Atf

Condition: used, Year of construction: 2024, Manufacturer: KrohneModel: OPTIMASS 6400C S25Year: 2024Type: Mass flow meter100–230 VACNominal diameter: Ø DN 25Flange diameter: Ø 115   Bledpfxsziqfgj Ambsi

Condition: used, Rohde & Schwarz EMI Test Receiver Model: ESPI3 Frequency range: 9 kHz to 3 GHz IF Resolution Bandwidths (RBW): 200 Hz (CISPR), 9 kHz (CISPR), 120 kHz (CISPR), 1 MHz, as well as 10 Hz to 10 MHz in 1-3-10 steps CISPR Bandwidths: < 150 kHz = 200 Hz, 150 kHz–30 MHz = 9 kHz, > 30 MHz = 120 kHz Detectors: Max Peak, Min Peak, Quasi-Peak (CISPR 16), Average, RMS Up to 3 detectors can be activated simultaneously Input Attenuation: 0 dB to 70 dB in 10 dB steps Optional Pre-amplifier ESPI-B2: 9 kHz to 3 GHz, 20 dB gain Blsdszimlvopfx Ambji Noise Figure: approx. 18 dB without pre-amplifier, approx. 10 dB with pre-amplifier User-adjustable start and stop frequency Step size can match reception frequency (harmonic measurement) Display units: dBm, dBµV, dBµA, dBpW, dBpT Measurement functions: EMI as per CISPR, APD, CCDF, continuous and single measurement Weight: 1 kg Condition: Used Scope of delivery: (See picture) (Subject to modifications and errors in technical data. All information is without guarantee!) Please feel free to contact us by phone for further questions.

Condition: excellent (used), Keyence Model: VR-5200 Type: Measuring head Light Sources Light source for observation: LED ring light (red, blue, green) Light source for measurement: White LED Controller: VR-5000 Observation and Measurement Range Macro mode Magnification (based on a 15-inch monitor): 12×: Horizontal: 24.0 mm Vertical: 18.0 mm Magnification (based on a 15-inch monitor): 25×: Horizontal: 12.0 mm Vertical: 9.0 mm Magnification (based on a 15-inch monitor): 38×: Horizontal: 8.0 mm Vertical: 6.0 mm Magnification (based on a 15-inch monitor): 50×: Horizontal: 6.0 mm Vertical: 4.5 mm Micro mode Magnification (based on a 15-inch monitor): 40×: Horizontal: 7.6 mm Vertical: 5.7 mm Magnification (based on a 15-inch monitor): 80×: Horizontal: 3.8 mm Vertical: 2.9 mm Magnification (based on a 15-inch monitor): 120×: Horizontal: 2.5 mm Vertical: 1.9 mm Magnification (based on a 15-inch monitor): 160×: Horizontal: 1.9 mm Vertical: 1.4 mm Zoom: 1× to 4× Height Measurement Measurement resolution: 0.1 µm Height measurement range Without image stitching in Z Macro mode: 10 mm Micro mode: 1 mm With image stitching in Z Macro mode: 50 mm Micro mode: 30 mm Repeatability (σ) Without image stitching in Z 0.4 µm With image stitching in Z 1.0 µm Measurement accuracy Without image stitching in Z ±2.5 µm With image stitching in Z ±4.0 µm Width Measurement Repeatability (σ) Macro mode: 1 µm Micro mode: 0.5 µm Measurement accuracy Macro mode: ±5 µm Micro mode: ±2 µm Image Stitching Fully automatic measurement (automatic XY control + automatic Z focus), Automatic assignment, automatic area setting Measurable XY area 206 x 104 mm Object table XY travel: 184 × 88 mm (motorized) Z travel: 73 mm (motorized) Load capacity: 4.5 kg Bljdpfxozimlpo Ambei Working distance: 75 mm Image acquisition element 4-megapixel CMOS, S/W Transmitter lens Double telecentric lens x 2 Receiver lens Double telecentric lens Data processing Dedicated PC according to KEYENCE specifications (Operating system: Windows 11 Pro) Power connection Voltage: 100 to 240 V AC, 50/60 Hz Power consumption: Max. 200 VA Environmental resistance Ambient temperature: 15 to 30 °C Relative humidity: 20 to 80% RH (no condensation) Weight: approx. 28 kg (weight of the measuring unit only: approx. 11 kg) Distance extension object table Observation software VR-5000 Version 3.3.5.75 Image stitching module VR-H3J Creates a single large image from a series of images taken with the observation software. You will see color images. Analysis extension module VR-H3CA Expands the functionality of the analysis software. Can perform measurement comparison and 3D CAD measurement comparison. Condition: used Scope of delivery: (as shown in the pictures) (Changes and errors in the technical data, information provided are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Shimadzu Type: AG-X plus 20kN-50kN +750mm Dimensions: W 1206 x D 765 x H 2920 mm Technical specifications: Bsdpfjzimkfox Ambjli Fmax: 50 kN Speed: 0.00005~1500 mm/min Accuracy: ±0.1 % JIS B7742 Class 0.5, ASTM E2658 Class A Crosshead-table distance (mm)(tensile stroke)*3: 215 to 1940 (20 kN: 0 to 1535 mm, 50 kN: 0 to 1475 mm) Possible test width: 600 mm Frame stiffness: 180 kN/mm 710 kg 200 V 4.5kVA/15 A + Accessories as shown Condition: used Scope of delivery: (see picture) (Specifications and data subject to change and errors!) If you have further questions, we will be happy to answer them by phone.

