Resell CNC

Condition: good (used), COLCHESTER COMBI 4000 is a CNC turning lathe engineered for precision, high accuracy and reliability. Capacities: distance between centres 2000 mm, turning diameter over cross-slide 370 mm, swing over bed 554 mm, max turning length 2000 mm; Z travel 1920 mm, X travel 290 mm, spindle hole 104 mm, spindle nose D1-11, Camlock D1-6, tailstock Morse 6 CM, spindle stroke 178 mm Ø95 mm. Specs: 3-step speeds 16–1800 t/min, rapid traverse 10 m/min, spindle motor 11/7.5 kW, 50 Hz 3×380 V, weight ~4000 kg, overall L3300×W1800×H1700 mm. Equipment: 3‑jaw Ø400 mm and 4‑jaw Ø700 mm chucks, faceplate Ø680 mm, 90 l coolant, MULTIFIX toolholders, toolholder sets and reducing bushes, lamp, tailstock, steady, drill chuck, chuck protection. Delivers tight tolerances; ideal for automotive, aerospace, medical, watchmaking and machine tool sectors. Ffsdpsx S N Hdsfx Agmot

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, turning diameter over cross slide: 340 mm, turning length: 1,100 mm, spindle bore: 63 mm, Diameter in offset 600 mm, max. workpiece weight 1000 kg, 1200 Nm, spindle speeds 625-2500 rpm, 20 kW Ffsdpfx Agsx Sxb Djmjt

Condition: good (used), Year of construction: 2024, Ref. -No.: 10605 Manufacturer: VDF WOHLENBERG Type: E 1000 Year of construction: 2024 Type of control: CNC Control: Sinumerik Storage location: Halberstadt Country of origin: Germany Machine-No.: 32XX Turning Diameter Over Bed: 1500 mm Turning Diameter Over Slide Rest: 1150 mm Fodsx Sw Ntepfx Agmoft Centre Height: 750 mm Centre Distance: 9000 mm Faceplate Diameter: 1000 mm Spindle Bore: 80 mm Spindle Speed Min.: 1,4 - 280 RPM Turning diameter over cross slide: 800 mm Swing diameter over cross slide: 800 mm Space requirement: 13000 x 2650 x 2250 mm Power Capacity: 320 kW Weight Of The Machine Ca.: 8 t Max. turning diameter (in the offset): 2000 mm Size of the inner cone: metr. Kegel 1:20 quill cone: 80 O

Condition: good (used), Year of construction: 1985, Ref. -No.: 10595 Ffsdpjx Sw Naefx Agmot Manufacturer: GILDEMEISTER MAX MüLLER Type: MD 6S Year of construction: 1985 Type of control: CNC Control: EPL 4 Storage location: Halberstadt Country of origin: Germany Tool holder type: 2 x VDI 50 Centre Distance: 1765 mm Spindle passage: 101 mm Swing diameter over bed: 720 mm Swing diameter over cross slide: 490 mm Lathe chuck diameter, max.: 400 mm Power Capacity: 50 kW Weight Of The Machine Ca.: 16 t Turning Speed Range: 10 - 2800 rpm Quill holder: MK 5 Further information: - Equipment - Powered tools - Tailstock - Automatic quill stroke - Chip conveyor - Automatic sliding safety doors - Hydraulic steady rest - 2 turrets

Condition: excellent (used), Year of construction: 2008, turning diameter over cross slide: 1,140 mm, turning length: 12,000 mm, turning diameter: 1,540 mm, spindle bore: 150 mm, CNC Lathe Giuseppa Gianna - GGH 1100/760 x 12.000 CNC 3 bed way construction Bed width 1100 mm 3 x C-Type Steady rest on lower base with in feed 2 x Fixed steady rest 300 - 800 mm with 5 ton 2 x Chip conveyor 4 Chuck 1000 mm Barafuldi 4 way turret head Swing over bed Ø: 1520mm Swing over cross slide Ø:1140mm DBC Turning Length: 12000mm Spindle bore: 150mm Spindle power: 80kW Bed width: 1100mm Tailstock spindle Ø: 6Ø Workpiece weight: 20000 Power: 80A Speeds / ranges: 0-800Rpm Feed rate X-Axis: 0-8000mm/min. Feed rate Z-Axis: 0-8000mm/min. Length: 23000mm Width: 7600mm Ffodjx Swmljpfx Agmot Height: 3800mm Weight: 58000kg

