THENI CNC tech

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 16065, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, controller model: HEIDENHAIN iTNC 530, spindle speed (max.): 16,000 rpm, The seller can handle the disassembly and loading for €1,250! TECHNICAL DETAILS Travel range X-axis: 1,200 mm Travel range Y-axis: 900 mm Travel range Z-axis: 500 mm Spindle speed: 16,000 rpm Hfedpfxszdttpj Ac Neh Tool holder: SK 40 Milling spindle diameter at the front bearing: 70 mm Table clamping surface: 1,400 x 900 mm MACHINE DETAILS Control system: HEIDENHAIN iTNC 530 EQUIPMENT Tool changer

Condition: used, Year of construction: 2009, Doosan Mynx 750/50 4 Axis Vertical Machining Centre with Fanuc Series 21i-MB CNC Control, Kitagawa MR320RAE04 4th Axis Unit 310mm 3 Jaw Chuck, Table Size 1600mm x 750mm, 40 Tool ATC, BT50 Spindle Taper, Filtermist FX7002 Oil Mist Extractor, Kaukan Chiller Unit, Profluid MCF 20 Coolant Pressure Filter Unit, Machine Weight 13500kg. S/No. MYNX 7500373 (2009) Includes Work Bench, Vice and Various BT50 Spindle Tool Holders. Country of Origin: Korea Location: This lot is located in Birmingham, UK. A charge of £550 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchase Hjdpfozdtlrox Ac Njfh

Condition: excellent (used), Year of construction: 2010, Depo ZPS Model MCFV 1260 S Year of manufacture 2010 Chip conveyor Control system: -Heidenhain iTNC 530 -Electronic handwheel Main spindle: -Max. speed 8000 rpm -Tool holder SK50 Table: Hedozdrahopfx Ac Njfh -Clamping area 1450 x 590 mm -Max. table load 1350 kg Tool changer: -24 magazine positions Travel ranges: -X - 1270, Y - 610, Z - 760 mm Accessories: -Infrared 3D measuring probe Delivery time: -Immediate

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 760 mm, travel distance Y-axis: 640 mm, travel distance Z-axis: 760 mm, controller manufacturer: FANUC, controller model: Series 18i-MB, workpiece height (max.): 800 mm, workpiece weight (max.): 500 kg, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 120, tool length: 400 mm, tool weight: 15 g, Equipment: chip conveyor, documentation/manual, horizontal machining center with pallet changer, two pallets 500x500, 120 tool stations. Hfodpfxozdqvzo Ac Neh

Condition: good (used), Year of construction: 2010, functionality: fully functional, Matec 30 L, year of manufacture 2010, Heidenhain iTNC 530 control, travel X/Y/Z 1300/600/700 mm, spindle speed up to 12,000 rpm, HSK 63 - A tool holder, electronic handwheel, ICS 20 bar, paper band filter, 80-position tool magazine, full enclosure of work area, direct measuring systems, chip conveyor, bellows with steel lamellae, 3D measuring probe, laser measuring device. Hodezdqk Eopfx Ac Nofh

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 135001, travel distance X-axis: 1,350 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 810 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, nominal power (apparent): 35 kVA, controller manufacturer: HEIDENHAIN, controller model: ITNS 530, total height: 2,900 mm, total length: 7,000 mm, total width: 2,700 mm, table width: 620 mm, table length: 1,550 mm, overall weight: 10,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 6,510 h, distance table to spindle center: 900 mm, number of slots in tool magazine: 40, tool length: 300 mm, tool diameter: 80 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 63 A, Equipment: chip conveyor, documentation/manual, KUNZMANN BA 1350 CNC Vertical Machining Center - Spindle bearing diameter, front: 70 mm, rear: 60 mm - Distance between spindle and table: min. 90 mm / max. 900 mm - Distance between spindle center and machine frame: 655 mm - Max. tool diameter with occupied positions: 80 mm, with free adjacent position: 125 mm - Table with 6 grooves - Includes dividing head (4th and 5th axis - manufacturer WALTER, type: TANIH 200) - With LANG 5-axis clamping system - Also includes RENISHAW measuring probe, a chip conveyor, and various documents Hfjdpfxozdp Ehe Ac Noh - Note: without the machine vise located on the clamping surface! Note: The item must be collected between July 27th and July 30th, 2026, on a date to be agreed upon. FCA D-71364 Winnenden - loaded onto a truck.

