KARASIOTOS ike

Condition: excellent (used), Year of construction: 1997, still a very nice panel saw 2 m sliding table 7.35 kW motor Hodjyagpqspfx Ahujng Location: Freiburg area

Condition: used, Year of construction: 2022, controller manufacturer: Sonstige, controller model: Amada, _____ Hnodpfx Ahoyad A Uouog Description: Year of manuf. : 2022 Material: Round material:Ø 20 -101.6 mm Rectangular material:20 - 80 mm Cut length:10 - 6,000 mm Saw blade: Design:Disposable carbide saw blades Dimensions:Ø 360 x 2.0 mm Saw: Cutting speed:automatic control Revolutions:55- 180 Feed rate:0 -30 mm/sec Drive power:11 kW x 4P Horizontal clamping pressure:15.2 kN Vertical clamping pressure:3.9 kN Feed system: Drive system:AC servo + ball screw Feed length:715 mm Feed speed:30 m/min Bar loader: Max. diameter:100 mm Standard length:6,500 mm Magazine extension:By 2,000 mm Sorting section:With 2 switches Equipment: Material feed:Bar feeder Chip disposal:Chip conveyor Emulsion mist separator:Air Champion

Condition: used, Cut length Hnjdpfx Ahoyac Aasusg Laser line 400V

Condition: excellent (used), Catalogue number: 7866 TECHNICAL DATA - Max. blade diameter: 300mm - Blade bore diameter: 30mm - Blade guard - Cutting height with installed blade: 250mm, 60mm - Max. cutting width: 600mm - Ability to cut at an angle in the vertical plane – arm or blade movement - Arm rotation left/right - Motor: 3kW - Table size: 1130x1010mm - Extraction port diameter: 50mm - Dimensions (LxWxH): 1150x1190x1510mm - Weight: 220kg Hnsdpfjx U Tymjx Ahusg ADVANTAGES – Italian-made – Not repainted – DTR technical documentation – Very good condition – Used saw Net price: 6,500 PLN Net price: 1,550 EUR (based on an exchange rate of 4.2 PLN/EUR) (Prices may change subject to exchange rate fluctuations)

Condition: ready for operation (used), Year of construction: 2008, overall weight: 1,400 kg, total height: 1,838 mm, product length (max.): 9,400 mm, This Emmegi Luna 450 TU/5 Circular Metal Saw was manufactured in 2008. It features a saw blade diameter of 450 mm and a spindle diameter of 32 mm. The saw blade motor operates at 2.2 kW with a speed of 2800 rpm. It supports cutting lengths from 310 mm to 5000 mm and has a weight of 1400 kg. Dimensions are 9400x1400x1838H. Contact us for more information about this machine. • Saw blade motor power: 2.2 kW • Saw blade motor speed: 2800 rpm • Installed power: 5.6 kW • Minimum cutting length: 310 mm • Maximum cutting length: 5000 mm • Saw blade feed speed: 0-60 mm/s Hnjdpfx Ahjx U Drgeueg • Cutting speed: 66 mm/s • Carriage stroke speed: 20 m/min • Angles: 45°/0/45° • Working pressure: 6-8 bar • Air consumption per cycle at 6 bar: 15 Nl • Saw blade diameter: 450 mm • Saw blade spindle diameter: 32 mm Dimensions Machine Depth 1400 mm

Condition: excellent (used), Year of construction: 2016, Format 4 Kappa 550 Positioning control e-motion – TFT screen Year of manufacture: 2016 320 cm sliding table 5.5 kW motor with brake Scoring unit control Max cutting height: 200 mm Saw blade: 250 - 550 mm Speeds: 3000 / 4000 / 5000 rpm Scoring blade rotation speed: 9000 rpm Motorized rip fence Saw blade tilting up to 45 degrees, single-sided Electric height adjustment Operator panel at eye level Hodpfx Ahsx Rugteujng Crosscut fence with digital display Movable support rail with digital angle display Crosscut fence with length compensation Extraction connection: 120 mm and 100 mm Extension arm with swing-away function Cutting width: 1348 mm Crosscut fence up to 3200 mm Control station on sliding table Dimensions (without extension arm): 3400 x 2200 mm Weight: 1300 kg

