Juriy Jakob, Beratender Ingenieur

Condition: used, Year of construction: 2021, OFFERS CONSIDERED PRIOR TO AUCTION 1200mm Stainless Steel Mobile Rotary Collecting Table 240 Volt with 380mm Mobile Conveyor, 240 Volt. Factory No. 21-204C (07/2021) Location: These lots are located in Burnham-on-Crouch, Essex, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Fsdsy Rzpzspfx Ad Nspg

Condition: excellent (used), SCM SI 400 EP panel saw Sliding table 320 cm, Motorized tilting 0–45 degrees Motorized up/down blade adjustment, Fpjdpfxey Rzpho Ad Nog Right-side rip fence motorized adjustable up to 1500 mm, Manual scoring unit adjustment, 9 kW motor, 3 blade speeds, Max blade diameter 400 mm, Sliding table fence adjustable for angle Used machine, in very good condition.

Condition: excellent (used), Year of construction: 1999, power: 3 kW (4.08 HP), total width: 1,100 mm, total length: 2,600 mm, total height: 2,200 mm, table width: 800 mm, table length: 1,150 mm, overall weight: 1,800 kg, Radial arm drill MAS - VO 32 MACH-ID 9618 Make: MAS Type: VO 32 Year: 1999 Arm Length: 1000mm Max. drill Ø cast: 40mm Max. tap Ø: 24M Max. drill Ø steel: 32mm Stroke pinole: 250mm Max. distance spindle - table:860mm Min. distance spindle - table:320mm Speeds / ranges: 4500Rpm Fsdpfxey Rznwe Ad Nopg Table Length: 1150mm Table Width: 800mm Power: 3kW Length: 2600mm Width: 1100mm Height: 2200mm Weight: 1800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: 0240070779, functionality: fully functional, input voltage: 380 V, input current: 48 A, input frequency: 50 Hz, type of input current: AC, cutting height (max.): 80 mm, cutting width (max.): 4,100 mm, Equipment: documentation/manual, scorer, The machine is in good condition and can be inspected in operation at any time. Fpedpjy Rznkofx Ad Nog

Condition: good (used), Motan Minicolor S1 T Fpjdpfx Adjy Rznde Njg

Year of construction: 2022, condition: used, OFFERS CONSIDERED PRIOR TO AUCTION Fedpfxjy Rzm Ts Ad Nspg Mini Linear Doypack 210 Filler with Pouch Cassette to Infeed Open, Fill and Seal Pouch, capable of 200g - 1kg Size Pouches, 1000kg in 1 Hour, capable of consistent weights within 2-3 grams depending on the product type. S/No. 22SDM004 (2022). Country of Origin: United Kingdom Location: These lots are located in Burnham-on-Crouch, Essex, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 10/2021, total length: 14,040 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22.5, wheelbase: 9,060 mm, Year of construction: 2021, Axle configuration Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Tire size: 385/65R22.5; Lift axle; Max. axle load: 9,000 kg; Axle brand: SAF CD; Tire tread left: 50%; Tire tread right: 50% Rear axle 2: Tire size: 385/65R22.5; Max. axle load: 9,000 kg; Axle brand: SAF CD; Tire tread left: 50%; Tire tread right: 50% Rear axle 3: Tire size: 385/65R22.5; Max. axle load: 9,000 kg; Axle brand: SAF CD; Tire tread left: 50%; Tire tread right: 50% Fpedpfoy Rzm Hex Ad Neg Weights Unladen weight: 7,880 kg Payload: 34,120 kg Gross vehicle weight: 42,000 kg Maintenance, history and condition APK (General Technical Inspection): valid until 07/2026 Damage: Damaged vehicle (not operational) Identification Registration number: OS-22-YP Further information Please contact Mark van der Steen or Bob Beukers for more information.

