Central Catalana Maquinaria, S.a.

Condition: ready for operation (used), Year of construction: 1986, Immediately available ex location: Fully automatic milling machine Busch Model NF 8/32 Year of manufacture: 1986 Slot width up to 32 mm Ndjdjxy N I Iepfx Agmed Working length up to 6100 mm Automatic material feed Automatic infeed Drive 5.5 kW Accessories: support tables, holders, milling cutters, coolant system, digital display Weight: 4 tons Price: EUR 4,500 plus VAT, ex location

Condition: good (used), Year of construction: 2009, functionality: fully functional, Technical details max. wheel diameter 2-45 mm gear width 250 mm max. module 1,5 mm min. module 0,5 mm Control Fanuc 18i-MB weight of the machine ca. 2,2 t dimensions of the machine ca. 2100 x 1440 x 1700 m Additional information The combined CNC gear hobbing and worm milling machine KOEPFER MZ 120 is characterized by its flexible usability and is used in the small module area. Just by swiveling the milling spindle from the horizontal to the vertical position and selecting the corresponding operating mode of the CNC control, the worm milling machine becomes a gear hobbing machine and vice versa. CNC control Fanuc 18i-MB (Dialog/ISO) CNC axes = X-axis plunge axis Z-axis longitudinal axis C-axis workpiece spindle B-axis tool spindle V-axis loader axis longitudinal A-axis swivel axis tool spindle head (included as an option) Y-axis shift axis (included as an option) With the following production programs: Worm milling Hobbing Worm hobbing Bevel gear and spur gear milling Bevel gear hobbing Milling cycles = straight, oblique, crowned toothing, radial, radial-axial, co- and counter-rotating milling, roughing, finishing, worm gears, straight-toothed bevel gears, face gearing (option only in the partial process) Worms [Equipment] Coolant tank 300 liters KF with LNS Turbo MS 250 Chip conveyor, built in 2021!!! Kraft and Bauer fire extinguishing system Spiral conveyor Machine documentation Nedpfx Aoxy Nhhjgmsdd [Technical data] Workpieces: Workpiece diameter 2-45 mm Max. workpiece length 250 mm Tooth length 150 mm Max. module in steel= 1 mm (gear hobbing) 1.5 mm (worm milling) 0.5 mm (bevel gear hobbing) Tools: Cutter diameter= 16-32 mm (gear hobbing) 40-63 mm (worm milling) Machine: Max. setting angle of milling head= +/- 45° (gear hobbing) +/- 30° (worm milling) Shift travel= 34 mm (manual adjustment) 34 mm (CNC axis) Collet/retraction mandrel W 20 Max. speed of workpiece spindle 770 rpm. Milling spindle drive 0.55 kW Max. milling spindle speed 8000 rpm Axis drives = X-axis (plunging) / travel 80 mm via CNC Z-axis (longitudinal feed) / travel 190 mm via CNC C-axis (workpiece axis) via CNC Rapid traverse = X-axis 6000 mm/min. Z-axis 6000 mm/min. Hydraulic unit 0.37 kW

Year of construction: 2020, operating hours: 30 h, condition: ready for operation (used), General Data Machine weight 640 kg Measurements height 1860 mm Measurements depth 1100 mm Movement Z-Axis Movement 222 mm Y-Axis Movement 56 mm Main Drive Number of axis 3 This 3-axis MECO MEC-55 CNC keyseating machine was manufactured in 2020, featuring a robust design with a maximum sample diameter of 400 mm and a total working area of 220 mm. It includes automatic Z and Y axes with speeds up to 9 m/min and 1.8 m/min respectively, and a manual W axis with a 360º rotation capability. If you are looking to get high-quality milling capabilities consider the MECO MEC-55 CNC machine we have for sale. Contact us for more information. Ndsdpsxy Apxefx Agmsd Application Types Milling

Year of construction: 2017, condition: ready for operation (used), Offered is an OptiMill MF 4V milling machine, almost new, 100h. Year of construction 2017, travel ranges X/Y/Z: 800mm/320mm/400mm, stepless spindle speed 9-6750rpm in 8 speed ranges, with electronic speed control, quill stroke: 127mm, 3-axis digital display DPA21, right/left rotation reversing switch, drilling depth stop, cross table X/Y 1244mm/230mm T-slot 16mm, chuck guard, coolant system, manual central lubrication, universal compressed-air tool clamping system ISO 40, stepless table feeds in X/Y, weight approx. 1200kg. Viewing is possible by arrangement. Nodoxyk Ucepfx Agmedd

Condition: ready for operation (used), Offered is a milling machine from MAHO with Heidenhain TNC 121 control, table X/Y 1000mm/600mm, SK40 tool holder, 3526h. Operating manual is available. Inspection is possible by appointment. Nsdpfx Aoxyk U Aogmsdd

