Ri̇mak End. Mak. Müh. İnş. San. Ve Ti̇c. Ltd.şti̇
Ri̇mak End. Mak. Müh. İnş. San. Ve Ti̇c. Ltd.şti̇ from İzmi̇t
This dealer has not yet provided a company description.
Mr Özgür Yıldız
Sanayi mahallesi İzmit sanayi sitesi 12.blok no 34
41040 İzmi̇t
Turkey
Current offers from similar dealers
Listing
Monheim am Rhein
7,669 km
Rotary Table Surface Grinding M/C-Horiz
ABAFRU 800 NC
ABAFRU 800 NC
Call
Condition: good (used), Year of construction: 1992, functionality: fully functional, Technical details
workpiece diameter 1000 mm
workpiece weight - kg
workpiece height - mm
grinding wheel motor 11 kW
total power requirement 25 kW
weight of the machine ca. 6500 kg
dimensions of the machine ca. 4100 x 3200 x 2600 mm
Additional information
Machine comes from a plant closure
Equipment:
Coolant system 500 liters with paper belt filter
4 grinding stones (3 of them unused)
Ppjdszg Tvcjpfx Anpju
Technical data:
Rotary table diameter 800 mm
Max. distance from rotary table to grinding spindle center 850 mm
Grinding wheel diameter 400 mm
Grinding wheel width 80 mm
Listing
Ensisheim
7,897 km
Surface Grinding Machine
BlanchardD20
BlanchardD20
Call
Condition: used, Surface Grinding Machine BLANCHARD type 20D
Shelf diameter: Ø 915 mm
Shelf speed: from 5 to 27 RPM
Grindstone diameter: Ø 500 mm
Maxi height under wheel: 450 mm
Spindle motor: 30 CV - 715 RPM
Ppedpfszg E Ukjx Anpeu
Electromagnetic chuck
Rapid Up/Down
Voltage 220 V Tri
Dimensions (L x W x H): 3700 x 2000 x 2600 mm
Weight: 6 T
Listing
Głowno
8,317 km
Rotary table grinding machine
FAS - GłownoSPO 800
FAS - GłownoSPO 800
Call
Condition: new, Year of construction: 2026, functionality: fully functional, The basic components of the grinding machine include: base, slides, column with grinding wheel spindle, rotary table, and control cabinet.
The table is driven by a mechanical transmission and a gearbox-frequency converter unit, and performs a rotary motion. The rotary speed of the table is adjusted using a potentiometer on the machine's control panel. In manual operation, the machine will have the ability to perform pulsed rotary movement of the table, controlled from the operator's panel. The transverse feed is performed by the column and spindle moving along the rolling guides of the base. This movement is realized using a ball screw with a belt drive and an asynchronous motor controlled by a frequency inverter.
The vertical feed is performed by the spindle moving along the sliding guides of the column. A ball screw is used to drive the vertical feed. The continuous feed of the column is stepless. These values are set from the control panel.
The machine will be equipped with a direct digital readout on the vertical axis with a resolution of 0.001 mm. An electronic handwheel for vertical axis feed during manual operation and an operator panel (programmable display) will be placed on the operator's panel. The grinding machine will have smooth adjustment of the grinding wheel spindle speed and the table speed. The machine will be able to operate in an automatic cycle with the possibility of programming the number of sparking passes and other parameters necessary for grinding in an automatic cycle.
Ppedpfx Aszfyvyenpsu
Safe operation of the grinding machine is ensured by a semi-enclosed cabin and all electrical and mechanical safeguards in accordance with CE standards.
