Lötters Metallwaren GmbH

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, TECHNICAL SPECIFICATIONS: Press Model: T65 CNR4 Year of manufacture: 2002 Nominal force: 500 kN Mass: 5,000 kg Strokes per minute: 73 Maximum insertions per minute: 36 Operating air pressure min./max.: 4–5.5 BAR Hnedpfx Ahox Ura Sjujg Braking time: 0.154 s Safety distance: 246 mm Energy: 3440 KJ Adjustable stroke min./max.: 10–120 mm Ram adjustment: 100 mm High shut height adjustment: 320 mm Maximum extraction stroke: 40 mm Worktable surface: 820x580x68 mm Ram plate dimensions: 470x340 mm Distance between table and ram: 280 mm Shank diameter: 45 mm Slide from center: 280 mm Maximum die dimensions: 470x340 mm Upper die weight: 136 kg Voltage: 400 V Hydraulic overload protection Supplied with instruction manual and CE conformity Mechanical warranty: six (6) months Electrical panel warranty: twelve (12) months NEWLY INSTALLED COMPONENTS: • Motor bearings; • Flywheel bearings; • Swivel joint bearings; • Countershaft bearings; • Clutch plates; • Clutch pins and flanges; • Clutch seals; • Hydraulic overload seal; • Hydraulic overload hose; • Equalizer cylinder seals; • Air gauges; • Front and side safety guards with safety keys; • Worktable reground on CNC machine; • Foot pedal; • Electrical panel with remote support.

Condition: excellent (used), Year of construction: 1988, Rated deformation force kN 630 Stroke mm 10 - 105 Shut height mm 335 Throat mm 315 Passage mm 355 Slide adjustment mm 70 Hsdpfjx Sqtlsx Ahusng Number of slide strokes /min 65/130 Slide area mm 450 x 280 Table area mm 800 x 630 Pressure MPa 0,5 Main motor output kW 5,0/7,5 Total input kVA 10,4 Machine dimensions mm 1425 x 1790 x 2550 Machine weight kg 5850

Condition: good (used), Year of construction: 1978, Press capacity: 63 t Hodpfjx Rvbfex Ahujng Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE – 44143 Dortmund - Wambel / Germany

Condition: good (used), Year of construction: 2016, machine/vehicle number: 161138, Offer 25457 Technical Data: - Press force: 60 t - Throat depth: 250 mm - Table size approx.: 700 x 500 mm - Drop-through hole in table: 180 mm - Max. distance table – slide plate: 360 mm - Pin hole in slide: 45 mm - Slide adjustability: 60 mm - Stroke adjustment: 10 - 100 mm Hedpfx Ajx I Iqyehujng - Max. stroke rate: 65 strokes/min - Pneumatic connection - Drive: 400 V / 5.5 kW - Space requirement approx.: W 1200 x H 2400 x D 1500 mm - Weight approx.: 3500 kg - With: pneumatically operated clutch - Mechanical overload protection - Light barrier - Central lubrication - Two-hand control desk with foot switch

Condition: excellent (used), Rijva EP 180 180 tons Hnodpfx Ahex Ic Umsujg 50 strokes/min. Adjustment 28 - 140 mm Weight 12,000 kg

Condition: used, Year of construction: 1988, stroke 16-140 mm Hodpfxex H Txye Ahusng pressure 75 t weight 4,6 t

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 23.05.5021, table width: 700 mm, table length: 500 mm, overall weight: 3,500 kg, pressing force: 61 t, stroke length: 100 mm, TECHNICAL DETAILS Nominal force: 600 kN Single stroke: 32 strokes/min at 1,400 rpm Continuous stroke: 65 strokes/min at 1,400 rpm Distance ram–table: min. 265 mm / max. 365 mm Stroke: 0 – 100 mm Die depth: 250 mm Table dimensions: 500 x 700 mm Tool dimensions: max. 215 x 340 mm MACHINE DETAILS Air pressure: min. 4 bar / max. 6 bar Drive Motor power: 5 kW Motor speed: 1,400 rpm Flywheel speed: 1,400 rpm Hsdpsx Hyq Aofx Ahusng Electrical data Input voltage: 380 – 400 V, 50 – 60 Hz Total power: 5 kW at 380 V Machine weight: 3,500 kg

Condition: used, total height: 1,850 mm, total width: 1,750 mm, total length: 750 mm, Empty weight: 2.000 kg Price: On request Kraftformer - Powerformer 6mm Steel - Documentation available: Yes - CE certificate present: No - Motor power: 3.0kW - Throat depth: 600mm - Min. stroke: 8mm - Model: Eccentric - Height adjustment: 80mm - Transport dimensions: 750mm x 1750mm x 1850mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Hnsdpjx Ek R Djfx Ahueg Lukas van Rossum

Condition: used, Year of construction: 1999, Manufacturer: Ebu Model: STA 100/1000 P2 Serial number: 54203/05G Year of manufacture: 1999 Pressing force: 1,000 kN Stroke adjustment: 8 - 140 mm Ram strokes: 50 – 180 strokes/minute Location: 41751 Viersen, Germany Condition: Used, functional Price: €36,974 net / €44,000 gross You are welcome to submit a price offer. Reasonable counteroffers will be considered. When making inquiries, please include your complete contact details. Additional photos available upon request. You are also welcome to view the machine on site. Simply call us to schedule an appointment. This item is being sold as part of insolvency proceedings and shows signs of use accordingly. Maintenance and professional cleaning are the responsibility of the buyer. Hjdpfsx Ea Shjx Ahujng Sale is made without any warranty. Liability, reduction, and rescission are expressly excluded. We recommend inspection prior to purchase, as the item is sold as seen. All information provided is without guarantee. Subject to errors and prior sale. The item is sold as inspected on site, in used condition, with retention of title, and under exclusion of any liability for visible and hidden defects, in particular technical, qualitative, or performance-related defects and usability. Due to time constraints, only serious inquiries and reasonable offers will be answered! This is solely an advertisement for informational purposes. Inspection by appointment only! Best regards

Condition: defective spare-parts repository (used), Year of construction: 1974, functionality: not functional, machine/vehicle number: 121645, table height: 910 mm, table width: 650 mm, stroke adjustment: 63 mm, overall weight: 4,000 kg, pressing force: 63 t, space requirement length: 1,200 mm, space requirement width: 1,900 mm, space requirement height: 2,800 mm, The eccentric press has a clutch defect and is currently non-operational. Hnedpfxox D Tngo Ahueg Without the column stand mounted in the pictures.

Condition: used, Year of construction: 1989, total height: 2,750 mm, total width: 1,700 mm, total length: 1,600 mm, Empty weight: 4.000 kg - Year: 1989 - Documentation available: No - CE certificate present: No - Serial number: 4414 - Motor power: 5.5kW - Table width: 560mm - Table length: 800mm - Ram width: 300mm - Ram length: 450mm - Min. stroke: 8mm - Model: Eccentric - Max. stroke: 100mm - Number of columns: 1 - Power: 63.0ton - Transport dimensions: 1600mm x 1700mm x 2750mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Hnjdpfx Aex Dkfpohusg VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), functionality: fully functional, tested machine : Power 75 tons Stroke rate 90 strokes throat depth 300 mm ram stroke 16 - 140 mm ram adjustment 80 mm with shield , . new UVV-tested Hnedpfxox Dht De Ahuog .

Condition: excellent (used), functionality: fully functional, I am selling this line, which consists of the following press, decoiler, straightener, and Rebenda VP 205 CNC roller feeder. The line has been dismantled and stored in a warehouse. Excellent condition, regularly maintained. Hsdpfx Ahexz Dnxjusng

Condition: good (used), Year of construction: 1960, machine/vehicle number: P4461960, Offer 25471 Technical Data: - Pressing force: 75 t - Throat depth approx.: 300 mm - Table size approx.: 800 x 600 mm - Height-adjustable table Hnsdpfx Ahoxxwc Rsueg - Stroke adjustment approx.: 16 - 140 mm - Ram adjustment: 80 mm - Strokes per minute: 80 - Pneumatic connection - Drive: 400 V - Space required approx.: W 1800 x H 2450 x D 2000 mm - Weight approx.: 4000 kg

Condition: like new (used), functionality: fully functional, COFMO punching press, type KD 2128, capacity 63 tons, table 800x560 mm, ram 450x320 mm, stroke 10/100 mm, variable speed from 60 to 160 strokes per minute, ram adjustment 80 mm. Machine supplied with certificate of conformity and complete documentation. Can be inspected in good working condition. Hedpsxxrvfjfx Ahueng

Condition: good (used), Year of construction: 1986, functionality: fully functional, Pressing force: 1250 kN, stroke rate: 55 min⁻¹, ram adjustment: 75 mm, stroke: 20–120 mm, motor power: 11 kW, voltage: 380 V, machine weight: 8.6 t, throat depth: 340 mm, ram clamping surface: 620 x 300 mm, table clamping surface: 650 x 1000 mm, Ortlinghaus hydraulic clutch with double brake, two-hand control, ram damage has been professionally repaired. Hedpfjxxa Aasx Ahueng

Condition: used, Year of construction: 2000, operating hours: 5,840 h, functionality: fully functional, machine/vehicle number: 510565, Offered for sale is an eccentric press. Make: Müller Weingarten Type: C40.2.2 Rated force: 40t Two-hand / foot control Safety light curtain by Sick Hsdoxvqnbjpfx Ahusng Used, fully functional condition. Collection by buyer; support for disassembly/transport can be organized if needed. If you are interested or have any questions, please feel free to send me a message. On-site inspection available by appointment. Further metalworking machinery available, such as bench drills, press brakes, pillar drills, eccentric presses, heavy-duty racks, welding tables, MIG/MAG welding machines, compressors, etc. – please see my other listings. Collection only – disassembly and transport by the buyer or by agreement. If you are interested or have any questions, please send me a message. Further photos and technical details available on request. All information provided without guarantee or warranty; errors and prior sale excepted. For more inquiries, please call. Nous parlons Francais / Мы говорим по русски We speak English / Noi vorbim românește Viber / WhatsApp / Skype We can arrange all customs and registration formalities for an additional fee. We can also deliver vehicles to the port for an additional fee.

Condition: used, Year of construction: 2000, operating hours: 6,750 h, functionality: fully functional, machine/vehicle number: 309661, Offered for sale is an eccentric press Manufacturer: SCHULER / Römer GmbH Type: PN 63-250 Rated force: 630 kN Ram stroke: 8–100 mm Stroke rate: 140 strokes/min Two-hand and foot operation Separate control cabinet Used, fully functional condition. Collection by the buyer; assistance with dismantling/transport can be arranged if required. If interested or if you have any questions, please feel free to send me a message. On-site inspection by appointment is possible. Further metalworking machinery such as bench drilling machines, press brakes, pillar drills, eccentric presses, heavy-duty shelving, welding tables, MIG/MAG welding machines, compressors, etc. – please see my other listings. Hsdpfexvqmkox Ahuong Collection only – dismantling and transport by the buyer or by arrangement. If you are interested or have questions, feel free to send me a message. Further photos and technical details available on request. All information subject to change and without guarantee. Errors and prior sale reserved. Nous parlons Français / Мы говорим по-русски We speak English / Noi vorbim românește Viber / WhatsApp We handle all customs and registration matters for a fee. We can deliver vehicles to the port for an additional charge.

Condition: used, Year of construction: 2008, pressure 63 t throat ca. 280 mm stroke 8-100 mm no. of strokes 60-130 Hub/min ram - range of adjustment 80 mm Hodpsxu Nw Ssfx Ahuong weight of the machine ca. 4,3 t

Condition: used, Year of construction: 1969, Technical details: pressure: 55 t throat: 250 mm Hsdpfx Ahexu Dwmeuong no. of strokes: 120 Hub/min daylight dimension : table/slide up: 380 mm ram adjustment: 55 mm sheet thickness continuous stroke : 2,25 mm ram stroke range: 6 - 90 mm total power requirement: 8,8 kW weight of the machine approx.: 2,75 t dimensions L x W x H: 1,4 x 1,2 x 2,2 m

