Transparentus Machinery GmbH

Condition: used, Lathe Wagner WDE500 Djdpoxlz Rxjfx Acwjcn

Condition: good (used), Year of construction: 2006, Internal item no.: 25070 CNC Lathe Index ABC Year of manufacture: 2006 Including bar loader (Breuning Profimat 42.6) Attention! The machine has a defective hollow clamping cylinder, which must be replaced. Other than that, the machine was fully operational until disassembly. Technical Data: Control: Siemens 840D Dcsdpfxsxlzi Ue Acwsn Collet chuck: Hainbuch Number of spindles: 2 (main spindle / synchronized spindle) Spindle motor power: 29 kW Spindle bore: 52 mm Max. turning length: 280 mm Max. spindle speed: 5,000 rpm Turret 1 Number of tool stations: 8 Travel (X/Z): 90 mm / 280 mm Rapid traverse X/Z: 24 m/min / 24 m/min Feed force X/Z: 5,500 Nm / 5,500 Nm Turret 2 Number of tool stations: 6 Travel (X/Z): 81 mm / 80 mm Rapid traverse X/Z: 16 m/min / 24 m/min Feed force X/Z: 8,300 Nm / 5,500 Nm Machine weight approx. 3 t Space requirement approx. 6.0 x 2.0 x 2.0 m

Condition: good (used), Year of construction: 2007, The machine is in good technical condition, testing is possible by prior arrangement. Dcedpfx Aoxlu Dfjcwon

Condition: ready for operation (used), Year of construction: 2022, operating hours: 674 h, functionality: fully functional, spindle speed (max.): 6,000 rpm, travel distance X-axis: 140 mm, travel distance Y-axis: 70 mm, travel distance Z-axis: 235 mm, bar diameter: 42 mm, TECHNICAL DETAILS MAIN SPINDLE Max. bar diameter: 42 mm Travel: 100 mm Spindle speed: 6,000 rpm Spindle drive power: 7.5/5.5 kW Minimum C-axis resolution: 0.001 degrees SUB SPINDLE Max. bar diameter: 34 mm Spindle speed: 5,000 rpm Spindle drive power: 5.5/3.7 kW Minimum C-axis resolution: 0.001 degrees Number of turrets: 2 UPPER TURRET Number of positions: 8 Travel X: 140 mm Travel Z: 235 mm Travel Y: 70 (+/-35) mm Driven tools speed: 5,000 rpm Driven tools power: 1.0 kW Dedpoxlfu Uofx Acwjcn LOWER TURRET Number of positions: 6 Travel X/Z: 140 / 310 mm Number of spindles: 2 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,220 x 1,460 x 1,700 mm Machine weight: 3,100 kg ELECTRICAL SUPPLY Total connected load: 30 kVA Operating Hours Machining hours: 674 h Control on hours: 4,953 h

Condition: used, Year of construction: 2017, machine/vehicle number: IntNr231327, 1 used CNC turning center B436-Y2, year of manufacture `17 with two turrets, each with Y-axis Control: Mitsubishi M700 Condition: very good Technical Data - Number of axes: 10 (X1 / Z1 / Y1 / C1 / X2 / Z2 / Y2 / C2 / X3 / Z3) - Number of spindles: 2 - Number of turrets: 2 MAIN SPINDLE - Spindle nose: A2-5 - Spindle drive power: 11 [kW] - Spindle speed: 7000 [rpm] - Max. bar diameter: 36 [mm] - Max. main chuck diameter: 100 [mm] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 11 [kW] - Spindle speed: 7000 [rpm] - Max. bar diameter: 36 [mm] - Max. machinable diameter: 100 [mm] - Minimum C-axis resolution: 0.001 [degrees] TURRET 1 - Number of stations: 12 - Number of driven stations: 12 - Speed of driven tools: 6000 [rpm] - Power of driven tools: 4.6 [kW] TURRET 2 - Number of stations: 12 - Number of driven stations: 12 - Speed of driven tools: 6000 [rpm] - Power of driven tools: 4.6 [kW] ELECTRICAL SUPPLY - Supply voltage: 400 [V] WEIGHT AND DIMENSIONS - Footprint: 3682 x 1430 [mm] - Machine height: 1900 [mm] - Machine weight: 5000 [kg] Equipment - Coolant tank Dcsdsxiwilepfx Acwsn - Internal coolant supply (IKZ) - Chip conveyor - Tool touch probe: Renishaw, incl. tactile measuring probe - Parts removal - Sub spindle axis design with glass scale and sealing air - Sub spindle prepared for pneumatic chuck - 4 straight tool holders - 4 angled tool holders - 4 boring bar holders - 1 parting tool holder - 1 chuck The machine can be inspected under power and cutting operation by prior appointment. Subject to technical changes, errors, and prior sale!

