Schreinerei Sponsel

Condition: used, Year of construction: 2013, machine/vehicle number: A1312006-0030, - Manufacturer Venjakob - Type VEN DRY OIR 38/40 - Year of construction 2013 - Working width 1,300 mm - Working height 940 + - 20 mm - Length of exhaust duct 3,800 mm - Supply air capacity 100 m³/h - Exhaust air capacity ~ 500- 1000 m³/h - Recirculated air capacity ~ 3,000 m³/h - Max. Drying temperature ~ 30 degrees - Air velocity 0.5 - 2 m/s - IR emitters 12 pcs. - IR heater output 12 x 1.5 kW - Belt conveyor, length 4.000 mm - Location, at the warehouse Gjdpfxsxfkbao Afpokc - Volt, Hz 400/50 - Voltage fluctuations max. +/- 5 % - Control cabinet with touch screen display

Condition: used, Year of construction: 2006, machine/vehicle number: A 06 06 010/ 0300, Flash off dryer VEN DRY OIR Venjakob - Producer Venjakob - Type VEN DRY OIR 38/40 Godpexfi Ixofx Afpjkc - Year of construction 2006 - Working width 1.300 mm - Working height 940 + - 20 mm - Length of flash off tunnel 3.800 mm - Fresh air 100 m³/h - Exit air ~ 500 - 1000 m³/h - Circulation air ~ 3.000 m³/h - Drying temperature ~ 30 Grad - Air speed 0,5 - 2 m/s - IR-tube emitter 12 Stk. - Power IR tube emitter 12 x 1,5 kW - Transport belttransport - Length 4.000 mm - Location, in stock - Voltage / HZ 400/50 - Voltage fluctuation max. +/- 5 % - control cabinet with Touch-Screen

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, working width: 1,300 mm, transport length: 7,500 mm, volume flow: 40,000 m³/h, total length: 7,500 mm, FEV E: LAMINAR AIR DRYER (ECOGEL E4/5) Type: SP-FEV E Heating medium - Electric power Installed electrical power: approx. 100 kW Gjdpfx Afew H Aw Sepjkc The in-line hot air dryer is suitable for rapid evaporation and curing processes. This dryer is equipped with a laminar hot air flow in the opposite direction to the feed and features adjustable recirculation. Total length: 7,500 mm Working width: 1,300 mm Overall width: 1,783 mm Max. drying height: 1,780 mm (excluding conveyor) Usable passage height: 80 mm Solvent-laden exhaust air discharged outside: 0-4,000 m³/h Autonomous electrical control cabinet Machine control via 5.7" LCD touch panel for complete management of operating parameters Option to store and retrieve recipes VS spark-proof supply/recirculation fan: Power: 2.2 kW; Flow rate: 40,000 m³/h; Outlet electrical power: 1.5 kW; Supply air into workspace: 0-4,000 m³/h; Installed heating capacity: 76,400 kcal/h (heating coil 90 kW) (Technical data subject to change and errors excepted. Prior sale reserved.)

Condition: used, Year of construction: 2005, robot equipped with 12 spray guns (3 independent gun lines) 3 pumps, including 2 high-pressure pumps for varnish, lacquer or paint (pumps for water-based varnish) 1 pump for stain 1 unpacking tunnel for water-based varnish 1 percussion tunnel Gkodpow Dfk Nefx Afpsc 1 UV tunnel with 3 lamps (including gallium and mercury)

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Motorized infeed conveyor, anti-static module, spray robot with 2 guns, side ramp, outfeed conveyor, 6-level drying tunnel 1300 x 4500 mm, high-pressure pump for varnish/lacquer or water-based paint. Gkjdpfxow Dfi So Afpsc

Condition: excellent (used), Year of construction: 2015, I sell the 2-head 2-lamp UV-drying tunnel oven Burkle TRUV 1300 Year 2015 Working width 1300mm. Total length 2,80m + 3,00m Godsw Anclepfx Afpskc Total power 36,6kW 2 Lamps GA 120 W + HG 120 W Very good condition, available immediately.

