Frank Marpert M.A.S

Condition: excellent (used), tool taper / shaft cross cut / tool taper / Manufacturer: EPPINGER GmbH Model series: PRECI-FLEX® Iedpfx Adoy S Eayjkjtg EPPINGER PRECI-FLEX R78691B DRIVEN TOOL Serial number: 34143-5 Reference number: R78691B Transmission ratio: i = 1:1 Maximum speed: n_max = 5000 rpm L1 dimension: 99.99 mm Condition: Very good

Condition: excellent (used), tool taper / shaft cross cut / tool taper / Manufacturer: EPPINGER GmbH Model series: PRECI-FLEX® EPPINGER PRECI-FLEX R78684B DRIVEN TOOL Serial number: 74028-10 Reference number: R78684B Transmission ratio: i = 1:1 Maximum speed: n_max = 6000 rpm Isdpfxey S Dvao Adkotg L1 dimension: 70,00 mm Condition: Very good

Condition: excellent (used), tool taper / shaft cross cut / tool taper / Manufacturer: EPPINGER GmbH Model series: PRECI-FLEX® EPPINGER PRECI-FLEX R78684B DRIVEN TOOL Itedpfjy S Dqwjx Adksg Serial number: 61668-6 Reference number: R78684B Transmission ratio: i = 1:1 Maximum speed: n_max = 6000 rpm L1 dimension: 70,01 mm Condition: Very good

Condition: excellent (used), tool taper / Itsdpfxoy S Dqqo Adkeg shaft cross cut / tool taper / Manufacturer: EPPINGER GmbH Model series: PRECI-FLEX® EPPINGER PRECI-FLEX R78684B DRIVEN TOOL Serial number: 42034-2 Reference number: R78684B Transmission ratio: i = 1:1 Maximum speed: n_max = 6000 rpm L1 dimension: 70 mm Condition: Very good

Condition: excellent (used), tool taper / shaft cross cut / tool taper / Manufacturer: EPPINGER GmbH Model series: PRECI-FLEX® EPPINGER PRECI-FLEX R78691B DRIVEN TOOL Serial number: 34143-6 Reference number: R78691B Transmission ratio: i = 1:1 Maximum speed: n_max = 5000 rpm L1 dimension: 99.99 mm Condition: Very good Isdpoy S Dqkjfx Adketg

Condition: used, HPC BS61 Air Compressor, Working Pressure 7.5 Bar, Hours 73924 Load 19502 (at time of catalogue) Location: These lots are located in Dundee, Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Iedpfxey Shbao Adkstg

Condition: excellent (used), functionality: fully functional, We are offering a used EROWA UPC chuck here. EROWA ER-070649 UPC chuck with ITS Chuck 100P. The chuck was mounted on a measuring machine and thus was not subject to load or contamination. The clamping plate is in very good condition and fully functional. Inspection possible by appointment. Shipping and inspection available! Isdpfx Adey Rzx Njkotg

Condition: good (used), functionality: fully functional, We are offering a used EROWA UPC chuck here. ER-016093. Clamping force: 32,000 N. UPC dimensions: 320 x 300 x 64.5 mm. The UPC chuck is in good condition and fully functional. Inspection by appointment is possible. Shipping and inspection available! Iodpfx Adoy Rzttjkstg

Condition: excellent (used), functionality: fully functional, I am selling several Erowa clamping systems for the UPC or ITS 50 system. Isdpey I Dkcofx Adketg

Condition: excellent (used), Tool holders SK 50 DIN 280 Stock number (28638) Iodpfx Aoy Invvedketg 20 units as a package: 220 euros Transport and storage trolley: 150 euros Transport trolley dimensions: Width 800 mm Depth 600 mm Height 840 mm

Condition: good (used), amount 42 STK - Various KOMET tool holders, partly holder with ABS connection - including tightening bolts (41 pcs.) Itsdpfxsy H Nzdo Adkog and various other tool holders, including storage and transport trolley transport trolley Year of manufacture: unknown

Condition: good (used), Internal item no.: 26039 160x SK40 (DIN 69871) tool holders Including collet chucks, drill chucks, Weldon holders, face mill holders, SK40-MK Itodpfx Adey Hpqfokog Dimensions (LxWxH): 80 x 65 x 200 cm Weight: approx. 500 kg The tool holders are in well-maintained condition and can be inspected by arrangement on over 500 m² of heated storage space.