Condition: excellent (used), Year of construction: 1995, For sale: A.Costa dual-shaft multi-blade saw, model Puma, with two 30kW motors, dual-shaft, ready for operation, complete with infeed tables. Reliable equipment for production use. Thank you. Hnodpex Rrvfjfx Ahuog

Condition: ready for operation (used), Year of construction: 2009, operating hours: 36,000 h, overall weight: 2,700 kg, total height: 1,900 mm, This KASTO KASTOflex F Circular Metal Saw was manufactured in 2009. It features a weight of 2700 kg, operates on 400 V, and includes an automatic feed, residue bunker, and coolant device. It supports mitre cuts and has a loading station with a 20-compartment chain magazine. The discharge side boasts a 5 m long apron conveyor with programmable discharge stations. Consider the opportunity to buy this KASTO KASTOflex F Circular Metal Saw. Contact us for more information. Additional equipment • Voltage: 400 V • With automatic feed • Residue bunker • Coolant device • Mitre cut • Loading station, chain magazine with 20 compartments on the infeed side • Discharge sorting station, discharge side with 5 m long apron conveyor and programmable discharge stations on both sides • Minimum quantity lubrication • including 2x shelfs from Kasto Hnodpfx Ahsx Rpdysujg Extra Information Shelves included Cutting ranges: 04/08 with saw blade 450 mm diameter Round Flat (W x H) Square (W x H) Cutting range 90° @ 150 200 × 100 140 x 140 mm Cutting range 45° x 80 × mm Cutting range 60° × 60 100 × 100 mm Minimum material height for flat material 8 mm Remnant length in automatic cycle at 90° 35 mm Remnant length in automatic cycle at 45° 95 mm Material support height 1,050 mm Features: Total connected load 8 kW Connected load coolant pump 0.1 kW Frequency-controlled drive (optional) 4 kW Cutting speed continuously variable 10 - 60 m/min Direct dimension input up to 9,999 mm Max. permissible material curvature 12 mm/6 m Feed length in one stroke at 90° 2,030 mm Feed length in one stroke at 45° approx. 1,970 mm Saw feed speed 16 - 520 mm/min Saw blade rapid return 2,000 mm/min Material feed speed 0 - 20 m/min Max. clamping force of material feed vise 12,500 N Max. clamping force of vertical vise 25,000 N Clamping force Reducible (option) Saw blade diameter, special flange Mounting hole according to DIN 8576 350 mm 40/4 x 11/63 mm Saw blade diameter Mounting hole according to DIN 8576 with intermediate ring 400, 450 mm 50/4 x 14/80 mmMachine also available without the shelving system. Dimensions Machine Depth 4800 mm

Condition: excellent (used), functionality: fully functional, Casolin SC-OO Circular Saw Cutting width on the right: 1060mm Scoring unit Maximum cutting height: 100mm with 350mm blade Manual angle adjustment of the saw blade up to 45° Manual raising and lowering of the saw blade Hnjdpsx Ihq Tofx Ahuog Variable blade speeds by belt: 3200-4500-6000 rpm Main motor power: 4kW Scoring unit motor: 0.75kW

Condition: used, Year of construction: 1993, Camam brand equalizer Hjdpjx Elnqefx Ahueng

Condition: used, Year of construction: 1997, functionality: fully functional, cutting width (max.): 610 mm, saw blade diameter: 600 mm, type of input current: three-phase, - Year of manufacture: 1997 - Two pneumatic stops TECHNICAL SPECIFICATIONS: - Saw blade diameter: 600 mm - Max cutting width: 610 mm (with element height 30 mm) - Max cutting height: 160 mm (with element width 380 mm) - Motor power: 7.5 kW - Sawdust extraction outlet: 2 x 100 mm - Two pneumatic stops for cutting to set length - Hydraulic element clamping and blade movement - Stepless cutting speed adjustment - Infeed table: 1000 mm / 470 mm D-90 mm Hjdpfxsx Ekmro Ahuong - Outfeed table: 1500 mm / 500 mm D-60 mm - Spindle diameter: 30 mm - Blade rotational speed: 2800 rpm Transport dimensions - 280x165x140 cm - Weight: 600 kg

