular saw blades, with bevel grinding Bsdpfxsyi Ek So Ah Isld

Condition: good (used), Year of construction: 1979, functionality: fully functional, saw blade diameter: 2,000 mm, Technical details for TEMPO ASG 2000 The machine is primarily used for re-sharpening and processing industrial circular saw blades. Function: Automatic sharpening with indexing gearbox for precise results. Application range: Suitable for HSS saw blades, segment saw blades, cold cut saw blades, and hot saw blades. Processing range: Designed for saw blade diameters from 315 mm to 2050 mm. Bsdpfx Ajyizypsh Ijld

Condition: good (used), Year of construction: 1977, functionality: fully functional, Sharpening machine for HSS saw blades, SCHMIDT-TEMPO ASG500A Bsdpfx Ahjyizv Rj Iold Technical Features The machine is characterized by the following key specifications: Grinding range: Suitable for saw blade diameters from approx. 20 mm to 500 mm. Drive: Mechanically controlled feed (often using change gears for different tooth counts). Tooth profiles: Generally suitable for standard tooth profiles such as A, B, and C.

Condition: good (used), Year of construction: 1990, functionality: fully functional, saw blade diameter: 1,600 mm, Sharpening Machine for Metal HSS Saw Blades. Bledpfxeyfumzj Ah Ijd Technical Specifications: - Saw blade diameter: approx. 20 mm to 500 mm (other sources state capacities from 20–400 mm). - Saw blade thickness: maximum 6 mm. - Working speed: steplessly adjustable from approx. 40 to 140 strokes per minute. - Grinding wheel diameter: max. 200 mm. - Tooth count: electronically pre-selectable from 20 to 999 teeth. - Weight: depending on configuration, between approx. 900 kg and up to 1.2 t. Functions and Adjustment Options: The machine offers comprehensive machining options for different tooth geometries: - Supported tooth forms: Alternate top bevel tooth, high arc tooth, and flat arc tooth according to DIN 1840 (tooth forms A, B, BW, C). - Automation: Automatic infeed of the grinding wheel and an automatic dressing device. - Grinding modes: Supports relief grinding, oscillating grinding, and cylindrical grinding. Control: - Equipped with an LED display and error notification panel for monitoring the grinding process. Drive: - Separate motors for the indexing mechanism and the grinding wheel. Space requirements: - The dimensions for used models are specified at approx. 1200 mm width.

Condition: used, Year of construction: 2011, Suitable for fully automatic grinding, re-toothing, and beveling of HSS and segmented circular saw blades, as well as solid carbide circular saw blades, chamfering saw blades/thin-cutting saws with chip breakers (diameters from 200-500 mm, tooth pitch from 8-30 mm), using a deep grinding process with CBN or diamond grinding wheels. Accessories: Total enclosure Automatic central lubrication Integrated coolant system with coolant tank and pump Device for fully automatic chamfering of regularly toothed saw blades Programmes for all standard curved and pointed teeth CAD programme for designing your own tooth shapes and changing the speed sequences Automatic threading of the grinding wheel, including checking the saw blade diameter and tooth pitch Service software with error diagnosis display on the screen Automatic switching of the peripheral speed between CBN and diamond grinding wheels Grinding wheel thickness compensation, i.e. different tooth pitches can be ground with one grinding wheel Bjdpfxsycu Erj Ah Iold Conversion kit for oil (pressure relief flap, electromechanical door lock, pressure monitor, etc.), Aerosol fire extinguishing system Oil drip tray Machine light Control cabinet cooling unit. Saw diameter: (40) 130 - 850 mm Tooth pitch: 1 - 55 mm Number of teeth: 2 - 998 Saw blade thickness: max. 8 mm Grinding wheel diameter: 200 x 32 mm Coolant pressure: approx. 6 bar Coolant tank: approx. 300 l Grinding motor: 3 kW Connected load: approx. 7.3 kW (400 V / 50 Hz) Weight: approx. 1600 kg Dimensions: L x W x H = 1250 x 1870 x 2250 mm colour: grey RAL 7045, RAL 7047.

