Wolfgang Kreher

Condition: excellent (used), functionality: fully functional, Weiler Matador VS-2 lathe with lead screw and tailstock, equipped with a 3-axis digital display from Heidenhain ND 780, from a training workshop!! Technical data: >> Machine No. 7702, year of manufacture approx. 1990 >> Center height 140 mm >> Center distance 500 mm >> Speed: 15 – 3550 RPM >> Spindle bore 36 mm >> Short taper spindle head DIN 55022-5 with bayonet fitting >> Tailstock MK 3 >> Feeds from 0.012 to 0.9 mm/rev >> Possible threads: metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 12 mm >> Brake motor >> Weight approx. 700 kg >> Length 1.4 m, height 1.2 m, depth 0.55 m Accessories and equipment: >> 3-axis digital display Heidenhain ND 780 Kedpfx Aksy T Hqcexolt >> Quick-change tool holder, internal and external collets (see picture) >> 1 three-jaw chuck, 3 sets of jaws >> Mulifix size A with 3 steel holders >> Spindle guard >> 1 bed stop >> Change gears >> Machine feet About the machine: Offered is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. Even at high speeds, the Weiler runs quietly. The original location of the Weiler was a training workshop. The machine is equipped with a wide range of accessories. Take the opportunity to inspect this machine on-site while it is powered up and to convince yourself of its very good condition.

Condition: good (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 109640, spindle bore: 82 mm, center height: 330 mm, quill diameter: 75 mm, quill travel distance: 150 mm, total length: 4,200 mm, total width: 1,050 mm, total height: 1,350 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 9 rpm, overall weight: 3,300 kg, torque: 1,500 Nm, KNUTH SINUS 330/3000 Guide and Lead Screw Lathe - Power: 8 kW - Voltage: 400 V - Frequency: 50 Hz - Incl. ACU-RITE digital display - Incl. tailstock, Multifix base, and three-jaw chuck, diameter: approx. 310 mm - Center height: 330 mm - Distance between centers: 3000 mm - Center height in the offset: 435 mm - Length of the bridge: 240 mm - Top slide travel: 145 mm - Cross slide travel: 310 mm Kjdpfx Akey Twn Eoxolt - Tool dimensions: 25 x 25 mm - Tailstock taper: MK 5 Note: The item must be collected on a date to be determined between July 14th and 16th, 2026. FCA D-45883 Gelsenkirchen - loaded onto a truck.

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Weiler Matador VS-2 lathe with lead screw and tailstock, featuring a 3-axis digital display from Elesta, from a training workshop!! Technical data: >> Machine no. 88-8115, year of manufacture 1988 >> Center height 140 mm >> Center distance 500 mm >> Speed: 15 – 3550 RPM >> Spindle bore 36 mm >> Short taper spindle head DIN 55022-5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.012 to 0.9 mm/rev Kedpfx Akjy Tmkvjxjlt >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 12 mm >> Brake motor >> Weight approx. 700 kg >> Length 1.4 m, height 1.2 m, depth 0.55 m Accessories and equipment: >> 3-axis digital display Elesta >> Quick-change tool post, internal and external collets (see picture) >> 1 three-jaw chuck, 1 set of jaws >> Mulifix size A with 3 steel holders >> Spindle guard >> 1 bed stop >> Change gears >> Follow rest >> Machine feet About the machine: A Weiler Matador VS-2 in very good condition is offered for sale. The machine is fully functional. The slides all move smoothly and evenly. Even at high speeds, the Weiler runs smoothly. The original location of the Weiler was a training workshop. The machine is equipped with a wide range of accessories. Take the opportunity to inspect this machine on-site while it is powered up and to convince yourself of its very good condition.