Condition: used, Huda Technology HUD-G809 Drop Shock Test System The system is also suitable for testing batteries. Max load: 100 kg Table size: 500 mm x 600 mm Peak impact acceleration range (half-sine wave): 150 - 6000 m/s² Pulse duration (half-sine wave): 0.5 - 30 ms If the pulse duration is less than or equal to 3 ms, the tolerance for peak acceleration is ±20%; the tolerance for pulse duration is ±15%. If the pulse duration is greater than 3 ms, the tolerance for the waveform should comply with the range specified in the standard. Velocity tolerance: ±15% Hydraulic brake prevents secondary impact. Overall table dimensions: 1000 x 750 x 2450 mm Weight: 3600 kg Power consumption: 5.5 KVA 380V ±10% AC 50 Hz Condition: used Bjdpfxszikb Is Ambeli (We reserve the right to make changes and correct typing errors in technical data and specifications!) If you have any other questions, we would be happy to answer them by phone.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, warranty duration: 3 months, Equipment: documentation/manual, LEICA BLK3D – Professional 3D Photogrammetric Distance Meter Selling a Leica BLK3D in perfect working condition – the leading photogrammetric measurement tool for professionals in the construction, surveying, and architecture industries. Description The BLK3D combines a calibrated stereo camera, measurement sensors, software, and integrated edge detection functions, enabling image-based measurements with professional accuracy. (VERTICAL 3D) The device is equipped with 2 stereo photo lenses, allowing you to measure all elements appearing in the photo in 3D. (STTL) Each photo taken constitutes a complete set of measurements, including height, width, and depth. (Kuker-Ranken) Processing is done in real-time directly within the device (edge computing), without the need for a network connection or cloud services. (Tavco) Key Features Integrated photogrammetry: instrument combining a camera, advanced algorithms, and instant processing. Coupled with electronic distance measurement technology. Auto-targeting: visual recognition technology that allows you to select specific points for your measurements. Site documentation: measure inaccessible areas, create plans, estimate building installations, and document the progress of construction sites. Collaboration: share measurements with your colleagues via the BLK3D software (mobile or desktop version), export in JPG, or create PDF reports. Automatic geolocalization: each image is time-stamped and associated with the exact GPS coordinates of the capture location. (Kuker-Ranken) BIM/CAD integration: export in DWG/DXF for use in your CAD software, compatible with Autodesk BIM 360. (Kuker-Ranken) Technical Specifications Dimensions 180.6 × 77.6 × 27.1 mm Weight 480 g Tripod thread 1/4" (standard photo) Cameras 2 × 10 MP, 80° angle, 4 mm focal length Screen 5" IPS touchscreen, 720×1280 px Processor Snapdragon 820E Quadcore 2.35 GHz RAM 4 GB Internal storage 64 GB (~5,000 stereo photos) OS Android 7.1.2 Accuracy (good conditions) ±1 mm Accuracy (poor conditions) ±2 mm Maximum range 250 m (good conditions) / 120 m (poor) Battery 3,880 mAh – battery life ~4h Connectivity Bluetooth 4.1, Wi-Fi 802.11 b/g/n, GPS+GLONASS Ideal for: Architects, surveyors, quantity surveyors, site managers, building inspectors, engineering firms – any professional who needs to take measurements quickly on-site or during inspections. Sale includes: 1 BLK3D 1 Cable + charger 1 Battery Blodpfx Ajzif Naembei 1 Microfiber cloth International shipping possible at your expense. - Interested in this equipment? Contact me via PM for more details or to discuss your 3D digitization needs!