Condition: used, Year of construction: 2003, controller manufacturer: Mitsubishi, controller model: TX-8H, _____ Description: Year of manuf. : 2003 Control : Mitsubishi TX-8H Turning length : 450 mm Mainspindle: Technology:Belt-driven spindle Speed:5.600 rpm Power:18,5 kW Torque:170 Nm Barcapacity:42 mm Workpiececlamping:Collet chuck, Hainbuch Spanntop Gr. 42 Subspindle: Technology:Belt-driven spindle Speed:5.600 rpm Power:11 kW Torque:150 Nm Djdpsxiukmofx Acwecn Workpiececlamping:Collet chuck, Hainbuch Spanntop mini Axfix Gr. 42 Ejector:Hydraulic with flush Toolcarrier I (X/Y/Z): Technology:Turret with 10 stations Taper:VDI30 Tooldrive:4.000 rpm, 4 kW, 12,4 Nm Movement in X/Y/Z:140/70/450 mm Rapid travers in X/Y/Z:15/6/30 m/min Toolcarrier II (X/Z): Technology:Turret with 10 stations Taper:VDI30 Tooldrive:4.000 rpm, 4 kW, 12,4 Nm Movement in X/Y/Z:140/450 mm Rapid travers in X/Y/Z:15/30 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Cooling unit with Paperbeltfilter Rawmaterialfeed:Barlaoder, FMB SL80S Finished part removal:Interface hydraulic part catcher with coneyor belt Oilmistseparation:Electrostatic extraction, LTA AC3001 Further Accessory:Misc. Toolholder

Condition: used, Year of construction: 2004, controller manufacturer: Mitsubishi, controller model: TX-8i, _____ Description: Year of manuf. : 2004 Dcodpjxhbfnsfx Acwjn Control : Mitsubishi TX-8i Turning length : 450 mm Mainspindle: Technology:Belt-driven spindle Speed:4.000 rpm Power:18,5 kW Torque:230 Nm Barcapacity:65 mm Workpiececlamping:Collet chuck, Hainbuch Spanntop Gr. 65 Subspindle: Technology:Belt-driven spindle Speed:4.000 rpm Power:11 kW Torque:210 Nm Workpiececlamping:Collet chuck, Hainbuch Spanntop Gr. 65 Ejector:Hydraulic with flush Movement in Z:520 mm Rapid travers in Z:30 m/min Toolcarrier I (X/Y/Z): Technology:Turret with 10 stations Taper:VDI30 Tooldrive:4.000 rpm, 4 kW, 16 Nm Movement in X/Y/Z:140/70/450 mm Rapid travers in X/Y/Z:15/6/30 m/min Toolcarrier II (X/Z): Technology:Turret with 10 stations Taper:VDI30 Tooldrive:4.000 rpm, 4 kW, 16 Nm Movement in X/Y/Z:140/450 mm Rapid travers in X/Y/Z:15/30 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Cooling unit with Paperbeltfilter Rawmaterialfeed:Barlaoder, FMB SL80S Finished part removal:Hydraulic part catcher with coneyor belt Oilmistseparation:Electrostatic extraction, LTA AC3001 Further Accessory:Misc. Toolholder, Rinsing pistol

Condition: ready for operation (used), Year of construction: 1996, Make: SPINNER Type of machine: TC 65 Year of manufacture: 1996 Control system: Siemens 820 T Machine's weight: 4,5 t Tool holder: VDI 20 x-travel: 200mm z-travel: 500mm Speed range: 4000 1/min Overall dimensions: 1,7 x 2,2 x 1,7 m Tool turret - slots: 16 Pl. C-axis: 0,001 Grad Spindle opening: 65 mm Dodexg Td Hjpfx Acwocn

Condition: good (used), machine/vehicle number: 8607719 / 8412427, Equipment: rotational speed infinitely variable, 2x OZAKI lathes - 1x in working order; OSL-III 8607719 Dsdpfx Aoxg R Nyocwjcn - 1x defective (for spare parts); OSL-III No. 8412427

Condition: good (used), Year of construction: 1999, functionality: fully functional, Two machines of the same type available immediately ex production! (Please state your offer price) Sales only within Europe, including Turkey. Price excludes packaging; delivery term: FCA (machine location) ===== For technical data, please refer to the handout. All warranty rights excluded. We do not guarantee the accuracy of the technical data or year of manufacture, the completeness of accessories and tool equipment, or compliance with all safety and environmental protection requirements as stipulated in accident prevention regulations. No sales to private individuals. Dcodpoxg Rqqefx Acwon