Year of construction: 1987, condition: ready for operation (used), Offered is a Deckel FP4NC vertical milling machine with Heidenhain TNC 355 control. Year 1987, including tool cabinet as well as various tools. Travel distances: X/Y/Z: 560mm/500mm/410mm, dimensions X/Y/Z: approx. 1800mm/1600mm/2000mm, weight: approx. 2400kg. Viewing is possible by appointment. Ndsdpfjxyk Upex Agmjd

Year of construction: 2006, condition: ready for operation (used), Main Drive Number of axis 3 Movement Y-Axis Movement 250–300 mm Z-Axis Movement 250–300 mm Ndsdpfsxxngaox Agmsd This 3-axis SCHÜCO PBA 3250 was manufactured in 2006. It features a working length of approximately 3250 mm and is capable of processing aluminum and steel profiles. Equipped with a CNC controller and Schüco software, this machine is fully functional and has been regularly maintained. If you are looking to get high-quality milling capabilities, consider the SCHÜCO PBA 3250 machine we have for sale. Contact us for more information. Application Types Milling

Year of construction: 1994, condition: ready for operation (used), General Data Machine weight 12000 kg Control Unit Brand HEIDENHAIN Model TNC415 This 3-axis Zayer ZF 2000 gantry milling machine was manufactured in 1994. It features a robust table clamping surface of 2000 × 800 mm, with longitudinal, transverse, and vertical travels of 1703 mm, 803 mm, and 863 mm respectively. It supports a maximum table load of 6000 kg and offers rapid traverse rates up to 15,000 mm/min. If you are looking to get high-quality milling capabilities, consider the Zayer ZF 2000 machine we have for sale. Contact us for more information. Application Types Nedsxxnkxepfx Agmodd Milling

Condition: new, Year of construction: 2002, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 13347, Brand new showroomodel: Technical specifications: · Automatic feeds and rapid traverses adjustable by DC motor and PLC control · Hardened and ground main spindle gears · Hardened and ground slideways with central automatic lubrication · Automatic gearbox lubrication, main spindle equipped with electric brake · All controls on one side of the machine · Hardened and ground ball screw spindles for precise movement · Automatic hydraulically operated tool release and automatic clamping · for longitudinal, transverse, and vertical movement · Clamping surface (hor) fixed angle table 800x400 mm · 7 T-slots 14mm, 50mm center-to-center · Max. workpiece weight 400 kg Ndjdpfxexxkn Ho Agmsd · Mounting surface (vert) base slide 1000x260 mm · 5 T-slots 14mm, 50mm center-to-center 50 mm Longitudinal travel of base slide/automatic 500 mm Cross travel of main spindle slide/automatic 350 mm Vertical travel of base slide/automatic 400 mm Clamping surface (hor) universal tilting rotary table 700x400 mm Hor. rotation of universal table 360° Tilt left-right universal table 30° Tilt front-back universal table 30° Number of automatic feeds: infinitely variable Automatic longitudinal and cross feed range: 10-1000 mm/min Automatic vertical feed range: 10-1000 mm Rapid traverse, longitudinal and cross travel: 1500 mm/min Rapid traverse, vertical travel: 1500 mm/min Speed range: vert./hor. Spindle 50-2500 rpm Number of speeds: 18 Main spindle motor power: 4 kW Feed motor power: 2.2 kW Hydraulic motor: 0.8 kW Lubricator motor: 0.04 kW Cooling pump: 0.04 kW Power supply: 380 V 3 Ph 50 Hz Machine dimensions: 1020 x 1640 x 1710 mm Machine weight: 2600 kg · Universal 2-sided tilting swivel table · Fixed angle table · 3-axis digital readout: Yeef GSW3 · Cooling system · 24 V work light · Vertical head with quill and spindle feed

Year of construction: 2007, condition: ready for operation (used), This Datron M35 was manufactured in 2007. It features a Renishaw 3D probe and direct shank clamping with an additional replacement spindle. A clamping device in the front area enhances its functionality. The spindle is a water-cooled Jäger model, complete with a cooling unit. For more information about this machine, please reach out to us. Application Types Ndedpfx Agjxxdwbjmod Milling

Year of construction: 2008, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 346100, Machine SAR-1000-B-015 including accessories: ULT ASD 300 Ex extraction unit. The operating manual can be provided as a PDF. The machine is currently in the condition shown in the pictures. It can be placed on pallets for collection if required. The machine has been inspected by Schunk, who determined that the following spare parts are needed: - Z-axis - Bearings for Y1 and Y2 axes - Replacement of power cable, Hall sensor cable, and pneumatic hoses - X-axis brake - Extraction nozzle and extraction hose - Shuttle sensor (B4.3/E) - Tool holders (5 pieces) - Replacement of UPS - Hold-down brush - Bulb for signal lamp Nedpfxexwvruj Agmsdd - Hold-down sealing ring, pneumatic cylinder, guide shaft and plain bearing bush, spindle retaining plate - External exhaust hose ULT - Table lift cylinder (?) According to Schunk, material requirements are approx. €16,000. As we are selling the machine as defective/in need of repair and have listed all known deficiencies, the item is sold under exclusion of any warranty or liability for material defects.

