CHZ-Blechtechnik GmbH

Condition: used, functionality: fully functional, Year of construction: 1997, Used Safan guillotine shear Type: VS 255 4 Capacity: 2550 x 4 mm Electrically adjustable backgauge Nodpfoxzf Slsx Af Iewp Manual adjustment of cutting angle and blade gap

Condition: ready for operation (used), Year of construction: 1978, Available immediately from location: LVD Hydraulic Guillotine Shear Nsdsxy N T Rjpfx Af Iowp Type MVS 62/4 Year of manufacture 1978 Cutting length 6200 mm Material thickness 4.0 mm Digital backgauge 750 mm Drive 12.5 kW Weight 7500 kg Price: €5,500 plus VAT, ex location

Condition: like new (used), functionality: fully functional, Year of construction: 2018, operating hours: 54 h, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, overall weight: 3,550 kg, Hydraulic shear for longitudinal and cross cutting of sheet metal for sale. Suitable for sheets up to 0.8mm thick and up to 1250mm wide. Digital control – numerical definition of cutting length and number of pieces. The machine is as new! Nwsdpfx Afoxv Sfhs Iop

Condition: used, functionality: fully functional, Year of construction: 1981, control type: PLC-controlled, Hydraulic Guillotine Shear Manufacturer: EHS Type: 13-31 Year of manufacture: 1981 Factory No.: 18443 Technical Data: Max. shearing capacity: 13mm up to 440N/mm² Max. cutting width: 3050mm Blade length: 3100mm Free passage: 3070mm Backgauge adjustment: 10–1000mm Cutting angle adjustment: 1°–4° Corresponds to a cutting capacity of 2–13mm Max. hydraulic system pressure: 300 bar Nwsdpfjxu D Rmjx Af Isp Hold-down system pressure: 80 bar Return system pressure: 130 bar Nitrogen pre-charge in hydraulic accumulator: 100 bar Oil tank capacity: 300 liters Operating voltage, three-phase: 380V 50Hz Control voltage: 220V Total connected load: 16kW Total rated current: 32A Rated current for main fuses: 50A Total weight: 7800 kg

Condition: used, functionality: fully functional, control type: PLC-controlled, Hydraulic Press Brake EHT CNC Manufacturer: EHT Model: EHS 13 - 31 Cutting length: 3100 mm Material thickness: 13 mm Press capacity: 110 tons Nwodpfxjxu Dyue Af Isp Backgauge (parallel backstop) Control: Cybelec Upper tool set segmented (also suitable for manufacturing small boxes) Lower tool: Multi V die 4 axes: Y1, Y2, crowning in the table for dimensional accuracy, backgauge Front stops Condition: good used

Condition: used, functionality: fully functional, Year of construction: 1985, working width: 1,050 mm, sheet thickness steel (max.): 4 mm, back gauge adjustment: motor-driven, back gauge: 1,000 mm, power: 7.5 kW (10.20 HP), overall weight: 2,300 kg, Capacity: 1050 x 4 mm. Backgauge: Motorized. 1000 mm. Nodpjxr U Siofx Af Iowp Adjustable cutting length: Yes. Adjustable blade gap: Yes. Motor: 7,5 kW. Year: 1985 Country of origin: Denmark/Germany. Size (L x W x H): 1550 x 3050 x 1750 mm. Weight: 2300 kg. With squaring arm and 2 support arms. Very good condition. All our machines are tested and serviced before delivery.

Condition: good (used), functionality: fully functional, Year of construction: 1998, working width: 4,000 mm, Used Fasti press brake 200 ton x 4000 mm, year 1998, with extensive tooling. Hydraulic clamping of the upper tool – Delem control – 6-axis. Nodsxr Aynspfx Af Ijwp

Condition: good (used), Year of construction: 1991, sheet width - max. 1010 mm plate thickness 4.0 mm ST Nwedpsxrgv Tofx Af Isp plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded max. 20 Hübe/min cutting angle 1.5 ° work height max. 900 mm Control ELGO total power requirement 5.5 kW weight of the machine ca. 2200 kg. range L-W-H 1500 x 2155 x 1606 mm from a maintenance workshop good condition (!!) - in checked conditions - machinevideo - ?v=w22S17mfU-A Equipment: - Robust NC electro-hydraulic guillotine shear - NC electro-motorized backgauge * Includes NC ELGO positioning control "TYP 85" - Electric cutting length limiter - Manual cutting gap adjustment - 1x side stop with scale - 2x support arms - 1x freely movable foot switch - Original operating instructions * Special accessories included: - Pneumatic holding device for thin sheet metal blanks

Condition: used, functionality: fully functional, Year of construction: 1997, Used guillotine shear by Safan Nwodjxrf Hwepfx Af Ijp Type: VS 255 4 Capacity: 2550 x 4 mm Electric back gauge with NC control

Condition: used, functionality: fully functional, Year of construction: 1992, controller manufacturer: Nuova, controller model: PRG 911., working width: 2,000 mm, sheet thickness steel (max.): 4 mm, back gauge adjustment: motor-driven, overall weight: 3,100 kg, Capacity: 2000 x 4 mm. Backgauge: Motorized, Nuova PRG 911. Adjustable blade angle: Yes. Adjustable cutting length: Yes. Adjustable blade gap: Yes. Nwedpfx Afjxpf Rdo Ijp Year: 1992 Country of origin: Germany. Size (L x W x H): 2750 x 3800 x 1700 mm. Weight: 3100 kg. With sheet support, sheet conveyor, squaring arm, 2 support arms and extra blades. All our machines are tested and serviced before delivery.