Condition: ready for operation (used), Year of construction: 1976, functionality: fully functional, turning length: 5,000 mm, turning diameter: 1,550 mm, Turning diameter: 1,550 mm Distance between centers: 7,000 mm Fjdsx Sdqqepfx Agmjft Faceplate: 0.63 to 63 rpm Max. workpiece weight: 50 t Machine weight: approx. 80 t

Condition: refurbished (used), Year of construction: 1974, functionality: fully functional, swing diameter over cross slide: 820 mm, swing diameter over bed slide: 1,120 mm, controller manufacturer: NUM, controller model: 1020 / 1040 / 1060, distance between centers: 7,000 mm, year of last overhaul: 2007, Conventional high-capacity parallel lathe, Ffsdpfsx H S Dbox Agmet refurbished in 2007, equipped with NUM CNC control, a large-size chuck, and a chip conveyor

Condition: good (used), functionality: fully functional, Machine specifications: Swing over bed: 1300 mm Maximum turning length: 4000 mm Ffsdpfx Aex H Ifzogmjt Description: The machine is in good technical condition; test run is possible by prior arrangement. Machine weight: 15,800 kg Machine dimensions (L x W x H): 7,425 x 3,475 x 2,535 mm Connected load: 82 kVA Center height over bed: 650 mm Maximum workpiece weight between centers: 10,000 kg Maximum swing / machinable diameter over cross slide: 940 mm Maximum swing / machinable diameter over bed: 1300 mm Maximum turning length / distance between centers: 4000 mm Spindle bore diameter: 104 mm Spindle diameter at front bearing: 180 mm Spindle speed range (rpm): 1st gear 0-100, 2nd gear 0-200, 3rd gear 0-400, 4th gear 0-800 Rapid traverse of longitudinal slide – max. working feed: 8 m/min Rapid traverse of cross slide – max. working feed: 6 m/min Tailstock quill diameter: 180 mm Quill stroke: 300 mm Accessories: SAUTER turret 0.5.480.532, Universal chuck 800 mm, Faceplate 1200 mm, Steady rest – small 300 mm, Steady rest – large 500 mm, Chip conveyor with container.

Condition: excellent (used), Year of construction: 2022, turning length: 1,650 mm, spindle bore: 181 mm, travel distance X-axis: 470 mm, Tool eye SMW 3 chuck 630-165 mm Ffjdpfx Agex Eivpsmst SMW Steady rest 85 - 350 mm LNS Chip conveyor DORMATEC Air Filter 30 m3 Max. turning Ø: 1030mm X-Axis: 470mm Z-Axis: 1650mm Spindle bore: 181mm Speedrange: 1500Rpm Spindle power: 41kW ATC / revolver: 12 Speed live tools:3000Rpm Power live tools:9kW Chip conveyor: yes Tool eye: yes Pinole taper: 6Mk Stroke pinole: 150mm Quill Ø: 160mm Length: 7350mm Width: 3160mm Height: 2800mm Weight: 22000kg

Condition: used, Year of construction: 2014, functionality: unexamined, turning length: 6,500 mm, TACCHI HD/3 105H S CNC Lathe, 1991/2014 retrofit - Siemens 840D CNC - Center height 800 mm - Swing over bed 1350 mm - Swing over carriage 950 mm - Distance between centers 5000/6500 mm - Spindle bore 220 mm - Spindle speed 2 to 720 rpm - Spindle motor power 75 kW - 3 speed ranges - 12-position turret - weight between centers 11,000 kg - weight on spindle 2,900 kg - hydraulic follow rest. Fjdex Edu Tjpfx Agmoft

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: FXH14B001, turning length: 1,600 mm, spindle speed (max.): 2,500 rpm, travel distance Z-axis: 900 mm, workpiece weight (max.): 8,000 kg, table diameter: 1,250 mm, The machine has only been used approximately 5 times! TECHNICAL DETAILS Travel X-axis: −685 mm to +680 mm Travel Z-axis: 900 mm Travel W-axis: 800 mm Max. swing diameter: 1.600 mm Max. turning length: 1.600 mm Max. workpiece weight: 8,000 kg Table Table diameter: 1,250 mm Low speed: 5–120 rpm High speed: 150–300 rpm Machining spindle Spindle speed: 25–2,500 rpm Max. spindle torque: 478 Nm C-Axis Nominal speed: 3.33 rpm Feed range (milling): 0.1–3,000 mm/min Feed range (turning): 0.01–500 mm/rev Tool changer Tool shank: BT50 Tool magazine capacity: 16 Max. tool diameter: 220 mm Max. tool length: 500 mm Max. tool weight (milling): 25 kg Max. tool weight (turning): 50 kg Tool change time: 30 s MACHINE DETAILS Control brand: Fanuc 0i-T Dimensions Machine height: 5,625 mm Machine weight: 22,000 kg Supply Fjdpfxsx Atpbj Agmsft Electrical connection: 90 kVA Air requirement: 5.5 kg/cm² Coolant capacity: 150 l

