Germania-Werk GmbH & Co. KG

Year of construction: 2016, condition: used, Operational condition. Very lo hours! With 2 pots and IR on bot, hot air on top. Bodpfxoyq Rd He Ah Iewi Ask for additional details!

Year of construction: 1989, condition: ready for operation (used), A stencil screen printing machine Ekra is available. Frame dimensions X/Y: 800mm/570mm, print dimensions X/Y: 500mm/390mm, print speed: 110mm/s, positioning accuracy: +/-0.02mm, squeegee pressure: 320N, table adjustment X/Y: +/-8mm, max. print material thickness: 40mm, machine dimensions X/Y/Z: approx. 1300mm/1050mm/1350mm, weight: approx. 350kg. Documentation available. An on-site inspection is possible. Bjdpfx Aeymfdmeh Ijwi

Year of construction: 2008, condition: ready for operation (used), Positioning resolution: 1µm, max. placement rate: 6000cp/h, max. feeder capacity: 310, min. PCB dimensions X/Y: 50mm/50mm, max. PCB dimensions X/Y: 780mm/600mm, PCB thickness range: 0.5mm-3.5mm. Documentation available. An on-site inspection is possible. Bsdsymfcpopfx Ah Ijwi

Year of construction: 2018, condition: good (used), functionality: fully functional, NeoDen4 pick-and-place machine, available as it is no longer required. Technical specifications/equipment: Manufacturer: NeoDen Model: NeoDen4 Integrated PC including software (runs directly on the machine) Firmware: V4.1.3 B2 Proprietary NeoDen feeders – only for sale as a complete unit Feeder configuration: 24 × 8 mm 7 × 10 mm 5 × 16 mm 2 × 24 mm -> Total of 38 feeders Condition/functionality: Machine starts without issues Axes reference correctly Pick-and-place heads move up/down correctly Camera and LED lighting function properly Feeders are correctly detected (see photos) No pick-and-place operations performed Visually in good, well-maintained condition. The machine was used in a production environment and is currently out of operation. Scope of delivery: NeoDen4 machine Integrated PC incl. software Feeders as specified above Bjdpeymavqsfx Ah Ijwi (scope of delivery as shown; however, without mounted components) Terms and conditions: - Pickup only - No individual sale/separate items - Private sale, no warranty, no guarantee, no returns

Year of construction: 2005, condition: good (used), Basic configuration Oven type: Reflow soldering oven with full convection heating Heating zones: 3 zones (convection) Cooling zone: 1 zone (active air cooling) PCB handling: Mesh belt or optional pin (chain) conveyor PCB transport direction: Left → right Dimensions (L × W × H): approx. 2000 × 710 × 1200 mm Weight: approx. 237 kg Controller: Microprocessor (LCD, languages incl. English/German/French) Program capacity: 49 profiles (fixed + freely programmable) Temperature setting: °C / °F Temperature range: approx. 20°C – 300°C per zone Max. reflow width: 10 – 300 mm Conveyor speed: 100 – 800 mm/min (with optional slow-speed module) Transport repeatability: ± 2 mm/min Full convection air circulation: Total heating air: 1200 m³/h Per zone: 400 m³/h Cooling zone: 300 m³/h Atmosphere: air (standard), optional N₂ model available Power requirement (EU): 3×400 VAC, 50 Hz, ~25 A Power requirement (US): 3×208 VAC, 60 Hz Continuous power: ± 6.1 kW Bodpfxoyl Uvvo Ah Iswi Start-up/warm-up power: ± 10 kW during initial warm-up Min. exhaust: approx. 2×250 m³/h recommended 📊 Other details Exhaust: 2 ports (80 mm), temperature < 55°C Sound level: max. 70 dB(A) Safety certifications: CE, EN954-1 Class 3 Features: emergency stop, overheat protection ✔ Reflow soldering of SMT printed circuit boards (Pb-free and standard) ✔ Continuous production and small to medium batch sizes ✔ Prototyping and R&D applications ✔ Optional air or nitrogen operation (depending on model)

Year of construction: 2025, condition: good (used), General Features Type: Desktop reflow oven (infrared + hot air convection) Number of heating zones: 6 (top heating) Cooling zone: 1 internal cooling zone Control: Touchscreen with programmable profiles Application: Prototyping, small to medium series production PCB Specifications Max. PCB width: ± 260 mm Max. PCB length: ± 350 mm Max. PCB thickness: 20 mm Transport: Mesh conveyor (adjustable speed) Temperature & Performance Max. temperature: ± 300 °C Warm-up time: ± 15–20 minutes Temperature control: PID regulation Temperature accuracy: ± 1 °C Number of programmable profiles: multiple (storage possible) Electrical Data Power supply: 220V (single phase) Power: ± 1100–2000 W (depending on version) Bwodoyl Uu Sopfx Ah Ioi 📏 Dimensions & Weight Dimensions (L×W×H): ± 1020 × 507 × 350 mm Weight: ± 39 kg Suitable For Lead-free (RoHS) soldering Prototyping labs Small production environments Universities / development departments