Year of construction: 2014, condition: ready for operation (used), travel distance X-axis: 530 mm, travel distance Y-axis: 230 mm, number of axes: 2, Surface grinding machine manufactured in 2014. This OKAMOTO ACC 42 SA-iQ features a working surface of 450 x 200 mm and a longitudinal stroke of 530 mm. It includes a maximum weight capacity on the table of 120 kg and a standard grinding wheel diameter of 205 mm. If you are looking to get high-quality grinding capabilities, consider the OKAMOTO ACC 42 SA-iQ machine we have for sale. Contact us for further details. Fpodpfx Adoy Rzmys Nog • Working surface: 450 x 200 mm • Magnetic chuck surface: 400 x 200 mm • Longitudinal stroke: 530 mm • Longitudinal feed: 0.1–25 m/min • Cross stroke: 230 mm • Intermittent automatic cross feed: 0.5–20 mm • Continuous automatic cross feed: 0–1000 mm/min • Manual handwheel graduation (cross): 0.0001 / 0.001 / 0.01 mm • Vertical stroke: 357 mm • Rapid vertical feed: 0–1000 mm/min • Manual handwheel graduation (vertical): 0.0001 / 0.001 / 0.05 mm • Automatic increment range: 0.0001–0.03 mm • Distance between spindle axis and table surface: 22–303 mm • Max weight on table (including chuck): 120 kg • Standard grinding wheel diameter: 205 mm • Max peripheral speed: 1000 / 3600 m/min • Spindle motor: 2.2 kW • Hydraulic pump motor: 0.75 kW • Cross feed motor: 0.75 kW • Head elevation motor: 0.75 kW • Net machine weight: 2,090 kg • Floor dimensions: 2,270 x 2,781 mm

Year of construction: 2022, condition: used, OFFERS CONSIDERED PRIOR TO AUCTION Fsdpfx Adjy Rzlvo Nopg Mini Linear Doypack 410 Filler with Pouch Cassette to Infeed Open, Fill and Seal Pouch, Capable of 5kg Size Pouches, 600kg in 15 Minutes, capable of consistent weights within 2-3 grams depending on the product type. S/No. 22SDM005 (2022). Country of Origin: United Kingdom Location: These lots are located in Burnham-on-Crouch, Essex, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described

Condition: like new (used), Clamping device for spacer frames Weight: 1338 g Fpjdjy Rzlpepfx Ad Nsg Condition: Like new

Condition: used, mileage: 789,870 km, power: 368 kW (500.34 HP), first registration: 10/2018, fuel type: diesel, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, Year of construction: 2018, Unladen weight: 7,885 kg Payload: 11,115 kg Fodpfx Asy Rzlied Nepg Gross vehicle weight (GVW): 19,000 kg Damages: none

Condition: used, first registration: 01/2014, color: other, Year of construction: 2014, Damage: none Fpodpfey Rzlcsx Ad Njg

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 121.29.90.28 0595, total length: 1,100 mm, total width: 850 mm, total height: 2,600 mm, working height: 850 mm, input voltage: 380 V, overall weight: 520 kg, load capacity: 150 kg, type of input current: three-phase, space requirement width: 1,200 mm, space requirement length: 1,500 mm, space requirement height: 2,800 mm, power: 1.1 kW (1.50 HP), Equipment: documentation/manual, A professional and reliable solution for filling spacer bars (aluminum and Thermix) with desiccant, designed for insulating glass (IGU) production facilities. Superior Precision: An automated drilling and filling system ensures the optimal amount of desiccant within the frame. Integrated Sealing: The machine automatically seals the openings with butyl after filling, ensuring a hermetic seal. Austrian Quality: A product from the world-renowned leader LiSEC, known for longevity and robust construction capable of continuous industrial operation. General Data: Manufacturer: Peter LiSEC Ges.m.b.H. (Austria) Model/Type: A1RL Serial Number: 121.29.90.28 0595 Year of Manufacture: 1995 Machine Weight: 520 kg Voltage: 380V - 3/N~ 50Hz (three-phase system) Connected Load: 1.1 kW Operating Pressure: 6 bar (pneumatic system) Maximum Load: 150 kg/m Performance and System: Fpodpey Rzkxofx Ad Nsg Function: Automatic drilling of the back of the spacer, granulate filling, and butyl sealing. Compatibility: Suitable for all standard aluminum and stainless steel (inox) spacer bars. Operating System: Pneumatic-electric drive with an automatic filling cycle. Stability: Massive construction with a transport system that enables processing of large frame formats. Condition: The machine is visually in very good condition and has been maintained according to professional standards. Due to its robust construction, the A1RL model is considered one of the most reliable in the glass processing industry. The machine is sold with all relevant documentation and a set of spare parts. Note: The machine will be available starting from August 2026. For more information, please call: +387 63 335 445