Condition: excellent (used), Year of construction: 2017, Weiler Primus VCD (2017) Precision Lathe Kjdpfx Akoy Ti Ikoxslt Manufacturer: Weiler Model: Primus VCD Precision Lathe Year of manufacture: 2017 Condition: used, very good, as new, recently serviced according to factory specifications with acceptance protocol Scope of delivery: - Documentation

Condition: ready for operation (used), functionality: fully functional, Includes collet set, 2-axis Heidenhain digital readout, Multifix tool holder. Ksdsy S Swrspfx Akxelt

Condition: used, functionality: fully functional, center height: 220 mm, Parallel lathe HARRISON 1000 x 220 Model: M 400 Spindle bore: 65 mm Used machine Internal code: SVR 395 Kledpjy R Dkujfx Akxot

Condition: good (used), Lathe Angelini MAS 160 (similar to Weiler Primus) Kedpfx Akey Ryrhexolt Spindle speeds: 45-2840 rpm Three-jaw chuck: 140 mm Spindle bore approx. 35 mm Tailstock MK3 Distance between centers: 500 mm Center height approx. 140 mm Coolant system 2 tool holders and various accessories (blue box) The machine has been inspected and runs perfectly

Condition: good (used), Year of construction: 1992, Centre lathe WEILER Type: PRAKTIKANT 160 B, Year of manufacture 1992, equipped with 3-axis digital readout Heidenhain, 160 mm RÖHM chuck, Multifix B tool holder, tailstock with centre, collet clamping device with collets from 1 to 29.5 mm, coolant system. Turning diameter over bed: 320 mm Turning diameter over cross slide: 198 mm Turning length: 650 mm Spindle bore: 40 mm Spindle speed: 96 – 2500 rpm Kledpfoy Rpr Rsx Akxet Further data see machine card. Guideways are in good condition, machine documentation available.

Condition: used, Year of construction: 2002, Technical details: turning diameter over bed: 330 mm turning diameter over support: - mm turning length: 3000 mm centre height: 330 mm spindle bore of work spindle: 82 mm range of revolution per miute: 9 - 1600 U/min feed range: 0,028 - 6,43 mm/U tailstock quill adjustment:: 150 mm Kodpfx Aksy Rk S Eoxjlt tailstock taper MT: MK5 total power requirement: 7,84 kW weight of the machine ca.: 2,9 t dimension machine xH: 4,13 x 1,05 x 1,35 m

Condition: used, MYFORD MG 12 HM UNIVERSAL CYLINDRICAL GRINDING MACHINE MAKE MYFORD, MADE IN ENGLAND MODEL MG 12 HM YEAR MID 90s SWING 127.0 mm LENGTH 305.0 mm PLUS HYDRAULIC MOVEMENT Kodjy Nmg Ajpfx Akxslt DROP DOWN INTERNAL INFINITELY VARIABLE SPEED CONTROL ON THE WORK HEAD SPARE SWIVELLING WORK HEAD RANGE OF TOOLING

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning diameter over cross slide: 170 mm, spindle bore: 75 mm, turning diameter over bed slide: 280 mm, center width: 1,600 mm, spindle speed (max.): 1,320 rpm, TECHNICAL DETAILS Swing diameter over bed: 280 mm Swing diameter over cross slide: 170 mm Centre height: 220 mm Centre distance: 1600 mm Spindle speed range: 25 - 1320 rpm Spindle bore: 75 mm Kledpfx Akoy Iwm Rexot Tailstock quill taper: MT 4 MACHINE DETAILS Machine weight: approx. 2025 kg EQUIPMENT Heidenhain digital readout Multifix tool holder Coolant system Machine lamp

Condition: used, Year of construction: 1971, turning diameter over bed 297 mm turning diameter over bed slide 160 turning length 500 mm short taper holder Größe 5 spindle bore 36 mm spindle turning speed range 30-3550 U/min number of speeds 18 quill adjustment 90 mm tailstock quill taper MT 3 cross adjustment +15 tailstock adjustment - manual 500 mm weight of the machine ca. 610 kg dimensions of the machine ca. 1,4 x 0,7 x 1,2 m cessories: Forkardt V-block chuck, Ø 160 mm Collet chuck, Collets (see photo) Steel Multifix system, size A with 3 quick-change inserts rotating center point Ksdpfx Akey Hxp Doxslt chip guard chuck guard fixed steady rest The machine comes from the training workshop of a renowned German corporation.

