Metallbau KEYA

Condition: used, Year of construction: 1980, voltage 50 V frequency 50 Hz Iedpfxex U A Slo Ahusht ampere 3,7 A 21882 speeds: 3

Condition: like new (used), Year of construction: 2018, 2018 Schmid SE 349-2 Vertical Drilling/Tapping Machine with Siemens 840D Control (New/Unused, In Shipping Crates) - Note: Images are for reference only. The machine is a new 2018 model and remains unused in its original shipping crates in offsite storage. Photos shown are of the same model for illustration purposes only. With 6 Jaw Ø4,300mm Chuck. Maximum Workpiece Ø4,000mm. Axis Travel 'X1'=600mm, 'X2'=600mm, 'Z1'=1,000mm, 'Z2'=1,000mm. Rapid Traverse 'X1'=30m/min, 'X2'=30m/min, 'Z1'=30m/min, 'Z2'=30m/min. Minimum Distance Between The Rams 1,200mm. Ram Dimension 450 x 450mm. Spindle Taper HSK 100. Maximum Spindle Speed 4,000rpm (63kW Motor). Torque (S6-40% ED) Nm 859. 36 Vertical Position ATC, 10 Horizontal Position With Dual Right Angle Heads. With Automatic Doors, Knoll High Pressure Paper Filtration Coolant System, Dual Chip Conveyors, Schimpke Chiller Unit, Weight 30,000kg. Isdpfx Ahsx Swv Heueht

Condition: used, Year of construction: 1989, spindle tunring speed 1.750 U/min Ihodpfox R U Scjx Ahuot

Condition: used, Year of construction: 1970, taper MK 4 feeds: ja weight of the machine ca. 1,5 t Ihodpfx Ahoxzu Dqeuot

Condition: good (used), Hello, For sale: RF-50/1250 radial drilling machine. The machine is in working condition, currently in continuous operation, and can be inspected and tested on site. Ijdpfx Ahoxykctjuoht The price listed in the advertisement is net and VAT must be added. The machine can be viewed in Starachowice at 13 Kwiatkowskiego Street. Telephone contact available from 7:00 to 16:00.

Condition: excellent (used), Column drilling machine by WMW, type BK32AI, circa 1970. Control type: conventional. Technical Details: - Drilling capacity in steel (diameter): 32 mm (cast iron Ø 50 mm) - Throat depth: 315 mm - Quill stroke: 200 mm - Spindle taper: MK4 - Spindle speed range: 30...1000 RPM / 9 steps - Feed, stepless: 0.8 - 1.25 mm/rev, fine feed 0.25 - 0.4 mm/rev - Quill adjustment: 280 mm - Thread cutting: max. M 24 - Distance spindle to table: max. 710 mm - Table clamping area (L x W): 450 x 560 mm - Distance spindle to base plate: max. 1180 mm - Clamping area of base plate: 660 x 660 mm - Total power requirement: 3.2 kW - Machine weight approx.: 1.0 t - Machine dimensions (LxWxH): approx. 1.1 x 0.7 x 2.6 m Isdsxyh Rzopfx Ahusht Technically flawless. Can be inspected at any time. Loading and transport not a problem.

Condition: used, Workbench Column Drilling Machine FLOTT type 16 STG/R2 Spindle: CM2 Spindle exit: 100 mm Spindle speed: from 80 to 2000 RPM Table size: Length 340 mm x Width 280 mm Maxi distance spindle nose/table (lower table): 400 mm Throat depth: 240 mm 2 speed motor 2,2 kW Drilling/tapping function Adjustment by belt variator Electronic RPM speed not working Voltage: 380 V Width: 500 mm Ijdpjxx Tncefx Ahujht Depth800 mm Total height: 1100 mm Weight: approx 150 kg

Condition: used, Year of construction: 1997, Workbench Column Drilling Machine CINCINNATI PE 32 Year of construction: 1997 Spindle: CM3 Spindle exit: 150 mm Spindle speed: from 100 to 3800 RPM Table travel X: 290 mm / Travel Y: 150 mm Speed variator by belt variator Maxi height base/spindle nose: 500 mm Mini height base/spindle nose: 260 mm Throat depth: 300 mm Isdpfxsxx Nyze Ahusht Spindle sleeve diameter: Ø 80 mm Equipped with one cross table dimensions: L 430 x W 240 mm Voltage: 380 V Width: 900 mm Depth: 1100 mm Total height on base: 2000 mm Weight: approx 400 kg

Condition: excellent (used), Year of construction: 1985, Column Drilling Machine ALZMETALL AX2 Cone: CM2 Spindle exit: 100 mm Ijdpfx Asxu H T Dohujht Rotation: from 200 to 500 RPM Table size: Length 370 mm x Width 350 mm Year of construction: 1985 Maxi distance spindle nose/table: 480 mm Throat depth: 250 mm 2 R5247921 speeds motor Voltage: 380 V Width: 500 mm Depth: 900 mm Total height: 1700 mm Weight: approx 250 kg