1 Table working surface Ø800 mm
2 Maximum distance between the table surface and the spindle axis during manual spindle feed 350 mm
3 Minimum distance between the table surface and the spindle axis 125 mm
4 Maximum weight of the workpiece 2500 N
5 Range of steplessly adjustable table speed 2-100 m/min
6 Maximum horizontal column feed 450 mm
7 Range of steplessly adjustable column feed speed 0.2 – 3 m/min
8 Grinding wheel feed per: 1 encoder unit 0.001 mm
9 Minimum automatic grinding wheel feed 0.001 mm
10 Maximum automatic grinding wheel feed 0.040 mm
11 Speed of accelerated grinding wheel feed 1 m/min
12 Grinding wheel spindle speed 1000 – 2500 RPM
13 Diameter of new grinding wheel 400 mm
14 Diameter of worn grinding wheel 250 mm
15 Bore for mounting the grinding wheel 127 mm
16 Width of grinding wheel nominal / maximum 50 mm
Listing
Lüneburg
7,734 km
Rotary table grinding machine
BLANCHARD76 HD 120
BLANCHARD76 HD 120
Call
Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, Machining diameter: 4,000 mm
Podpfx Aszfma Esnpspu
Machining height: 850 mm
Control system: SIEMENS
Tool holder: Grinding segments
Listing
Lüneburg
7,734 km
Vertical CNC Precision Grinding Center
KMT LIDKÖPPINGVGG 4000
KMT LIDKÖPPINGVGG 4000
Call
Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Turning diameter: 4,000 mm
Turning height: 550 mm
Chuck: Wagner magnetic chuck
Pjdpfx Aezfl D Ajnpspu
Control system: SIEMENS
Automatic grinding wheel changer for each grinding spindle
Listing
Bruchsal
7,891 km
Rotary Table Surface Grinding Machine/DELTA 500
DELTALC 500
DELTALC 500
Call
Condition: ready for operation (used), Year of construction: 2011, DELTA LC 500 - Rotary table grinding machine
-CE marking
-Magnetic table - rotary table, 500mm
-Max. grinding diameter 500mm
-Grinding height (distance table - grinding wheel) approx. 230mm
-Grinding wheel dimensions (standard) 200x80x78mm
-Speed - grinding spindle approx. 2850 rpm
-Fine feed 0.01mm
Ppodpfezflxaox Anpju
-Distance / column - grinding spindle axis approx. 320mm
-Spindle motor 3 kW
-Coolant system
-Machine enclosure
-Documentation
Dimensions: L x W x H 1.3 x 0.8 x 1.8 meters / (00 kg
Errors and omissions excepted.
Listing
Bruchsal
7,891 km
Rotary table surface grinding machine / DELTA 400
DELTALC 400
DELTALC 400
Call
Condition: ready for operation (used), DELTA LC 400 / Rotary Table Surface Grinding Machine
-Magnetic chuck (rotary table) 400mm
-Max. grinding diameter 400mm
Pedpfxoy Sbgco Anpjpu
-Grinding height (distance table – grinding wheel) approx. 220mm
-Grinding wheel dimensions / standard / 200x80x78mm
-Spindle speed / grinding spindle 2840 rpm
-Fine feed 0.01mm
-Distance / column – grinding wheel axis 315mm
-Spindle motor / 3kW
-Lateral grinding wheel dresser
-Machine enclosure
-Coolant system
Dimensions: LxWxH 1.2x0.8x1.8 meters / Weight 700Kg
Errors and omissions excepted
Listing
Jadvygiškės
8,365 km
Rotary table grinding machine
UnigrindFDA 500
UnigrindFDA 500
Call
Condition: used, Year of construction: 2013, functionality: fully functional, Mobile valve machining / turning machine Unigrind FDA 500 for sale.
The machine is used, in good condition and fully operational. Inspection and testing on site are possible.
The Unigrind FDA 500 is designed for machining and repair of valve sealing surfaces, seats, and flanges. The equipment allows precise turning, milling, and surface refurbishment directly at the worksite.
Specification:
Model: Unigrind FDA 500
Year: 2013
Mobile valve machining machine
Suitable for repair of valves, flanges, and sealing surfaces
Accurate machining of flat and conical surfaces
Fits various types of industrial valves
Podpfjy R R Imox Anpspu
Compact and robust design
Professional industrial equipment
German quality
More info: Unigrind FDA 500
Suitable for energy, oil, gas, chemical, and industrial companies as well as repair workshops.
If you have further questions, we will be happy to assist you.