Year of construction: 2011, condition: good (used), Type: Reflow soldering oven for PCB assembly (convection reflow). Manufacturer: SEHO Systems GmbH. Model: GoReflow 1.8. Application: Soldering process using full convection heat for small to medium-sized batches. Heating and Process Zones Number of heating zones: 5 zones (via convection). Length of heated zone: approx. 1850 mm. Maximum PCB width: approx. 410 mm. Number of cooling zones: 2 zones with active ventilation. Average transport/conveyor speed: approx. 0.40 – 0.55 m/min. Machine Structure and Dimensions Total length: approx. 3200 mm. Width: approx. 1250 mm. Bjdpfx Ahsyl Utbj Iowi Height: approx. 1600 mm. Control and Functions Operation: Touch display or microprocessor-controlled interface (depending on configuration). Flux management: Filter and collection system for solder flux residues. Safety features: Emergency stop button and visual status indicators (signal lamp). Inline integration: Options for connection to SMT production lines via interfaces (optional).

Condition: excellent (used), functionality: fully functional, Good day, We are offering used clamping devices from Erowa and 3R, suitable for die-sinking EDM and milling operations. Below is a list of the available items (please refer to the attached images for details): - ER-034387 QuickChuck 50 mounted on a clamping block (Image 03/04) - ER-012299 Quick-Change Chuck NSF on a plate (Image 05/06) - ER-010562 Probe with 2 mm ball (Image 07/08) - ER-010723 ITS 50 Control Arbor (Image 09) - F-Tool Holder with 25 mm square (Image 10/11) - MTS Pallet (Image 12/13) - ER-008566 Collet Holder 50 (Image 14/15) - ER-010495 15 mm Square Alignment Gauge (Image 16/17) - Vice with Erowa platform (Image 18/19) - Erowa Holder with hexagonal slot, e.g. for dial gauge holders (Image 20/21) - Erowa Holder for flexible clamping applications (Image 22/23) Bwodpoyl Nr Sefx Ah Iei - System 3R high-precision vise / can be converted to Erowa on request (Image 24/25) All parts have been thoroughly inspected and are fully functional. Please feel free to contact us if you have any questions or are interested.

Condition: not inspected (used), Bar feeder by manufacturer FMB, model turbo 5-42 XT Condition: used. Available immediately. Bwsdpfx Aheyl Ng Nj Ioi The bar feeder was mounted on a MAZAK SQT10MS.

Year of construction: 2011, condition: ready for operation (used), An inline SMT stencil printer/solder paste printer is offered. Print area X/Y: 50mm/40.5mm - 510mm/508.5mm, PCB thickness: 0.2mm - 6mm, board weight max.: approx. 1kg, print pressure range: 0 - 20kg, core cycle time: approx. 12s, machine alignment capability: greater 2Cpk at +/-12.5µm 6 Sigma, process/wet print accuracy: greater 2Cpk at +/-25µm 6 Sigma, installation space L/W/H: approx. 2060mm/1500mm/1570mm, machine weight: approx. 800kg. Inspection by arrangement possible. Bjdpjylzhlefx Ah Iowi

Year of construction: 2012, condition: ready for operation (used), A placement machine is offered. Manufacturer: MYDATA Mycronic, PCB size X/Y: 70mm/50mm - 554mm/443mm, PCB thickness: 0.4mm - 6.0mm, PCB weight max.: 8kg, SMEMA transfer height typ.: 892mm - 987mm, installation dimensions W/L/H: approx. 2740mm/1740mm/1500mm, machine weight: approx. 1700kg. Inspection by arrangement possible. Bodpfx Ajylzh Soh Iewi

Condition: used, functionality: fully functional, Coil winding machine Froitzheim und Rudert Bwsdpfoylydlex Ah Iji Winding diameter 250 mm, winding width 500 mm Pneumatic tailstock

Year of construction: 2018, condition: excellent (used), Technical Data Max. Product Size (Vacuum Chamber): 450 x 510 mm (L x W) Conveyor Width: 65 – 510 mm Transport Direction: left → right Entry Height: 950 +/- 20 mm Clearance Height: 30 / 30 mm (top/bottom) Conveyor Speed: 0.20 – 3.0 m/min, controlled and monitored Conveyor Chain: 5 mm cam length PCB Support: triangular, 10 mm high / 10 mm lowerable, per lane Automatic Width Adjustment (Conveyor & Support) Automatic Chain Lubrication, per lane Bottom Heating in Preheating Zones SMEMA Interface Bwjdpfxoylxglo Ah Iei Nitrogen Version (N2) incl. Calibration Protocol Software & Interfaces Maintenance Software System Monitoring Fan Monitoring Watcher Software Barcode Software incl. Barcode Reader MES Connection via General Interface (Customer PC) Equipment & Safety Motorized Hood Opening 2x Emergency Stop Optical Warning Light (red/yellow/green) Conveyor Overload Cut-off Exhaust Monitoring incl. Volt-free Contact Conveyor Start Interlock (100°C) Conveyor Rail Parallelism +/- 0.5 mm Operating Hours Counter Standard Painting RAL 7035 ESD, VAC Module RAL 7021 ESD Electrical Data Connection: 1x3~N, PE 230/400V, 50 Hz Vacuum Units: 2x3~N, PE 230/400V, 50 Hz Documentation & Protocols Operating Manual, Mechanical Drawings & Circuit Diagrams (USB) The sale is carried out in cooperation with AS-Equipment.