Condition: used, Year of construction: 2007, UV dryer, Cefla UV 2000 - Manufacturer Cefla/Sorbini - Type UV 2000 M2 / TTE2500 Gkjdpfewvu Ibsx Afpjc - Year of manufacture 2007 - Working width 1,300 mm (1,445) mm - Working height 900 + - 40 mm - Control panel on the right - Max. part height 70 mm - Number of tubes from above 2 - Tubes positioned straight 2 - Suitable for mercury tubes - Suitable for gallium tubes - Tube power max. 120 W/cm - Bar transport - Length 2,500 mm - Width 2,300 mm - Height 1,500 mm - Volts, Hz 400 /50 - Total electrical connection 86 A / 36.4 kW - Voltage fluctuations max. +/- 5% Images are only examples of a machine of the same design*

Condition: used, Year of construction: 2008, Infrared dryer, consisting of: Module 1: - 3 IRM lamps with a power of 3500 watts/lamp - Structure made of painted sheet metal. - Installed electrical power 10.5 kW Module 2: - 2 IRM lamps with a power output of 3,500 watts/lamp - Structure made of painted sheet metal. - Installed electrical power 7.0 kWTotal connection approx. 19.5 kW/400 V/50 HzExhaust air: - Exhaust air fan approx. 1,800 m³/h - Supply air/room air approx. 1,800 m³/h - Extraction nozzle D160mm Gkjdpfx Afjwub Uxopoc ROLLER CONVEYOR - Celfa - Year of manufacture 2008 - Steel rollers with heat protection tape wrapped around - Roller spacing 160 mm - Feed via hand wheel adjustment - Installation length 2,000 mm - Feed approx. 3 - 7.5 m/min. - Including control cabinet - 400V/50Hz

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: SLM06EC01-R1, workpiece weight (max.): 5,000 kg, This Performa Roller configuration features an entry and exit conveyor belt system and a system of rollers which feed workpieces through the spraying zone. It is equipped with 8 spray guns subdivided into 2 product circuits and a dry filtration system. It has a working width of 300 mm and is perfect for applying water and solvent-based stains and paints. 01. Performa 28 Belt has a continuous conveyor belt system for transporting workpieces and a paint recovery system. It is equipped with 8 spray guns subdivided into 2 product circuits and dry filtration. It has a working width of 240 mm and is also available in the 400 mm version. Perfect for applying water and solvent-based stains and paints.ž 02. This configuration is the ideal solution for applying 100% acrylic products. It is equipped with a continuous conveyor belt system, steel filters and a patented paint recovery system. Equipped with 6 spray guns on a single product circuit. It has a working width of 240 mm. Gkodpjwrra Tsfx Afpjc 03. Performa Roller: roller conveyor system; working width 300 mm Performa Belt: conveyor belt system; working width 240 mm or 400 mm Performa UV Belt: for application of 100% acrylic products; conveyor belt system; working width 240 mm; patented recovery system

Condition: used, Drying oven with ultraviolet lamp for roller coating line Max working width 1300 mm Max workable thickness 40 mm Drying system with 2 UV lamps Transport system with motorized rods Separate electrical cabinet Gsdpfx Aewq Subofpekc

Condition: new, Cefla painting system Gjdpewhbrwjfx Afpskc

Condition: ready for operation (used), Year of construction: 1998, Brand: Superfici Type: TU166-20+1UVM55 Machine no: 4632 Gjdpewaydpefx Afpekc Year: 1998 Max. width 1300 mm Number of lamps 1+3 Control cabinet. Stock no: 2002484BXM

Condition: ready for operation (used), Year of construction: 1998, Brand: Superfici Type: TU166-20+1UVM55 Machine no: 4632 Year: 1998 Gjdpewax Tpsfx Afpjkc Max. width 1300 mm Number of lamps 1+3 Control cabinet. Stock no: 2002484BXM

Condition: excellent (used), Year of construction: 2010, I sell the 1-head 1-lamp UV-drying tunnel Burkle TRUV 1300 Year 2010 Working width 1300mm. Total length 2,00m Total power 18,7kW 1 Lamp GA 120 W Gedpfsvxa T Aex Afpokc Very good condition, available immediately.