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, For sale: this lathe. Swing diameter over bed: 1,000 mm. Turning length: 4,000 mm. Sinumerik 840D control. Ffodpfx Agexzr Rbemot

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, We are selling this lathe. Distance between centers: 8,000 mm. Center height: 1,100 mm. Max. turning diameter over support: 1,550 mm. Max. turning diameter over bed: 1,600 mm. Max. workpiece weight between centers: 30 t. Siemens Sinumerik 840D. The machine is currently finishing an order and will be available from the end of January 2026. Fedpfx Aexzr A Degmsft

Condition: new, functionality: fully functional, Universal centre lathe ŠKODA SRM 125 - 4000 after modernization of the mechanical part of the machine. The electrical part is equipped with Siemens CNC control: SIEMENS SINUMERIK 828D with SINAMICS drives. Technical data: Ffjdpfxoxyxdxj Agmet Maximum swing over bed: 1,250 mm Maximum swing over carriage: 900 mm Maximum distance between centres: 4,000 mm Maximum workpiece weight: 14,000 kg Maximum torque: 34,000 Nm Minimum turning diameter: 200 mm Bed height: 620 mm Bed width: 1,100 mm Spindle nose: No. 10 Number of speed ranges (infinitely variable in each range): 3 Spindle speed range: 1.4 – 350 rpm Main spindle drive motor: 39 kW, fixed gear ratio 1:3 Maximum workpiece diameter in jaws: 1,030 mm Spindle centre taper: 80 mm – 1:10 Centre height above bed: 630 mm Carriage: Feed rate (Z and X axes): 2,000 mm/min Rapid traverse (Z axis): 6,000 mm/min Rapid traverse (X axis): 3,000 mm/min Traverse motor (Z axis): Siemens 1FK7 101, 27 Nm, with planetary gearbox Traverse motor (X axis): Siemens 1FK7 060, 6 Nm, with planetary gearbox Maximum tool section: 70 × 70 mm Maximum tool section for turret head: 50 × 50 mm Tailstock: Quill stroke: 200 mm Tailstock centre taper: 80 mm, 1:10 Tailstock feed rate: 2,000 mm/min

Condition: excellent (used), Year of construction: 2001, turning length: 8,000 mm, turning diameter over bed slide: 2,000 mm, workpiece weight (max.): 25,000 kg, turning diameter over top slide: 1,550 mm, Swing over bed Ø: 2000mm Swing over cross slide Ø:1550mm DBC Turning Length: 8000mm Fjdpfx Ajxxxbzjgmsft Spindle bore: 150mm Spindle power: 95kW Bed width: 1400mm Tailstock spindle Ø: 260Ø Stroke pinole: 200mm Spindle taper: Metric 80Mk Workpiece weight: 25000 Power: 95A Speeds / ranges: 360Rpm Feed rate X-Axis: 0 - 6000mm/min. Feed rate Z-Axis: 0 - 6000mm/min. Length: 16000mm Width: 5000mm Height: 3800mm Weight: 80000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, functionality: fully functional, turning diameter over cross slide: 1,400 mm, turning length: 7,000 mm, turning diameter: 1,780 mm, spindle bore: 120 mm, bar passage: 120 mm, CNC PARALLEL LATHE (HEAVY-DUTY) MEUSER Technical Specifications Brand: Meuser Model: D1400 Distance between centers: 7000 mm Swing over bed: 1780 mm Swing over carriage: 1400 mm Spindle bore: 120 mm CNC: Fagor 8055 (Year 2015) PRICE AND FURTHER INFORMATION ON REQUEST Ffsdpfx Ajxxa N Tsgmot (CNC, SIEMENS, HASS, LAGUN, FAGOR, CINCINNATI, HEIDENHAIN, MACHINING, PINACHO, MORISEIKI, MILLING MACHINE, LATHE, GRINDER, BORING MACHINE, PRESS, LASER, SHEAR, PRESS BRAKE)

