AVOS Equipment AG

Condition: excellent (used), functionality: fully functional, welding power (max.): 180 kVA, Schlatter Posiweld type Libra. Machine was built in 2005, control was upgraded by Schlatter in 2022. Dsdsxlvn Ejpfx Acwjcn

Condition: good (used), Year of construction: 2024, functionality: fully functional, 11 pieces lower holder Djdpfxexlin Ss Acwocn 7 pieces electrode 60 10 pieces lower electrode 45 Used

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 215, welding power (max.): 30 kVA, wire diameter: 16 mm, type of input current: three-phase, EVG wire straightening and cutting machine: PCN 2-16: working area: 6-16 mm, speed: -150 m/Min., drive power: 30 kW, grid connection: 3 x 380 V 50 Hz; In good working condition. The machine has been dissassembling by an EVG technician and was perfectly working. Equiped with 4 payoff stations and 2 motorised transport tables of 12 meters. Dodpsxg Ry Ssfx Acwocn

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, QRP26 Automatic Mesh Welding Portal inclusive of: • Tooling for 49 line wires • Top and bottom electrodes and current distribution • Pneumatic weld presses x 25 (Parallel/Direct Weld Triplex) • Transformers 250kvA x 13 • Weld controllers Dcsdexgg T Ujpfx Acwon • Electrical panel • Programming computer • 2500mm (100”) wide Including PLL 26 automatic linewire picking and loading system.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Wire mesh welding system (Schlatter MG316d) H6.1, Spool pay-off system, line wire LEU1.1, Line wire end supervision RZ2, Alignment device with center adjustment LHV5, Line wire pull-off device LHA5, Line wire compensating system loop RZT, Alignment device with center adjustment LVR6, Line wire roller advance unit MG26.26.3, Welding machine H17, Spool pay-off system, cross wire DV6, Prefeeding system Dcjdpfjxgg Rtjx Acwon DA4, Loop control device DES5.1, Cross wire pull-in and feeding device SD3, Cross wire shear QAE6, Cross wire feeding device SL4.3, Mesh shearing machine MST17.4, Mesh stacking device RGW-L, Roller conveyor SAB2.1, Automatic tying device RGW-L, Roller conveyor RGW-L, Roller conveyor SPH3/6000, Mesh package stacking device RGW-S, Roller conveyor MP PLS S7-1500, Control center E10-80, Wire butt welding unit

Condition: refurbished (used), SCHLATTER Welded wire mesh production line MG24 Full revamped WORKING RANGE Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Dedowu Tu Dopfx Acwjcn Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Adjustable by cutting device (0-1) Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24 WELDING MESH MACHINE MG 24.1/8C, Basic equipment including: - 1 Machine frame - 1 Upper support for press reception, continuously adjustable by hand crank - 1 Magnet supports with retaining magnets and weft wire monitoring. - 1 Row of pneumatic solenoid valves for press actuation. - 1 Installation for air and water. - 2 Pneumatic rotary drives with oil damping - Static motor torque with 5 bar compressed air: 480 Nm - Front continuously adjustable from: 25 - 250 mm adjustable by cutting device (0-1) - 1 Advance carriage with panel lifting device - 1 Set of tools for machine adjustment WELDING SECTION 8 Type C Transformers Rated power of each transformer: 100 kVA No-load secondary voltage: 7.1 V Rated secondary current: 14 kA 8 Thyristor contactors ES 130 12 Welding presses: 5.0 kN 12 Chain current bridge for spacing of warp wires: 50-100 mm 12 Chain current bridge for spacing of warp wires (for offset warp wires): 100 mm 10 Chain current bridge for spacing of warp wires: 100-150 mm 8 Chain current bridge for spacing of warp wires (for offset warp wires): 150 mm 6 Chain current bridge for spacing of warp wires: 150 - 200 mm 6 Chain current bridge for spacing of warp wires (for offset warp wires): 200 mm 24 Lower electrode holders Cu with standard angled electrodes and each with a water-cooled current cable, width: 58 mm 24 Wire clamping pliers Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24