Condition: used, Year of construction: 2016, functionality: fully functional, warranty duration: 3 months, This complete used package includes: 1 Faro X330 scanner. 2 Batteries. 1 Charger. 1 Tripod. 1 Transport case. 1 SD card. USB scene software. In good condition! 💥 €9,700 (excluding VAT) 💥 VAT recoverable. Delivery throughout Europe. TOPOGRAPHIE CONSEILS Alternative solutions for measurement and software. Bodpfx Amszif Iiebjli #faro #robotictotalsation #theodolite

Condition: used, Included: KEYENCE LJ-V7300 laser head - 3 units KEYENCE LJ-V7001P laser profiler - 2 units CA-CH5 cable (CA-CH5 – VISION SYSTEM CAMERA CABLE High-Speed Type, 5m – 85444290 – 0DH70207, 0DH70209, 0DH70211) for connecting to the LJ-V7000 series controller - 3 units. Individual units can be purchased. More information at tobesold.eu Professional KEYENCE LJ-V7300 laser profilers - 3 units, designed for non-contact 2D and 3D measurements with high accuracy. The device uses laser scanning technology for fast dimensional, profile, height, and geometry inspection of parts in industrial and laboratory applications. The LJ-V7300 model is used in automated quality control, measurement of production components, surface inspection, and advanced machine vision systems. Thanks to its high measurement speed and high resolution, it enables real-time measurements on production lines. LJ-V7300 – 2D/3D Laser Displacement Profiler 300+/- 145 mm – 90314990 – 88710030, 88710048, 88710056 Specifications Manufacturer: KEYENCE Model: LJ-V7300 Type: 2D/3D laser profiler Measurement range: 300 ± 145 mm Measurement technology: non-contact laser measurement Application: height, profile, shape, and geometry measurements KEYENCE LJ-V7001P is a professional controller designed to work with LJ-V series laser profilers, used in advanced 2D and 3D measurement systems. The device is responsible for processing measurement data, analyzing profiles, and integrating the system with industrial automation and quality control stations. The controller was designed for fast analysis of data from laser sensors, enabling precise measurements of height, geometry, shape, and surface inspection in real time. Thanks to its industrial design, it is suitable for use in demanding production environments and research and development laboratories. Specifications Manufacturer: KEYENCE Model: LJ-V7001P Type: controller for 2D/3D laser profilers Version: PNP Series: LJ-V Part numbers: 90314990, 88710101, 88710116 Application: used with KEYENCE LJ-V laser sensors and profilers Applications industrial metrology, quality control, 2D and 3D measurements, industrial automation, machine vision systems, Bledpfx Amsziddcsbei surface and geometry inspection, research and development laboratories. Key features fast, non-contact laser measurement, ability to create 2D profiles and 3D models, high measurement accuracy and repeatability, integration with automation and quality control systems, suitable for continuous operation in an industrial environment. The devices come from equipment used in research and development activities related to measurement systems, metrology, and industrial automation. Technical and visual condition as shown in the product photos.