Condition: excellent (used), MECOF AGILE CS 500 TNC 640 Boring Mill in technically flawless condition Technical Data: - Spindle taper: ISO 50 - Longitudinal travel: 6000 mm - Cross travel: 1250 mm - Vertical travel: 1700 mm - Table size: 7300×1090 + (2 CUBI 1520×1000) mm - Spindle speed: 4000 rpm - CNC model: fidia CXR - Tool changer capacity: PICK UP UTENSILI 10 POSITIONS (5 ISO 50 – 5 HSK 50 E) - Power: 30 kW spindle Fjdpfjy Rzklox Ad Nspg The MECOF AGILE CS 500 TNC 640 offers a wide range of features and technical specifications to meet the most diverse requirements. With a longitudinal travel of 6000 mm and a cross travel of 1250 mm, it enables precise drilling and milling operations on large workpieces. The 1700 mm vertical travel ensures maximum flexibility and allows for machining at various angles. The table has a size of 7300×1090 mm and is supplemented by two additional cubes measuring 1520×1000 mm each. In this case, the machine has been installed at floor level. The boring mill is equipped with a powerful 30 kW spindle motor with a maximum spindle speed of 4000 rpm. The fidia CXR CNC control provides precise programming and easy operation. The tool changer with 10 positions (5 ISO 50 – 5 HSK 50 E) allows for fast tool changes to optimize your production process. The machine has been regularly serviced and is in technically excellent condition. It can be inspected under power or during ongoing production. Extensive accessories included. Additional pictures available. Dismantling, removal, shipping, and reinstallation can be organized upon request.

Condition: excellent (used), CATALOG NUMBER 6679 TECHNICAL DATA - Maximum workpiece width: 250 mm - Maximum workpiece height: 170 mm 6 spindles: 1) Lower horizontal 250 mm 5.5 kW 2) Right vertical 170 mm 5.5 kW 3) Left vertical 170 mm 5.5 kW 4) Upper horizontal 250 mm 7.5 kW 5) Lower horizontal 250 mm 7.5 kW 6) Universal 250 mm, 360° adjustable, 5.5 kW - 6th spindle electrically adjustable up/down - All spindles adjustable up/down, right/left - Spindle diameter: 40 mm - Top: 6 powered, toothed, infeed rollers including 2 double rollers - Top: 6 powered, rubber, smooth, outfeed rollers including 2 double rollers - Top: 2 hold-downs - Bottom: 1 powered, toothed, swivelling infeed roller before the first spindle - Bottom: 2 powered, metal, smooth outfeed rollers - Bottom: 4 lateral pressure rollers - Feed drive using Cardan shafts - Pneumatic pressure rollers - Infinitely variable feed speed via inverter: 6–30 m/min - Feed motor: 4 kW - Working pressure: 8–10 bar - Electric thickness adjustment - Lifting motor: 1.1 kW - Central table lubrication - Infeed table length: 2180 mm - Extraction port diameter: 6 x 150 mm - Dimensions (L/W/H): 5000 x 1800 x 1900 mm - Weight: approx. 4600 kg ADVANTAGES – Italian manufacture – 6-head configuration – Full DTR technical documentation + CE certification – Ideal for both wet and dry wood – Universal spindle – Excellent condition / as new Net price: 134,900 PLN Net price: 32,100 EUR Fpjdpfjy Rzkfex Ad Neg Net price calculated at 4.2 PLN/EUR (price may vary in case of significant exchange rate fluctuations)