Listing
Jadvygiškės
8,365 km
Rotary table grinding machine
UnigrindKSM600
UnigrindKSM600
Call
Condition: used, Year of construction: 2019, functionality: fully functional, For sale: Unigrind KSM600 flat surface grinding/lapping table.
The equipment is in good condition and fully operational. Inspection and testing on site are possible.
The Unigrind KSM600 is designed for grinding and lapping flat sealing surfaces. It is suitable for machining and refurbishing surfaces of valves, gates, flanges, and other industrial components.
Specification:
Ppjdpfey R Rl Ssx Anpou
Model: Unigrind KSM600
Stationary flat surface grinding/lapping table
Intended for machining flat sealing surfaces
Suitable for valve, gate, and flange repair
Robust industrial housing
Stable and precise processing
Simple and user-friendly operation
Professional industrial equipment
More information: Unigrind KSM600
Suitable for repair workshops, energy, oil, gas, and industrial companies.
If you have any further questions, we will be happy to assist you.
Listing
Germany
7,841 km
Rotary Table Hole Grinding Machine
KEHRENRi 6
KEHRENRi 6
Call
Condition: used, Year of construction: 1995, rotary table diameter 600 mm
Podpfey Nfdasx Anpepu
boring diameter 600 mm
grinding height 450 mm
control Siemens Sinumerik 840 C
total power requirement 30 kW
weight of the machine ca. 14,5 t
Listing
Bruchsal
7,891 km
Rotary table surface grinding machine / ARTER A3
ARTERA3 - 16
ARTERA3 - 16
Call
Condition: good (used), Rotary Table Surface Grinding Machine ARTER A3 - 16
- Max. grinding diameter: 450 mm
- Grinding height: approx. 220 mm
- Workpiece weight: approx. 250 kg
- Automatic feeds
- Coolant system
- Machine enclosure
- Work light
Podpfxeyc Hkyo Anpopu
Dimensions:
LxWxH 2.5x1.5x1.7 meters / Weight 3500 kg
Subject to errors and typos.
Auction
Auction ended
Nordrhein-Westfalen
7,670 km
Rotary table surface grinding machine
ELB-SCHLIFFROTARY 50 SPS-NK
ELB-SCHLIFFROTARY 50 SPS-NK
Condition: repair required (used), Year of construction: 2000, functionality: not functional, machine/vehicle number: 49299, rotary table diameter: 600 mm, grinding height: 400 mm, workpiece weight (max.): 300 kg, grinding diameter: 500 mm, workpiece diameter (max.): 500 mm, TECHNICAL DETAILS
Workpiece diameter: 500 mm
Workpiece weight: 300 kg
Workpiece height: 400 mm
Grinding diameter: 500 mm
Grinding height: 400 mm
Table load capacity: 300 kg
Magnetic rotary table diameter: 600 mm
Rotary table speed: 20–80 rpm
Y-axis
Max. feed rate: 300 mm/min
Incremental position measurement system, rotary encoder, resolution: 0.001 mm
Z-axis
Max. automatic cross travel: 330 mm
Cross feed: 4–1,500 mm/min, adjustable
Incremental position measurement system, rotary encoder, resolution: 0.001 mm
Grinding spindle taper: 60 mm
Grinding wheel: 400 x 100 x 127 mm
MACHINE DETAILS
Total power requirement: 18 kW
Grinding spindle drive: 10 kW
Space requirement approx.: 2,500 x 2,700 x 2,800 mm
Control cabinet dimensions (L x H x D): 1,600 x 2,200 x 500 mm
Pedjxr U T Tepfx Anpopu
EQUIPMENT
Coolant system with paper band filter
NK grinding program
Electronic handwheel switchable for B-Y-Z axis
Machine enclosure with manually operated sliding door for loading and unloading
Note: The frequency converter for the grinding spindle is defective. An offer from ELB is available (costs € 3,712.50 + packaging and shipping).
