Rollladen Bätker

1996 SAUTEREAU CONCEPT4
SAUTEREAUCONCEPT4

Call

Listing

1996 SAUTEREAU CONCEPT4 SAUTEREAU CONCEPT4

Bastogne

7,667 km

Call

Condition: used, Year of construction: 1996, Shaft diameter: 30 mm Cutting height: 125 mm Horizontal stroke: 145 mm Engine: 2.2 kW (3 hp) Upper unwinder: Tool holder length: 150 mm Tool holder diameter: 150 mm Lateral travel: +/- 30 mm Vertical stroke: 0-160 mm Engine power: 2.2 kW Lower unwinder: Tool holder length: 150 mm Tool holder diameter: 150 mm Lateral travel: +/- 30 mm Vertical stroke: 0-160 mm Engine power: 2.2 kW Independent or simultaneous vertical adjustment of the unwinders Cast iron mobile trolley Hnodpfjxg I Ugsx Afpeu Manual presser Ruler with stop Suction nozzle 3 x 150 mm + 1 x 80 mm (saw)

Pen Bank
ColomboTornado AT 150/S4 ECOMATIC

Listing

Pen Bank Colombo Tornado AT 150/S4 ECOMATIC

Waregem

7,477 km

Call

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Pen machine - saw group * saw diameter 500 mm * max. cutting width 200 mm * 2.2 kW motor Hodpfxsxd A E Uo Afpsnu - horizontal milling head above * tool diameter 200 mm * max pin length 150 mm * motor 2.2 kW - horizontal milling head bottom * diameter of the tool 200 mm * max. tenon length 150 mm * 2.2 kW motor - milling spindle * diameter of spindle 50 mm * max tool diameter 350 mm * length of spindle 180 mm * 5.5 kW motor - swiveling table +/- 60° - pneumatic pusher - stop bar max. 3000 mm - counter profile rotatable - Swinging of the stop bar +/- 45°

Listing

Waregem

7,477 km

Pen Bank
SaomadUTP 150/6

Call

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Pen machine - inclinable guide +/- 45° - 2 pneumatic pushers - saw Hjdpfxoxd A D Ro Afponu * 3 kW motor power * saw blade diam. 400 mm - pin heads * motor strength 2.2 kW * diam. heads 160 mm * heads length 150 mm * max. opening 185 mm - toupie * shaft length 190 mm * shaft diam. 50 mm * motor strength 5.5 kW * max tool diam. 320 mm

Spare parts carrier machine Weinig Unitec 10
WeinigUnitec 10

Listing

Spare parts carrier machine Weinig Unitec 10 Weinig Unitec 10

Tauberbischofsheim

7,924 km

€2,900

Dowel cutter
SchneiderSK - Z 2

Call

Listing

Germany

7,829 km

Call

Condition: used, Year of construction: 1991, Used machine Hnedpjwwxzbsfx Afpju Year of manufacture: 1991 Designed for all window tool systems up to 400 mm tool diameter Thanks to the standard braking systems (foot brake for the slot spindle, automatic electronic safety brake for the saw), the machine can be braked to a stop in just a few seconds. The protective covers for the slot spindle and cross-cut saw are designed to allow easy and convenient tool changes without the need to remove the covers themselves. The cross-cut saw can be conveniently adjusted from the operator’s position via a quick-adjust mechanism. A six-position turret head allows quick adjustment to various dimensions. The 40 mm slot spindle can be precisely adjusted in height using a conveniently positioned handwheel with 0.1 mm graduation. The robust roller table, in combination with hardened and ground guides, can be moved with minimal effort. Slot spindle motor: 5.5 kW Slot spindle speeds: 3000/4500 rpm Spindle diameter: 40 mm Clamping length: 140 mm Slot spindle height adjustment: 100 mm Extraction port: 120 mm Cross-cut saw motor: 2.2 kW Saw speed: 2,950 rpm Saw blade mount: 30 mm Max. saw blade diameter: 400 mm Max. cutting height: 125 mm Pneumatic tool clamping With Festo LAS stop Weight approx. 600 kg Availability: at short notice Warehouse location: Flörsheim

