Carlstad Machinetools Ab

Condition: used, Year of construction: 2006, turning diameter 500 mm turning length 1300 mm control Fanuc 18i TB turning speed range - main spindle 0 - 3500 min/-1 drive capacity - main spindle 33 kW max. torque 800 Nm number of tool places 12 axial / 12 direkt Pos. tool taper VDI 40 output max. 8 kw max. torque 35 Nm turning speed range - driven tools 0 - 4000 U/min x-travel 318 mm z-travel 1360 mm y-travel -60 / +80 mm tailstock quill taper MT 4 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Bsdpfezawlcsx Af Rodc Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as subject to prior sale reserved!

Condition: used, Year of construction: 2004, XYZ Proturn VL 355 ProtoTRAK CNC Gap Bed Centre Lathe ProtoTRAK SLX Control (2004) Max’ Distance Between Centres 1000mm Max’ Swing over Cross-slide 225mm Max Swing over Bed 360mm Spindle Bore 52mm Spindle Speeds 50 – 4000 rev/min Spindle Motor 5.75Kw Quick Change Tool Post Tailstock MT4 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2004 Supplied with: 3 Jaw Chuck Interlocking Chuck & Main Guards 3 Toolholders TRAKing Constant Surface Speed Coolant Worklight Auto Lubrication For Sale with Jet Machinery Ltd Jet Machinery Stock No: #79196 Bdjdpfx Aezav N Tjf Rec Machine Serial Number: SL091 Cost: £13,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 2017, HYUNDAI WIA L280 CNC Lathe Year of manufacture 2017 Control system SIEMENS 828D Bedpfx Asy Uhxqjf Rsdc Turning diameter over bed 590 mm Maximum turning diameter 410 mm Turning length 720 mm Spindle nose A2-8, speed 3,000 rpm Spindle power 22/18.5 (30 min) kW Torque 729.5/613.5 (30 min) Nm X-axis travel - 220 mm Z-axis travel - 750 mm Equipment: SIEMENS 3D simulation SIEMENS ShopTurn dialog programming C-axis Chip conveyor with lateral discharge 10 tool positions (BMT55) 3-jaw chuck Ø 310 mm Foot switch for chuck Manual tool probe Manual steady rest with hydraulic quill Coolant tank 180 L Standard coolant nozzle USB and Ethernet interface Single-color signal light Included in the scope of supply: Complete set of VDI tool holders Assortment of turning tools Center punch Tool cabinet with contents Operating manual/documentation Machine parameters on USB stick Technical data & manufacturer’s brochure – see PDF. All technical data, illustrations, and content are non-binding and without guarantee. Subject to change and errors. All other accessories shown in the photos and video are not included in the scope of supply and are therefore not part of this sale. The scope of supply includes only the accessories that are explicitly listed here, in the order confirmation, and in the invoice. FCA (Free on Carrier, Truck) D-32457 Porta Westfalica Packaging only Delivery time: immediate Subject to prior sale / Payment due immediately upon completion of purchase

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 127094, spindle bore: 62 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 45 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,020 mm, total height: 2,000 mm, total length: 7,200 mm, total width: 2,000 mm, overall weight: 7,000 kg, spindle nose: JIS A2-S, controller manufacturer: OKUMA, controller model: OSP-P 200 L, operating hours of spindle: 5,000 h, number of slots in tool magazine: 12, OKUMA LB 300-M CNC lathe - Turning diameter over bed: 530 mm - Turning diameter over cross slide: 530 mm - Turning diameter over tool rest: 420 mm Bjdpfx Afoy Twgho Rodc - Distance between centers: 1020 mm - Spindle bore: 100 mm - Feed range Z-axis: 0.001 to 1000 mm/min - Rapid traverse Z-axis: 25,000 mm/min - Feed range X-axis: 0.001 to 1000 mm/min - Rapid traverse X-axis: 20,000 mm/min - Speed range of driven tools: 45 to 4500 rpm (infinitely adjustable) - C-axis adjustment: 360° - Rapid traverse of the C-axis: 200 rpm - Diameter of the tailstock: 90 mm - Including the tools located on the turret, two foot switches, operating manual (if available) - With chip conveyor and bar feeder SAMSYS, type: MULTI-3000 Note: the item must be collected between July 14th and 16th, 2026, on a date to be agreed upon. FCA D-45883 Gelsenkirchen - loaded onto a truck.