Condition: refurbished (used), functionality: fully functional, warranty duration: 12 months, input voltage: 230 V, measuring range X-axis: 250 mm, measuring range Z-axis: 320 mm, overall weight: 95 kg, - Leasing options available!!! - Modular expandable basic contour measuring system, Z-axis measurement direction downwards Optional functions expandable via software update: - Up/Down measurement direction switch - Roughness measurement - QR code scanner (for probe arms and reference parts) - Data export to QS-Stat (dfq data) - Dominant waviness - Free commissioning and training within a 150 km radius - - Free software update for contour software Scope of delivery: Bledpfezict Aex Ambsi - Complete mechanics with Y-axis adjustment table (17 mm travel) - Integrated controller - PC W11/64-bit; 24" TFT flat screen - ConturoMatic software; operating manual - Dust cover, robust design, water-repellent Technical data: Measuring range X 250 mm Measuring range Z 320 mm Resolution 1 nm Measuring systems: optical incremental System accuracy +/- (0.9 µm + L/100) µm * [L = mm] Probe force control Measuring speed 0.1 - 3.0 mm/s, automatically optimized Positioning speed up to 25 mm/s Table load capacity 35 kg Precision guide on hard stone base Weight 95 kg

Condition: excellent (used), functionality: fully functional, Mitutoyo Microscope Head, FS70Z Model: FS70Z Condition: Used General: 1X/2X focus distance, 50mm laser video microscope housing (FS70Z), Mitutoyo-378-185-1 Accessories: Documentation Bjdpfx Amszh I R Rsboli

Condition: good (used), functionality: fully functional, MKS Instruments, Inc. Atmospheric gas analyzer, quadrupole mass spectrometry, CIRRUS 3 XD Model: CIRRUS3XD Condition: Used Technical data: 240V/110V 600W Accessories: Documentation Bledpfxszh Itls Ambei Cold device connector Network cable

Condition: good (used), functionality: fully functional, Analytik Jena GmbH+Co. KG TOC/TNb analyzer, multi N C 3100 Model: multiNC3100 Condition: Used Technical specifications: 230V AC 50/60Hz 1000VA General: Operating temperature +10 to +35 °C (air conditioning recommended) Maximum humidity 90% at 30 °C Air pressure 0.7-1.06 bar Blodpfx Aszh Iruomboi Storage temperature +5 to +55 °C Humidity during storage 10-30% (use desiccant) Altitude (maximum) 2000 m Accessories: Documentation Power cord Software

Condition: new, “Partially unpacked for photography – unused item from warehouse clearance.” Quantity: 6 available Blsdozh Au Depfx Ambsi Measuring head GT2-H32 Keyence

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, machine/vehicle number: 71257, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Measuring volume: 3,000 mm Accuracy: 0.07 mm MACHINE DETAILS Dimensions & Weight Installation dimensions L x W x H: 1,000 x 500 x 1,000 Bedpfezhuylex Ambjli Weight: 30 kg SCOPE OF DELIVERY Laptop and software (completeness not guaranteed) Transport case Note: The red base on which the laptop is placed is not included in the offer.

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: PZ131117, type of input current: AC, input voltage: 230 V, overall weight: 105 kg, input frequency: 50 Hz, Metrios MT11080 Optical Measuring Machine (2017) Bodjzhumrjpfx Amboli

Condition: good (used), Year of construction: 2018, functionality: fully functional, MITUTOYO Contracer CV-2100M4 Contour Measuring Machine Measuring range, horizontal X = 100 mm Measuring range, vertical Z = 50 mm Travel range, column Z2 = 350 mm Tilt +/- 45° Dimensions (W, D, H) 745 mm x 450 mm x 885 mm Total weight approx. 150 kg Includes PC system Blsdpfxezhuigs Ambji Includes cross table 218-001 Includes rotary vise 2028-003 Further data can be found in the brochure (PDF).

Condition: used, functionality: fully functional, Digital Height Gauge TRIMOS type TVM 600 Travel: 600 mm Bljdpfx Aszg Ux Sombei Column diameter: Ø 45 mm Granit base dimensions (L x W x H): 200 x 140 x 60 mm In working condition