Condition: refurbished (used), Year of construction: 2025, JAGER welded mesh line U-Gsa-st Full revamped "as new" Technical data 24 pay off for longitudinal wire spools, longitudinal wire straightening equipment Line wire pull off system Longitudinal wire loop Longitudinal wire straightening equipment Cross wire magazine Number of installer line wires : 24 up to 10 mm Diameter of lines wires : 4 to 10mm Diameter of cross wires : 4 to 10mm Separation between line wires : 100, 150, 200, and 300 mm Separation between cross wires : min 30 mm , steplessly programmable Max. length of cross wire (mesh width) 2500 mm , max welding width : 2400 mm Mesh length : min 3000 mm and max . 6000 mm Trafos : 8 x 160 Kva Number of installer line wires: Number of installer line wires : 24 up to 10 mm Diameter of lines wires: 4 to 10mm Diameter of cross wires: 4 to 10mm Separation between line wires: 100, 150, 200, and 300 mm Separation between cross wires: min 30 mm , steplessly programmable Dcjdpfewu Dcxsx Acwen Max. length of cross wire (mesh width): 2500 mm Max welding width: 2400 mm Mesh length: 3000 - 6000 mm Trafos: 8 x 160 Kva

Condition: excellent (used), Year of construction: 2007, COMPLETE mesh welding plant Plant consist of - 1. Mesh welding line SCHLATTER model MG-230 Min/Max wire diam - 3,5 - 14,00 mm Max width of mesh - 2.500mm Dcjdpfx Acjwr Tk Hewsn Line and Cross wire feeding - from precut wires / bars Construction year - 2007 2. COMBINED rolling/ribering/straightening/cutting line Line is COMBO - wire rolling/ribering/straightening/cutting Construction year - 2023. 3. Straight and cut machine WAFIOS model R-41-L Min/Max wire diam - 3,00 - 10,00 mm Max cutting length - 10.000 mm Construction year - 1990. Please contact us for more details. VIDEOS AVAILABLE upon request.

Condition: excellent (used), Year of construction: 1992, Manufacturer EVG Type TSD 7-25 Machine No. 958 Year of manufacture 1993 Working direction L > R Beam types KT 8… Beam height (mm) 90-250 Carrier length min. (mm) max. (mm) 14,000 Fixed lengths: Yes Cutting pitch (mm) 100/200 Spool unwinder (pcs.) 5 Dcjdewp Ilyepfx Acwjn LAR: Yes Wire diameter - 5-12 mm smooth/ribbed Diagonal - 4-7 mm smooth / ribbed Stack height max. (mm) - 500

Condition: used, Year of construction: 1970, functionality: fully functional, machine/vehicle number: D34E/8218, Offer Number: D34E/8218 Machinetype: mesh welder Make: SCHLATTER Type: PG8 Constr. year: 1970 Dedswi Thmepfx Acwocn wire diameter: 1,5-6,5 mm working width: 850 mm line wire distance: 20-60 mm distance of cross wire: 10-100 mm Location: Europe

Condition: excellent (used), Year of construction: 2020, High capacity, Fully Automatic Engineered Mesh Welding Plant SUPERWELD Dedpfxewig Exs Acwjcn Longitudinal wires diameter 6.0 mm – 13.0mm* Number of longitudinal wires 39 Cross wire diameter: 6.0 mm – 13.0 mm* *Rebar real diameter Φ must not exceed 13mm !! Mesh width: 3.800 mm Mesh length min 1.000 mm – max 10.000 mm Longitudinal wires pitch at 100mm Cross wire Step min 50mm Cross wire overhang 50mm – 150mm adjustable Power transformer welding 10 x 420 kVA Welding Speed of the machine at wire thickness 6x6mm, mesh spacing 100x100mm and 2150mm will reach 130 strokes.

Condition: used, Year of construction: 2002, functionality: fully functional, SCHLATTER model MG 316 Mesh welding line Technical Details - • Purpose: For the production of standard mesh • Manufacturer Schlatter • Condition: Not in operation • Longitudinal wire Ø min: 3 mm • Longitudinal wire Ø max: 8.5 mm • Crosswire Ø min: 3 mm • Crosswire Ø max: 8.5 mm • Cycles (transverse wires) max: approx. 120 • Max mat width: 2500 mm • Max nr. of longitudinal wires: 26 • Longitudinal wire feed: From coil • Crosswire feed: From coil • Longitudinal wire spacing: 100/150/200 mm • Crosswire spacing: 100-400 mm • Year installed: 2002 Dodpfx Acjv Unt Newjcn • Weight: ca. 30’000 Kg