Listing
Chapel Brampton
7,138 km
Rotary table grinding machine
Lumsden92ML
Lumsden92ML
Call
Condition: excellent (used), Year of construction: 1980, functionality: fully functional, machine/vehicle number: 92ML/109/11821, rotary table diameter: 1,220 mm, grinding height: 572 mm, total width: 4,394 mm, total length: 3,353 mm, overall weight: 13,700 kg, grinding wheel diameter: 711 mm, spindle speed (max.): 550 rpm, power: 35 kW (47.59 HP), table diameter: 1,219 mm, Lumsden 92 ML Vertical Spindle Rotary Surface Grinder , 48 Inch dia chuck, autosizing, table jog facility, Filtermist unit fitted with (2) extraction vents to rear of table guards, fitted with segmented wheel, serial number 92ML/109/11821. Machine tools manuals. Coolant filtration tank. Also with unused grinding stones segmented.
Pjdexgq D Depfx Anpepu
Table Diameter 48″ / 1219mm, Segmental Wheel Dia. 28” / 711mm, Max. Height Capacity 22.5″ / 572mm, Spindle Speed 550rpm, Table Speed 6 & 18rpm, Auto Feed 0.004-0.04 ins/min – 0.1-1.0 mm/min, Spindle Motor 50HP / 35Kw, Floor Space 14′ x 11′ / 4394 x 3353mm, Approx. Net Weight 12T/12200Kg, Approx. Gross Weight 13.5T /13700Kg1220
Listing
Chapel Brampton
7,138 km
Rotary table grinding machine
Lumsden93ML
Lumsden93ML
Call
Condition: refurbished (used), Year of construction: 1989, functionality: fully functional, rotary table diameter: 1,500 mm, grinding height: 457 mm, total height: 3,124 mm, total width: 3,150 mm, total length: 4,165 mm, overall weight: 15,000 kg, grinding wheel diameter: 863 mm, grinding spindle speed: 450 rpm, power: 45 kW (61.18 HP), table diameter: 1,500 mm, LUMSDEN Model 93ML Vertical Rotary Surface Grinder.
Refurbished with new bearings in table and spindle, reconditioned main motor, new rectifyer, lubrication system, new control panel.
Serial Number: to be advised
New 1980's originally
Country of Origin: UK
Segmental wheel dia 34"
Segments per set 16"
Table dia and grinding capacity 60"
Magnetic table dia (Humphreys) 60"
Max height wheel to Magnetic table 18"
Minimum height of wheel to table 4.1/2"
Spindle speed 450 rpm.
Table speeds 16 and 5.1/2 rpm.
Automatic feeds 10 rates .004-.040 ins/min.
Power elevation 25 ins/min.
Spindle motor 60 Hp / 960 rpm 45 kW
Table motor 6/2.1/2 HP /1440/480rpm.
Feed motor 1/4 Hp / 1440 rpm.
Psdjwugh Djpfx Anpepu
Elevation motor 1 Hp / 720 rpm.
Coolant pump motor 1 Hp / 1440 rpm.
Overall height of machine 10'3".
Floor space 13'8" x 10'4".
Approx net weight 15 tons.