Condition: excellent (used), Year of construction: 2019, operating hours: 27 h, functionality: fully functional, arm reach: 2,230 mm, number of axes: 6, For sale is a high-quality 8520-6 measuring arm from Hexagon. The device was newly purchased in 2019 and is in very well-maintained condition. Due to minimal usage, the measuring arm is now being offered for sale. Features & Scope of Delivery: • Measuring arm including stable base plate with mounting ring, offering a working volume of 2 m • Magnetic mounting plate for flexible installation • 3 mm ruby touch probe • 6 mm ruby touch probe • 15 mm steel touch probe • Calibration sphere (reference sphere for calibration) • Length standard • 2 rechargeable batteries including charger for mobile use Bjdpezg Tmujfx Amboli • Sturdy transport case + separate accessory case • Hook wrench • Various additional accessories for immediate operation Software: • Quindos 7 basic license included • USB stick with RDS 5.2.0.8058 software and license key Other: • Renishaw TP20 touch trigger probe kit Inspection appointments can be arranged on request. If you are interested or have any questions, please feel free to contact us.

Condition: like new (used), Year of construction: 2024, operating hours: 1 h, functionality: fully functional, machine/vehicle number: EG4030-i4, Eccentricity measuring device for cross-sections from 30 to 300 mm². Bodpfx Ajzg H S Domboli

Condition: new, operating hours: 8 h, functionality: fully functional, machine/vehicle number: #BC0Q000005, Equipment: documentation/manual, type plate available, For Sale: KEYENCE VL-770 3D Scanner Bodpfozg Dpmox Ambjli We are offering for sale a professional KEYENCE VL-770 3D scanner, which was purchased in the Czech Republic directly from KEYENCE for our company’s needs (VAT excluded). This is a sale of company assets. Date of acquisition: 28.02.2025 Condition of the equipment: in exceptionally good condition, practically like new. Usage: the equipment was used very sparingly, only for a few short measurement tasks. Storage: the equipment was stored in a very clean and controlled environment within the R&D department at all times. Operational load: the scanner was not deployed in serial production; the equipment was used without any intensive or industrial load. Key advantage of this offer: it is an almost new piece of technology purchased directly from the manufacturer, offered at the price of used equipment, with no waiting times and without the need for further initial investments. Included in the package: • VL-770 Measurement head • VL-700 Controller • VL-730 300mm stage • VL-C33 Light shielding cover for 300mm stage • VL-A3E VL Series Software Set (English) Price: • €27,000 excluding VAT If you are interested or would like more information, please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, warranty duration: 3 months, This complete used package includes: 1 Leica Blk 360 scanner, 2021 model. 3 Batteries. 1 Charger. 1 Tripod. 1 Carrying case. Firmware updated, scan data downloadable via Wi-Fi and USB. Very good condition! 3-month warranty. Calibration certificate. 💥 €9,500 (excluding VAT) 💥 VAT recoverable. Bedjzgw Ipopfx Ambjli Delivery possible throughout Europe. TOPOGRAPHIE CONSEILS Alternative solutions for measurement and software. Phone: 06 87 86 91 89