Condition: new, mount diameter: 50 mm, clearance between the columns: 375 mm, spindle mount: MK 4, total height: 2,450 mm, total width: 1,020 mm, total length: 610 mm, table width: 600 mm, table length: 600 mm, overall weight: 820 kg, quill stroke: 230 mm, Column Drill Maximum drilling capacity Ø 50 mm Spindle holder MK 4 Spindle speed min. 54 rpm Spindle speed max. 2.090 rpm Iedpfxexu H Eyj Ahujht Stroke of the drill pinole 230 mm Distance column to drilling center line 375 mm Drilling table size 600 x 600 mm Length 610 mm Depth 1020 mm Height 2450 mm Weight 820 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: new, mount diameter: 40 mm, clearance between the columns: 350 mm, spindle mount: MK 4, total height: 2,220 mm, total width: 930 mm, total length: 560 mm, table width: 560 mm, table length: 560 mm, overall weight: 465 kg, quill stroke: 180 mm, spindle speed (max.): 1,450 rpm, spindle speed (min.): 50 rpm, Column Drill Maximum drilling capacity Ø 40 mm Spindle holder MK 4 Spindle speed min. 50 rpm Spindle speed max. 1.450 rpm Stroke of the drill pinole 180 mm Distance column to drilling center line 350 mm Drilling table size 560 x 560 mm Length 560 mm Depth 930 mm Height 2220 mm Weight 465 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Iodpfxsxu Hp Es Ahuoht Feel free to view our other advertisements for a complete overview of our stock.

Condition: new, spindle mount: MK 4, total height: 2,220 mm, total width: 930 mm, total length: 560 mm, table width: 560 mm, table length: 560 mm, overall weight: 465 kg, quill stroke: 180 mm, drilling capacity: 40 mm, Equipment: type plate available, Maximum drilling capacity Ø 40 mm Spindle holder MK-4 Spindle speed min. 50 rpm Spindle speed max. 1.450 rpm Stroke of the drill pinole 180 mm Distance column to drilling center line 350 mm Drilling table size 560 x 560 mm Iodoxu Hnujpfx Ahusht Length 560 mm Depth 930 mm Height 2220 mm Weight 465 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 7694, table width: 250 mm, table length: 300 mm, overall weight: 200 kg, spindle speed (max.): 1,420 rpm, No reserve price – guaranteed sale to the highest bidder! Ihsdpoxqntksfx Ahujt The machine is being auctioned due to a business liquidation. Placing a bid obliges the buyer to collect the machine on time between 26.01.2026 and 29.01.2026! TECHNICAL DETAILS Spindle speed: 160 to 1,420 rpm Table dimensions: 300 x 250 mm Number of T-slots: 2 MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 700 x 450 x 1,900 mm Weight: 200 kg

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 10100, table width: 300 mm, table length: 400 mm, spindle speed (max.): 1,400 rpm, drilling depth: 150 mm, No reserve price – guaranteed sale to the highest bidder! The machine is being auctioned due to company closure. Placing a bid obliges timely collection between 26.01.2026 and 29.01.2026! TECHNICAL DETAILS Spindle speed: from 200 to 1,400 rpm Drilling depth: up to 150 mm Table dimensions: 400 x 300 mm Slots: 2 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 800 x 600 x 1,900 mm Weight: 300 kg Iodpfjxqdw Esx Ahueht

Condition: ready for operation (used), functionality: fully functional, spindle mount: MK 3, total height: 1,800 mm, total width: 500 mm, total length: 600 mm, table width: 500 mm, table length: 355 mm, spindle speed (max.): 3,020 rpm, spindle speed (min.): 100 rpm, type of input current: three-phase, Equipment: type plate available, 3 Phase 380V, 2 speed motor is running fine! Geared head with 8 speeds. Spindle RPM adjustable from 100 up to 3020. MT3 spindle taper. Tool ejector. Maximum drilling depth: 130 mm Table size: 500x355 mm Ihedpjxl Hpajfx Ahuet Head & table height adjustable. Good working condition! Made in Sweden. Overall dimensions: 60x50x180 cm Contact us for shipping possibilities! € 1,850.00 EX VAT!

Condition: ready for operation (used), Year of construction: 1967, functionality: fully functional, Infratirea pillar drilling machine / bench drill Includes the drill bits (see picture) and a large machine vice. Isdpfx Asw S Udmshuoht Year of manufacture: 1967

Condition: used, Year of construction: 1980, taper MK 4 serial number 520 weight of the machine ca. 440 kg Ijdpfxew Sydlj Ahujht

Condition: used, Year of construction: 1986, bore capacity in steel (diameter) 32 mm Ihsdpsw En D Iefx Ahujt throat 290 mm bore stroke 180 mm total power requirement 1,9 kW Description to follow!