Tenoning machine
HABERKORNFZS-2

Listing

Oberkochen

8,006 km

Call

Condition: used, cut-off saw 3 KW Spindle diameter 50 mm Spindle length 300 mm Number of tools variabel St. Control CNC Dimensions (L/W/H) 2500x1700x2100 mm weight 1700 kg HABERKORN - FZS-2 Electronic Slotting Machine with Stepless Slotting Spindles and Automatic Roller Table ----- Crosscut Saw ----- Spindle Positioned at the Top Three-Phase Motor 3 KW Spindle Diameter 30 mm Speed ??2800 rpm Saw Blade Diameter 400 mm * Automatic Brake with Speed ??Monitoring * Stepless Saw Positioning with Siko Display * Guard and Extractor Hood with 100 mm Diameter Extractor Nozzle 2 Slotting Spindles 50 mm Diameter ----- Hsdpfx Afjwgwlkjpjnu Power 2 x 7.5 KW Speed ??4200 rpm Spindle Diameter 50 mm Max. Tool Diameter Approx. 360 mm Usable Length 300 mm * Both slotting spindles can be positioned via ball screw * Freely programmable 19 programs, display with function keys * Protective and extraction hood with 180 mm diameter extraction nozzle * Automatic brake with speed monitoring Studio table ----- * Swivel range +/- 65° * Automatically changing counter wood (programmable) * Pneumatic clamp * High-precision electrical degree indicator * Automatic length compensation * Counter wood at any angle setting in the cutting plane Special features ----- Continuously adjustable roller table feed Laser for workpiece positioning Manual length stop LA 2000 Length 2500 mm Extraction nozzle diameter: 2 x 180 mm for slotting spindles 1 x 100 mm for crosscut saw ----- Price of the above-mentioned machine upon request! ----- Images show the same model. Original images not yet available. (Technical specifications according to the manufacturer - no guarantee!) All prices quoted are net, plus statutory VAT.

Listing

Olsberg

7,750 km

Tenoning machine
Funk

€5,500

ONO plus VAT

Call

Condition: ready for operation (used), functionality: fully functional, Used window milling machine, fully functional (still in use, so could be inspected), cross-cutting saw, slotting spindle, profile spindle (see photos), machine individually or with tools (complete window set Leitz IV66 upgraded with sash seal, with and without rain gutter, Profile IV 78 Aigner with and without rain gutter) Hodjwgnn Aopfx Afpsnu

Tenoning machine
WEINIG051

Listing

Schwanberg

8,445 km

Call

Condition: excellent (used), Tenoning and Slotting Machine Hnedpfev Tb Hgjx Afpeu WEINIG Type 51 Pivoting studio window device with digital angle display Rolling table with automatic feed rate of 6 m/min. Rolling table length approx. 2,100 mm Pneumatic workpiece clamping Automatic countershaft change Crosscut saw Pneumatically timed 4-station turret Motor approx. 3 kW / 380/400 V / 50 Hz Saw blade diameter = 350 mm Saw blade speed 2,800 rpm Slotting spindle Diameter D = 50 mm Clamping length 320 mm Spindle motor approx. 11 kW / 380/400 V / 50 Hz Spindle speed 3,000 rpm Tool diameter max. 320 mm Length stop system Machine including operating tools Installation dimensions L x W approx. = 2700 x 2800 mm Weight approx. 2000 kg Note on used machines: • Errors in technical specifications and prior sale excepted. • Prices quoted are for pickup from the location - free shipping! • The machines have been cleaned and function-tested. • All machines are sold as seen without any warranty claims. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only respond to inquiries if you provide your address and telephone number!)