Listing
Austria
8,415 km
Surface Grinding Machine
CHEVALIERFRG-400
CHEVALIERFRG-400
Call
Condition: new, neu
ca. 6 Monate ab Auftragse
Taiwan
111670 €
2110.56 €
400 mm
500 mm
400 mm
225 mm
400 mm
50 kg
450 mm
500 - 2200 1/min
5,5 kW
19 kW
2800 mm
2800 mm
2610 mm
2850 x 2000 x 2470 mm
3450 kg
Dm. 355 x 38 x Dm. 127 mm
0,001 mm
1.7 kW
2.4 kW
10 - 150 1/min
0.005 mm
0.003 mm
iSurface control with 10,4" touchscreen for fully automatic grinding
in machine manual wheel balancing
traveling column rib structure
AC servo motors für Y/Z axes and rotary table
Ppedpfxjwiq U Rs Anpsu
1 pc. wheel flange
1 pc. grinding wheel Dm. 355 x 38 x Dm. 127 mm
Coolant equipment with automatic paper filter and magnetic separator
automatic dresser on the table, with compensation
fully enclosed splash guard
electromagnetic round chuck, fine pole pitch (1+3 mm)
working lamp
warning lamp
operating manual in German and English
ALTERNATIVE:
model version FRG-400S with Smart iControl for profile grinding price on request
(symbol photos - showing model FRG-600)
Listing
Austria
8,415 km
Surface Grinding Machine
CHEVALIERFRG-600
CHEVALIERFRG-600
Call
Condition: new, neu
ca. 6 Monate ab Auftragse
Taiwan
122570 €
2316.57 €
600 mm
500 mm
600 mm
325 mm
600 mm
205 kg
450 mm
500 - 2200 1/min
5,5 kW
19 kW
2800 mm
2800 mm
2610 mm
2850 x 2000 x 2470 mm
3500 kg
820 mm
Dm. 355 x 38 x Dm. 127 mm
0,001 mm
1.7 kW
2.4 kW
10 - 150 1/min
0.005 mm
0.003 mm
iSurface control with 10,4" touchscreen for fully automatic grinding
in machine manual wheel balancing
traveling column rib structure
AC servo motors für Y/Z axes and rotary table
1 pc. wheel flange
1 pc. grinding wheel Dm. 355 x 38 x Dm. 127 mm
Coolant equipment with automatic paper filter and magnetic separator
automatic dresser on the table, with compensation
fully enclosed splash guard
electromagnetic round chuck, fine pole pitch (1+3 mm)
working lamp
Ppedpfxjwiq Nno Anpju
warning lamp
operating manual in German and English
ALTERNATIVE:
model version FRG-600S with Smart iControl for profile grinding moreprice € 3.600,00
Listing
Hattenhofen
7,981 km
Rotary table surface grinding machine
KehrenRi 6
KehrenRi 6
Call
Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 4304, rotary table diameter: 600 mm, grinding height: 450 mm, overall weight: 14,500 kg, Machine is equipped with 3 spindles, surface grinding, external grinding, bore grinding
Turret head B-axis with 1° division
Belt filter system included
Podpjvt A Rtofx Anpopu
Listing
Metzingen
7,973 km
Rotary Table Grinding Machine - Vertical
SIELEMANNRFsB 100
SIELEMANNRFsB 100
Call
Condition: used, Year of construction: 1969, rotary table diameter 1000 mm
grinding height 500 mm
grinding head - power requirement 15/5,5 kW
total power requirement 30 kW
weight of the machine ca. 18 t
dimensions of the machine ca. m
S I E L E M A N N (Germany)
Hydraulic Rotary Table Internal and Face Grinding Machine
with two grinding heads and with horizontal workpiece clamping
Model RFsB 100
Year 1969 / fully reconditioned by the manufacturer in 1990
_____
Max workpiece Ø 1,000 mm
Max. height of workpiece, approx. 400 mm
Mounting height under grinding spindles approx. 500 mm
Grindable Bore Ø, approx. 50 – 900 mm
Max. Workpiece weight approx.. 900 kg
Distance between Table bore and column 1.150 mm
Table Ø / Face plate Ø, approx. 1,000 mm
Table speeds, hydraulic, infinitely variable, right/left 5 – 60 rpm
Table/workpiece infeed, 5 steps 0.0025 – 0.025 mm/stroke
Table stroke approx. 500 mm
Distance between grinding spindle and machine body 600 mm
Surface Grinding Head Ø (Segmented wheel) 450 mm
Grinding slides stroke, max. 500 mm
Pjdpfx Ansu Su Apopspu
Grinding slide speeds, infinitely variable 0.2 – 1 m/m
Max. Internal Grinding spindle Ø 140/100 mm
Grinding cup wheel Ø, up to approx. 200 mm
Motor for Surface Grinding 15 kW / Motor for Internal Grinding Spindle 5,5 kW
Total electrical load, approx. 30 kW - 380 V - 50 Hz
Weight, approx. 18,000 kg
Accessories / Special Features
• The rotary table carries the workpiece and is also actuating the automatic
grinding infeed
• The relevant Grinding head can be swivelled in by turning the Column
(hydraulic lift) so the workpieces can be ground in one setting with exact
angles.