Condition: good (used), functionality: fully functional, Type 4 Klsdpfjy Hqynex Akxjt Technical data : Center width approx. 400 mm Center height above bed 120 mm 24 speeds from 71 - 2240 rpm Drive power 0.6 / 0.8 kW Longitudinal feed, infinitely variable approx. 6 - 450 mm/min

Condition: good (used), Lathe Manufacturer: Hungary Year of manufacture: 1971 Machine number: 5849 Type / Model: E2N-500 Kodpfey E E Tyjx Akxjlt Centre distance: 500 mm Spindle bore: 26 mm Centre height: 130 mm Turning diameter over bed: 260 mm over carriage: 150 mm Speed range: 46 to 2,140 rpm Connection: 2.3 kW Accessories / Equipment: Condition: Good Weight: 0.65 t Dimensions: 1,800 x 600 x 1,400 mm

Condition: used, functionality: fully functional, center height: 180 mm, Parallel lathe PADOVANI 1000 x 180 MODEL: LABOR 180 S Spindle bore: 34 mm Hydraulic chuck Hydraulic tailstock Used, fully operational machine Internal code: svr 407 Kodjy A Sqtopfx Akxslt

Condition: excellent (used), Very good condition Kljdpfoy Al Uxsx Akxst Digital, Multifix, collets W32

Condition: good (used), turning diameter over bed 280 mm turning diameter over slide rest 170 mm turning length 600 mm weight of the machine ca. 400 kg spindle passage 26 mm speeds 55-2000 U/min total power requirement 1,4 kW Kledpfx Aoyz Dg Rokxst dimensions of the machine ca. 1,5 x 0,8x 1,3 m Including EMCO SOD grinding support Including EMCO 4-jaw chuck Including machine feet Including change gears

Condition: like new (used), Weiler Primus Excellent condition! With accessories Kjdpfoyy Ngtox Akxolt

Condition: excellent (used), Year of construction: 2009, Heidenhain digital display Working area Centre height: 310 mm Klodpfx Aksyyv N Ujxjt Centre distance: 1625 mm Max. turning diameter in the gap: 880 mm Max. turning diameter over bed: 620 mm Turning diameter in front of the longitudinal carriage: 580 mm Turning diameter over cross slide: 425 mm Bed width: 350 mm Length of the gap in front of the faceplate: 200 mm Main spindle bore: 80 mm Spindle mounting: DIN 55027/8 Optional Camlock spindle mounting: DIN 55029/8 12 spindle speeds: 30 – 1500 rpm Cross slide travel: 365 mm Top slide travel: 165 mm Drive power: 5.5 kW Coolant pump motor power: 0.06 kW Weight: 1805 kg