Condition: used, functionality: fully functional, Year of construction: 1989, working width: 1,250 mm, sheet thickness steel (max.): 4 mm, overall weight: 2,600 kg, Capacity: 1250 x 4 mm. Backgauge: Manual, 500 mm. Adjustable blade angle: Yes. Adjustable cutting length: Yes. Adjustable blade gap: Yes. Motor: 7,5 kW. Year: 1989 Country of origin: Denmark. Size (L x W x H): 1850 x 1600 x 1800 mm. Nwsdpfxsxpf Hrs Af Ijp Weight: 2600 kg. Special machine for thin plates. With new 500 mm. manual back gauge, pneumatic plate holddowns, plate seperator, adjustment of pressure on hold downs and 2 movable support arms with rulers and flipstops. All our machines are tested and serviced before delivery.

Condition: good (used), sheet width 2540 mm plate thickness 4.0 mm thickness at "Niro-steel" 3.0 mm 9.0 St. back stop - adjustable 100 mm/sek cutting angle 1° 20 table height 855 mm table depth 500 mm no. of strokes 33 - 55 Hub/min 0 max. 250 bar engine output 5.5 kW weight of the machine ca. 5000 kg. range L-W-H 2960 x 1990 x 1700 mm From a maintenance workshop Good / well-maintained condition (!!) Equipment: - Powerful electro-hydraulic guillotine shear Nwjdpfx Aexn Tx Hef Iep - AMADA NC control unit * Pivoting control panel, front left - NC electro-motorized material backgauge * Backlash-free ball screw - Manual cutting gap adjustment with 2 levers - 1x long side stop - 1x support arm - Rigid welded machine body - Sighting device with three mirrors (cutting according to marking) - Front safety guard (finger protection) - 1 freely movable foot switch - Operating instructions (PDF) * Special accessories included: - Sheet metal holding device for thin sheet metal blanks

Condition: good (used), functionality: fully functional, LVD Plate Shear MV 31/3.5 – 3100 × 3.5 mm – Guillotine Shear Manufacturer: LVD Company, Gullegem (Belgium) Nodpfxexmvl Ts Af Iswp Model: MV 31/3.5 Max. cutting length: 3100 mm Max. sheet thickness (steel): 3.5 mm Drive system: hydraulic Backgauge: electric, 750 mm Machine weight: approx. 4,000 kg Dimensions: approx. 4000 × 1800 × 1600 mm LVD guillotine shear, Model MV 31/3.5, suitable for cutting steel sheets up to 3.5 mm thick over a width of 3,100 mm.

Condition: excellent (used), Year of construction: 2001, In goed werkende staat verkerende gebruikte 3 meter plaatschaar van Safan. Type: HT 310x4 Nsdpfxjxlf Ino Af Iewp Capaciteit: 3100 x 4 mm Touch screen besturing Automatische plaatdikte en hoek instelling

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2025, operating hours: 10 h, machine/vehicle number: SO151002, sheet thickness (max.): 3 mm, warranty duration: 36 months, cutting length (max.): 1,500 mm, lateral stop: 1,000 mm, Equipment: CE marking, angle stop, documentation/manual, emergency stop, finger protection, foot remote control, Electric guillotine shear ShearOne E1500x3 CoastOne - Made in Finland Nsdoxd U D Aspfx Af Ijwp Electric guillotine shear ShearOne 15 - Made in Finland 1500mm x 3mm TC15 touchscreen control - Sheet metal holding - Automatic cutting gap adjustment

Condition: excellent (used), functionality: fully functional, Cutting length: 2520 mm Sheet thickness at 400N/mm²: 4.0 mm Strokes per minute: 47 Back gauge approx.: 750 mm Throat depth: 350 mm . Very good original condition! . Equipment: Left side gauge, 750 mm Cutting gap adjustment Nwedpfx Afsxd Dyge Iop Back gauge with vernier scale and magnifier (and light) Overload protection . Other: Both blades are sharp and have not yet been shimmed The cylinders are dry