Condition: used, Year of construction: 2005, Horizon StitchLiner SL-5500 The Horizon StitchLiner 5500 is a powerful all-in-one solution for booklet production. Creasing, folding, stitching, and three-knife trimming in a single, efficient process. With its user-friendly operation, high productivity, and versatility, this system offers numerous benefits for print shops, binders, and on-demand printing. This StitchLiner 5500 includes the following components: - 1x HOF-20 - 1x ACF-30 - 1x SPF-30 - 1x HTS-30 Key Features: Fodpfx Adjy Rziue Nepg - Variable data processing: Handles personalized prints and variable page counts, ideal for digital printing - Fully automatic format adjustment for quick job changes - Touchscreen for user-friendly operation, even for less experienced operators Specifications: - Sheet sizes: Max. 500 x 350 mm, Min. 148 x 120 mm - Paper weight: 40-350 gsm - Processing thickness: 8-200 pages (max. 5 mm spine thickness) - Production speed: Up to 5,500 booklets/hour - Stitch distance: 60-150 mm Technical Details: - Trimming (untrimmed): Max. 350 x 250 mm, Min. 140 x 103 mm - Trimming (trimmed): Max. 312 x 230 mm, Min. 120 x 95 mm - Power supply: 400V / 50Hz - Space requirement: Min. 5,709 x 3,240 mm - Total weight: Approx. 2,500 kg All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price

Condition: excellent (used), Laboratory Equipment / Chemical Laboratory / Laboratory Workstations Manufacturer: Köttermann Version: Laboratory Workstations / Laboratory Benches / Laboratory Island Location: 44319 Dortmund Type of Sale: Sale from site Special Features: Individual items can be sold / Loading available at buyer's expense A comprehensive range of laboratory equipment from an industrial site closure is available for sale. The laboratory installation consists of several laboratory benches, a laboratory island, and a fume hood in a modern industrial design. The equipment is ideally suited for chemical laboratories, research, development, quality assurance, education, industry, and pilot operations. Included equipment: - Köttermann fume hood - Laboratory workstations / benches - Laboratory island with sink - Multiple sinks and fittings - Drawer and base cabinet elements - Laboratory worktops - Media connections / laboratory utilities - Extraction system / piping - Laboratory accessories as per images Technical data according to nameplate / images: Köttermann fume hood Manufacturer: Köttermann Type: 2-401-GBAAAY Serial No.: 2-401-024880 Item No.: 2-401-1013076 Voltage: 230 / 400 V Current consumption: 16.0 A Frequency: 50 – 60 Hz Made in Germany Laboratory installation with multiple workstation areas Heavy-duty industrial design Large number of drawers and ample storage space Laboratory island with integrated sinks Extraction and media supply systems available Actual technical data, dimensions, and weights may vary. Equipment includes: - Laboratory workstations - Laboratory island - Fume hood - Sinks and fittings - Base cabinets and drawer units - Laboratory worktops - Extraction connections - Media utilities - Industrial design Condition: Used laboratory equipment with age and usage-related signs of wear. Visual condition as per images. The equipment is from an operational laboratory environment. Scope of delivery: Laboratory equipment as shown Fume hood, laboratory benches, laboratory island, and accessories Scope of delivery exclusively as visible in the images Notes: Viewing by prior appointment is possible. Individual sale of laboratory equipment is possible. Loading can be arranged by agreement at buyer’s expense. Fpedpsy Rzinefx Ad Nog All information is provided without guarantee. Commercial sale – sold without warranty. Subject to change, prior sale, and errors.