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C—NEW in Special Light Grey Paintwork!!! Technical Data: >> Machine No. 92-027, Year of manufacture: 1992 >> Centre height: 140 mm >> Distance between centres: 500 mm Kljdpfeyylq Usx Akxjt >> Spindle speeds: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short Taper Spindle Nose DIN 55022-5 with bayonet lock >> Tailstock taper: MT 3 >> Feed rates: 0.012 to 0.9 mm/rev >> Thread cutting: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches: 0.25 to 12 mm >> Weight: approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: >> 3-axis digital readout by K&C, brand new, 12-month manufacturer’s warranty with operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 1 piece 3-jaw chuck with 1 set of jaws >> 1 piece 4-jaw chuck with 1 set of jaws >> Electronic spindle protection >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop About the machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been freshly repainted in light grey. A very attractive machine. The 3-axis digital readout by K&C has been retrofitted. All measuring scales are new and fitted with protective covers to prevent contamination. The carriage movement is smooth and even throughout. Take the opportunity to view this machine under power on site and convince yourself of its condition.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C - NEW - Special Light Grey Paint Finish!!! Technical Data: >> Machine no. 92-029 - Year of manufacture: 1992 >> Center height: 140 mm >> Center distance: 500 mm >> Spindle speed: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock taper: MK 3 >> Feeds from 0.012 to 0.9 mm/rev >> Thread types: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 12 mm >> Weight approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Ksdeyylqhepfx Akxslt Accessories and Equipment: >> 3-axis digital readout by K&C, new, 12-month manufacturer's warranty, with operating manual Functions: Switching between mm/inch, ABS/INC coordinate selection, value halving, reference point, tool programming for up to 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 1 three-jaw chuck, 1 set of jaws >> 1 four-jaw chuck, 2 sets of jaws >> Electronic spindle protection >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop About the machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been newly painted in light grey. A very attractive machine. The 3-axis digital readout by K&C has been retrofitted. All scales are new and equipped with protective covers to shield them from dirt. The carriage runs smoothly and evenly. Take the opportunity to view this machine under power on site and see its condition for yourself.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C NEW in Special Light Grey Finish!!! Technical Data: >> Machine No. 92-028 Year of manufacture: 1992 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speed: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock MK 3 >> Feeds: 0.012 to 0.9 mm/rev >> Possible threads: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 12 mm >> Weight approx. 700 kg >> Length 1.4 m, Height 1.2 m, Depth 0.55 m Accessories and Equipment: >> 3-axis digital readout by K&C, new, 12-month manufacturer warranty with operating manual Functions: Switchable mm/inch, coordinate selection ABS/INC, display value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, change of counting direction, >> 1 piece 3-jaw chuck, 1 set of jaws >> 1 piece 4-jaw chuck, 1 set of jaws >> Electronic spindle guard >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop Kledpoyyb T Ssfx Akxet About the machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been repainted in light grey. A very nice machine. The 3-axis digital readout from K&C has been retrofitted. All measuring scales are new and equipped with cover plates to protect them from dirt. The slides move freely and smoothly. Take the opportunity to inspect this machine under power on site and see its condition for yourself.

Condition: excellent (used), Year of construction: 2009, GDW 350 CNC CNC Lathe GDW 350 CNC with Fanuc Oi Mate Control, Year of Manufacture 2009, in Excellent Original Condition The machine comes from the special production division of a renowned German mechanical engineering company. CE compliant!! Technical Data: Year of manufacture: 2009 Model: GDW 350 CNC TECHNICAL SPECIFICATIONS Swing over bed: 350 mm Swing over cross slide: 190 mm Distance between centers: 400 mm Spindle bore: 58 mm Drive power: 7.5 kW Speed range: 30–6000 rpm Special features: • Linear guides on all axes Kljdpfx Aksyxfczsxst • Direct position measurement system • Centrally mounted ball screw • Removable chip tray • Excellent chip removal due to slant bed design • High safety standards • State-of-the-art control system • Overload clutches on all feed axes • 8-position disc turret for short tool change times • Washable chip tray About the machine: Offered here is a GDW 350 CNC lathe with Fanuc Oi Mate control, year 2009. This lathe is in excellent original condition. It comes from a facility where it was only lightly used for special production tasks. The control system is very user-friendly. The guides are regularly lubricated via the central lubrication system. The GDW 350 CNC has been mechanically and electrically tested at our site. Take advantage of the opportunity to inspect and test the GDW 350 CNC under power at our location. You can find additional lathes from renowned manufacturers on our website.

Condition: good (used), functionality: fully functional, Scope as per image. Infinitely variable speeds up to 3,000 rpm. Klodpfxjyvu Axo Akxst

Condition: good (used), Centre height: 125 mm Klsdeyu R H Nspfx Akxot Distance between centres: 800 mm Max. turning diameter over bed/over slide: 280/245 mm Spindle mount, thread according to DIN 800 Spindle bore: 24 mm Infinitely variable spindle speeds: 26 - 2000 rpm 36 longitudinal feeds: 0.019 - 0.528 mm Metric thread pitches: 0.25 - 6 mm 44 inch threads: 4 - 112 TPI Electrical connection: 380 V, 0.7/1.4 kW Required space: Approx. weight: 500 kg