Condition: used, Year of construction: 2015, control Siemens mit ShopTurn Swing diameter over bed 470 mm turning diameter 196 mm turning length 444 mm Feed size 200 mm spindle bore 62 mm bar passage 52 mm spindle tunring speed 4.500 U/min z-travel 520 mm x-travel 161 mm rapid traverse (x/z) 30 m/min number of tool places 12 Pos. Number of working hours ca. 14.287 h In our opinion, the machine is in good used condition and can be inspected under power by appointment. Dcjdpfxjxgu Rhj Acwjn Technical Features & Accessories: - Parts catcher - Chip conveyor - C axis - Various fixed and driven tool holders Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: excellent (used), Year of construction: 2022, operating hours: 11,543 h, functionality: fully functional, machine/vehicle number: 8107000628B, CNC lathe SPRINT 32 - 8, year 2022, with IEMCA bar feeder CNC control: Fanuc 32i-B Main spindle: Max spindle bore: 32 mm Max spindle speed: 8,500 rpm Power: 7.5/5.5 kW Sub spindle: Max spindle bore: 32 mm Max speed: 8,500 rpm Power: 3.7/2.2 kW Travel axes: X1 70mm, Y1 405mm, Z1 100mm, X2 300mm, Z2 200mm, Y2 135mm Tool holders: Slide 1: 4 x internal machining, 6 x external machining, 4 x driven tools Slide 2: 4 x internal machining, 4 x driven tools Dcodpfxsxfq I Ho Acwsn Total power requirement: 16 kVA Dimensions (L x W x H): 2,309 x 1,448 x 2,087 mm Weight: 3,450 kg

Condition: excellent (used), Used Takamaz Dual Spindle Turning Lathe For sale!!! ✅Takamaz XD-10i ✅Dual chuck Collet & 3 Jaw ✅6000 ✅X 120mm Z 650mm Dcedpfxoxdvg Ss Acwen ✅10 Tool Turret with live tools ✅Fanuc 21i-T ✅With Auto Loading Unloading Arm

Condition: used, Year of construction: 2005, operating hours: 39,767 h, functionality: fully functional, machine/vehicle number: 07300002141, spindle bore: 65 mm, Equipment: documentation/manual, DMG Gildemeister TWIN 65 + bar loader IEMCA Master 880 MP + 3 front-driven tools + 4 90° radial tools Machine is in production until Jan 2026 Dcjdpoxdb Dpefx Acwen MAIN MAINTENANCE PERFORMED X2 and Z2 axis guides - 2023 2 turrets - 2022 & 2024 2 drives - 2024 Bar feeder - 2024 Only reason for sale: switching to a lathe with Y axis.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 42999, spindle bore: 80 mm, turning diameter over bed slide: 50 mm, center width: 1,500 mm, controller manufacturer: Fanuc, net weight: 3,900 kg, TECHNICAL DETAILS Max. swing diameter: 50 mm Centre distance: 1,500 mm Spindle bore: 80 mm Dcsdpfxsxdahae Acwsn MACHINE DETAILS CNC manufacturer: Fanuc Machine weight: approx. 3,900 kg EQUIPMENT 6-position tool changer

Condition: ready for operation (used), Year of construction: 2003, operating hours: 28,129 h, functionality: fully functional, machine/vehicle number: 3XY203, turning length: 150 mm, turning diameter: 120 mm, spindle speed (max.): 6,000 rpm, overall weight: 4,000 kg, controller model: FANUC Series 21i-TB, TECHNICAL DETAILS Max. turning diameter: approx. 120 mm Max. turning length: approx. 120 – 150 mm Spindle speed: max. 6,000 rpm Y-axis: available Tool turret: 12 stations, often with driven tools Main spindle motor power: approx. 5.5 – 7.5 kW Power of driven tools: approx. 2.2 kW Dedpfx Acjxctvnswocn MACHINE DETAILS Control: FANUC Series 21i-TB Voltage: AC200/200-220 V ±5% Frequency: 50/60 Hz ±1 Hz Phases: 3 Power supply: 25 kVA Total power: 19 kW Spindle motor: SP1 - 5.5/7.5 kW Control circuit: AC100 V, DC24 V Dimensions & Weight Dimensions (L × W × H): approx. 2,200 × 1,500 × 1,800 mm Weight: 4,000 kg Operating hours Machining hours: 28,129 h Power-on hours: 84,037 h Note: Extensive accessories are included in the scope of delivery.

