Wood Machinery Center

Condition: good (used), Year of construction: 2006, functionality: fully functional, 2 units debarking machines: 1x VK5068 and 1x VK32 in TOP CONDITION. VK5068 debarking diameter 100-680 mm / VK32 100-820 mm. Machine with Air-Seal technology, enabling adjustment of knife pressure during the debarking process. Gedpfx Adjzz Tmqetjug

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 2018/219, hole diameter: 75 mm, number of planer blades: 6, operating speed: 6 mm/s, year of last overhaul: 2018, For sale is a very fast and complete Cambio debarking system! In 2018, the machine was completely overhauled, and since then, it has been professionally maintained and equipped with a new knife ring with 6 cutting knives! The system can be directly integrated into your existing mechanization! TECHNICAL DETAILS Maximum log diameter: Ø 750 mm Minimum log diameter: 11 cm Shortest log length without an additional feed system: 3 m Shortest log length with an additional feed system: 1.5 m Maximum feed speed: 100 m/min MACHINE DETAILS Godpfxezx Eaqo Adtsug Rotor motor: 55 kW Feed motor: 11 kW Hydraulic power: 1.5 kW Rotor speed: 220 rpm at 50 Hz Rotor opening: 80 cm Debarking rotor: 6-knife rotor Weight: 10,500 kg EQUIPMENT Complete infeed system Complete outfeed system Electrical system Hydraulics for the infeed rollers New 6-knife rotor from the 2018 overhaul Complete debarking system for integration into an existing mechanization Centering device ZV – 75/2 MA Number of horizontal conical rollers: 2 Drive power per SEW worm gear motor: 1.5 kW EQUIPMENT 2 horizontal conical rollers mounted in pneumatically actuated swivel arms SEW worm gear motors with torque supports in a solid steel design Heavy-duty inlet hopper Complete sensor system Outfeed system AW 800 Drive power: 3.0 kW EQUIPMENT Drive via SEW spur gear motor Machine frame made of welded rectangular tubes for supporting additional machine components Hydraulic shock absorbers

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, For sale is a Balz BG90 debarking system including log infeed. Minimum log diameter: 140 mm Maximum log diameter: 900 mm Shortest wood length: 2000 mm The system was serviced/overhauled in 2024 and integrated into a new sawmill. The system will be replaced by a new system in January 2027. Therefore, the dismantling of the system is scheduled to take place in week 01 of 2027. The system is currently in operation and can be inspected on-site by appointment. Gedpezxgcmefx Adtsug The control cabinet of the system and the log outfeed, including the tilting device, cannot be dismantled as it will continue to be used. Spare motors, as well as rotor arms and knives, are also available for the system. Price upon request!

Condition: reconditioned (used), functionality: fully functional, Log debarker CAMBIO 35. Guedpfxjzwdgme Adtog Equipped with a PIRAMY knife system and a new hydraulic roller tensioning system. Recently underwent a major overhaul.

Condition: excellent (used), Catalog number: 8080 TECHNICAL DATA - log diameter: 60-360mm - min. log length: 1500mm - rotor diameter: 385mm - number of knives: 4 - drive system: PTO shaft - dimensions (L/W/H): 2200x2900x1700mm - weight: approximately 3000kg ADVANTAGES - PTO shaft driven Gedpfxjzu Sype Adteug - for debarking logs - country of origin: Finland - used debarker, very good condition Net price: 38900 PLN Net price: 9262 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to exchange rate fluctuations)

Condition: excellent (used), Catalog number: 8079 TECHNICAL DATA - log diameter 60-360mm - min. log length 1500mm - rotor diameter 385mm - number of blades 4 - drive system: PTO shaft - dimensions (length/width/height) 2200x2900x1700mm - weight approx. 3000kg ADVANTAGES – PTO shaft driven – for debarking logs – country of origin: Finland Guodozu Svwopfx Adteg – used debarker, very good condition Net price: 38900 PLN Net price: 9262 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to fluctuations in the exchange rate)

Condition: ready for operation (used), functionality: fully functional, High-performance rotor debarker designed for efficient and continuous bark removal in sawmill lines. The machine is built for heavy-duty industrial use, ensuring excellent log cleanliness and extended saw blade lifespan. Log Diameter Capacity: 10 - 45 cm The debarker is sold as a complete operational line setup, including the following auxiliary equipment: Log Infeed Ramp (Log Deck) Log Singulator & Step Feeder System Additional Outfeed Head Additional roller conveyor Godpjztqdqofx Adteug It's still conected and working