Condition: excellent (used), Year of construction: 1997, CN NAKAMURA-TOME Turning Center SC-450 CNC: FANUC SERIES 21-T Year: 1997 Power: 45 kW with chip conveyor 5 tool holders GOUBARD tilting and forklift-compatible chip bin Bsdjy S Smtopfx Af Rjdc 1 inspection point

Condition: excellent (used), Year of construction: 2018, Hyundai vertical turning center, Type WIA LV500RM Year: 2018 CNC: Fanuc Turret: BMT 75 Chip conveyor Bsdpfey S Sihex Af Redc Tilting and fork-liftable chip bin (Goubard)

Condition: excellent (used), Year of construction: 2017, XYZ SLX555 x 3m ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK SLX Control (2017) Max. Distance Between Centres 3000mm Max. Swing over Bed 560mm Max. Swing over Gap 935mm Max. Swing over Cross slides 350mm Max. Cross slide Travel 290mm Spindle Nose D1-11 Spindle Bore 104mm Spindle Speeds 30 – 1800rpm Spindle Motor 15Hp Quick Change Tool Post Tailstock MT7 Bedpfjy R Rdhex Af Rsdc Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2012 Dimensions: L x D x H 5220 x 2150 x 1950 mm Weight 7400 kg Supplied with: 3 Jaw Chuck Indexing Toolpost Machine Handbooks TRAKing®. Constant Surface Speed. Rapid Traverse with Joy Stick. 3 Point Fixed Steady Travelling Steady Interlocking Guards Auto Lubrication. Coolant. Worklight We can offer delivery & installation, operator training and warranties. *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79001 Machine Serial Number: SLM00072 £55,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2001, functionality: fully functional, turning diameter over cross slide: 360 mm, spindle speed (max.): 2,000 rpm, Used teach-in lathe COMEV Leonardo CM-300 x 2000, year 2001, CNC control D.Electron CN-Z32. Machine in good working condition, complete with tailstock, coolant tank with pump, manuals, electrical diagrams, and CE Declaration. Main features: • Centre height: 300 mm • Max turning diameter over bed: Ø 600 mm • Max turning diameter over carriage: Ø 360 mm • Distance between centres: 2,000 mm Bdodpjy R Ddujfx Af Rjc • Spindle bore: Ø 110 mm • Spindle speed: 2,000 rpm • Main spindle motor power: 12.5 / 18 kW • 4-position electronic turret

Condition: used, Year of construction: 2012, turning diameter 550 mm turning length 1500 mm Bsdpey N D Siofx Af Rjdc control Fagor 8055 x-axis 108 mm z-axis 3000 mm

Condition: used, Year of construction: 2004, turning diameter: 660 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,045 mm, total height: 2,600 mm, total length: 3,820 mm, total width: 2,060 mm, overall weight: 10,400 kg, CNC Turning Milling centre with Second Spindle CNC Control Mazatrol PC Fusion CNC 640 MT PRO Turning diameter 550/660 mm Turning length 1016 mm Spindle bore diameter 65 mm Spindle speed 35-5000 R/min X-axis movement 580 mm Y-axis movement 160 mm Z-axis movement 1045 mm B-axis travel 225 ° mm C-axis indexing 360° Spindle nose A2-6 Tool Taper Capto C6 Number of tools in magazine 40 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Bdedpsy Nytpsfx Af Rec

Condition: used, Year of construction: 2004, operating hours: 9,203 h, functionality: fully functional, machine/vehicle number: 8040939522C, total height: 2,276 mm, total length: 6,205 mm, total width: 2,214 mm, overall weight: 12,000 kg, For sale is a high-quality CNC turning machine, type Gildemeister CTX 620 Linear, manufactured in 2004. The machine underwent a comprehensive overhaul and technical refurbishment in 2025, with various components being replaced. This overhaul, performed by DMG Used Machine, cost €60,000 alone. Here is a brief overview of the work carried out during the overhaul: - Retrofitting of a steady rest (SMW) (clamping range 90-350mm) - Replacement of the energy chain (Z-axis) - Replacement of all components in the energy chains X and Z (cables, hoses, fittings, etc.) Bjdpfxsy I U Ulo Af Rsdc - Repair of the tailstock The machine has a 12-position tool turret VDI 50 (Duplomatic), 6 tool holders for driven tools, and a 400 mm chuck (KH400). Control system: Heidenhain. The machine is still occasionally used for production. Inspection is possible at any time, and the machine is connected to power. OTHER MACHINES ARE ALSO AVAILABLE FOR SALE; please inquire.