Condition: good (used), Keyence Type: VR-6200 + VR-6000 Technical data: Measurable XY range: 300 mm × 150 mm *2 Object table XY travel range: 278 mm × 134 mm Z travel range: 69 mm Load capacity: 4.5 kg Working distance: 75 mm Bjdpfx Aszgr D Ejmboli Image acquisition device: 4-megapixel CMOS, B/W Macro mode: Magnification (based on a 15-inch monitor): 12× Horizontal: 24.0 mm Vertical: 18.0 mm Magnification (based on a 15-inch monitor): 25× Horizontal: 12.0 mm Vertical: 9.0 mm Magnification (based on a 15-inch monitor): 38× Horizontal: 8.0 mm Vertical: 6.0 mm Magnification (based on a 15-inch monitor): 50× Horizontal: 6.0 mm Vertical: 4.5 mm Micro mode: Magnification (based on a 15-inch monitor): 40× Horizontal: 7.6 mm Vertical: 5.7 mm Magnification (based on a 15-inch monitor): 80× Horizontal: 3.8 mm Vertical: 2.9 mm Magnification (based on a 15-inch monitor): 120× Horizontal: 2.5 mm Vertical: 1.9 mm Magnification (based on a 15-inch monitor): 160× Horizontal: 1.9 mm Vertical: 1.4 mm Zoom: 1× to 4× Display resolution: 0.1 μm Height measuring range Without image composition in Z Macro mode: 10 mm Micro mode: 1 mm With image composition in Z Macro mode: 50 mm Micro mode: 30 mm Repeatability (σ) Without image composition in Z 0.4 μm *1 With image composition in Z 1.0 μm *1 Measuring accuracy Without image composition in Z ±2.5 μm *1 With image composition in Z ±4.0 μm *1 Only 50 operating hours! Includes software CD, but no PC! Condition: (Like new!) For further technical information, please refer to the manufacturer. Scope of delivery: (As shown in the picture!) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), DMG Microset ECO 210: a professional tool setting and measuring device for cutting tools. This machine is used for the precise measurement of length, diameter, and geometry of tools before they are installed in a CNC machine tool, which significantly reduces setup time and increases machining accuracy. The device is complete and equipped with a control computer, monitor, keyboard, mouse, and a set of measuring adapters as shown in the pictures. Technical data: * Manufacturer: DMG Microset GmbH * Model: ECO 210 * Year of manufacture: 2008 * Power supply: 230 V * Maximum power consumption: 650 VA * Country of manufacture: Germany Equipment: Bsdpfozgcdiox Ambjli * Control computer * LCD monitor * Keyboard and mouse * Tool and accessory cabinet * SK50 / HSK63A adapter * SK50 / SK40 adapter * HSK40 ring * DMG Microset calibration standard * Microvision III documentation (as shown in the pictures) Technical condition: * Used * Functional * Last service performed by HAIMER (service sticker visible on the device) * Good visual condition, normal signs of use Applications: * CNC machining centers * CNC milling machines * Tool rooms * Maintenance departments * Manufacturing plants and precision metalworking The sale includes exactly what is shown in the pictures. The device can be inspected before purchase, by prior arrangement.

Condition: excellent (used), Here, we offer an ETSYSTEM electronic load with GPIB interface. 32615A AC & DC Electronic Load GPIB/RS232, 300V, 108A, 10800VA The 3260A series is a 300V high-performance AC and DC load in a single unit, offering an ideal test solution for UPS, AVR, and DC/AC inverters, especially for devices under test with step or square wave forms. Each AC&DC load in the high-performance series features its own control and display panel and a 5-status recall/memory storage, enabling more efficient load setup. The adjustable power factor setting (PF, range: 1, 0.85 ~ -0.85) expands the simulation of the test environment. The integrated GO/NG measurement device test function provides a quick diagnosis of test results for production and QC test throughput. Features: Voltage, current, power, and VA variable display. Blodpfx Amszd Uh Iobei CC, linear CC, CR, and crest factor mode. GPIB/RS232 interface and 5 status recall/memory storage. Power factor (PF) adjustable: 1, 0.85 ~ -0.85. Upper/lower threshold capability. Protection against V, I, W, and ℃. Dual 4 1/2-digit display for voltage, current, power, and VA. Suitable for sine, square, and step waves. Width 600 mm, Height 1506 mm, Depth 600 mm 196 kg Type: 32615A AC & DC Electronic Load Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), Keyence Here we offer a 3D profilometer. Technical specifications: Observation and measurement range: Horizontal: mm 24.0 12.0 8.0 6.0 7.6 3.8 2.5 1.9 Vertical: mm 18.0 9.0 6.0 4.5 5.7 2.9 1.9 1.4 Bljdpfszd Uhzjx Ambsi Measurement resolution 0.1 μm: Height measurement: Height measurement range, without image composition in Z: 10 mm 1 mm With image composition in Z: 50 mm 30 mm Repeatability (σ)*1, without image composition in Z: 0.4 µm With image composition in Z: 1.0 µm Width measurement: Measurement accuracy*1, without image composition in Z: ±2.5 μm With image composition in Z: ±4.0 μm Repeatability (σ) *1 1 μm 0.5 μm Measurement accuracy*1 ±5 μm ±2 μm XY travel: 184x88 mm Z travel: 73 mm Includes control unit VR-5000 + software with licenses Type: VR-5200 + VR-5000 For sale from our location! Condition: fully functional + no signs of wear For further technical information, please refer to the manufacturer. Scope of supply: (As shown in the picture) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone.