Wenk Schweisstechnik GmbH

Condition: excellent (used), pneumatically operated, water-cooled spot welding gun Manufacturer: DALEX, Type 3328-4 with 5/2 solenoid valve – double-stroke cylinder, long stroke 60 mm, pre-stroke 40 mm Working stroke with adjustable range 0–20 mm Rated power at 50% duty cycle: 25 kVA Secondary short-circuit current: 16.5 kA Lredpfx Aexywt Esgmow Secondary open-circuit voltage: 4.7 V Electrode force: 280 daN Arm spacing: 140 mm Arm reach: 500 mm with cardan suspension and suspension bracket 10 m connection cable and control line inclusive: auxiliary welding controller MPS 15036 with main switch according to VDE 0/100

Condition: refurbished (used), Year of construction: 2025, Power at 50%: 50kVA Short circuit-current: 19kA Electrode force: 470daN / single stroke Throat depth: 250mm --- Weld control: Digit 8 --- Warranty: 6 months --- Lodpfx Agoxyqn Aemsrw Spotwelding electrodes + spare parts at stock

Condition: new, Year of construction: 2025, nominal power at 50% duty cycle: 20 kVA, – Capacity 20 kVA – Pneumatic – Extension 450 mm Lredpfx Aexyl Hgogmjw – Control PX1700ECO – Documentation – 400V

Condition: new, Year of construction: 2025, nominal power at 50% duty cycle: 35 kVA, – Capacity 35 kVA Lodpfjxyl Hasx Agmerw – Pneumatic – Extension 450 mm – Control PX1700ECO – Documentation – 400V

Condition: excellent (used), Parallel-guided, water-cooled table spot welding machine Manufacturer: DALEX, Model: PMS 10-4 T With single-acting cylinder Throat depth: 350 mm Rated power at 50% duty cycle: 32 kVA Secondary short-circuit current: 38.3 kA Secondary open-circuit voltage: 2.3 - 4.6 V Electrode force: 65-390 daN Lsdpfx Aoxxaz Nsgmorw 8-step selector switch Foot pedal Machine table with CrNi stainless steel shelf External controller MPS 200 Operating manual in German

Condition: like new (used), water-cooled, pneumatically actuated spot welding gun with 5/2 solenoid valve Make: DALEX Type: 3228-4 Rated power at 50% duty cycle: 16 kVA Secondary short-circuit current: 13.5 kA Electrode force: 270 daN Arm spacing: 130 mm Arm reach: 350 mm With double stroke cylinder Long stroke: 75 mm Pre-stroke: 50 mm Working stroke with adjustable height: 0-25 mm Cardan suspension and suspension bracket 10 m connection cable and control cable Lrodpoxwlzlofx Agmow Includes: External welding controller MPS 15033 The spot welding gun shows hardly any signs of use and is in like-new condition.

Condition: excellent (used), Water-cooled, pneumatically operated rocker arm spot welding machine Manufacturer: DALEX Model: SL 25-1 Rated power at 50% duty cycle: 25 kVA Secondary short-circuit current: 22.4 kA Secondary open-circuit voltage: 1.8 - 5.2 V Electrode force: 278 daN Arm gap: 140 or 300 mm Arm reach: 180-500 mm Lrjdpfx Asxvh Hbegmow With attached control cabinet according to VDE 0100 With main switch Synchronous welding control MPS 15036

Condition: excellent (used), Year of construction: 1991, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 910177, type of input current: AC, throat depth: 400 mm, nominal power at 50% duty cycle: 15 kVA, input voltage: 380 V, type of cooling: water, overall weight: 120 kg, welding power (max.): 31 kVA, total width: 300 mm, total height: 1,250 mm, total length: 900 mm, stroke length: 35 mm, electrical fuse: 25 A, sheet thickness steel (max.): 3 mm, sheet thickness aluminum (max.): 3 mm, sheet thickness brass (max.): 2 mm, Spot Welding Machine KLT 116 CEA Costruzioni Elettromeccaniche Annettoni S.p.A. (Italy) Rated power at 50% duty cycle: 15 kVA Maximum welding power: 30.6 kVA Secondary short-circuit current: 11.4 kA Maximum sheet thickness steel: 3 + 3 mm Maximum sheet thickness aluminium: 3 + 3 mm Maximum sheet thickness brass: 2 + 2 mm Adjustable welding time and current Maximum welding time: 2 seconds Electrode stroke: 35 mm Electrode holder: Ø 21 mm Ljdpfx Aexuh Upjgmorw Electrodes: Ø 16 mm, taper mounting 1:10 Throat depth: 400 mm Lower arm height adjustable Arm spacing: 162-415 mm Arm diameter: Ø 40 mm Foot pedal, mechanical Electrode force: adjustable, max. 160 daN Mains connection: 3-phase 400 V / 25 A Water cooling connection prepared (3 l/min at 3 bar) 15 electrodes and 3 mounting blocks included Machine weight: 120 kg Width: 300 mm Length: 900 mm Height: 1250 mm