Condition: used, Year of construction: 1999, turning length: 1,000 mm, turning diameter: 500 mm, spindle bore: 80 mm, spindle speed (max.): 2,500 rpm, capacity: 1000 x 570 mm spindle bore: 80 mm multi-tool turret Siemens control Bjdpfx Afoy E Hvvo Redc steady rest 3-jaw rotary chuck, 315 mm

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 110532, turning length: 1,980 mm, spindle bore: 105 mm, spindle speed (max.): 2,500 rpm, turning diameter over bed slide: 600 mm, controller model: Siemens 840DSL mit ShopTurn, TECHNICAL DETAILS Swing diameter over bed: 600 mm Distance between centers: 2,000 mm Turning length: 1,980 mm Spindle bore: 105 mm Speed: 2,500 rpm Power: 18.5 kW MACHINE DETAILS Bjdpfxey Ex Hme Af Rsdc Control: Siemens 840DSL with ShopTurn Number of gear stages: 2

Condition: good (used), Year of construction: 2008, Ref. -No.: 10474 Manufacturer: SPINNER Type: TC77 MCY Year of construction: 2008 Type of control: CNC Control: Siemens 840 D Storage location: Halberstadt Country of origin: Germany Machine-No.: AP0XXXXX Chuck diameter: 210 mm Tailstock - diameter: 110 mm Feed speed X / Z: 15/24 mm / min Turning Diameter: 500 mm Max. Torque: 113 Nm Travel -X Axis: 350 mm Travel -Y Axis: 230mm (-110mm +120mm) mm Travel -Z Axis: 1160 mm Distance Between Centres: 800 mm Spindle 1 spindle head diameter (flange): A8 mm Spindle 2 spindle head diameter (flange): A6 mm Quills Morse taper: MK4 Turret places: 12 Pcs Machine length: 3250 mm Machine width: 1980 mm Machine Height: 2090 mm Weight Of The Machine Ca.: 7,5 t Max. swing diameter: 690 mm Bdedpey Ed Ebsfx Af Rjc Further information: Spindle head: A8 Bar capacity: 77mm Bar capacity: 52mm Number of rotating tool positions: 12 Y axis + C axis. Machine can be inspected under power by arrangement.

Condition: good (used), Year of construction: 1999, Ref. -No.: 10443 Bdedpjy Ed Ddjfx Af Rsc Manufacturer: VDF BOEHRINGER Type: 16 M - G Year of construction: 1999 Type of control: CNC Control: REXROTH INDRAMAT SYSTEM 200 BTV 30 Storage location: Halberstadt Country of origin: Germany Turning Diameter: 520 mm Turning Diameter Over Slide Rest: 150 mm Spindle Speeds: 25 - 4.500 RPM Spindle Bore: 78 mm Tool Taper: VDI 40 Rapid Traverse: 15.000 mm / min Distance Between Centres: 1110 mm Spindle motor drive: 18 kW Turret places: 12 Pcs Machine length: 5000 mm Machine width: 2800 mm Machine Height: 3200 mm Weight Of The Machine Ca.: 14,5 t Further information: 2x revolver (12 places) Machine can be inspected under power by appointment.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Nice Microcut Challenger lathe turning over bed 550 mm in gap 770 mm over slide 320 mm Center length 1500 mm Control Siemens 810D Chip conveyor Coolant equipment Multifix toolpost with 10 holders Fixed steady Bdodoy D Taljpfx Af Roc Travelling steady 3 jaw chuck manual All manuals present

Condition: excellent (used), Year of construction: 2012, Control: Fanuc 0i-TD Equipment: Bsdpfx Afsy Dqb Tj Rsdc - various tool holders - various driven tools - C-axis, driven tools Max. turning diameter: Ø 500 mm Max. turning length: 600 mm Bar capacity: Ø 75.5 mm Spindle speed: 3500 rpm Spindle nose: A2 - 8 Machine weight: 6,700 kg

Condition: good (used), For sale: High-performance dual-spindle CNC lathe Biglia B.750-YS. This versatile machine combines power and precision at a millimeter scale, ideal for complex machining of medium and large workpieces. Brand: BIGLIA Model: B.750-YS (with Y-axis and sub-spindle) Year: 2020 Control: Fanuc Series 32i-B with Dual Check Safety Key features: Bdodoy Dpu Sspfx Af Rjc Bar capacity: Ø 80 mm (maximum capacity Ø 93 mm) Maximum turning diameter: 552 mm Turret: 16 driven stations (speed 6,000 rpm) with direct-drive integrated motor for increased accuracy Travel: X=305 mm, Y=140 mm (+/- 70), Z=860 mm