Condition: ready for operation (used), Year of construction: 1996, This Emmegi Radial Star TU/6 was manufactured in 1996. A used double miter saw, it features a roller conveyor, clamping device, and upgraded PC control. Its design is precise, stable, and robust, ideal for detailed metal sawing tasks. Consider the opportunity to buy this Emmegi Radial Star TU/6. Contact us for more information. • Condition: Used, well-maintained, and ready for use • PC control: Upgraded Hodpfxox D D Auj Ahueng • Design: Precise, stable, and robust • Note: No dust extraction • Additional equipment • Roller conveyor, right-hand side, 3000 mm • Clamping device (section side) • Spacer profile for roller conveyor (LMS-D 450/500) • Pneumatically swiveling material roll support • Lubrica lubrication unit for LMS-D • Digital miter display for pre-selecting intermediate miters (LMS/LMS-D) • Label printer UBI Easy Coder 101 for LMS-D • Thermal paper roll labels with removable adhesive (for Formula 21/S or UBI Easy label printers) • Software extension for extra-long cutting up to 9000 mm (LMS-D) • Software extension for cutting corner angles • Software extension for cross-cutting • Drivers for Schüco systems

Condition: ready for operation (used), Year of construction: 2019, overall weight: 1,500 kg, total height: 1,250 mm, working width: 930 mm, product length (max.): 2,200 mm, General Data Machine weight 1500 kg Measurements height 1250 mm Dimensions Machine Length 2200 mm Technical Specification Working Width 930 mm Feed Speed 12 m/min This WINTER MBS 930 was manufactured in 2019. It features a motor power of 22.0 KW and a spindle diameter of 74 mm. The saw blade diameter is 205 mm, and it operates at a speed of 2600 rpm. Feed speed ranges from 0 to 12 m/min. Ideal for precise wood cutting. Contact us for more information. Hedsx D E T Ujpfx Ahujng Application Types Sawing (Wood)

Condition: excellent (used), Catalogue number 7834 TECHNICAL DATA - Maximum diameter of main blade without scoring unit: 400mm - Maximum blade diameter with scoring unit: 350mm - Maximum cutting height for 350mm blade: 100mm - Main blade adjustable up/down and tiltable - Large blade guard - Spindle diameter: 30mm - With sliding table - Cutting length on sliding table: 1400mm - Cutting width at fence: 1180mm - With side table - Fence on side table adjustable at an angle - With scoring unit - Maximum scoring blade diameter: 120mm - Spindle diameter: 20mm - Main blade motor power: 4kW - Scoring unit motor: 0.75kW - 2 rotation speed settings - Table dimensions: 1120x1020mm - Table dimensions with extension: 1820x1720mm Hnjdpfox Arrhox Ahueg - Extraction nozzle diameter: 130mm - Dimensions L/W/H: 3650x2150x1450mm - Weight: 720kg ADVANTAGES – Made in Poland – With scoring unit – DTR technical documentation – Used saw, in very good condition Net price: 11,900 PLN Net price: 2,840 EUR (depending on the rate 4.2 EUR) (Prices may vary with significant rate fluctuations)

Condition: excellent (used), Catalogue number 7833 TECHNICAL DATA - Max blade diameter: 400mm - Blade bore diameter: 30mm - Max cutting height: 110mm - Main blade adjustable up/down and at an angle - Blade guard included - With side carriage - Angle guide - Cutting length on carriage: 870mm - Cutting width at the fence: 600mm - Main motor approx.: 4kW - Table dimensions: 900x1020mm - Extraction port diameter: 110mm - Overall dimensions (L/W/H): 2500x1400x1000mm - Weight: 530kg ADVANTAGES – Polish manufacture – Includes side carriage – DTR technical documentation – Used saw, very good condition Net price: 7500 PLN Hjdpfxjx Arimo Ahusng Net price: 1790 EUR based on 4.2 EUR exchange rate (Prices may change with significant fluctuations)

Condition: like new (used), For sale is a used Felder K700 panel saw with a cutting width of 800 mm. The machine was only briefly in use for demonstration purposes at our facility. Therefore, it can be considered as new and comes with full warranty/guarantee. Technical specifications: - Tilting circular saw 90-45° - Sliding table 1300 mm - Mitre fence 1100 mm - Cutting width 800 mm - 4 kW (5.5 HP) motor, 400 Volt - Machine no. 425.04.050.25 The machine is located at A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: saw, circular saw, panel saw, panel Hsdpfx Aoxzd Aishuong Reference: R-N1194