Condition: excellent (used), operating hours: 100 h, functionality: fully functional, type of input current: AC, controller manufacturer: Formigine, power: 4 kW (5.44 HP), control type: manual, degree of automation: manual, actuation type: hydraulic, Equipment: documentation/manual, BTH Tech stud welding machine with extensive accessories / spare parts and aluminium welding studs Lodpfsxt Iz Tsx Agmorw

Condition: used, Year of construction: 2012, manufacture NIMAK Lrodpfsxrg Ebox Agmsw electric cabinet Rexroth - Bosch Group dimension div. verfügbar In our opinion, the machine is in good used condition Condition and can be viewed by appointment. Welding tons Technical features: - including control unit There are around 150 different welding tons available. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: excellent (used), functionality: fully functional, WMA WMP 08 Spot Welders in TOP Condition, The unit shows barely any signs of use and has only been operated very occasionally. Air-cooled one-handed spot welding unit for vehicle manufacturing, tank construction, steel cabinet fabrication, sheet metal processing, and the wire industry. - Trouble-free welding of all sheet metals - Galvanized sheets can be welded perfectly thanks to controlled current rise and fall - Air-cooled, equipped for external water cooling - Tools can be easily changed using standardized rotating connectors - Only one plug required for welding current, control cable, and water cooling - Always reproducible welding results thanks to built-in automatic energy control Microprocessor Thyristor Control - Constant current regulation - Continuous process monitoring - Simple and ergonomic operation - All set parameters and process values are visible at a glance - Changes to welding parameters allowed only for authorized personnel - Management of configuration and program settings possible via a central PC WMA WMS 108 Microprocessor Thyristor Control - 7 time settings - 8 program slots - Built-in controller - Automatic mains frequency detection 50/60 Hz - Power outage-proof parameter storage - 'with/without current' toggle at the press of a button Additional configuration parameters (locked for user): - Program selection - Advance contact - Advance contact time - Two-hand lock (check) - Locking start signal - Current flow control - Response threshold - Current flow monitoring - Monitoring time - Current flow control - Power factor adjustment - Delay first half wave External inputs (24V, DC stabilized and switching): - Thermal switch - Thyristor temperature - EMERGENCY STOP - Start 1 Ledoxrb Tgjpfx Agmsrw - Start 2* - Pressure contact - Program 1* - Program 2* - Pre-stroke ON - Program interruption after hold time (only force) - Two-hand lock (check)* * These functions can be activated or locked via configuration parameters. External outputs (24V, DC unstable ± 20%; + switching, max. 5 W): - Solenoid valve pre-stroke - Solenoid valve welding - Relay advance contact - Relay ready for operation Dispatch via freight carrier possible upon prior arrangement. #8407

Condition: used, Spot Welding Machine SCIAKY type S0 432 NT Capacity: from 0,5 to 6 mm thick Lrjdpfx Asxnk Tnogmjw Throat depth: 380 mm Arm spacing: from 190 to 340 mm Arm Length: de 250 à 500 mm Pressure: 6 bars Voltage: 380 V Width: 1100 mm Depth: 500 mm Total height: 1500 mm Weight: approx 500 KG

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Hib Akzent 1000 Model T1060-8 Welding Tongs Control Very good used condition, fully functional. Item location: 75053 Gondelsheim See pictures Shipping by freight carrier or collection Lredpoxmuzmjfx Agmjw