Year of construction: 2012, condition: ready for operation (used), Travel X/Y/Z: 600mm/410mm/500mm, speed: 10000rpm, tool holder: BT-40, tool stations: 24, rapid traverse: 36m/min, table dimensions X/Y/Z: approx. 800mm/450mm, max. table load: 450kg, repeat accuracy: 0.003mm, positioning accuracy: +/-0.005mm. Machine dimensions X/Y/Z: approx. 2000mm/2300mm/2800mm, weight: approx. 3500kg. Documentation available. An on site inspection is possible. Nsdsxwn I Ijpfx Agmsdd

Condition: ready for operation (used), Two nearly identical Haas CNC milling machines are available. Travel X/Y/Z: 710mm/400mm/390mm, table dimensions X/Y: 710mm/400mm, max. table load: 250kg, speed: 10000rpm, power: 11.2kW, rapid traverse: 60m/min, feed rate: 30m/min, tool positions: 20, positioning accuracy: +/-0.005mm, repeatability: +/-0.0025mm. Machine dimensions X/Y/Z: approx. 1700mm/1800mm/2400mm, weight: approx. 2400kg. Automation included. Documentation available. An on site inspection is possible. Njdpfx Asxwn Nfogmsdd

Year of construction: 2015, condition: ready for operation (used), A CNC milling machine Spinner is available. Travel X/Y/Z: 760mm/460mm/460mm, table dimensions X/Y: 900mm/410mm, max workpiece weight: 350kg, tool stations: 24, max tool weight: 8kg, max tool length: 200mm, speed: 12000rpm, max tool diameter: 80mm, tool holder: SK40. Machine dimensions X/Y/Z: approx. 2600mm/1600mm/2850mm, weight: approx. 4000kg. Including automation and robot M10. Documentation available. An on site inspection is possible. Nodpfoxwn I Ujx Agmedd

Condition: ready for operation (used), A CNC universal tool milling machine Hermle is available. Travel X/Y/Z: 700mm/550mm/500mm, table dimensions X/Y: 1000mm/500mm, quill stroke: 100mm, tool holder: SK40, spindle speed: 3150rpm, feed rate: 2m/min, rapid traverse: 5m/min, max. workpiece weight: 400kg. Machine dimensions X/Y/Z: approx. 3900mm/3300mm/2100mm, weight: approx. 3300kg, control: Heidenhain TNC 150. An on-site inspection is possible. Ndedpfx Ajxwcu Ajgmod

Year of construction: 1995, condition: ready for operation (used), Travel X/Y/Z: 850mm/630mm/500mm, table dimensions X/Y: 1200mm/550mm, max. table load: 700kg, tool holder: SK40, tool stations: 34, speed: 5000rpm, spindle head swivel: +/-90°, feed rate: 10m/min, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 4000mm/2800mm/2400mm, weight: approx. 6800kg. Documentation available. An on-site inspection is possible. Nodpfx Ajxwct Segmsdd

Condition: used, Motor power: 1.0 / 1.4 kW Spindle mount: MK 3 with drawbolt thread Table size approx.: 450 x 150 mm Weight (estimated) approx.: 600 kg Dimensions (W x D x H) approx.: 1 x 0.6 x 1.6 m Nsdpfx Ajxv Am Njgmodd

Year of construction: 1990, condition: ready for operation (used), Travel X/Y/Z: 700mm/550mm/500mm, table dimensions X/Y: 1000mm/490mm, tool holder: SK40, speed: 3150rpm, quill stroke: 100mm. Machine dimensions X/Y/Z: approx. 3500mm/2500mm/2100mm, weight: approx. 3300kg, control: Heidenhain 415, operating hours: approx. 64000h. Including coolant pump and an enclosed length measuring system LS403C. Documentation available. An on-site inspection is possible. Nodpfx Agoxvrvgsmedd

Year of construction: 1987, condition: ready for operation (used), Travel X/Y/Z: 560mm/500mm/450mm, tool holder: SK40, speed: 4000rpm, feed rate: 3.6m/min, rapid traverse: 4m/min, table dimensions X/Y: 530mm/900mm, max. table load: 450kg. Machine dimensions X/Y/Z: 2350mm/2200mm/2000mm, weight: approx. 2200kg, control: Deckel Contour 2. An on-site inspection is possible. Nodpfsxvddvjx Agmodd