• Built-on magnetic face plate, Ø approx. 1,000 mm, with 5 T-slots and
stepless adjustment for the magnetism
• Automatic workpiece infeed, with automatic depth stop.
• Separate Height adjustment of internal grinding head, Grinding
spindle Ø 100 mm.
• Dressing devices mounted on each grinding head, Separate Switch Cabinet
and hydraulic unit,
• No Coolant Device available
This machine is ideal for grinding bulky and heavy workpieces like housings,
gears (!) bearing rings, cylindrical knives, etc.
Condition: Good. Machine can be inspected soon under power
Delivery : Ex stock as inspected.
Payment : Net, after conclusion of contract.
Listing
Kleinwallstadt
7,881 km
Rotary table surface grinding machine
ELB-SchliffROTARY 40 NC-K
ELB-SchliffROTARY 40 NC-K
Call
Condition: good (used), Year of construction: 2003, ELB Rotary 40 NC-K rotary table surface grinding machine, table diameter 400 mm, grinding height 300 mm, year of manufacture 2003, ELN NC-K control, spindle power 4 kW, grinding wheel 300 x 50 x 76.2 mm, rotary table with magnetic chuck diameter 400 mm, full enclosure, coolant system with paper band filter, can be inspected under power, we are happy to take care of installation / training and subsequent on-site service! Financing/leasing is no problem, we are happy to provide an offer!
Ppedpeuiafuofx Anpou
Listing
Metzingen
7,973 km
Rotary Table Surface Grinding M/C-Horiz.
ELB-SchliffSWR 60 T NC K
ELB-SchliffSWR 60 T NC K
Call
Condition: used, Year of construction: 1980, workpiece diameter 600 mm
Ppsdpfx Ajt Abrwenpeu
workpiece weight 400 kg
workpiece height 300 mm
total power requirement 35 kW
weight of the machine ca. 4500 kg
Listing
Schloß Holte-Stukenbrock
7,720 km
Cylindrical grinding machine- Surface- Internal- External
SIELEMANNR FuBR 80 NC
SIELEMANNR FuBR 80 NC
Call
Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, machine/vehicle number: 8151, rotary table diameter: 800 mm, grinding height: 750 mm, workpiece weight (max.): 800 kg, total height: 4,100 mm, total width: 26,650 mm, total length: 44,000 mm, feed length Y-axis: 750 mm, feed length Z-axis: 550 mm, overall weight: 13,000 kg, grinding wheel diameter: 400 mm, disc diameter: 400 mm, grinding spindle speed: 1,460 rpm, grinding diameter: 800 mm, control cabinet width: 650 mm, type of input current: DC, control cabinet height: 1,900 mm, control cabinet length: 1,800 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 1,460 rpm, table load: 900 kg, workpiece diameter (max.): 850 mm, grinding wheel width: 60 mm, table width: 1,240 mm, power: 35 kW (47.59 HP), rapid traverse X-axis: 2 m/min, rapid traverse Y-axis: 100 m/min, rapid traverse Z-axis: 2 m/min, space requirement height: 4,100 mm, space requirement length: 5,100 mm, space requirement width: 2,655 mm, Good day,
For sale is a well-preserved and completely functional Sielemann cylindrical grinding machine for the following applications: surface grinding, internal grinding and external grinding.
The machine has a swivel stand with 3 different sanding heads for the respective area of application.
Complete machine documentation is available and can be presented upon inspection.