Condition: excellent (used), for grinding saw blade diameters from 30 up to max. 300 mm Grinding wheel diameter 150 mm, Blodpfx Aoycqmleh Ijd lots of accessories good, well-maintained condition Operating manual is available

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, We are selling the EMS 10 U machine, year 1988, no. 187. It is in good condition – see photos! The technical specifications can be found in the operating manual; please refer to the documents at the link below! The machine was used in our facility for frame saw blades. The original operating manual is included as well. Bsdpfeycfy Hjx Ah Isld Please feel free to make us an offer! Pickup in 6858 Schwarzach.

Condition: good (used), Year of construction: 2016, operating hours: 3,000 h, Dinaco grinding machine, for sharpening band saw blades. The machine is refurbished, features automatic grinding wheel alignment, water cooling, and allows for grinding of vario tooth shapes. Bodex Tguhjpfx Ah Isld

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: CHD 251R2, grinding wheel diameter: 200 mm, input current: 380 A, We offer this excellent condition Vollmer CHD 251R2 ND300 saw-blade sharpening machine. The CHD 251 R2 automatic grinding machine with ND 230 Robot system as a service for fully automatic machining with 5 bay loading. Year of construction 2002. Manufacturer: Vollmer Werke Maschinenfabrik GmbH Model: CHD 251R2 ND300 Blsdpfx Ajx R Eydjh Ied Year of manufacture: 2002 Serial number: 575 Available Now If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 1994, VOLLMER CHP 025 with Hollow face teeth and cheap breaker teeth device Blodjx Rrilepfx Ah Ijd

Condition: excellent (used), Grinding Machine LOROCH type: AK very good condition loaded on a truck Bedpfxsxn Uito Ah Isld fixed price

Condition: new, Year of construction: 2025, The ZM101 is a pioneering product in our lineup, designed to sharpen sawblades with widths of up to 100 mm at a remarkable rate of 65 teeth per minute. This efficiency enables it to simultaneously service 3-4 bandsaw/sawmill machines. Equipped with an abrasive ceramic disk, the ZM101 can expertly sharpen all teeth with profiles. Its robust construction allows it to perform reliably under the most demanding conditions, making it a favorite among our customers. Additionally, its straightforward design ensures ease of use and low maintenance costs, further enhancing its appeal. Technical characteristics: Bedpfx Ajxligujh Ield Maximum length of the blade: 6000 (8000) mm Minimum width of the blade: 20 mm Maximum width of the blade: 100 mm Maximum height of the tooth: 12 mm Front angle of the tooth: 0÷25° Tooth pitch: Profile N: 10, 12.5, 15, 20, 25 mm Profile WM: 22, 25 mm Working capacity: 65 teeth/min Size of the abrasive disc: Cut-in sharpening, profile N: ø200 x 10 x ø32, ø200 x 13 x ø32 mm Profile sharpening, profile WM: ø200 x 8 x ø32, ø200 x 10 x ø32 mm Voltage: 380 V Power of the electric motors: 0.09 and 0.37 kW Size: Without band saw holder (L x W x H): 750 x 550 x 1100 mm With band saw holder (L x W x H): 2000 (3000) x 1000 x 1100 mm

Condition: new, Year of construction: 2025, The ZM101 is a pioneering product in our lineup, designed to sharpen sawblades with widths of up to 100 mm at a remarkable rate of 65 teeth per minute. This efficiency enables it to simultaneously service 3-4 bandsaw/sawmill machines. Equipped with an abrasive ceramic disk, the ZM101 can expertly sharpen all teeth with profiles. Its robust construction allows it to perform reliably under the most demanding conditions, making it a favorite among our customers. Additionally, its straightforward design ensures ease of use and low maintenance costs, further enhancing its appeal. Technical characteristics: Maximum length of the blade: 6000 (8000) mm Minimum width of the blade: 20 mm Maximum width of the blade: 100 mm Maximum height of the tooth: 12 mm Front angle of the tooth: 0÷25° Tooth pitch: Profile N: 10, 12.5, 15, 20, 25 mm Profile WM: 22, 25 mm Working capacity: 65 teeth/min Size of the abrasive disc: Cut-in sharpening, profile N: ø200 x 10 x ø32, ø200 x 13 x ø32 mm Profile sharpening, profile WM: ø200 x 8 x ø32, ø200 x 10 x ø32 mm Voltage: 380 V Power of the electric motors: 0.09 and 0.37 kW Size: Without band saw holder (L x W x H): 750 x 550 x 1100 mm Bedpexlfwpjfx Ah Ijld With band saw holder (L x W x H): 2000 (3000) x 1000 x 1100 mm