Condition: ready for operation (used), Year of construction: 1999, Available immediately ex location: CNC Vertical Machining Center EMCO Type VMC 600 Year of manufacture: 1999 Heidenhain TNC 426 D Electronic handwheel Travel X/Y/Z: 1200/410/370 mm SK 40 24-position tool magazine Hfodjzdnwvepfx Ac Nsh Speeds up to 6,000 rpm 3 vices Weight: 4 t Price: EUR 6,500.-- plus VAT, ex location SK 40

Condition: excellent (used), Year of construction: 2016, operating hours: 3,500 h, Quaser MF 500 C Quaser MF 500 C machining center with Siemens 828 D control, manufactured in 2016, in very good original condition. The machine comes from the training workshop of a renowned German mechanical engineering company. CE compliant!! Technical data: Year of manufacture: 2016 Working area and travels: X-axis (longitudinal): 550 mm Y-axis (transverse): 800 mm Z-axis (vertical): 610 mm A-axis (swiveling range): +30° to -120° C-axis (rotational axis): 360° (continuous) Table diameter / clamping surface: Ø 410 mm Maximum workpiece size: Ø 500 mm × H 300 mm Maximum table load: 200 kg Spindle taper: BT 40 Speed: 12,000 rpm Drive power: 15 kW Tool positions: 30 Number of simultaneous axes: 5 Rapid traverse: 36 m/min Weight: 7750 kg About the machine: Hodozdityepfx Ac Nefh Offered is a Quaser MF 500 C machining center with a Siemens 828 D control. This machining center is in very good original condition. It comes from a company where it was only used to a limited extent for prototype manufacturing. Key features: The Quaser MF 500 C is a powerful, vertical 5-axis simultaneous machining center from the Taiwanese manufacturer Quaser. It is designed for the highly precise complete machining of complex workpieces in the aerospace, mold making, and general precision engineering industries. Stable construction: The machine is built to be massive and heavy, ensuring maximum stiffness and vibration damping, even during heavy machining. Tilting table: The swiveling round table enables full 5-axis machining. With support devices (counter bearings), workpieces weighing up to 500 kg can often be clamped. The Quaser MF 500 C has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Quaser MF 500 C on site while it is powered up. You can find more milling machines from well-known manufacturers on our website.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 216327, travel distance X-axis: 1,660 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: Mazatrol 640M, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Number of axes: 3 Travel in X-axis: 1,660 mm Travel in Y-axis: 510 mm Travel in Z-axis: 510 mm Table length: 2,000 mm Table width: 510 mm Tool holder: ISO40 Max. spindle speed: 12,000 rpm MACHINE DETAILS Control system: Mazatrol 640M Dimensions & Weight Dimensions (L x W x H): 5,120 x 3,000 x 2,800 mm Hjdpfx Aozdf Dhec Njfh Net weight: 8,250 kg EQUIPMENT Chip conveyor Tool magazine with 30 positions Tools included

Condition: used, Year of construction: 2015, operating hours: 8,500 h, functionality: fully functional, machine/vehicle number: 119K151334, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: Siemens, controller model: Siemens 828D, total height: 2,860 mm, total length: 2,800 mm, total width: 2,760 mm, table width: 700 mm, table length: 1,200 mm, rotational speed (max.): 12,000 rpm, number of slots in tool magazine: 30, tool holder type of tool turret 3: SK 40, Equipment: chip conveyor, rotational speed infinitely variable, Quaser 184/12B machining center. Year of manufacture: 2015. X1020 mm, Y610 mm, Z610 mm. 12,000 rpm. Control unit: Siemens 828D. Fourth-axis and robot preparation. In very good condition. Hsdozdcyyopfx Ac Njfh

Condition: ready for operation (used), Year of construction: 2021, operating hours: 6,000 h, travel distance X-axis: 1,530 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 465 mm, overall weight: 10,500 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 54, number of axes: 5, This 5-axis SPINNER U5-1530 was manufactured in 2021. It features an impressive X-axis travel of 1530 mm, Y-axis travel of 530 mm, and Z-axis travel of 465 mm. The machine includes a fixed rigid table combined with a 2-axis rotary/tilt table, enhancing its versatility. If you are looking to get high-quality machining capabilities, consider the SPINNER U5-1530 vertical machining centre we have for sale. Contact us for further details. - Table Configuration: Fixed rigid table section combined with a 2-axis rotary/tilt table (Ø 650 mm)- Voltage: 3/PE~ 400V- Frequency: 50 / 60 Hz- Operating Current (Ib): 42 A- Nominal Current (In): 50 A- Coolant Through Spindle (IKZ): Yes (equipped with a high-pressure CTS unit)- Measuring System: 3D touch probe for workpiece measurement and zero-point setup- Swivel / Rotary Axis: Integrated- Chip Management: Chip conveyor system- Cooling System: Integrated coolant plant Technical Specification Through-spindle Coolant Yes Hjdezc R D Dspfx Ac Njfh