The Sielemann offered here has always been serviced and maintained, most recently the components listed below were replaced:
- 3x New weight compensation cylinders
Ppsdpfx Ansrntirjpju
- 1x new hydraulic unit (complete)
- New guideway covers
- Revised rotary table group
Technical data
Machine length: 4.400mm
Machine width: 2,655mm
Machine height: 4.100mm
Machine weight: 13.000Kg
Control cabinet width: 650mm
Control cabinet height: 1.900mm
Control cabinet length: 1.800mm
Grinding table diameter: 800mm
Grinding table load capacity: 800kg
Grinding table drive power: 0.21 - 14.5KW
Grinding table speed: 100 1/min (both directions)
Grinding table workpiece clamping: Magnetic clamping plate incl. T-slots
Z-axis travel (grinding table): 550mm
Maximum grinding height (Y): 750mm
Lubrication pump Masch. Bed: 0,18KW
Lubrication pump Masch. Column: 0,1KW
Leak oil pump: 0,065KW
Hydraulic pump: 1.5KW
1) External round grinding head
Spindle drive power: 11KW
Spindle speed: 1,450 1/min
Grinding wheel: 400x50mm
Cone grinding spindle mount: D=65mm
Taper pitch: 1:5
Feed speed (Y): 100 mm/min
2) Internal round grinding head
Spindle drive power: 5.5KW
Grinding wheel: Variable
Feed speed (Y): 100 mm/min
3) Flat-round sanding head
Spindle drive power: 11KW
Spindle speed: 1,800 1/min
Grinding wheel: 400x50mm
Cone grinding spindle mount: D=65mm
Taper pitch: 1:5
Feed speed (Y): 100 mm/min
Viewing appointments possible at short notice by arrangement !!!
With kind regards
R.Suckow / Managing Director
UNITTOOL Werkzeugmaschinen GmbH
33758 Schloß Holte Stukenbrock
Görlitzerstraße 9
Listing
Erith
7,247 km
Rotary table grinding machine
NEW JAINNHERJHV-1008CNC Vertical Grinder (factory)
NEW JAINNHERJHV-1008CNC Vertical Grinder (factory)
Call
Condition: new, functionality: fully functional, he EUROPA JAINNHER JHV-1008CNC vertical grinding machine is designed for grinding of large components used in the transport, aerospace, power generation, oil & gas, hydraulic and precision components.
With a grinding internal diameter range from Ø50 to 800 mm, a maximum outside diameter of Ø1000 mm. The maximum height of the workpiece is 800mm, with a maximum worktable load of 1200 kg.
EUROPA Jainnher JHV-1008 CNC Vertical Grinder
Ppjdpfonzkvhsx Anpou
Capacity
Range of I.D. grinding 50 – 800mm
Maximum O.D grinding 1000mm
Z axis maximum grinding height (OD) 800mm
Z axis maximum grinding height (ID) 50 – 250 : 325mm / 250 – 800 : 800mm
Maximum swing diameter 1000mm
Maximum installed component height 800mm
Maximum work table load 1200kg
Email for latest factory build availability
Listing
Erith
7,247 km
Rotary table grinding machine
NEW JAINNHERJHP-4015CNC Plunge Type Grinder
NEW JAINNHERJHP-4015CNC Plunge Type Grinder
Call
Condition: new, functionality: fully functional, Jainnher Machine Co., Ltd. was established in 1982 and is dedicated to developing grinding machine technology, diversity and automation equipment. Jainnher is constantly offering new and improved machinery.
The new JAINNHER JHP-4015 CNC Plunge Type machine with FANUC CNC Control.
Hydrostatic and Hydrodynamic bearings.