Condition: new, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 8,999 kg, first registration: 04/2026, loading space length: 20,640 mm, loading space width: 2,540 mm, loading space height: 2,830 mm, total length: 20,640 mm, total width: 2,540 mm, total height: 2,830 mm, suspension: air, tire size: 385/65-R22.5, color: red, Year of construction: 2022, Equipment: ABS, = Additional Options and Equipment = - BPW axles - EBS - Lift axle - Air suspension - Drum brakes = Notes = New and unused Kässbohrer flatbed semi-trailer with ABS/EBS. BPW axles with drum brakes, extendable by 6.90 m, 3rd axle = steering axle (non-driven trailing axle), hardwood floor with 6 twistlocks per side, 11 lashing rings per side, 10 stake pockets per side, lashing points in the longitudinal beams, 1 toolbox, steps on the right, unladen weight: 10,170 kg, gross vehicle weight: 45,000 kg, tyres: 385/65-R22.5 (Tread depth L: 16/16/16 mm; R: 16/16/16 mm), Dutch registration with valid general inspection until 29.04.2027, year of manufacture: 11/2022 = Further Information = Axle configuration Tyre size: 385/65-R22.5 Brand of axles: BPW DRUM Brakes: Drum brakes Fodpfxey Rzh Rs Ad Njpg Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9,000 kg; Tyre tread left: 100%; Tyre tread right: 100% Rear axle 2: Max. axle load: 9,000 kg; Tyre tread left: 100%; Tyre tread right: 100% Rear axle 3: Max. axle load: 8,999 kg; Steering; Tyre tread left: 100%; Tyre tread right: 100% Weights Unladen weight: 10,170 kg Payload: 34,830 kg GVW: 45,000 kg Functional Body manufacturer: Kässbohrer LB3E Extendable body: Yes Condition General condition: Very good Technical condition: Very good Optical condition: Very good Further information Please contact Arne Honingh for more information.

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: P240207155, BWU 1100 (2015) BWU 1100 (2017) Maximum air pressure: 600 kPa Euroline – optimized for garbage bag production - Basic converting line for garbage bag manufacturing with non-driven C-folder - Can be configured in-line or off-line – with or without surface unwinder - Flexible unit, easy to operate and maintain - Servomotor drive - Combination of proven FAS converting modules - Double-sided sealing with single sealing bar - Unique tension-free sealing system - Optionally equipped with PP insert and TU220 tape unit Information sourced from online documentation (also enclosed with this advert) Max. main roll diameter, mm [in]: 800 [31.5] Max. sealed tape width, mm [in]: 1060 [41.7] Bag length, min-max, mm [in]: 600-3000 [23.6-118] Machine speed, m/min [fpm]: 20-100 [65.6-328] C-bend, mm [in]: 220-620 [8.7-24.4] Max. cycles/min: 160 Web rewinding, mm [in]: 100-500 [3.9-19.7] Max. roll changes/min: 8 Max. roll diameter, mm [in]: 200 [7.9] Installed power, kW [A]: 5 [9] Air supply, bar [psi]: 6, 13 l/roller change [87 to 3.7 scfm] L x W x H, mm [in] BWU: 4487 x 2157 x 2356 [177 x 85 x 93] Weight, kg [lbs] BWU: 2540 [6350] Fpjdjy Rzhdepfx Ad Nog * Mechanical. Maximum output speed depends on the material being processed. With TU220 belt unit: max. 6/min. Price per machine. Please note that this description may have been automatically translated. Contact us for further details. The information in this classified ad is for guidance only. We recommend verifying details with the seller prior to purchase.