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, We are offering a beautiful eccentric press from Schuler/Beutler Nova AG, model CFL63c C-frame. The machine is under power, ready for demonstration and can be tested on site. It is suitable for both safeguarded and non-safeguarded tools. Technical data and information: Year of manufacture: 2020 Control system: CCS/PNOZmulti Hnodpfext Nxtex Ahuog Rated power: 4 kW Rated force: 630 kN Working energy (J): 2750 Max. strokes in continuous operation (min-1): 30 - 120 Max. strokes in single stroke mode (min-1): 60 Table dimensions: 820 x 590 mm Ram dimensions, max. tool size: 470 x 415 mm Ram bore Ø: 50 mm Max. weight of upper tool (kg): 200

Condition: new, Year of construction: 2025, functionality: fully functional, table width: 850 mm, table length: 570 mm, total width: 1,265 mm, overall weight: 5,500 kg, pressing force: 60 t, C-frame eccentric press 60 t. NEW Press force: 60 t Rated capacity point: 4 mm Max. closed die height: 310 mm Stroke adjustment (semi-automatic): 20/100 mm Speed: 60 SPM Die fastening hole diameter: 50 mm Throat depth (centre of hole to back): 275 mm Ram stroke adjustment: 80 mm Hnodpfxsxtplte Ahueg Ram dimensions: 580 x 350 mm Table dimensions: 850 x 570 mm Table hole diameter: 150 mm Table height above floor: 795 mm Weight approx. 5,000 kg Height: 2,430 mm Depth: 1,370 mm Width: 1,265 mm Motor: 5.5 kW

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 65/2/158/02, throat depth: 280 mm, table length: 580 mm, total width: 820 mm, pressing force: 65 t, stroke length: 120 mm, punching force: 65 t, Used 65ton mechanical power press for sale Video at the bottom of this listing MODEL 65 CNR 4 SERIAL N° 65/2/158/02 NOMINAL FORCE (Max stroke) 650 [ KN] Hsdpfx Aexqn Unehujng MACHINE WEIGHT 5000 [ daN] NOMINAL SPEED 73 [ C/min ] VARIABLE SPEED MIN/MAX [ C/min ] MAXIMUM CLUTCH ENGAGEMENTS 36 [ C/min ] CLUTCH PRESSURE MIN/MAX 4 / 5,5 [ bar) MAXIMUM STOPPING TIME 0,154 SAFETY DISTANCE 246 [ mm ] FLYWHEEL ENERGY 3440 [ KJ] STROKE LENGTH MIN/MAX 10 / 120 [ mm ] RAM ADJUSTMENT 100 [ mm ] SHUT HEIGHT S.D.A.U. 320 [ mm ] MAXIMUM EJECTOR STROKE 40 [ mm] TABLE SIZE 68 / 580 / 820 [ mm ] RAM SIZE 340/ 470 [mm] TOOL SPIGOT DIA 45 [ mm ] THROAT DEPTH 280 [ mm ] MAX TOOL SIZE 340 / 470 [ mm ] MAX TOP TOOL WEIGHT 136 [ daN]

Condition: ready for operation (used), Eccentric Press Machine, AUG. RUHRMANN E100R, Used Machine Manufacturer: AUG. RUHRMANN Maschinenfabrik GmbH & Co. KG Type: E100R Serial Number: 14339 Year of Manufacture: 1997 Technical Data Nominal pressing force: 1000 kN (100 tons) Stroke length: 20 – 130 mm Max. installation height (at bottom dead center): 580 mm Stroke adjustment: max. 100 mm Max. flywheel speed: 230 1/min Number of strokes in continuous operation: 60 1/min Max. clutch engagements: 16 1/min Hnodjxnqrdjpfx Ahusg Standard crankshaft stop point: 15° after B.D.C. Max. tool size: 580 × 380 mm Max. tool part weight: 70 kg Operating pressure of clutch system: 6 bar Compressed air connection: 6 – 8 bar Total drive power: 7.5 kW Safety distance: 345 mm Overrun time: 215 ms Table size: 1100 × 660 mm Operating hours: 70,797 Overall dimensions Width: 2000 mm Depth: 1700 mm Height: 3020 mm Weight (without tools and accessories): 7000 kg

Condition: excellent (used), Machine type: Eccentric press / high-speed punch press. Hnedpfx Asxm S E Nohuog Nominal pressing force: 62–63 t. Stroke frequency: 65–110 strokes/min. Application (original): production line for L-type staples (length 4–50 mm) Condition: used, operational / in use; ready for testing by arrangement Availability: immediately available.