Condition: used, Horizontal ripsaw with input and output conveyor Hat saw: Length: 170 cm Height: 215 cm Width: 90 cm Motor power: 22.5 kW Roller conveyor: Hnodpsxyhu Hefx Ahuog Length: 550 cm Height: 150 cm Width: 53 cm Roller width: 40 cm Roller conveyor: Length: 500 cm Width: 55 cm Height: 155 cm

Condition: ready for operation (used), REMA RESZEL CROSSCUT SAW, horizontal adjustment, swiveling arm up/down with counterweight, cutting assistance with power cable, ready for operation, 2.2 kW motor. Important: blade diameter 350 mm, table equipped with one roller at front and rear, very good condition, capable of cutting at virtually 4 angles. Radial arm saw DMNE 650/35. - CE certificate - Warranty and post-warranty service - Brand new machine TECHNICAL PARAMETERS: - Saw blade diameter: 350 mm - Max. cutting height: 95 mm - Max. cutting width: 580 mm - Arm swivel angle in vertical plane: ±90° - Table swivel angle in horizontal plane: +90° - Table swivel angle in vertical plane: ±90° - Motor power: 2.2 kW Hnjdpsxx U Azjfx Ahusg - Spindle speed: 2920 rpm - Spindle end diameter: 30 mm - Extraction nozzle diameter: 80 mm - Air demand in extraction system: 550 m³/h - Machine weight: 180 kg

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, main saw diameter: 315 mm, tool diameter: 315 mm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Main saw blade diameter: 315 mm Max. tool diameter: 315 mm MACHINE DETAILS Hodpfx Ahexxakqjuong Installed total power: 4 kW EQUIPMENT CE marking Included scoring saw blade Tiltable saw blade

Condition: good (used), max. saw blade diameter: 400 mm spindle diameter: 30 mm adjustable blade up/down max. cutting height: 130 mm min. cutting width: 250 mm max. cutting width: 2350 mm electric saw spacing adjustment motor power: 2 x 4 kW feed carriage motor power: 0.75 kW Hnsdpfxoxvmw Se Ahusg

Condition: good (used), 3 cutting units Saw blade diameter: 550 mm Max spacing between outermost blades: 10 m Motors: 3 x 3 kW Hsdpfx Aexvmq Sohueng 2-stage feed Power supply: 400 V

Condition: used, Year of construction: 1982, From business liquidation: Ulmia 1710S Year of manufacture: 1982 Mitre cuts up to 45° Maximum cutting height at 90°: 75mm – at 45°: 50mm Hodpfx Ahsxq N T Eoujng Saw blade: 250mm Table size: 630x500mm 380 Volt Cutting width to the right of the saw blade: 650mm The machine is operational, but shows heavy signs of use!

Condition: good (used), Year of construction: 1991, From business liquidation: Ulmia 1710S Year of manufacture: 1991 Mitre cuts up to 45° Max cutting height at 90°: 75 mm – at 45°: 50 mm Saw blade: 250 mm Table size: 630x500 mm Hnedpfxsxqrwte Ahuog 380 Volt Cutting width to the right of the saw blade: 650 mm Motor brake

Condition: good (used), Code: 0230 Brand: MAKITA Model: 5603R - CE Standard Circular saw with case for cutting wood, plastic, aluminum, and various materials - CE Standard Hnsdpoxn Stcjfx Ahuog Technical data: Blade diameter mm 165 Motor 1100 W single-phase Rpm 5000 Max cutting depth at 90° mm 54 Max cutting depth at 45° mm 38 Weight kg 4,9 Transport not included

Condition: used, Year of construction: 2017, functionality: fully functional, cutting height (max.): 2,200 mm, cutting length (max.): 4,200 mm, saw blade diameter: 250 mm, We are offering a Format 4 Kappa V60 vertical panel saw, purchased as an ex-display model. The machine has only been used very occasionally by us, serving as a backup or to supplement our processing capacity. The unit is in very good condition. Please feel free to contact us. Motor power: 4.5 kW (6.0 HP) - Cutting length: 4200 mm - Cutting depth: 60 mm - Cutting height: 2200 mm - Year: 2017 The listed price is net. Hjdpsxg Ecnofx Ahusng