CNC Tenon Cutter
WINTERFRAMEMAKER

Listing

Leipzig

7,966 km

€22,900

Call

Listing

Gerolzhofen

7,947 km

Tenoner
MagicTyp MTP 27

€3,500

Call

Listing

Germany

7,947 km

Tenoner
LoewerZA 3000

€2,600

Call

Condition: used, Year of construction: 1984, second hand Make Löwer Type ZA 3000 Year of construction 1984 Machine no. 5485 Motor 1.5 kW motorized brakes Number of spindles 2 x vertical saw, horizontal milling cutter Clamping height 200 mm Diameter 40 mm Cross-cut saw Table size 800 mm x 350 mm Rotatable stop Stop ruler 2000 mm, Festo LAS stop system Manual workpiece clamping Extraction connection 120 mm Required space approx. 1700 mm x 1700 mm x 1600 mm Hodpfx Afovwf I Aepenu Storage location 97447 Gerolzhofen, free on truck, unpacked Handover in the current condition, as viewed, without overhaul, without guarantee and warranty

Tenoner
HirschTyp FWG - LQP 180

Listing

Gerolzhofen

7,947 km

€4,200

Call

Condition: used, used, top condition, little runcleaned, function-tested, test runmaintenance unit and switch housing renewedpneumatics completely sealedincl. adjustable mini-joint cutter 60 to approx. 95 mmmake Hirschtype LQP 180,year of manufacture approx. 1992For cross processing of mini tines and counter profilesAdjustment to 70/-70 degree bevelLength dimension at fenceWood clamping with bridge 8 barManual feed of saw and milling carriageSafety circuitElectric brake systemWood thickness max. 80 mmWood thickness min. 10 mmProfile depth max. 50 mmSawing unit:- three-phase motor 2.2 kW- spindle speed 2800 rpm- horizontal adjustment 50 mmMilling unit:- three-phase motor 4 kW- spindle speed 6000 rpm.- Spindle length 100 mm usable- Spindle diameter 40 mm- Tool diameter 180 mm- Weight 850 kg- Dimensions approx. 1700 x 1450 mmSpecial accessories:- Digital angle display, completely renewed,org. Elgo- Angle display graduation 1/10 degreeNew price approx. 20,000.00 €Storage location 97447 GerolzhofenHandover in actual condition, as inspectedwithout guarantee and warranty Hedovwfvgepfx Afpsnu

TENOMAC
SCMZapfenschneidmaschine

Listing

Hilzingen-Duchtlingen

7,991 km

€2,700

ONO plus VAT

Call

Listing

Miastko

8,027 km

Tenoning machine
Vertongen

€3,800

Tenoning machine Mini tenoning machine
Minizinkenfräse HirschMinizinkenfräse Hirsch

Call

Listing

Tenoning machine Mini tenoning machine Minizinkenfräse Hirsch Minizinkenfräse Hirsch

Wioska

8,118 km

Call

Condition: good (used), Year of construction: 1992, Mini tine cutter Hirsch type LQP 180 used For sawing For mini tines For countering For slotting Hnjdpfoumk Dkox Afpju Wood thickness min/max 50/80 mm Angle adjustment range +70/-70 degrees For cross processing of mini-joints and counter profiles. Changeover to +70/-70 degree bevel Length measurement at the stop, Wood clamping with bridge 8 bar Manual feed of the saw and milling carriage, safety circuit, electric brake system Wood thickness max. 80 mm Wood thickness min. 10 mm Profile depth max. 50 mm Saw unit: Three-phase motor 2.2 kW Spindle speed 2800 rpm. horizontal adjustment 50 mm Milling unit: Three-phase motor 4 kW Spindle speed 6000 rpm. Spindle length 100 mm usable Spindle diameter 40 mm Tool diameter 180 mm Weight 850 kg Dimensions 1600 x 1450 mm