Condition: refurbished (used), Year of construction: 2025, working width: 2,450 mm, usable width: 2,450 mm, Refurbished Schlatter MG903 - ZG24 - Longitudinal wire insertion LFE - Longitudinal wire feed LV - MG24.4 mesh welding machine - Cross wire feeder QF8 - Mat extraction MVL4.2 Dodpfxsv Ed Ans Acwecn - De-stacker MS12 Control and power cabinet - Siemens S7 TIA machine control Mesh size : 2450mm Wire: 2-12mm

Condition: good (used), Year of construction: 1991, Mesh welding line EVG model G95/102 Min / max wire diam - 4,00 - 12,00 mm Max width of mesh panels - 2.750 mm Dcedpfxovxq Eie Acwen FULLY AUTOMATIC - Lines wires and CROSS wires feeding from coils / spools. Please see attached document !

Condition: refurbished (used), functionality: fully functional, working width: 1,200 mm, Schlatter MG900, 1,200mm wide, with 4 x 100kVA transformers, updated control with Siemens S7-300 PLC from 2016. Mechanically completely rebuilt and all new control cables. Dcedpfx Acevvf T Aowon

Condition: excellent (used), Year of construction: 2020, Mesh welding line Brand - Schnell Italy Construction year - 2020. Min/Max wire diametr - 4,00 - 12,00 mm Max width of mesh panels - 2,500 mm Max length of mesh panels - 9,000 mm Line wires feeding - from precut wires Cross wire feeding - from precut wires Dedpfx Acevuhvqowscn Condition - EXCELLENT !!

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, working width: 1,240 mm, wire diameter: 12 mm, type of input current: AC, usable width: 1,240 mm, Machine Overview: Schlatter MG900 MG12 Mesh Welding Machine - "Offical Expose upon request" The Schlatter MG900 is a powerful and refurbished resistance welding machine, specifically designed for the production of wire mesh panels. With a width capacity of up to 1250 mm and a length of 3000 mm, it handles wire diameters of up to 12 mm. This machine has undergone extensive modernization to deliver maximum efficiency and flexibility in production. Djdpfx Aevtg Sbscwocn Main Components • LV - Longitudinal Wire Feeder o Upgraded with a high-precision servo axis o Hopper magazines for longitudinal wires up to 3000 mm • MG12.4 - Mesh Welding Unit o Equipped with 3 to 6 transformers. o Up to 12 Schlatter welding presses with a capacity of 5 kN •QFD34 - Cross Wire Feeder o Allows for double cross wire insertion for two different cross wire diameters / length, *Note: The second level is not yet installed in the photos • MVL - Mesh Extraction Unit o Controlled by a new MS2N Servo Motor from Bosch Rexroth CrtlX o Equipped with four Schlatter mesh grippers (expandable upon request) • MS - Mesh Stacker o Automatically stacks mesh panels with a travel path of up to 3100 mm • Control and Power Cabinet o Siemens S7 TIA Control System o Rexroth CrtlX Components for high-dynamic motion control Specs: • Mesh Width (Transverse Wire Length) max. 1250mm / min. 200mm • Mesh Length (Manual Loading) max. 3200mm / min. 300mm • Distance Between Outer Longitudinal Wires max.1200mm • Longitudinal Wire Spacing 20 - 150mm • Cross Wire Spacing min. 12.5mm • Longitudinal Wire Diameter 2.0 - 10.0mm • Transverse Wire Diameter 2.0 - 8.0mm • Maximum Number of Longitudinal Wires max.24

Condition: ready for operation (used), Year of construction: 1996, machine/vehicle number: 25560, Arbeitsbereich Trägerhöhe : min. 70mm - max. 250mm Trägerlänge : in Stufen von 100mm - max. 14000mm Dedovrb U Iopfx Acwscn Basisbreite : 60mm, 80mm Zick-Zack-Teilung : 200mm Stapelhöhe : max. 500mm Drahtdurchmesser Obergurt : min. 5mm - max. 12mm Untergurt : min. 4mm - max. 12mm Zick-Zack : min. 3,5mm - max. 6mm Arbeitsgeschwindigkeit : max. 75 Takte/min (30m/min)