Condition: excellent (used), Catalogue number 6765 TECHNICAL DATA - max. working width of element: 230 mm - max. working height of element: 160 mm Number of spindles: 4: 1) lower horizontal, 230 mm, 5.5 kW 2) right vertical, 160 mm, 5.5 kW 3) left vertical, 160 mm – electrically adjustable left/right from the control panel, 5.5 kW 4) upper horizontal, 230 mm – electrically adjustable up/down from the control panel, 7.5 kW - all spindles adjustable up/down, left/right - spindle diameter: 40 mm from the top: - driven infeed rollers, geared, 6 pcs (incl. 2 double rollers) - driven outfeed rollers, rubber-coated, 2 pcs from below: - infeed roller, driven, geared, metallic, swiveling in the lower table - outfeed roller, driven, metallic, smooth - pneumatically adjustable rollers - length of infeed table (with pneumatic feeder): 3390 mm - possible operation without activating the pneumatic feeder; the table is height-adjustable - central lubrication - electric thickness adjustment - variable feed speed adjustment - feed via cardan shafts - feed motor: 4 kW - enclosed in cabin - extraction port diameter: 4 x 120 mm - dimensions (L x W x H): 7000 x 1950 x 1700 mm - weight: approx. 3000 kg - suitable for wet and dry wood - pneumatic feeder on the infeed table Fodpsy Rzgyjfx Ad Nspg - second-hand planer, in very good condition Net price: 89,900 PLN Net price: 21,400 EUR Net price calculated at exchange rate 4.2 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: good (used), functionality: fully functional, machine/vehicle number: 91654458, Year of construction: 2021, operating hours: 1,144 h, load capacity: 2,000 kg, lifting height: 170 mm, fuel type: electric, battery capacity: 375 Ah, battery voltage: 24 V, fork length: 1,150 mm, front tire type: polyurethane tires (non-marking), rear tire type: polyurethane tires (non-marking), empty load weight: 878 kg, Jungheinrich ESE 120 Pallet truck, year of manufacture 2021 Details: Jungheinrich ESE 120 Year of manufacture: 2021 Work hours (h): 1144 Lift height (mm): 170 Lift capacity (kg): 2000 Fork length (mm): 1150 Fedpfx Aey Rzgted Njpg Weight (kg): 878 Front wheels: Polyurethane Rear wheels: Polyurethane Battery YOM: 2021 Battery capacity (Ah): 375 Battery voltage (V): 24 Accessories: Power steering.

Condition: used, Year of construction: 2005, Horizon StitchLiner SL-5500 The Horizon StitchLiner 5500 is a powerful all-in-one solution for booklet production. It combines collating, creasing, folding, stitching, and three-knife trimming in a single, efficient process. With its user-friendly operation, high productivity, and versatility, this system offers numerous benefits for print shops, binders, and on-demand printing. This StitchLiner 5500 includes the following components: - 1x VAC-100a, 1x VAC-100m Collators - 1x ST-40 - 1x ACF-30 - 1x SPF-30 - 1x HTS-30 Key Features: - 20 stations - Inline production from collating to finished product - Variable data processing: Handles personalized prints and variable page counts, ideal for digital printing - Fully automatic format adjustment for quick job changes - Touchscreen for user-friendly operation, even for less experienced operators Fpodpjy Rzgmjfx Ad Nog Specifications: - Sheet sizes: Max. 500 x 350 mm, Min. 148 x 120 mm - Paper weight: 40-350 gsm - Processing thickness: 8-200 pages (max. 5 mm spine thickness) - Production speed: Up to 5,500 booklets/hour - Stitch distance: 60-150 mm Technical Details: - Trimming (untrimmed): Max. 350 x 250 mm, Min. 140 x 103 mm - Trimming (trimmed): Max. 312 x 230 mm, Min. 120 x 95 mm - Power supply: 400V / 50Hz - Space requirement: Min. 5,709 x 3,240 mm - Total weight: Approx. 2,500 kg All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price