Condition: excellent (used), Year of construction: 2014, Manufacturer: Henrik WINTER HOLZTECHNIK GmbH (Leipzig, Germany) Model / type: SAWMAX 600 Year of manufacture: 2014 Serial number: 130705-28 Bodpfjw R E Slox Ah Iold Power supply: 3×400 V, 50 Hz Maximum power: 1.69 kW Weight: 650 kg Certificate: CE

Condition: used, Year of construction: 2004, Suitable for automatic grinding or re-serration and chamfering of HSS and segment saw blades as well as solid carbide saws with ceramic grinding wheels and deep grinding with CBN or diamond grinding wheels. Accessories: Total enclosure, Sawblade magazine with 3 saw blade stacks each with a stack height of 250 mm (for approx. 35 saw blades each) #9007511, Device for automatic chamfering of sawblades from Ø 145 mm, Automatic threading of the grinding wheel, Automatic fire extinguishing system, Automatic central lubrication, Bsdew I Sk Njpfx Ah Isld Coolant system 400 L with coolant tank with filter system, Machine lamp, Oil collecting tray, 3 sawblade mandrels (loader). Saw diameter: 40-710mm Tooth pitch: 1 - 55mm Number of teeth: 2 - 998 Saw blade thickness: max. 8 mm Grinding wheel diameter: 200x32mm Connected load: 10kW (400V / 50Hz) mass: about 3200 kg Dimensions: L x W x H = 1198 x 1750 x 2015 mm colour: blue/grey RAL 7047 / blue RAL 250-50-20.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 86731, saw blade diameter: 760 mm, tooth pitch: 25 mm, grinding wheel diameter: 200 mm, saw blade width: 8 mm, grinding wheel width: 32 mm, No reserve price – guaranteed sale to the highest bidder! Placing a bid commits you to collect the machine on time between 28.07.2025 and 31.07.2025. TECHNICAL SPECIFICATIONS Saw blade diameter: 140 – 760 mm Saw blade tooth pitch: 1 – 25 mm Number of teeth: 2 – 998 Saw blade thickness: up to 8 mm Grinding wheel dimensions: 200 x 32 mm MACHINE DETAILS Overall width: 1,500 mm Overall length: 1,500 mm Overall height: 2,000 mm Total weight: 1,500 kg Bedpfewvi S Uox Ah Iold Voltage: 400 V Frequency: 50 Hz Rated power: 8 kVA Current consumption: 16 A

Condition: used, Year of construction: 1974, Technical details: total power requirement: 1,65 kW weight of the machine approx.: 620 kg Saw Blade Sharpening Machine Machine not complete - grinding spindle motor missing! for sale as spare part dispenser! Bodpfx Ahowqplke Iold *

Condition: used, Year of construction: 2010, Suitable for automatic grinding of tooth faces, tooth backs, and bases on carbide-tipped circular saw blades in a single setup. All common tooth geometries (flat, alternate, trapezoidal, etc.) can be ground automatically and in a single pass. Accessories: Full enclosure Measuring probe Grinding device with oil cooling Automatic fire extinguishing system Grinding mist extraction system N 183 Alphanumeric keypad Oil drip tray Machine light saw diameter: 80-840 mm Bore diameter: from 10 mm sheet thickness: < 8 mm Tooth pitch: 6 - 120 mm Blodpfx Ahewp Eblj Ijd Cutting length:

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, machine/vehicle number: 137, total width: 2,800 mm, total length: 700 mm, total height: 1,700 mm, type of input current: three-phase, Bandsaw grinding machine Bledpewd N Dasfx Ah Iod Risstaler riv Rivo 200 GA Year of manufacture 1984 Various tooth shapes available Operating instructions included Feed rate 30 or 60 teeth per minute