Condition: used, Year of construction: 2008, - Producer Efsen/Cefla - Type Woodcure 1400 - Year of construction UV 2008, Transport/Conveyor 1998 - Working width 1.300 mm (1.445) mm - Working height 870 + - 20 mm - Max. part height 70 mm - Number of lamp from top 2 Stk. - Lamp straight to conveyor 2 Stk. - For mercury lamps - For gallium lamps - Electic capacity lamp 120 W/cm - Length cross bar conveyor - Cross-bar pitch 95 mm Gjdovupdcjpfx Afpokc - Producer transport system Cefla - Feed speed infinitely adjustable by hand wheel ~ 5-25 m/min - Width 3.500 mm - Voltage / HZ 400 /50 - Elektrischer Total connection 38 kW - Voltage fluctuation max. +/- 5 %

Condition: used, for installation on an existing bar conveyor scope of delivery: Housing of the tube with exhaust fan and switch cabinet without cross bar conveyor - Producer Cefla - Type ECO LIGHT - Working width 1.300 mm - Number of lamp from top 1 Stk. - Lamp straight to conveyor - For mercury lamps Gjdpfxovun Uye Afpekc - For gallium lamps - Mirror pivoting - Total connection power 14,61 kW - Location - Voltage / HZ 400 / 50

Condition: used, Year of construction: 2010, Infrared drying system Schiele IR dryer (HIR stationary dryer) Including 20 trolleys for quick drying of workpieces on trolleys with infrared radiators and blowers. Temporary special price. Fixed price. Hordes: 20 pcs length: 7.000 mm width: 2.500 mm Gkjdpevlxm Iofx Afpec Technical specifications: See PDF

Condition: used, Year of construction: 2007, with light barriers in the inlet area, the dryer only switches on when parts are detected by the light barrier, otherwise the dryer is in energy-savingstandby mode with almost closed mirror halves. Operation via a Siemens panel. - Manufacturer: Venjakob - Type: VEN DRY UV 3D - Year of manufacture: 2007 - Operating side: right - Working width: 1.300mm - Max. Part height: approx. 100mm - Number of tubes: 2 pieces - Suitable for mercury and gallium tubes - 3D for edge drying - Tube power max. 120W/cm - Tube power infinitely adjustable 50-120Watt/cm - With standby mode- With belt conveyor Gksdpfx Afju S N R Espec - Feed rate: ~ 2.5 - 7.5m/min. - Length: 3,000mm - Bretie: 2.750mm - Total connection ~45KW - Location: in stock - Volt/HZ: 400/50

Condition: used, Year of construction: 2012, - Manufacturer Venjakob - Year of construction 2012 - Working width 1.300mm - Type. Flash off dryer, VEN DRY Flash Off - Part height max. approx. 120mm - Zone1, paint calming zone with cover hood without air 3,000+300mm - Zone2, flash off zone 10,000mm - Laminar flow dryer in the opposite direction to the parts - Supply air 4,000m³/h - Exhaust air 4.000m³/h - Air volumes adjustable via flaps - Heat output approx. 65 kW - Air speed 2-5m/s - Max. Drying temperature 30°C - Heat exchanger, heating water PWW max. 90/70 degrees - Belt conveyor, length 13,800 mm - Feed speed approx. 2-10m/min, Frequency converter required on site. - Volt, Hz 400 / 50 Gksdpfju Edhuex Afpoc - Motor power 2.5+1.5+0.75KW - Without switch cabinet - Location, at the Blomberg warehouse