Condition: ready for operation (used), Log intake with debarker. Below parts included: - Log deck with steep-feeder - In-feed conveyor - Debarker type cambio 73-650 - Out-feed log conveyor with logkicker - Conveyor for bark Gsdpfxjzrdn Ho Adtsug

Condition: used, functionality: fully functional, Machine in working order. Engine: 18 kW. Immediately available. Gjdpszq T Iasfx Adtsug

Condition: reconditioned (used), functionality: fully functional, • Infeed and centering table in front of the machine • 6-36 cm diameter of the roundwood • 1.5 m minimum length of the logs • 1 set of new debarking knives Gjdpfxezn Ulzj Adteug • 1 set of debarking knives as a spare part • 30 kW main motor • 7.5 kW feed gear • Complete electrical system • Machine workshop-tested and newly painted •

Condition: used, We offer this used Cambio 66 shredder. Shredder: Gedpfx Adsy Stw Tstoug Manufacturer: HAGBY BIL & SMIDE AB Type: RWP-14 EU Serial number: 529 Year of manufacture: 2017 If you have any questions or require further information, please send a message or contact us by phone.

Condition: used, Year of construction: 2005, operating hours: 27,000 h, functionality: fully functional, working width: 900 mm, number of blades: 5, power of feed motor: 22 W, ZE 905 in good condition. Sale by customer order! Max. pass-through 90 cm. Feed speed 32 m/min. Central lubrication. Regular service always performed. Runs very smoothly and can be inspected in operation. Machine is being replaced by a new one with Variopress system! Gjdey R Avvspfx Adtoug

Condition: refurbished (used), Year of construction: 2001, Balz Debarking Machine BG 90 6W-GR Year of manufacture: 2001 Completely overhauled in 2022 and not reassembled afterwards Minimum diameter: 14 cm Maximum diameter: 90 cm With conveyor systems for infeed and outfeed Guodjy Iabdspfx Adtsg Immediately available – Fully overhauled Location: Austria, near Linz

Condition: new, Year of construction: 2026, functionality: fully functional, feed rate Y-axis: 45 m/min, working width: 1,100 mm, number of blades: 5, power of feed motor: 22 W, Debarker ZE 1105 Vario Gedpfjyyv Dfox Adtoug For round timber up to 110 cm! In the short wood variant from 1.80 meters log length! Perfect debarking result thanks to pressure adjustment of the knives during operation. All functions are performed hydraulically. Many adjustment options during operation, e.g. via radio remote control. Opening of knives in case of malfunctions at the push of a button. As a full-service supplier for log yards, we can offer you an individual and non-binding quotation for complete log yard solutions.

Condition: new, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 2008-176, The Cambio 500 (Söderhamn Eriksson) is a debarker for small logs up to 495 mm (20 inches) in diameter. It operates at feed speeds of up to 120 m/min (393 ft/min). Thanks to its reliability, minimal maintenance requirements, and ultra-low operating costs, the Cambio 500 is the first choice for leading wood processing companies worldwide. Its triangular feed system and carbide-tipped debarking tools, powered by compressed air, are among the key features that ensure superior debarking results. Complete with a feed conveyor. The machine was not in operation and was in storage. Gusdpfx Adoyl Aqhetjg

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, Balz BG 90 with feed block conveyor Still in use today Min. log diameter: 140 mm Godpeygli Njfx Adtjug Max. log diameter: 900 mm Shortest wood length: 2000 mm Feed speed: 10 or 16 m/min Rotor with 5 knives