Condition: good (used), functionality: fully functional, mount diameter: 80 mm, throat depth: 200 mm, spindle mount: MK 1, table width: 320 mm, table length: 250 mm, stroke length: 70 mm, type of input current: three-phase, rotational speed (max.): 1,800 rpm, Equipment: lighting, type plate available, Drilling machine, drilling machine, stand drilling machine, column drilling machine -Manufacturer: Webo, G6 column drilling machine -Motor: 0.75kW 380v 50 Hz morse MK-1 chuck max drill size: M6 -Gearbox: with flat belt coolant pump automatic-manual operation spindle speed per minute -Table size: 320 x 250 mm -Spindle stroke: 70 mm -Reach: 200 mm -Column Ø: 80 mm Ihodpowzaqxjfx Ahuot -Dimensions: 450/600/H1800 mm -Weight: ca 190 kg

Condition: ready for operation (used), functionality: fully functional, spindle mount: MK 3, total height: 1,900 mm, total width: 600 mm, total length: 900 mm, table width: 400 mm, table length: 550 mm, overall weight: 360 kg, spindle stroke: 150 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 160 rpm, input voltage: 380 V, Equipment: rotational speed infinitely variable, type plate available, 3-phase 380V, 2-speed motor is running fine. Stepless speed adjustment thanks to variomatic spindle drive. Spindle RPM adjustable from 160 up to 2800. MT3 spindle taper. Albrecht 1-13mm drill chuck included. Chuck eject tool included. Drilling depth adjustable. Maximum drilling depth: 150mm Table size: 550x400mm Table height adjustable. Weight: 360KG Overall dimensions: 90x60x190cm Made in Germany Ihedpowy Ec Dsfx Ahust Overall good condition. Contact us for shipping possibilities! € 2,350.00

Condition: used, Column Drilling Machine CINCINNATI PTC 20 Ihedpfx Aowt N I Djhust Spindle CM3 Spindle exit: 150 mm Spindle speed: from 100 to 3800 RPM Rotating table Table size: 430 x 430 mm Throat depth: 280 mm Spindle motor: 1,5 kW Drilling/taping function Voltage: 380 V Width: 600 mm Depth: 1100 mm Total height: 1900 mm Weight: approx 400 KG

Condition: good (used), Year of construction: 2020, Drill, pillar drill, column drill, tapping machine -Manufacturer: Bernardo, Gearbox - Pillar Drill Type GB 35 Vario -Spindle mount: MK3 -Motor: 1.5 kW -Speeds: 65 - 460 rpm / 460 - 3250 rpm, continuously variable right-left rotation -Feed: 0.1/0.2/0.3 mm/rev. -Clamping table: 420 x 345 mm / swiveling -Travel: 340 mm Ihedjwrbpdjpfx Ahujt -Spindle stroke: 160 mm -Projection: 320 mm -Column Ø: 120 mm -Thread cutting device -Coolant system: 20 l/min -Dimensions: 870/560/H2340 mm -Weight: 401 kg

Condition: new, Year of construction: 2025, Thanks to its rigid structure, the drill ensures perfect drilling quality. The tilting table allows for a wide range of processing. The device is equipped with an electronic speed indicator, drilling depth indicator and a movable head. 125 mm vice included. The model is equipped with smooth regulation of spindle speed. Machine description smooth regulation of spindle speed Ijdpfswnca Aox Ahusht LED lamp work table and base equipped with T-slots solid, torsion-resistant column tiltable work table from -45° to +45° drilling depth stop with scale Technical parameters Maximum drilling diameter 25 mm Maximum handle diameter 16 mm The distance of the spindle axis from the column is 215 mm MK3 spindle cone Spindle extension 150 mm Column diameter 80 mm Motor 230 V / 50 Hz / 1100 W Gearbox YES Base dimensions 580 x 415 mm Table dimensions 356 x 356 mm Total height 1710 mm Spindle speed range (50 Hz) 180–2000 rpm Table travel range 600 mm Dimensions after packing (length/width/height) 1510 x 690 x 256 mm Weight 95 kg

Condition: used, Technical details: bore capacity in steel (diameter): 40 mm throat: 360 mm bore stroke: 280 mm Ihedpfx Aewid Uwshuet spindle taper MT: MK 5 spindle speed:: 32 - 1400 U/min feed: 0,11-1,73 mm/U connected load: 6 kW Distance spindle/table max.: 750 mm table clamping surface:: 780+650 mm drill table adjustment: verical 800 mm column diameter: Größe: 230 x 950 mm dimension machine xH: 1,1 x 0,8 x 2,8 m weight of the machine ca.: 1,5 kg for thread cutting clockwise and counter clockwise operation *

Condition: used, bore capacity in steel (diameter) 60 mm throat 400 mm Ihodpfx Ahewftt Ioujt total power requirement 4,4 kW weight of the machine ca. 1,7 t