Condition: used, Year of construction: 2017, controller manufacturer: Siemens, controller model: 840Dsl, _____ Description: Year of manuf. : 2017 Control : Siemens 840Dsl Turning diam. : 500 mm Turning length : 800 mm Mainspindle: Technology:Motorspindle Speed:4.000 rpm Power (max.):29 kW Torque (max.):250 Nm Bdodpfx Afey A U Izo Roc Barcapacity:76 mm Subspindle: Technology:Motorspindle Speed:5.000 rpm Power (max.):29 kW Torque (max.):250 Nm Ejector:Pneumatic Movement in Z:800 mm Toolcarrier I (X/Y/Z): Technology:Turret with 12 stations Taper:VDI30 Tooldrive:5.000 rpm, 6,7 kW, 25 Nm Movement in X/Y/Z:260/100/800 mm Eilgang in X/Y/Z:30/12/30 m/min Toolcarrier II (X/Z): Technology:Turret with 12 stations Taper:VDI30 Tooldrive:5.000 rpm, 6,7 kW, 25 Nm Movement in X/Z:210/800 mm Eilgang in X/Z:30 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with paperbeltfilter and High-pressure, 40 bar Rawmaterialfeed I:Robotinterface prepared Rawmaterialfeed II:Barloaderinterface prepared Finishedpartremoval:Workpiece unloading device with conveyor belt Oilmistseparation:Interface prepared Toolholder:Misc. static and driven toolholder Further Accessory:Automatic Door, Rinsing pistol

Condition: like new (used), Year of construction: 2018, turning diameter over cross slide: 520 mm, turning length: 1,500 mm, turning diameter: 500 mm, spindle bore: 110 mm, spindle speed (max.): 2,000 rpm, rapid traverse X-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, bar passage: 110 mm, Equipment: documentation/manual, CNC LATHE COMEV PICODUE EVO 260×1500 – Year 2018 – Operational – Turin (TO) Flat-bed CNC lathe COMEV Picodue EVO, model 260×1500, year 2018 (serial number 8051), in good condition and fully operational. One-piece cast iron construction with induction-hardened and hand-scraped prismatic guideways. High-quality Italian manufacturing. Available for inspection and testing by appointment in Turin. Main technical specifications: • Max swing over bed: 520 mm • Max turning diameter: 260 mm • Max swing over carriage: 285 mm • Distance between centers: 1,500 mm • Spindle bore: Ø 110 mm • Spindle nose: Cam Lock 8" (A2-8") Bjdpfx Afsy A Type Redc • Spindle speed: 0 – 2,000 rpm (stepless) • Motor power: 12.5 kW (16.8 kW peak) • Rapid traverse X / Z: 10 / 10 m/min • Precision ground and preloaded ballscrews: ISO 5 – zero backlash • RAPID Original quick-change turret – 4 positions • CNC control: Z32 Delectron / COMEV • 15" color touchscreen display • ISO / conversational / teach-in programming • Connectivity: USB – network – remote diagnostics • 2 controlled axes: X – Z • CE compliant | Year: 2018 Machine available for inspection and testing by appointment.

Condition: used, Year of construction: 2022, machine/vehicle number: L2E0253, CNC lathe Bdjdpfx Aey Axr Ref Rsc