Condition: excellent (used), functionality: fully functional, All listed Eppinger items are suitable for an Okuma LT200-M and LT10-M, among others. All items are available in larger quantities. Condition: very good • Boring bar holder 7.030.180, angled, left-right, cylinder mounting Ø32, external and central coolant supply Manufacturer: Eppinger • M angle heads 90° 3.200.653, drilling and milling head angled right, collet chuck ER25A, external coolant Manufacturer: Eppinger • M tool holder, straight 180° 3.200.409, drilling and milling head, straight, short, collet chuck ER25, external coolant Manufacturer: Eppinger • External holder 7.030.177, angled tool holder left - right multiple, square shank mounting, external coolant Manufacturer: Eppinger • M angular holder 90° with fine swivel adjustment 2x90° / 2x30°, 3.200.295, angle adjustable, drilling and milling head, straight, angle adjustable, collet chuck ER20A, external coolant Manufacturer: Eppinger • External holder, straight tool holder, multiple, 7.030.176, square shank mounting, external coolant Ijdpfx Ajy Hkk Hedketg Manufacturer: Eppinger • Parting holder, universal rotation direction, parting holder, universal rotation direction, external and central coolant supply Manufacturer: Eppinger

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, tool type: HSK 100, We are offering a comprehensive lot of approximately 200 HSK-100 tool holders in various versions for sale. These tool holders come from productive use on a WFL Millturn M 100 and were utilized there for a range of turning, drilling, and milling operations. The inventory includes tool holders from different years of manufacture, approximately from 2006 to 2020. The scope of supply includes tool holders and systems from renowned manufacturers such as BENZ, Gühring, Wohlhaupter, and other established brands. Included are various types, such as milling holders, drilling and boring tools, special holders, adapters, and other HSK-100 tooling devices. The attached photos show the tool holders both in their previous mounted use on the machine or at the operator station, as well as in their current stored condition in our warehouse. This lot is especially suitable for operators of WFL Millturn machines or other comparable machining centers equipped with HSK-100 interfaces. An inspection can be arranged by appointment. Additional detailed photos of individual tool holders, manufacturer markings, or nameplates can be provided upon serious inquiry. Itodpfxey Hfnme Adkog

Condition: new, Year of construction: 2026, Bore 25 mm number 6 Dimensions (LxWxH) 155 x 140 x 130 mm weight - pallet system 14 kg Itodpfx Adsy Ehv Rskjg Two new Toolholder for BMT 65 turret Price for each toolholder 6x Ø 25 mm bore extern and internal coolant Haas ST- line / BMT 65 for Dooasan, Haas, Hwacheon

Condition: excellent (used), functionality: fully functional, VDI40 turning tool holder – CAPTO C4 clamping units Manufacturer: SANDVIK COROMANT Type: VDI40-CAPTO C4 set Mounting: Ø 40 mm ----- Consisting of: Item 1 → No.: 1405 = 2 x VDI40 steel holder mount C4 No. C4-RC2040-51030 Weight/unit approx.: 4 kg Unit price (net): €350/unit ----- Toolholders and indexable insert holders available on request Itodpfx Aoy Apm Ejdksg

Condition: used, tool adaptor Sk 50 weight . kg material . Approx. 48 pieces Iodsyyc Abjpfx Adkstg The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, tool adaptor Sk 50 weight . kg material . Approx. 48 pieces The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Itjdeyycz Rspfx Adkeg We look forward to your visit. Your Markus Hirsch Team