Condition: used, Year of construction: 1996, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Geminis Lathe Ffedpjxvr E Iofx Agmot Type: CNC5/PLUS/1000/4000 CNC control: Fagor Year: 1996 With 2 steadies + Tooling With 2 chucks Can be inspected under power Video available

Condition: used, faceplate diameter 4.000 mm travel -x axis 4.500 mm travel -z axis 600 mm control Siemens Sinumerik 840D-sl feed range 0 - 8.000 mm/min turning speeds 1) 0,7 - 5,6 U/min turning speeds 2) 2,8 - 22,4 U/min turning speeds 2,1 - 56 U/min tool taper Sauter Facing Lathe | ZERBST - DP05/W08 Scope of delivery: - Chip conveyor - Hydraulic unit Fedpfxexr Rbtj Agmeft The ZERBST - DP05/W08 has been retrofitted in 2010. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DP05W08 | DP05 W08 | DP05-W08

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Swing over bed 1,300mm, over cross slide 1.000mm, swing in gap 2,100mm, center distansen 1,500mm, 2,350mm with open bed. Spindle bore 128mm, 450 Rpm, 50 Kw, Chuck 800mm, 4-jaw plate 900mm. Fagor CNC, weight ca 12.000kg Fedoxqp I Nepfx Agmjft

Condition: used, Year of construction: 1996, turning diameter over cross slide: 1,100 mm, turning length: 3,000 mm, overall weight: 10,500 kg, Machine in good condition. Guideways without wear. Included: chip conveyor, coolant system, 4 tool holders, and service documentation. Swing over bed Ø - 1100 mm Swing over cross slide Ø - 730 mm Swing in the gap Ø - 1130 mm Turning length DBC - 3000 mm Gap length - 230 mm Spindle bore - 128 mm Spindle power - 45 kW Bed width - 600 mm Tailstock quill Ø - 140 mm Quill stroke - 300 mm Spindle taper - 6 Mk Speeds / ranges - 1120 rpm Feed rate X-axis - 10,000 mm/min Feed rate Z-axis - 5,000 mm/min. Fedpoxqm Dbefx Agmoft

Condition: ready for operation (used), Year of construction: 1978, functionality: fully functional, turning diameter over cross slide: 960 mm, turning length: 10,000 mm, turning diameter: 1,300 mm, spindle bore: 160 mm, Lathe Wohlenberg model M 1000 BSN in excelent condition. Machine were retrofited with Siemens 802. Machine is under power and it can be tested.Two steady rest Fsdpfx Agexprrbjmjft

Condition: used, Year of construction: 2013, Control Heidenhain iT Plus Dimensions (L x W x H) 6,55 x 3,46 x 2,40 m weight of the machine 14.500 kg --> Technical details Operating hours: 43,506 h --> Spindle hours: 25,244 h --> Spindle box left: --> Chuck diameter: 315 mm Fedpfxexpizge Agmsft --> Spindle flange diameter: 1705 mm --> Spindle bore: 104 mm --> Spindle diameter in front bearing: 130 mm --> Drive power (100% duty cycle): 25 kW --> Drive power (40% duty cycle): 32 kW --> Torque (100% duty cycle): 280 Nm --> Torque (40% duty cycle): 360 Nm --> Speed range: 0–5,000 rpm --> Speed of C-axis: 2,000 rpm --> Spindle box on the right: --> Chuck diameter: 315 mm --> Spindle flange diameter: 1,705 mm --> Spindle bore: 87 mm --> Spindle diameter in front bearing: 130 mm --> Drive power (100% duty cycle): 25 kW --> Drive power (40% duty cycle): 32 kW --> Torque (100% duty cycle): 280 Nm --> Torque (40% duty cycle): 360 Nm --> Speed range: 2,000 rpm --> Right spindle housing: --> Chuck diameter: 315 mm --> Spindle flange diameter: 1705 mm --> Spindle bore: 87 mm --> Spindle diameter in front bearing: 130 mm --> Drive power (100% duty cycle): 25 kW --> Drive power (40% duty cycle): 32 kW --> Torque (100% duty cycle): 280 Nm --> Torque (40% duty cycle): 360 Nm --> Speed range: 2,000 rpm --> Slide 1: --> Longitudinal travel: 1,200 mm --> Cross travel: 490 mm --> Vertical travel Y: ±100 mm --> Slide 2: --> Longitudinal travel: 1,200 mm --> Cross travel: 195 mm --> Slide 3: --> Longitudinal travel: 1,200 mm --> Turning/milling spindle: --> Tool holder: Capto C6 --> Spindle speed: 12,000 rpm --> Drive power (100% duty cycle): 20 kW --> Drive power (40% duty cycle): 22 kW --> Torque (100% duty cycle): 79 Nm --> Holding torque, locked: 1,000 Nm --> Swivel range: ±110 degrees --> Tool magazine: --> Number of tools: 120 --> Max. tool length: 300 mm --> Max. tool diameter: 80 mm --> Max. tool weight: 7 kg --> Tool carrier 2: --> Number of tool stations: 12 --> Shank diameter according to DIN 69880: 40 mm --> Number of driven tool stations: 12 --> Max. speed: 4,000 rpm --> Max. power: 11.3 kW