Condition: used, Year of construction: 1985, sheet width 3100 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.5 mm cutting angle adjustment 1.0 ° back stop - adjustable 10 - 1000 mm adjustment speed 180 mm/s down holder 21 Stück strokes per minute 18 - 31 oil volume 160 L Control ELGO P8511 column arm 200 mm distance between columns 3050 mm Nwedpfx Aoxab Tvjf Isp 0 max. 300 bar voltage 400 V main drive 9.0 kW weight of the machine ca. 4800 kg. dimensions of the machine ca. 3660 x 2070 x 2140 mm from a maintenance workshop Equipment: - electro-hydraulic sheet metal shear "swing cut" - machine frame = all-steel welded construction - ELGO NC control model P8511, control panel at the front left * for positioning the electro-motoric rear stop * target/actual position value input possible * adjustment by three-phase motor via toothed belt - support table with ball rollers * there are recessed grips between the table plates - front finger guard - hydraulically acting sheet metal hold-down device - 1x freely movable foot switch - emergency stop button at the front - movable scrap switch - original operating instructions + circuit diagram Special accessories included: - EHT pneumatic sheet metal holding device for thin sheet metal cuts - 1x EHT extra long side stop 3.000 mm with mm scale & support foot - 1x EHT extra long support arm with 3.000 mm with scale & Support foot - EHT additional support arms with mm scale

Condition: used, Year of construction: 1981, sheet width - max. 2535 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded 20 Hub/min cutting angle 1.7 ° work height max. 900 mm total power requirement 8.5 kW weight of the machine ca. 3400 kg range L-W-H 2916 x 2250 x 1760 mm Machine from training workshop good / well-maintained condition (!!) Equipment: - robust electro-hydraulic "swing cut" guillotine shears - electro-motorized rear stop - electric cutting length limiter - electro-motorized cutting gap adjustment - front support table including recessed grips - 1x stable side stop, with scale and tilting cam - 3x stable, front support arms - 1x freely movable foot switch - front finger guard - EMERGENCY STOP button at the front - operating instructions Nodpfx Afoxabvqj Iswp * Special accessories included: - pneumatic sheet holding device for thin sheet metal cuts

Condition: used, Year of construction: 1990, plate width 2503 mm Nwedpexabd Uefx Af Iop plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded 15 - 20 Hübe/min cutting angle 1.7 ° work height max. 900 mm Control ELGO TYP 85 total power requirement 8.5 kW weight of the machine ca. 3400 kg range L-W-H 2913 x 2250 x 1760 mm Features: - Robust NC electro-hydraulic guillotine shear - NC electro-motorized backgauge * with ELGO control unit - Manual cutting gap adjustment - Front support table including recessed grips - 1x sturdy side stop with scale and tilting cam - 2x sturdy front support arms - 1x freely movable foot switch - Front finger guard - Front emergency stop button - Operating instructions (PDF)

Condition: used, Year of construction: 1982, sheet width - max. 1255 mm plate thickness 4.0 mm ST Nodpfx Afoxaa I Ss Iewp plate thickness 2.0 mm VA plate thickness 6.0 mm ALU number of strokes - loaded ~ 66 Hübe/min. cutting angle 1.5 ° total power requirement 5.5 kW weight of the machine ca. 2600 kg. range L-W-H 1750 x 1800 x 1800 mm Machine from a technical college - prototype construction very well-maintained condition (!!) Furnishing: - electro-hydraulic guillotine shears - manual backgauge with analogue position display (scale + magnifying glass) - electrical cutting length limitation - manual cutting gap adjustment - 1x extra long side stop - 2x extra long support arms - 1x free moving footswitch - rear sheet metal slide - User manual (PDF) * Machine link : ?machineno=1008-9325278

Condition: excellent (used), functionality: fully functional, Year of construction: 1994, EHT hydraulic guillotine shear type TSS 3-40, working width 4100 mm, max. sheet thickness 3.0 mm, pneumatic sheet support device, NC controlled backgauge, support arms, extra set of blades. Nedjw Uf Nrepfx Af Iewp

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1995, working width: 6,500 mm, sheet thickness (max.): 3 mm, overall weight: 15,000 kg, TECHNICAL DETAILS Sheet width: 6500 mm Sheet thickness: 3 mm Nwedpfxsw Suxkj Af Iop Back gauge – adjustable: 1000 mm MACHINE DETAILS Weight: approx. 15,000 kg Dimensions: 7500 x 3000 x 2500 mm EQUIPMENT - 1 x set of knives

Condition: good (used), functionality: fully functional, Year of construction: 1983, We are selling a used guillotine shear from the manufacturer Digep DLB 4 3050. The machine is fully operational, connected to power, and fitted with sharp blades. Nwedpfxjw Rdzle Af Iep Technical specifications: - Sheet thickness: 4 mm - Sheet width: 3050 mm - Machine dimensions: 3.7 x 2.1 x 1.4 m - Machine weight: approx. 4.65 t The price is ex works loaded at the location in Werdau.

Condition: used, functionality: fully functional, working width: 2,500 mm, sheet thickness (max.): 4 mm, Guillotine Shear NTC 2500/4 Nwodpow N E Rrofx Af Ijp

Condition: used, Max. cutting length: 4040 mm Nwjdjw Hygdopfx Af Isp Max. sheet thickness: 4 mm steel Motorized adjustable backgauge with digital display up to 1000 mm Pneumatic sheet metal holding Side stops and table extensions cutting length limitation Cutting edge lighting Weight approx. 7500 kg