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Water-cooled, pneumatically operated spot welding tongs Nimak L123 Very good used condition, fully functional. Item location is 75053 Gondelsheim See pictures Lrsdpfx Agoxmuyvsmjw Shipping via freight forwarder or collection

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Water-cooled, pneumatic spot welding tong Nimak L193 TB. Very good used condition, fully functional. Item located in 75053 Gondelsheim. See photos. Shipping by forwarding agent or collection. Lrjdpfsxmuypox Agmsw

Condition: refurbished (used), Power at 50%: 20kVA Short circuit-current: 19kA Electrode force: 187daN / single stroke Throat depth: 160mm --- Weld control: TE 91 (12-times, 2-program) --- Warranty: 12 months --- Lrjdpsxl U Auefx Agmjw Spotwelding electrodes + spare parts at stock

Condition: refurbished (used), Year of construction: 2025, Power at 50%: 80kVA Short circuit-current: 35kA Electrode force: 100-600daN / single stroke Throat depth: 350-650mm --- Weld control: MPS 200 (8-times, 4-program) --- Lodpfsxl Uv Ujx Agmsrw Extra Equipment: - doppel foot pedal "currentless contact --- Warranty: 6 months --- Spotwelding electrodes + spare parts at stock

Condition: new, Year of construction: 2025, Power at 50%: 80kVA Short circuit-current: 35kA Electrode force: 100-600daN / single stroke Throat depth: 350-650mm --- Weld control: MPS 10beta (5-times, 8-program) --- Warranty: 12 months Lrsdpfxsxl Uudo Agmow --- Spotwelding electrodes + spare parts at stock

Condition: new, Year of construction: 2025, Power at 50%: 100kVA Short circuit-current: 41,5kA Electrode force: 100-600daN / double stroke Throat depth: 350-650mm --- Weld control: MPS 10beta (5-times, 8-program) Lodpfxsxl Ur Aj Agmjrw --- Warranty: 12 months --- Spotwelding electrodes + spare parts at stock

Condition: new, Year of construction: 2025, Power at 50%: 40kVA Short circuit-current: 26,2kA Electrode force: 100-600daN / single stroke Throat depth: 250-550mm --- Weld control: MPS 10 (5-times, 8-program) Ledpfx Aoxl Urcegmorw --- Extra Equipment: - doppel foot pedal "currentless contact" - forearm support --- Warranty: 12 months --- Spotwelding electrodes + spare parts at stock

Condition: new, Year of construction: 2025, Power rating at 50%: 2,5kVA Lredjxl Uqxepfx Agmjw Short-circuit current: 8,2kA Electrode force: 120daN (at 125mm Throat depth) weight: 11kg --- with Electrode arm 125mm --- welding control --- warranty: 12 months

Condition: good (used), - Capacity 100 kVA - Pneumatic - Throat depth 570 mm - 380 V Ledpfx Agexk Tavsmjrw

Condition: good (used), – Capacity 15 kVA – Pneumatic – Throat depth 350 mm – Control TE 90 Mark II – Cooling unit Ledpfxsxgb Ado Agmerw – Documentation – 400V

Condition: excellent (used), Water-cooled, pneumatically operated spot welding gun Fanikat DALEX Type A 3139-S3 Rated power at 50% duty cycle: 8 kVA Secondary short-circuit current: 9.5 kA Electrode force: 300 daN Arm spacing: 120 mm Arm reach: 250 mm With double-stroke mechanism – long stroke 52 mm – short stroke 27 mm Mains voltage: 400 V 50 Hz Protection: 16 A Mounted on a mobile ergonomic handling system KAROSTAR Weightless operation – length and height adjustable via articulated joints With cooling unit and integrated synchronous control unit R15 Z From a training facility Very good condition Lredpfxjxfrv Ss Agmsw Extensive range of water-cooled electrode arms available

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Water-cooled, pneumatic spot welding tongs Dalex 3139 S2 + Dalex controller RS15 + Hyfra recirculating chiller / water cooling VWK7/1 Complete set including hose package approx. 10 m and spring balancer, without CRANE!!! Very good used condition, fully functional. Item location: 75053 Gondelsheim See pictures Lrodpjxdvl Ijfx Agmow Shipping via freight forwarder or pickup