Tenon milling machine for windows
OKOMA SF3 SFA

Listing

Tenon milling machine for windows OKOMA SF3 SFA

Sierakowska Huta

8,052 km

€6,570

Call

Condition: excellent (used), Catalog number 7382 TECHNICAL DATA tenting trolley: - electric trolley feed with smooth speed regulation - trolley adjustable at an angle - feed motor 0.46kW - table size L/W 700x450mm with extension up to 1150mm - transverse gear on the trolley - cutting length on the extendable telescope 1860mm - rotating block in the gear - 2 pneumatic clamps saw for cutting to length: - max. blade diameter 380mm - max. cutting height 110mm - blade adjustable up/down, front/back and at an angle - blade guard - saw motor 2.2kW tenting mandrel: - pneumatic mandrel stroke - mandrel adjustment up/down and stroke using knobs - max tool diameter 320mm - spindle diameter 40mm - spindle working height 220mm - spindle lock - 7.5kW motor profiling mandrel: - pneumatic mandrel stroke - mandrel adjustment up/down and stroke using knobs - max tool diameter 200mm - spindle working height 220mm - spindle diameter 54mm - spindle lock - steady rest extendable from the table - 7.5kW motor saw for cutting out glazing bead: - max disc diameter 200mm - disc hole diameter 30mm - adjustable disc front/back, top/bottom - disc cover - 2.2kW motor feed: - number of rollers 8pcs - motor approx. 0.55kW - roll size 110x50mm - 8 types of feed speed 4,6,8,10,12,15,20,30m/min - diameter of the exhaust port 60mm, 2x130mm, 110mm, 100mm - working pressure 6-8 bar - dimensions length/width/height 3600x2100x1600mm, weight about 2500kg ADVANTAGES - for window production - pneumatic mandrel stroke - trolley with electric feed - saw for cutting to length - tenoning mandrel Hedpfstx T Dxsx Afpjnu - unpainted, used machine, very good condition Net price: PLN 27,900 Net price: EUR 6,570 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Window tenoning machine
SACF4

Listing

Wysoka

8,091 km

€6,000

EXW Fixed price plus VAT

Call

Condition: excellent (used), functionality: fully functional, SAC F4 window making tenoning machine Technical condition: good, the machine is in working order. The price of the machine includes a large set of spare parts. Technical data: Min. workpiece height: 30 mm Max workpiece height: 90 mm (105-130 mm) Min. workpiece width: 30 mm Max. workpiece width: 600 mm Min. workpiece length: 200 mm (measured inside the pivots) Max. workpiece length: 3000 mm Max. tenoning depth: 130 mm Max. trimming width: 1000 mm Wave length (Wellenlänge): 320 mm Shaft diameter: 50 mm Vertical stroke: 290 mm Zero tool diameter: 300-350 mm Stumpfstoßsäge (keel saw) Horizontal stroke: 130 mm Positioning with continuous axis Tool diameter: 400 mm RPM: 3000 rpm Motor power: 3.2 kW Zapfenschneidwelle (journal cutting shaft) Motor power: 5.5 kW (7.5 or 9.25 kW) RPM: 3500 rpm Profilschneiden (profile cutting) Min. workpiece height without guide on the left side: 20 mm Max. workpiece height: 140 mm Min. workpiece width: 45 mm Min. workpiece length: 200 mm (measured inside the pivots) Wave length (Wellenlänge): 320 mm Shaft diameter: 50 mm Horizontal movement: 60 mm Vertical movement: 290 mm Tool diameter in zero position: 110-140 mm Maximum tool diameter: 240 mm First profile cutting shaft: Motor power: 5.5 kW (7.5 or 9.25 kW) Speed (clockwise and counterclockwise): 6000 rpm Second shaft for profile cutting: Motor power: 5.5 kW (7.5 or 9.25 kW) RPM: 6000 rpm Tenon cutting carriage: Work surface dimensions: 750x900 mm Motor power: 1.1 kW Working speed: 3-10 m/min Positioning speed: 45 m/min Number of splinter guard positions: 4-8 Scale positioning with continuous axis up to 3000 mm Angular guide ± 60° Saw for glass weld unit: Motor power: 2.2 kW Saw diameter: 200 mm RPM: 6000 rpm Profile milling feeding device: Motor power: 0.75 kW Feed speed (from ... to ...): 4-20 m/min Number of rollers: 16 Diameter of rollers: 145 mm Groove cutter for metal fittings (on request) Motor power: 3.3 kW (5.5 kW) Maximum tool diameter: 190 mm Spindle diameter: 30 mm Hnodpfxsrzvkcs Afpju RPM: 6000 rpm Horizontal movement: 70 mm Vertical movement: 40 mm Hydraulic power: 0.25 kW Weight: 4300 kg