Condition: used, Year of construction: 1988, turning diameter over bed 2000 mm turning diameter over slide rest / mm turning length / mm - Type 1 K 671 320 F3 - Year of manufacture 1988 (first commissioned in 1998) - Turning length 10,000 mm - Turning diameter over bed 2,000 mm (modified) - Faceplate diameter 1,950 mm - Faceplate clamping range 400 - 1,350 mm - Speeds 1.00 - 140 rpm - Torque 125,000 Nm - Main cutting force 130 kN max. - Automatic swiveling tailstock - Max. workpiece weight 70 tonnes - Max. workpiece weight with steady rest 100 tonnes - Drive power 100 kW - Number of bed ways 4 - Dimensions 22,000 x 6,200 x 2,900 mm - CNC control SIEMENS 840D (2010 for €220,000.00) - Support feed X-Z 0.3 - 4,000 mm/min. - Support rapid traverse X-Z 4,000 mm/min. - Inner cone dimensions 140 x 1:7 - The machine complies with CE guidelines - Includes 2 steady rests, 1 roller block, 4 jaws, boring device - Condition: very good condition Fsdpfx Agsxn Tz Iomsft

Condition: good (used), Year of construction: 1988, Description: Heavy-duty, high-precision horizontal lathe with Rohm hydraulic clamping system, slide with two working positions, Sauter 4-position tool turret, circular turning unit, CNC 6 axes, tailstock, chip conveyor. Suitable for both high-volume material removal and high-precision turning. Machine modified with a 2000 mm face clamping plate and increased in size. Year of production: 1988 Made in: Germany Turning diameter over bed: 2500 mm Turning diameter over telescopic covers: 2200 mm Turning diameter over slide: 1400 mm Turning length: 6000 mm Three-jaw chuck table: 2000 mm Spindle bore: 200 mm Attachment for circular turning Workpiece weight: 4,500–40,000 kg Turret head: 4 positions Fjdpexmb Adefx Agmsft Spindle speed range: 4 – 400 rpm Main motor Siemens 95.5 kW Maximum torque: 40,000 Nm Overall power requirement: 125 kW Control: CNC SIEMENS 8T, 6 controlled axes Machine weight: 43,000 kg Required space: 13,000 x 4,000 mm

Condition: like new (used), Year of construction: 2021, operating hours: 1,200 h, functionality: fully functional, turning diameter: 1,100 mm, power: 46 kW (62.54 HP), distance between centers: 2,000 mm, load hours: 1,200 h, A DMT CD1100 lathe with Heidenhain control and only 1200 operating hours is available. The working area includes a swing diameter of approx. 1100 mm over bed and approx. 800 mm over cross-slide. The tool holder is a Multifix D1. The distance between centers is 2000 mm. The main spindle drive is a motor with 46 kW power at 60% duty cycle and features a two-speed gearbox. Ffsdpfx Agsxlza Hjmet Tailstock: - Quill diameter: 125 mm - Taper: 6 Mk Electrical equipment: - Three-phase current: 400 V, 50 Hz - VDE and EMC directives EN50081-2 / EN50082-2 Delivery: Collection by the buyer Payment: 100% prepayment by bank transfer immediately upon invoicing All details are subject to change and prior sale is reserved. The machine is sold without any warranty claims and remains our property until full payment has been received.