Condition: new, Year of construction: 2026, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 12 m/min, controller manufacturer: Fanuc oimF plus, overall weight: 150,000 kg, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 24, Equipment: chip conveyor, BT 50, 6000 rpm Manual gearbox with multiple ranges Hfjdpfxezc Rkqe Ac Njh Machine operating on flat guides

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, controller model: NGC, total height: 2,870 mm, total width: 2,489 mm, table load: 794 kg, overall weight: 5,443 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, tool weight: 5,400 g, product length (max.): 3,734 mm, number of axes: 3, This 3-axis HAAS VF-4SS was manufactured in 2017. It features impressive travels of 1,270 mm in the X-axis, 508 mm in the Y-axis, and 635 mm in the Z-axis. The machine includes a robust table size of 1,321 x 457 mm and a maximum table load of 794 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-4SS vertical machining centre we have for sale. Contact us for further details. • Table size: 1,321 x 457 mm • Spindle drive: Inline direct-drive • Tool changer: 30+1 side-mount • Max tool diameter (full / adjacent empty): 64 / 127 mm • Max tool length: 279 mm Hsdpfx Acjzc I I Ho Nefh • Rapid traverses (X/Y/Z): 35.6 / 35.6 / 35.6 m/min • Cutting feedrate: 21.2 m/min • Coolant system: Flood coolant • Through-spindle coolant (TSC): Yes • Coolant tank capacity: 208 l

Condition: used, Year of construction: 2016, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 880 mm, 5-Axis Machining Center This machine was used as a showroom machine from 2016 to 2022. From 2022, the machine was used for production at HAL Plauen for the processing of axle carriers. Before being used for production, the machine was completely overhauled/refurbished. In December 2024, a new milling spindle was purchased (the spindle has approximately 500 operating hours). Machine operating hours: 24,000 Working area: -> X-axis 1500 mm -> Y-axis 1250 mm -> Z-axis 880 mm Feed rate / Rapid traverse: -> X-axis 100 m/min -> Y-, Z-axis 100 m/min Axis acceleration: -> X-, Y-axis 7 m/s² -> Z-axis 10 m/s² -> Jerk 150 m/s³ Table load capacity: -> Max. weight 400 kg Spindle: -> Tool holder HSK 100 -> Speed range 10,000 rpm -> Power (S6/40% duty) 40 kW -> Max. torque 175 Nm Tool magazine: -> Positions 36 -> Max. tool length 520 mm -> Max. tool diameter (with free adjacent slot) 205 mm -> Max. tool weight 20 kg -> Total load 200 kg -> Tool change time 3 s with chip conveyor and chiller/cooling unit • Manufacturer: Lahntechnik GmbH Hfodpfx Acozc Ekrs Njh • Model: KESY 280-01 • Serial number: 2017-05981 • Year of manufacture: 2017 • Power rating: 13.6 kW • Nominal voltage: 400 V / 3~ / PE / 50 Hz • Control voltage: 24 V DC • Protection class: IP 54 • Refrigerant: R410A – 10.03 t CO₂ equivalent • Max. operating pressure: 30 bar (HD) / 19 bar (ND) • Empty weight: 400 kg • Country of origin: Germany The machine/asset does not include any product-related tools/fixtures or grippers (robots). The machine was taken out of production in October 2025 due to the factory closure. It is still powered on and can be inspected in that state. However, it cannot be put into operation for a trial run because no machine operator is available. Please review the videos available, which were taken of the machine in December 2025. Transport locks are not required. For loading and unloading, special Wenzler lifting/transport equipment is required. This equipment must be rented directly from Wenzler/Heller Group by the buyer. After lifting and unloading, the buyer must return the equipment to Wenzler.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 680 mm, travel distance Z-axis: 670 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, controller manufacturer: FAGOR, controller model: 8055i, total height: 2,700 mm, total length: 5,440 mm, total width: 2,400 mm, table width: 660 mm, table length: 1,500 mm, table load: 1,000 kg, overall weight: 5,500 kg, spindle speed (min.): 8,000 rpm, Equipment: chip conveyor, documentation/manual, Microcut VM 1500 Machining Center - Table dimensions: 1,500 x 660 mm. - Travel: 1,500 x 680 x 670 mm - Spindle: BT-40 / 8,000 Rpm Hjdjzczkujpfx Ac Nsfh - Tool changer: 24 positions. - Chip extractor. - Internal coolant system. - Control: Fagor 8055i. - Year: 2007.

Condition: good (used), Year of construction: 2016, Traverses XYZ: 1524 x 700 x 610mm, table size 1700 x 700mm, Table load 2,000kgs, Heidenhain TNC 620 Control, Hodpfx Aozcy Irec Njfh Din 40 spindle taper, 48 station tool changer, Spindle speed 15,000rpm, through spindle Coolant, low volt light, swarf conveyor,

Condition: excellent (used), Year of construction: 2007, X-axis: 1,600 mm Y-axis: 800 mm Z-axis: 740 mm Max. workpiece size: 1,600 x 700 mm Max. table load: 1,200 kg Spindle speed: 12,000 rpm Tool holder: SK40 Tool changer: 24 positions Control system: HAAS Version M15 Hfjdpfjzcpplox Ac Neh Includes 4th and 5th axes, ORIGINAL HAAS Includes chip conveyor Includes documentation

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 1,500 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 650 mm, controller manufacturer: HEIDENHAIN, controller model: TNC640 (19" Touch-Screen display), table width: 650 mm, table length: 1,600 mm, table load: 1,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 17,000 W, number of slots in tool magazine: 30, tool weight: 7,000 g, number of axes: 3, This 3-axis HARTFORD LG 1570 TNC 640 was manufactured in 2023. It features an impressive X-axis travel of 1,500 mm, Y-axis travel of 700 mm, and Z-axis travel of 650 mm. The machine includes a robust clamping table with dimensions of 1,600 x 650 mm and a maximum table load capacity of 1,000 kg. If you are looking to get high-quality machining capabilities, consider the HARTFORD LG 1570 TNC 640 vertical machining centre. Contact us for further details. - T-Slots configuration: 5 slots, 125 mm distance, 18 mm size- Guideway System: Upgraded Linear Roller Guideways on X, Y, and Z axes (instead of standard ball guides)- Feed Drives: Digital servo motors with ball screws on all axes- Main Spindle Taper: SK40- Main Spindle Drive: Pulley/Belt driven AC motor- Max. Spindle Torque (M max): 89 Nm- Spindle Temperature Control: Closed cooling circuit with separate spindle cooling unit- Tool Changer Type: Automatic Tool Changer (ATC) with rapid-change double arm- Tool Magazine Capacity: 30 positions (ATC30)- Max. Tool Diameter: Ø75 mm (Ø150 mm if adjacent positions are empty)- Max. Tool Length: 300 mm- Workpiece Probe: 3D Touch Probe (installed for automatic zero-point and position measurement)- Tool Probe: Tool Touch Probe System (installed on table for length, diameter, and tool breakage detection)- Internal Coolant Supply (IKZ): High-pressure pump system, max. 20 bar with cartridge filter- External Coolant Supply (AKZ): Multi-nozzle system on spindle nose- Air Supply: Spindle nose compressed air cooling nozzle & central air through the spindle (programmable via M-functions)- Chip Management: Enclosed workspace with sloped bed, chip flushing system, and longitudinal hinged belt chip conveyor (discharge height approx. 1,200 mm, discharge side: Left)- Enclosure features: Front electronically monitored sliding door, side swing doors with windows for long workpieces- Lubrication: Fully automatic central lubrication system with level control and CNC warnings- Workspace Lighting: 2x LED lights- Additional Equipment: Control cabinet air conditioning unit, electronic handheld handwheel, compressed air gun with coiled hose, hand-operated coolant flushing gun- Color Scheme: Black (base frame, column, vertical slide, coolant tank, cabinet, doors, conveyor) & White (enclosure housing) Hfedpfx Acozccgqo Noh

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 1,250 mm, controller manufacturer: HEIDENHAIN, controller model: TNC620, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis WEMAS VZ 1250 Quick was manufactured in 2013. It features a Heidenhain TNC 620 control system, ensuring precision and reliability in operations. If you are looking to get high-quality machining capabilities, consider the WEMAS VZ 1250 Quick vertical machining centre we have for sale. Contact us for further details. Hfodpfxozbu N Ie Ac Noh • Condition: Very good / Fully operational • Control System: Heidenhain TNC 620

Condition: excellent (used), Year of construction: 2020, Table size 1630 x 760 mm, table load 1500 kgs, Traverses XYZ 1525 x 762 x 625 mm, rapid feedrates 30m/min, Hfedpfx Acszbkm Nj Neh Spindle power 24Kw, spindle speed 12,000rpm, 30 station ATC, spindle taper BT40, through spindle coolant, swarf conveyor, spindle probe , heidenhain tnc 640control.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 1087278, SPECIFICATION Table size 1321mm x 457mm X axis traverse 1270mm Y axis traverse 508mm Z axis traverse 635mm Spindle BT40 Spindle speeds 0-12000rpm Spindle motor 22.4kW Rapid feed rate 35.6m/min Toolchanger capacity 40 + 1 tools Approx. weight 6033kgs Hjdpfx Aszbhn Rjc Nofh MACHINE EQUIPPED WITH: - HRT 210 4th axis Through spindle coolant Swarf auger Lighting Guarding Manual