Tenoning cutting drilling finger joint
BalestriniI2F

Listing

Tenoning cutting drilling finger joint Balestrini I2F

Kežmarok

8,564 km

€3,000

Call

Condition: good (used), Year of construction: 1990, I sell the combined tenonging machine with drilling head BALESTRINI I2F 1 tilting table with pneumatic material pressure. Automatic cutting saw from bottom. Tenoning milling head able to do the finger-joint as well. Drilling head for dowel holes production 3 spindles. Revolving 360° enabling any position. Hsdjhw Dfnjpfx Afpenu Feeding automatic. Positioning on end-sensors. Available immediately.

Window milling tool
VIVALDIØ 195 x 100 mm

Listing

Window milling tool VIVALDI Ø 195 x 100 mm

Wiefelstede

7,608 km

Call

Condition: used, Slotted disks, window milling tools, indexable inserts, window construction tools, wood milling tools, wood milling cutters, Slit discs, milling tool for wooden windows, wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Manufacturer: VIVALDI, window milling tool -External milling cutter: Ø 195 mm Hsdpfx Afog Uxguspjnu -Height: 100 mm -Socket: Ø 40 mm -Weight: 9.1 kg

Window milling tool
VIVALDIØ 185 x 75 mm

Listing

Window milling tool VIVALDI Ø 185 x 75 mm

Wiefelstede

7,608 km

€240

Call

Condition: used, Slotted disks, window milling tools, indexable inserts, window construction tools, wood milling tools, wood milling cutters, Slit discs, milling tool for wooden windows, wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter Hnedpfxjg Uxgie Afpou -Manufacturer: VIVALDI, window milling tool -External milling cutter: Ø 185 mm -Height: 75 mm -Socket: Ø 40 mm -Speed: up to max. 6000 rpm -Weight: 5,8 kg

Window milling tool
VIVALDIØ 190 x 90 mm

Listing

Window milling tool VIVALDI Ø 190 x 90 mm

Wiefelstede

7,608 km

Call

Condition: used, Slotted disks, window milling tools, indexable inserts, window construction tools, wood milling tools, wood milling cutters, Slit discs, milling tool for wooden windows, wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Manufacturer: VIVALDI, window milling tool -External milling cutter: Ø 190 mm -Height: 90 mm Hnsdpfog Uxgfsx Afpou -Socket: Ø 40 mm -Speed: up to max. 6000 rpm -Weight: 9.9 kg

Window milling tool
VIVALDIØ 172 x 100 mm

Listing

Window milling tool VIVALDI Ø 172 x 100 mm

Wiefelstede

7,608 km

Call

Condition: used, Slotted disks, window milling tools, indexable inserts, window construction tools, wood milling tools, wood milling cutters, Slit discs, milling tool for wooden windows, wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter Hnedog Uxgbopfx Afpeu -Manufacturer: VIVALDI, window milling tool -External milling cutter: Ø 172 mm -Height: 100 mm -Socket: Ø 40 mm -Speed: up to max. 6000 rpm -Weight: 8.2 kg

Window milling tool
VIVALDIØ 207 x 75 mm

Listing

Window milling tool VIVALDI Ø 207 x 75 mm

Wiefelstede

7,608 km

Call

Condition: used, Slotted disks, window milling tools, indexable inserts, window construction tools, wood milling tools, wood milling cutters, Slit discs, milling tool for wooden windows, wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter Hnedjg Uxf Nspfx Afpsu -Manufacturer: VIVALDI, window milling tool -External milling cutter: Ø 207 mm -Height: 75 mm -Socket: Ø 40 mm -Speed: up to max. 6000 rpm -Weight: 6,7 kg

Tenon hammer
FestoZA101/S

Listing

Wiefelstede

7,608 km

€1,550