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 11598-A, overall weight: 3,900 kg, input frequency: 50 Hz, input voltage: 380 V, We are offering this used TAYME P-60 debarker, year of manufacture 2011. Technical Data – Debarker TAYME P-60 Peeling Machine (Year 2011) Manufacturer: TAYME S.A. Model: P-60 Machine type: Log debarker / Peeling machine Year of manufacture: 2011 Serial number: 11598-A Weight: 3,900 kg 1. Mechanical Specifications Tool type – Peeling heads with toothed knives Maximum pressure – 400 bar 2. Electrical Specifications Rated voltage – 380 V (three-phase) Frequency – 50 Hz Estimated power – approx. 25 kW 3. Hydraulic System Hydraulic flow rate – 22 l/min (according to nameplate) Maximum pressure – 400 bar System type – Stand-alone hydraulic unit with tank and three-phase motor Gjdpfx Adoycutcetoug 4. Main Function Industrial machine designed for: - Debarking logs of various diameters - Preparing wood for pallets, packaging, chipping, or primary processing - Peeling through toothed heads and hydraulic pressure The machine is located in Valencia, Spain, and is ready for loading and shipping worldwide. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: refurbished (used), functionality: fully functional, The VK820 two-rotor machine is equipped with 620 mm rotors and comes complete with the VK600 feeding conveyor and a hydraulic power unit. The debarker has been fully refurbished in our workshop and is in excellent working condition. Gjdjx Dip Hjpfx Adteug Alternatively, depending on the client’s needs, the rotors can be replaced with 480 mm rotors.

Condition: as good as new (ex-display), Year of construction: 2025, HÄWA / SWT Maschinenbau Debarking Machine – New -- ---Demonstration unit --- Immediately available - Made in Germany - Model H256 / 800 - Manufactured from a heavy welded steel construction - 4 pairs of main log drive wheels - 1 split, toothed pair of main log drive wheels - Frequency-controlled log drive - Milling arm made from a heavy steel construction - Milling head: working width 300mm, impact bars, impact knives, and guide ring - Milling head equipped with carbide inserts Gjdpfjxx Am Ujx Adtjug - Hydraulic lowering of the milling head - Frequency-controlled feed for milling head - Log drive wheels 800mm - Log diameter 0.2m – 1.0m - Log length 1.0m – 6.0m - Total connected load 35kW - With HBC radio remote control

Condition: excellent (used), Year of construction: 1998, COMPLETE WOOD DEBARKING PLANT ENTRIENDUNGSMASCHINE SEGEM ERT110.5, FEEDTHROUGH 110 CM, 5 KNIVES Guedpfx Adoxvluvotog

Condition: used, Söderhamns Rotary Debarker Cambio 85 - 66 - A Diameter: 10 - 66 cm Gusdpfxsxtc Afe Adtjg Main motor: 30 kW

Condition: ready for operation (used), functionality: fully functional, The following components of the machine have been renewed: Feed gearbox: overhauled in 2023 Rotor: factory-refurbished, installed in 2024 Hydraulic roller opening: installed in 2022 Extraction unit: newly installed in 2021 Infeed table: year of manufacture 2021 TECHNICAL DETAILS Rotor: Air ten, 800 mm Max. log diameter: approx. 75 cm MACHINE DETAILS Overall length: 9,800 mm Gusdsxr Ityjpfx Adtjg Wheelbase: 8,800 mm EQUIPMENT Spare parts package Note: An electrical control cabinet is not included in the offer. However, the seller can supply a new control cabinet for an additional charge.

Condition: refurbished (used), Debarking machine Valon Kone VK - 450 2RE Debarker with infeed conveyor, for log size either up to 450 mm, reducer rotor and debarking rotor. The debarking rotor bearing is new.. Gsdexhdtzepfx Adteug The machine has been overhauled. 6-month warranty

Condition: used, Year of construction: 1997, VK 550 Combi 3R Debarker-Reducer Combination Gedpjw Hy E Tsfx Adtsug VK 550 frame with one ring reducer rotor and two counter-rotating debarker rotors. Debarker rotor opening: 620 mm. Service-friendly pull-out rotors for quick and safe maintenance. Ring changer for reducer ring.

Condition: used, Year of construction: 1999, functionality: fully functional, feed rate X-axis: 75 m/min, Min. log diameter: 11 cm Max. log diameter: 75 cm Feed speed: 75 m/min Rotor speed: 222 rpm Rotor motor: 75 kW Feed motor: 2.2 kW Hydraulic unit: 1.5 kW Infeed (to conveyor) and outfeed (wheel set) are included. In 2021, the rotor was completely replaced with a factory-overhauled rotor (invoice available). Control cabinets are not included! Guedpfx Adow Emhfotjg Year of manufacture is estimated to be the late 1990s. Videos of the machine can be sent.