Capacity Max ø work swing Ø400 mm
Max grinding length 1500mm
Max grinding dia. Ø380 mm
Max workpiece weight 150 kgs
Distance between centres 1500mm
Centre height 200mm
Grinding wheel Grinding wheel size Ø410 x 50-100 x 203.2mm
Max peripheral 33 m/sec
Wheel speed 1250rpm
Wheel head Feed angle 90
Swivel angle ±0
Rapid traverse speed 6m/min
Max. travel 280mm
Min. setting unit 0.0001mm
Grinding feed rate 0.001~6000m/min
Oil Pressure Hydrostatic = 20kg
Hydrodynamic = 3kg
Tailstock Retraction of quill 30mm
Quill diameter 70mm
Ppsdpfx Aonzib Eenpou
Centre taper MT.4 ( MT.5 option)
Hydraulic cylinder pressure 20kg
Work head Spindle speed (variable) 10~500rpm/min
Centre taper MT.4 ( MT.5 option)
Spindle type Telescopic (option
Swivel angle 120 (90ºCCW;30ºCW)
Work- table Min. setting unit 0.0001mm
Swivel angle CCW/CW +7º/-4º
Rapid traverse speed 10m/min
Max. travel 1500mm
Motor Grinding feed rate 0.001~6000mm/min
Grinding wheel motor 7.5HP 4P(opt. 10.0HP) 4P
Workhead motor 1.5KW
Work table (Z axis) 1.8KW
Work table (X axis) 1.8KW
Hydraulic pump 1/4 HP 4P
Wheel head pump Hydrostatic = 2.0HP
Hydrodynamic = 1.0HP
Coolant pump 1/8 HP 2P
Magnetic coolant separator 1/25HP 2P
Oil cooler -----
Oil tank Hyd. oil tank(slideways, screw ends & measurement) 60L
Wheel head lubrication 50L
Coolant tank 160L
Machine N.W (Fully enclosed) 8080 kg
G.W (Fully enclosed) 8480 kg
Dimension (Fully enclosed) 4900 x 2100 x 2000mm
Packing (Fully enclosed) 5090 x 2200 x 2200mm
Listing
Erith
7,247 km
Rotary table grinding machine
NEW DeltaLC400
NEW DeltaLC400
Call
Condition: new, functionality: fully functional, NEW Rotary table surface grinder available in the UK.
With up to a 400mm grinding diameter on this rotary table, vertical spindle surface grinder from Italian manufacturer DELTA, a leading surface grinder manufacturer with over 20,000 units sold worldwide.
The rotating table is controlled by asynchronous three-phase bipolar motors with 8/16 poles; thanks to these motors, the table can rotate at a speed of 40 rpm and at a rate of 30 rpm.
Delta Rotary surface grinder
Maximum grindable surface 400mm Ø
Distance between column and wheel axis 315mm
Max. distance between magnetic table and wheel 205mm
Podjnziakepfx Anpepu
Rapid feed per turn of handwheel 2mm
Micrometric feed by small handle 0,01mm
Size of cup wheel 200 x 80 x 78mm Ø
Size of abrasive segments 50 x 20 x 90mm
Motor power of the wheel (4 HP)-3 kW
RPM of the wheel (50 Hz) 2840rpm/min
Electropump motor power (0,08 HP)-0,06 kW
Mass of the machine 680kg
Rotary table surface grinder
Standard Equipment
Low tension electric system (24V).
Cooling system with electropump
Wheel-holder flange and grinding wheel.
Grinding wheel guard
Table guard.- Stakes key
Instruction book/testing certificate
Two colour painting RAL 5018-7032, bicomponent multicoat of paint
CE conformity certificate with respect to the Units
Directive CEE 89/392 and subsequent modifications
Stock machine complete with Automatic Downfeed control
Listing
Großostheim
7,869 km
Rotary table surface grinder
COSMOSRSG 100
COSMOSRSG 100
Call
Condition: new, Year of construction: 2026, Grinding area: 1000 x 450 mm, round table diameter: 1000 mm, grinding wheel: 400 x 100 x 127 mm, spindle power: 11 kW, including speed control, electro-permanent magnetic chuck diameter: 1000 mm with adhesive force control, automatic truing device mounted on the spindle head, including compensation of the truing amount, coolant system with paper band filter, user-friendly operation with Mitsubishi PLC control, alternatively SIEMENS 828 CNC control, new machine with 12 months warranty, highest precision at an unbeatable price/performance ratio. We can gladly carry out grinding tests on our showroom machine. We will handle the installation/training at your location, as well as provide service in the future. Financing/leasing is no problem; we will gladly provide a quote!
Pjdpfxeh I Tz Ss Anpjpu


























































































































































