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 10 h, functionality: fully functional, Equipment: documentation/manual, 🔷 TOPNC HMT-i500 – 5-Axis Turn-Mill Center Demo Machine – As New – Available at Short Notice – German Service For sale is a high-precision 5-axis turn-mill center TOPNC HMT-i500, used exclusively as a demo machine and in mint condition. This machine combines turning and 5-axis milling in a single setup – for maximum efficiency, precision, and reduced cycle times. ⚙️ Technology Concept ✅ 5-axis simultaneous machining ✅ Complete machining in one setup ✅ Torque motor direct drive (B-axis) ✅ Fully closed control loops (linear encoders) ✅ High rigidity machine structure (monolithic design) ✅ Thermally stable machine construction 👉 Result: highest accuracy + minimal non-productive times + maximum process reliability 📊 Technical Data (Excerpt) 🔹 Machining Max. machining diameter: 500 mm Max. turning length: 800 mm Bar capacity: Ø 74 mm Travel (X/Y/Z): 500 / 200 / 850 mm 🔹 Milling Spindle Speed: 12,000 rpm Power: 22.2 kW Torque: 45 / 54 Nm Bodpsyywgbsfx Af Redc Taper: HSK-T63 Through-spindle coolant: Standard 🔹 Turning Spindle Speed: 3,000 rpm Power: 30 kW Torque: 280 / 420 Nm Chuck size: 10" 🔹 B-Axis (Swivel Head) Swivel range: 240° Direct drive (torque motor) Torque: 360 / 685 Nm Holding torque: 1,500 Nm 🔹 Dynamics & Precision Feed rate X/Y/Z: 30 / 30 / 36 m/min Resolution: 0.001 mm / 0.001° 🔹 Tool Magazine Capacity: 24 tools Max. tool length: 300 mm Max. tool weight: 7 kg 🔹 Machine Dimensions: approx. 6000 x 2400 x 2300 mm Weight: approx. 8 t 👉 All data according to technical datasheet 🧠 Equipment & Features High-precision ball screws & linear guides Fully automatic central lubrication system High-pressure coolant + through-spindle coolant Chip conveyor + coolant system Tool measuring system & workpiece probe (optionally integrated) Automatic door Oil mist extraction Servo tailstock 👉 Designed for continuous industrial operation 🖥️ Control TOPNC rocOS (5-axis simultaneous) or Siemens SINUMERIK 840D sl 👉 Industry standard for demanding applications 🏭 About TOPNC / VECTRIX TOPNC Shanghai is one of the leading CNC manufacturers in China in the field of 5-axis and mill-turn technology. 👉 Represented in Europe by the VECTRIX Group GmbH 🇩🇪 German headquarters & service in Nordenham ✔️ Spare parts & technicians available in Germany ✔️ Fast response times ✔️ Long-term support 👉 No risk – structured industrial support in Europe 💡 Why this machine? Demo machine = as new + price advantage Immediately available – no lead time Fully equipped Perfect for demanding manufacturing (aerospace-ready, medical technology, etc.) 💰 Price List price: €455,000 👉 Special price for demo/stock machine: approx. €355,990 incl. installation Location: Germany Machine can be inspected under power We are happy to send you: Videos & machining examples Individual ROI calculation Technical consultation 👉 Inquire now – these machines are off the market quickly

Condition: used, OKUMA LB 200 M is a CNC turning lathe for high‑precision machining, accuracy and reliable operation. Capacities: turning Ø over cross‑slide 420 mm; swing over bed 530 mm; spindle hole 53 mm; max Ø 300 mm; travels Z 335 mm, X 180 mm. Specs: rapid traverse X 25 m/min, Z 30 m/min; spindle speeds 50–6000 t/min; 3x400 V 50 Hz; total power 16 kVA; weight ≈3300 kg; dims 2035×1720×1700 mm. Equipment: 12‑position fixed‑tool turret; tailstock Morse 4, spindle stroke 80 mm, Ø 55 mm. Enables tight tolerances; typical sectors: automotive, aerospace, medical, machine building. Bdedoyxnxxjpfx Af Roc

Condition: new, Centre height: 260 mm Centre distance: 1000 mm Swing diameter over bed: 520 mm Swing diameter over cross slide: 265 mm Bed width: 320 mm Spindle bore: 62/110 mm Spindle mount: Camlock 6/8" Bodpjyxb Dnefx Af Rodc Spindle speed range: 0 - 2000 rpm Spindle power: 10.7 kW Rapid traverse X/Z: 3 m/min Feed force X: 250 daN Feed force Z: 500 daN Dimensions (L x H x D): 2532 x 1506 x 1790 mm Weight: 2150 kg

Condition: good (used), Year of construction: 1987, operating hours: 25,000 h, functionality: fully functional, turning diameter over cross slide: 550 mm, turning length: 1,000 mm, turning diameter: 400 mm, spindle bore: 90 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 10 rpm, spindle motor power: 22,000 W, total length: 4,510 mm, total width: 2,370 mm, quill stroke: 150 mm, overall weight: 9,500 kg, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Well-maintained LC40 for sale. The machine is powered and available for inspection. 12-position turret. Includes: 2 pcs. 3-jaw chucks, 240/330mm, various tools and accessories (see pictures), measuring probe, Mayfran chip conveyor. Bdjdpfx Asyvulgsf Roc