Condition: used, Year of construction: 2016, machine/vehicle number: 9960-10-1059, techncal data: - Producer: Printworld - Type. 3D - PUVD 1300 - Working width: max. 1.300 mm - UV-lamp length: 2 x 1.600 mm arc length - Curing systems: 2 pcs of curing systems from top + 1 pcs curing system from down under Godpfx Aju Abn Tefpjkc - UV- power regulation: UV- lamps are able to be individually controlled (30% -100%) - Reflector: Printworld Multifocal –Reflector - Conveyor transport width: 1.400 mm - Total lengths: 4,5 m - Conveyor speed: 3 – 20 m/min - Substrate passage height: 60 mm, max. (option higher) - Execution conveyor belt: PTFE Fiberglass mesh conveyor belt, anti-static coated - Conveyor speed regulation: Infinitely variable with digital control and monitoring - Conveyor adjustment: Conveyor belt guiding system - Conveyor belt drive: Stepper motor with variable speed conveyor belt and digital - control and monitoring - UV radiation protection: Built in on the machine frame - Energy Saving: Automatic standby circuit with power reduction about 10% - Operation / control: Schneider Modicon M258 Logic Controller processor with Magelis colour touch screen - Inlet height: 850 – 900 mm or by appointment) - Outlet height: 850 – 900 mm (or by appointment) - Electrical connection: 400V~, 50 Hz, 3- Phases +N +PE - Current 135A - Location: on stock

Condition: used, for installation on an existing bar conveyor. Includes: casing with 2 tubes, exhaust fan and control cabinet. Without conveyor Gksdpjumvqcjfx Afpec

Condition: used, Year of construction: 1998, machine/vehicle number: 71257/1, - Producer Cefla/Sorbini - Type Ecolight - Year of construction 1998 Gkedpsumvp Eefx Afpoc - Working width 1,300 mm - working height 870 + - 20 mm - max. part height ~ 70 mm - Number of tubes from above 1 pc. - Tubes placed straight 1 pc. - Suitable for mercury tubes - Suitable for gallium tubes - Bar transport - Rod pitch ~ 95 mm - Feed adjustable 5 - 25 m/min - Length 1,500 mm + 500 mm - Volt,Hz 400 /50 - Total electrical connection 12.56 kW - Voltage fluctuations max. +/- 5 %

Condition: used, machine/vehicle number: 3281, - Producer Elmag Superfici - Working width 1300 mm - Number of lamp from top 2 Stk. - Lamp straight to conveyor 2 Stk. - For mercury lamps - For gallium lamps - Electic capacity lamp 80 W/cm Gksdpfoumvmksx Afpec - Selective shiftable 80 / 40 W/cm - Feed speed infinitely adjustable by hand wheel ~ 2 - 7,5 m/min - Location - Voltage / HZ 400 / 50 - Commodity code 8419 3200

Condition: used, Year of construction: 2008, - Producer Printworld - Type PUVD 1600-2 - Year of construction 2008 - Working width 1.600 mm - Working height 1.030-1.050 mm - Max. part height 25 mm - Operationside left - Number of lamp from top 2 Stk. - For mercury lamps - For gallium lamps - Electic capacity lamp 120 W/cm - Selective shiftable 60 / 90 / 120 W/cm - Conveyor with netbelt Gksdpfxeumvkco Afpec - Feed speed adjustable 2 - 50 m/min - Installation length 3.300 mm - Machine measure 3,3 x 2,5 x 1,8 m - Location - Voltage / HZ 400 / 50

Condition: good (used), Superfici MV40 1300m/m wide Double Roller Coating machine, complete with 2 UV Quick Drying Lamps. In good working condition. Location to view : Burrowbridge, Somerset. TA7 0SG UK. Gjdpfot Uqy Ujx Afpokc Price ex works: £3,000.00 + Vat or 3600.00 Euro Price includes loading buyers transport. Photos available on WhatsApp.