Condition: excellent (used), Year of construction: 2017, operating hours: 13,240 h, turning length: 500 mm, turning diameter over cross slide: 290 mm, turning diameter: 500 mm, spindle motor power: 13,000 W, spindle speed (min.): 1 rpm, spindle speed (max.): 6,000 rpm, spindle bore: 73 mm, travel distance X-axis: 210 mm, travel distance Z-axis: 525 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, bar passage: 65 mm, overall weight: 4,300 kg, ## DMG MORI CTX alpha 500 – CNC Lathe Manufacturer: DMG MORI Model: CTX alpha 500 Year of manufacture: 2017 Control: Siemens 840D sl / ErgoLine ### Technical Specifications * Max. turning diameter: approx. 500 mm * Turning diameter over cross slide: approx. 290 mm * Turning length: approx. 500 mm * Chuck diameter: 210 mm * Bar capacity: approx. 65–73 mm * X-axis travel: approx. 190–210 mm * Z-axis travel: approx. 525 mm * Y-axis: optional / approx. ±40 mm * Tool turret: 12 positions * Spindle speed: max. 5,500 / 6,000 rpm Fedpjy Rzggefx Ad Nopg * Spindle power: approx. 13–20 kW * Voltage: 400 V * Frequency: 50–60 Hz * Connected load: approx. 30 kVA * Machine weight: approx. 4,300–4,650 kg ### Equipment * Siemens ErgoLine operating panel * Hydraulic chuck * C-axis * Chip conveyor * Coolant system * Precision slant-bed CNC lathe ### Condition * Machine can be inspected under power * Subject to prior sale * Sold without tooling * Ex works * Technical data subject to confirmation ### Service * Dismantling, loading, and transport available * Europe-wide handling possible 📍 Location: Germany 📩 Further information, pictures, and videos available on request

Condition: reconditioned (used), Year of construction: 2026, CARLO SALVI DL 560 RF Completely overhauled to as-new condition Closed cut/in die All new mechanical parts New CE-compliant electrical system with inverter, PLC and remote assistance Fully refurbished by H.B.R. srl Technical details: Number of dies: 1 Number of punches: 2 Wire diameter min/max: 2 - 5 mm Max shank length: 60 mm Max cut length: 75 mm Hole depth: DIN 7338B Max head diameter: 10 mm Max speed: 440 pcs/min Max cutting force: 1,500 daN Max forming force: 11,000 daN Fsdpfx Adey Rzgao Nspg Net weight: 6,000 kg Motor power: 9 kW Opportunity not to be missed!

Condition: excellent (used), CATALOG NUMBER 7556 Technical specifications: - Min / max working width: 20 / 240 mm Fodpfx Adjy Rzf Ns Nspg - Min / max working height: 8 / 160 mm - Number of spindles: 4 1) Bottom horizontal, 240 mm, 5.5 kW 2) Right vertical, 160 mm, 5.5 kW 3) Left vertical, 160 mm, 5.5 kW 4) Top horizontal, 240 mm, 7.5 kW - All heads adjustable vertically and horizontally - Spindle diameter: 40 mm – Top: - 6 powered infeed rollers, toothed (including 2 double rollers) - 2 powered outfeed rollers, smooth rubber – Bottom: - Lateral pressure before and after the roller on the lower table - Powered infeed toothed roller, swiveling, on the lower table before the first spindle - 2 pneumatic lateral pressure units - Powered outfeed roller, smooth metal - All rollers pneumatically loaded - Infeed table length: 2180 mm - Table adjustable vertically - Centralized lubrication - Electric thickness adjustment - Lifting motor: 0.75 kW - Stepless feed speed adjustment via inverter: 6–30 m/min - Feed motor: 3 kW - Feed through Cardan shafts - Enclosed in a cabin + - Extraction outlet diameter: 4 x 150 mm - Dimensions (L x W x H): 3750 x 1750 x 1800 mm - Weight: 3300 kg ADVANTAGES – Four-head configuration – Ideal for wet and dry wood – Used machine, excellent condition Net price: 75,900 PLN Net price: 18,070 EUR (based on 4.2 EUR exchange rate) (Prices may change with significant exchange rate fluctuations)