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, travel distance X-axis: 1,626 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, workpiece length (max.): 406 mm, workpiece weight (max.): 1,814 kg, total height: 3,277 mm, total length: 2,921 mm, total width: 4,521 mm, table width: 711 mm, table length: 1,626 mm, rotational speed (max.): 15,000 rpm, overall weight: 10,887 kg, spindle speed (max.): 15,000 rpm, coolant supply: 70 bar, spindle nose: HSK-A63, number of slots in tool magazine: 51, input voltage: 380 V, type of input current: three-phase, Equipment: chip conveyor, rotational speed infinitely variable, We are offering this excellent Haas VM-6 vertical machining center, manufactured in 2023. Model: VM-6 Serial number: 1280338 Date of manufacture: 04/2023 Voltage: 380 V Phase: 3 Frequency: 50/60 Hz Rated current: 35 A Maximum current: 35 A The machine is in good condition. It has only been used to machine aluminum. All HSK tool holders are included. No work table is included. Additional options: 15K spindle with HSK-A63 interface 50+1 tools Through-spindle coolant, 70 bar Wireless, intuitive measuring probe system by Renishaw. For both the tool and the workpiece. Quadruple lead screw system with conveyor belt for chip removal Coolant maintenance kit Hfsdpfeza A I Aex Ac Noh External coolant filter Chip drawer filter set If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, number of axes: 4, This 4-axis HAAS VF-4SS was manufactured in 2019. It features an X-axis travel of 1270 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine is equipped with a spindle speed of 12,000 rpm and includes a chip conveyor, coolant filtration system, and a 4th axis drive. If you are looking to get high-quality machining capabilities, consider the HAAS VF-4SS vertical machining centre we have for sale. Contact us for further details. • Spindle nose to table (max): 742 mm • Distance spindle nose to table (min): 107 mm • Through-spindle coolant: Yes • Programmable coolant nozzle: Yes • Rigid tapping: Yes Hfsdpfxoza A Enj Ac Njh • Visual part programming system: Yes • Ethernet interface: Yes • Remote monitoring: HaasConnect + HaasDrop • Electronic handwheel with touchscreen: Included • Coolant filtration system: Included • 4th axis drive and wiring: Included • Air blast through spindle: Included • Coordinate rotation and scaling: Included • Tool presetting arm: Included • Working light: Included • Standard memory: 1 GB • Machine orientation: Vertical • Installation and basic training: Included • Warranty: 12 months Additional equipment • Chip conveyor: Auger type • HRT210 Rotary Table (CNC rotary table) • Servo drive: Sigma 5 • Manual tailstock: 6" • Compatibility noted: VF-4SS

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, FOR SALE: CNC Machining Center – LAGUN L-1100 (2022) Hedpfx Aeza Aa Ssc Nefh Recent, high-performance machine in excellent condition, as shown in the photo IMG_6170.jpeg. Manufacturer: LAGUN (Maher Holding - Spain) Model: L-1100 Year: 2022 Numerical control: FAGOR (Large screen + full keyboard) ⚙️ Capabilities & Equipment Travel (X / Y / Z): 1100 / 600 / 550 mm Included equipment: Automatic chip conveyor (visible in IMG_6170.jpeg), remote handwheel, full CE guarding. Price and operating hours history available upon request. BT MACHINES BUYING AND SELLING ALL TYPES OF INDUSTRIAL EQUIPMENT ALL TYPES OF MACHINE TOOLS

Condition: used, Year of construction: 2004, travel distance X-axis: 1,600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: Fanuc, overall weight: 9,000 kg, table length: 825 mm, table width: 625 mm, controller model: 21i MB, Travelling Bridge CNC Vertical Machining Centre Table size (2) 825 x 625 mm. Number of pallets: 2 Movement x-Axis 1600 mm. Movement y-Axis 600 mm. Movement z-Axis 500 mm. 4th Axis (Rotary table) NC Max table load 1200 kg Number of tools in magazine 51 pieces. Maximum spindle speed 12.000 R/pm. Tool taper DIN 69871A CNC control Fanuc 21i MB If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Hfedszavluopfx Ac Neh Feel free to view our other advertisements for a complete overview of our stock.