Year of construction: 2022, condition: like new (used), functionality: fully functional, controller model: CNC-Steuerung, total length: 1,745 mm, total width: 1,877 mm, total height: 2,100 mm, machine/vehicle number: 411546, The Kunzmann milling machine WF 410 M is very rare and has only been used for light-duty work. It is therefore immediately ready for operation. Working area: Ndodpfjxvbkgsx Agmjd Longitudinal: 410 mm Cross: 350 mm Vertical: 450 mm Main drive (100%/25% duty cycle): 8.5/16.2 kW Speed range: 1–4,500 rpm Tool holder: SK 40 DIN ISO 7388-1 Feed range: up to 5 m/min Display/traverse control: TNC 128 Weight: approx. 1900 kg Clamping surface: 650 x 375 mm T-slots: 5x 14H7 Table load: 250 kg

Condition: good (used), PACKAGE with 5 machines Ndjdexvbiiepfx Agmsd automated table

Condition: not inspected (used), Year of construction: 1990, functionality: unexamined, LINE GICAMILL S24/6000 gantry milling machine from 1990. CNC NUM 760F. X 6000, Y 2600, Z 1000. Table size 6000 x 2000 mm. Distance between columns 2445 mm. Clearance under crossbeam 1335 mm. Spindle 35 kW, 1620 rpm. Siemens motors. Njdpoxu U Rwefx Agmodd

Condition: used, Year of construction: 2010, functionality: fully functional, Model: ZX 6350 C SN: 1004026 Supplied with the following configuration: - SINO 3-axis digital readout, Model: SDS-6-3V - Milling head rotatable and swiveling +/- 90° - Quill feed operated via cross handle or fine feed with handwheel - Spindle speed range: 40 – 1,750 rpm - Automatic table feed on X-axis - Manual tool clamping vertical/horizontal with M12 drawbar - Manual clamping on all 3 axes - Coolant system - Chip tray - Lighting - Including accessories: (machine vice HP-40) - Technical documentation - CE-compliant version - Weight: 1,120 kg Technical Specifications: Table size: 280 x 1,000 mm Number of T-slots: 5 pcs. T-slot size: 14 mm Max. drilling capacity in ST37: Ø 30 mm Travels: X-axis: 490 mm Y-axis: 260 mm Z-axis: 460 mm Spindle head (manual): 330 mm Vertical milling head: Quill travel: 120 mm Spindle taper: ISO 30 Motor output: 1.5 kW Spindle speed range: 115 – 1,750 rpm Spindle speed steps: 8 (115 - 230 - 290 - 360 - 580 - 720 - 875 - 1,750) Horizontal spindle: Spindle taper: ISO 30 Motor output: 2.2 kW Spindle speed range: 40 - 1,300 rpm Spindle speed steps: 12 (40 - 60 - 80 - 110 - 150 - 200 - 270 - 380 - 510 - 680 - 950 - 1,300) For horizontal spindle operation, the upper beam with head can be fully rotated +/- 90° on the column. Feeds X-axis: Number of feeds: 8 steps (24 - 40 - 65 - 100 - 185 - 285 - 470 - 720 mm/min.) Min. distance spindle nose to table: 95 mm Max. distance spindle nose to table: 470 mm Ndjdpfx Asxu Uwkogmjd Dimensions (LxWxH): 1,520 x 1,330 x 2,220 mm Weight approx.: 1,120 kg

Year of construction: 1990, condition: ready for operation (used), Two nearly identical Maho milling machines, one with and one without a tool changer, as well as a complete range of accessories/spare parts, are available. Travel X/Y/Z: 600mm/450mm/450mm, tool holder: ISO40, quill stroke: 80mm, spindle speed: 5000rpm, feed rate: 4m/min, rapid traverse: 6m/min. Tool diameter: 130mm/100mm, max. tool length: 250mm, max. tool weight: 6kg. Machine dimensions: approx. 3150mm/3750mm/2150mm, weight: approx. 3600kg. Documentation available. On-site inspection possible. Ndsdpfoxu I Atox Agmod

Condition: ready for operation (used), controller manufacturer: Mazatrol 640, empty load weight: 19,000 kg, total length: 3,274 mm, total width: 8,100 mm, total height: 3,546 mm, Paletchanger 2 tafels Hoge druk koeling 15 bar Schroottransportband Maximale werkstukafmetingen: 3240 x 880 x 640 mm Longitudinal travel X-axe: 3000 mm Cross travel Y-axe: 800 mm Travel Z-axe: 585 mm Ndjdpfx Ajxuwxqjgmsd Dimensions clamping space- table: (2x) 750 x 3240 mm Power on spindle: 30 kW Admission in millinghead (ISO): ISO 50 Max speedrange: max 6000 rpm