Condition: used, tool adaptor Sk 50 weight . kg material . Approx. 48 pieces The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, Itsdpeyycz Dofx Adkeg please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: new, Self-centering 4-jaw chuck designed for mounting on lathes, rotary tables, and milling machines. Mounting according to DIN 55029. Hardened and ground working surfaces ensure a longer service life while maintaining accuracy and repeatability. Balanced scroll plate and chuck allow for higher rotational speeds during machining without excessive vibration. Mounts directly to the machine on a CAMLOCK-type spindle nose. Technical data: Parameter Value Unit Lathe chuck cast iron 4-jaw 3744 BISON A 200 mm Ratio 1:4 5 mm B 78 mm E 55 mm F 104.8 mm Q 6 J 29 mm Weight 19 kg Equipment: Lathe chuck Itjdpfx Ajyw Tupsdkjg One-piece hard external jaws One-piece hard internal jaws Key

Condition: like new (used), Threaded steel holder, Manufacturer KOMET, Type FG Iodpfeyu Rrfjx Adkotg 1 x Type FG II 1 x Type FG III 1 x Type FG IV 1 pc. insert for FG IV

Condition: excellent (used), functionality: fully functional, Various as-new VDI40 tool holders with cylindrical receptacle, used tool holders in excellent tested condition, top quality, various manufacturers including e.g. ISCAR. Pos. 1) Order number: 401_404_E2 Available: 4 pcs Tool holder for cylindrical tools / boring bars / drills: Receptacle diameter: 32mm Price each: €45.00 Pos. 2) Order number: 405_E2_01 Available: 1 pc Tool holder for cylindrical tools / boring bars / drills: Receptacle diameter: 31mm Price each: €45.00 Pos. 3) Order number: 406_407_408_E2_03 Tool holder for cylindrical tools / boring bars / drills Available: 3 pcs Receptacle diameter: 25mm Price each: €45.00 Pos. 4) Order number: 409_E2_01 Tool holder for cylindrical tools / boring bars / drills Available: 1 pc Receptacle diameter: 20mm Price each: €45.00 Pos. 5) Order number: 410_411_E2_02 Tool holder for cylindrical tools / boring bars / drills Available: 1 pc Receptacle diameter: 8mm Price each: €45.00 Dimensions: D = 83 mm d-2 = 83/40 mm (45.52 mm) Isdpfjyuv Uljx Adkjtg d-4 = xx (8,10,12,20,25,32,40 mm) internal diameter H = 32.5 mm L1 = 75 mm L2 = 22 mm l-4 = 53 mm Form E2 For drilling tools with cylindrical shank With internal as well as external coolant supply Surface hardened, black oxidized and ground

Condition: used, tool adaptor VDI 40 weight . kg Iodpfx Adsyukffskstg material . Approx. 35 pieces The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Technical details: Tool holder shaft type: HSK-A 100 Tool holder shaft type: Wohlhaupter Tool holder shaft type: Feindrehwerkzeuge Ausdrehkopf / Precision Turning Big selection of Wohlhaupter HSK-A 100 Tool holders / precision turning tools / adapters /extenders etc. for sale Sales list with prices upon request. * Iodpjyug Ebefx Adkstg

Condition: excellent (used), functionality: fully functional, ----- Pos1→ No.: 1405 *1x VDI40→C4 tool holder in as-new condition No. C4-RC2040-51030 Weight/unit: approx. 4 kg Unit price net: €350/each ----- As-new various tool holders: total of 12 holders 3x internal turning tool holders → €150/each 8x external turning tool holders → €150/each _____ Turning tool holder, tool holder, lathe tooling, tool post holder, tool holder, -Various types: see photos, additional pictures available on request -The package will only be sold as a complete set Ijdsyub Eispfx Adkstg Shipping costs on request