Condition: excellent (used), Year of construction: 2009, PRATTO Mesh Welding line for 3D fence panels (and light mesh for construction use) Model Starweld POB-36-2100; production of mesh panels and 3D/bent mesh panels; mesh width: 2100mm; wire dia. longitudinal + cross wires: 3-6mm; line wire spacing min.: 50mm; cross wire spacing min.: 25mm; SPM: up to 140; 5 x 250 KVA transformers; max. number line wires: 42 with 50mm wire spacing; max. length of panels: 6000mm (20′); line consists of: payoff system; straightening-propulsion for longitudinal wires; loop LAR; powered straightening; cross wire payoff unit; cross wire loop; auto cross wire feed; welder; mesh trimming shear; mesh bending press; mesh ejection + stacking-turner; exit rolls Dcjdeudipfspfx Acwon

Condition: excellent (used), Complete production plant for production of 3D fence panels Plant consist of - Mesh line for 3D fence fully automatic ( Brand - PRATTO ) Powder coating line for 3D fence panels ( like new...only installed and tested) Djdpfx Acetywvuswjcn Please contact us for more details.

Condition: used, Year of construction: 2000, Schlatter mesh welding line Djdpfx Aotmw Nyecwjcn Please contact us for more details. Thank you!

Condition: used, Year of construction: 2014, 3D fence panels production line PRATTO High performance mesh welding line designed to produce high quality wire mesh 3D fence panels including Eurofence and "V" shaped fence. Equipped with bending unit that allows for precise shaping of wire mesh Mesh width: 2500 mm, Distance between two outer most line wires: 2500 mm Line wire diameter range: 4 to 6 mm Dcjdpetmw Nrjfx Acwjn Cross wire diameter range: 4 to 8 mm Number of line wires maximum: 42 Single cross wire hopper fed Cross wire spacings: 50 - 500 infinitely programmable Line wire spacing: 50 mm, programmable in 50 mm steps Line wires from coils of wire Total power Kw: 1250 Voltage: 400v-3-50

Condition: excellent (used), Technical Details : Year of manufacture: 1985 (fully electric in 2007, partial in 2010 underwent a mechanical overhaul.) The mesh max. width: 1500 mm Mesh density: 15 welding heads in arbitrary distribution Increment: 20mm – 200mm. Wire thickness: 1.2mm - up to 2.2mm (max 650 N/nmm - We have already welded 2.5mm Dodpfjryv S Ujx Acwscn also wired.) Energy demand: 14 kVA (max) Weight: approx. 8 tons Drive: digital servo, control (PLC). Stepless regulation.. Accessories: manual

Condition: excellent (used), Year of construction: 2004, Technical Details : Year of manufacture: 2004 The mesh max. width: 2200 mm Mesh density: 20 welding heads in arbitrary distribution (40 heads are also possible) Increment: 20mm - up to 200mm Wire thickness: 1.6mm-3.0mm (max 550Nnmm) Energy requirement: 8 kW Weight: approx. 10 tons Dcodporyv Siofx Acwjn Drive: digital servo, control (PLC).. Stepless regulation.. Accessories: manual

Condition: excellent (used), Year of construction: 2009, Technical Details : Year - 2009 Beam welding machine outlet height: 1400mm (UK beam from ground) Min. strap length: 0.8 m Max. beam length: 16.0 m Base width during production: 58 mm (inside diagonals) Finished beam width: 70 – 116 mm (external dimensions of bottom chords) Lattice girder production speed: max. 15 m/min Design of the wire feed speed: 18 m/min (upper and lower belt) Dcjdern N Efspfx Acwjn 38 m/min (diagonals) Carrier types that can be produced: KT KTS Top belt Ø: 5 – 16 mm 5 – 7 mm Lower belt Ø: 5 – 16 mm 5 – 7 mm Diagonal Ø: 4.5 – 9 mm 5 – 7 mm Height: 70-400mm 80-310mm Division of the diagonal: 190 – 210 mm 200 mm Primary material: Cold or hot rolled reinforcing steel from coil in accordance with EN 10080:2005 in weldable quality, max. carbon content 0.20 % The line is in excellent working condition !