Condition: ready for operation (used), Year of construction: 2006, operating hours: 41,448 h, functionality: fully functional, machine/vehicle number: 3XY2L08, turning length: 200 mm, turning diameter: 160 mm, spindle speed (max.): 6,000 rpm, overall weight: 2,270 kg, controller model: FANUC Series 21i-TB, TECHNICAL DETAILS Y-axis: available, milling operations C-axis: available on both spindles Main spindle speed: max. 6,000 rpm Max. turning diameter: approx. 160 mm Max. turning length: approx. 200 mm Tool turret: 12 stations, supports driven tools MACHINE DETAILS Control: FANUC Series 21i-TB Dedexctuqepfx Acwscn Electrical Data Voltage: AC 200/200-220V ±5% Frequency: 50/60 Hz ±1Hz Phase: 3 Power supply: 26 kVA Total power: 21 kW Control circuit: AC100V DC24V Dimensions & Weight Dimensions (L × W × H): approx. 2,300 × 1,600 × 1,900 mm Weight: 2,270 kg Operating hours Cutting hours: 41,448 h Note: Extensive accessories are included in the scope of delivery.

Condition: used, Year of construction: 2002, Manufacturer: Boley, Model BC 42 Year: 2002 Dcsdpfjxbzhiox Acwon Mitsubishi M6 3 axes (X, Z1 & Z2) Main and counter spindle 12-position turret VDI20 Irco bar feeder Weight: approx. 3,500 kg Condition: Main spindle bearings need to be replaced Accessories: Numerous VDI20 tool holders

Condition: used, Year of construction: 1996, max. bar material dia. 65 mm max. swing diameter 175 mm max. bar length 3.000 mm control System TX 8F travel -x axis 140 mm travel -z axis 520 mm CNC lathe | TRAUB - TNC 42/65 DG equipped with bar loader. The machine is in a well-maintained condition and can be inspected at any time under power. The machine videos from the production plant will be shared on request. Dcedpfx Aexbtq Nocwen Technical data of the machine will follow soon. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TNC65 | TNC-65 |TNC 42-65 DG | TNC 42/65DG

Condition: used, Year of construction: 2003, max. bar material dia. 65 mm control System TX 8H max. bar length 3.000 mm CNC lathe | TRAUB - TNC 65 equipped with bar loader . The machine is in a well-maintained condition and can be inspected at any time under power. The machine videos from the production plant will be shared on request. Dsdpfxsxbtp Es Acwjcn Technical data of the machine will follow soon. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TNC65 | TNC-65

Condition: ready for operation (used), Year of construction: 1959, functionality: fully functional, Frame saw for solid material. Strokes per minute: 70–160. Dcodpfexbnzisx Acwsn

Condition: used, Year of construction: 2005, functionality: unexamined, Miyano BND-51SY CNC lathe Serial no: 2WX85413 (02/2005) with Fanuc Series 18i-TB control Iemca Kid 70 bar feed Serial no: 0205120A01 (2005) Dedpjw U U Iwjfx Acwecn

Condition: good (used), Year of construction: 2020, functionality: fully functional, travel distance X-axis: 215 mm, travel distance Z-axis: 520 mm, quill diameter: 72 mm, quill stroke: 110 mm, overall weight: 3,070 kg, swing diameter over bed slide: 500 mm, swing diameter over top slide: 220 mm, Equipment: chip conveyor, CNC lathe OPTIturn S600 slant bed with Sinumerik 828 D control system, including the following options: - Safety Integrate - Remnant material detection and processing - Shopturn step programming - Network drive management - 3-D simulation - Real-time drawing/track back - 15.6-inch color display, multitouch - Spindle mount DIN ISO 702-1 No. 6; chuck through-hole Ø 65mm; hydraulically operated chuck Ø 215mm; tailstock mount MK4 - Hydraulic tool turret LS200 with 12 tool stations, max. holder height 25mm - 30° slant bed for especially large machining diameters - Dimensionally stable linear guides ensure long service life through maximum static and dynamic rigidity - Handwheels for manual movement - Heat exchanger on control cabinet - Includes machine feet - Hydraulic unit 1500W, 60 liters - Foot pedal for hydraulic chuck clamping/release - Foot pedal for tailstock with hydraulic quill - Halogen work lamp - Siemens servo motors on all axes - Chip conveyor - Chip trolley - Device for manual tool measurement - Portable electronic handwheel - Renishaw tool probe Dcsdpfxew U Rv Ds Acwsn - Includes machine feet - Electrical connection, 31 KVA three-phase 400V ~ 50 Hz - Control upgrade PPU290 SW8 - Sauter turret VDI30-12T - Automatic tailstock movement - Through-spindle coolant 20 bar - Oil skimmer - Coolant pump 5 bar - Automatic tool measurement - Automatic parts catcher - Axial driven tool holder - Radial driven tool holder

Condition: used, Year of construction: 2018, turning diameter 20 mm turning length 180 mm Dcodpfxjw U Enbs Acwsn control Fanuc 321

Condition: used, Year of construction: 2018, turning diameter 20 mm Dcjdpow U Emwjfx Acwon turning length 180 mm control Fanuc 32i