Condition: used, functionality: limited functionality, Various conveyor belts available – see photos. For sale both as a package and individually. Inspection possible at any time. Bsdoyll Dwjpfx Ah Iowi

Year of construction: 2026, condition: new, working length 1000-1600 mm Bwsdpfx Ahsyk H Tdj Isi Working width 40-150 mm Thickness 10-80 mm

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, For sale: Zeroclamp Zerobot 100P automation system, commissioned in 2015. (Perfectly suited for a Haas UMC 750, but also compatible with other machine types.) This automation system allows for either vice handling or raw part handling. Offers completely flexible configuration options. Large workpiece storage for many raw parts (fully customizable). Compact footprint. Bwsdpoyk D Dysfx Ah Iji Features: * Various mounting plates for raw part handling * Raw part gripper * Second rack for increased part capacity * and much more This solution enables both raw part and clamping device handling. There are numerous possible applications, and we are happy to provide advice.

Year of construction: 2022, condition: used, Operational condition! Bwedpsyi Uwuofx Ah Ioi Ask for specification and quotation!

Year of construction: 2022, condition: used, Operational condition units. Multiple ovens available from 2017 to 2022. Ask for quotation! Bwjdeyi Uu Hspfx Ah Iei

Year of construction: 2013, condition: used, functionality: fully functional, machine/vehicle number: 7.50.1081, Schneider & Koch AOI TS-LV6 / LaserVision Twin LV6 Automated Optical Inspection System (used 2D/3D AOI for SMT circuit boards, fully functional, manufactured approx. 2014–2016, for precise inspection of components, solder joints, and paste) Test technology: Schneider & Koch Model: TS-LV6 AOI unit Bwodpfxsyid Due Ah Iei Fully operational

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 700168, type of input current: AC, Automatic stencil printer Bedpfxjyidw Uo Ah Iowi Speedprint Technology Model: SP700 AVI Used, fully functional

Year of construction: 2011, operating hours: 6,402 h, condition: used, functionality: fully functional, machine/vehicle number: A03277, Yamaha i-Pulse M6ez High-Speed SMT Pick-and-Place Machine (6-head mounter, year of manufacture approx. 2011, fully functional, suitable for SMD components from 01005 up to large parts, PCB up to 460x410 mm) - Bwsdpoyidqhefx Ah Ioi Operating hours: 6,402 hours Placed components: 21,649,312 pieces Machine is fully operational - Price does not include feeders! The following feeders are available: - 100 pcs Intelligent Splice Tape Feeder F2-8/4mm 5 pcs Intelligent Splice Tape Feeder F2-12mm 3 pcs Intelligent Splice Tape Feeder F2-16mm 1 pc Intelligent Splice Tape Feeder F2-24mm

Condition: used, Year of construction: 2006, Operational unit. Bsdpfjyh Hdzex Ah Iswi Head configuration: CP20/CP20/CP12 Flexible dual lane transport L->R Available in Q1 2026

Year of construction: 2011, condition: used, Operational unit. Bjdoyh Ha Nspfx Ah Iowi Recently taken from the production!

Year of construction: 2021, condition: excellent (used), functionality: fully functional, Complete AOI Production Line GÖPEL Vario Line 3D X100 incl. Handling – Used System For sale is a complete, integrated AOI production line consisting of a GÖPEL Vario Line 3D X100 inline AOI system including full PCB handling (loading and unloading, buffer and verification stations). Line configuration (excerpt): - GÖPEL Vario Line 3D X100 Inline AOI - 3D measurement module (ViewZ) - Orthogonal and angled view inspection - PILOT AOI software incl. CAD import, OCR/OCV, statistics - Inspection area: 510 x 470mm PCB Handling (RG Modules): - LPE-1M Loader (magazine loader) - PB 500/1 buffer conveyor - PB 500/3-AP buffer conveyor with integrated inspection/verification station - LPA-2M/QV unloader with pass/fail sorting (2 magazines) - Electric width adjustment (bus connection) - Inline interfaces (SMEMA) - Verification and analysis workstations Condition: - Used equipment from ongoing production - Well maintained and fully functional - Sale as a complete line, not individual components Viewing & Service: - Sale on behalf of a customer - On-site inspection possible - Training and commissioning can be offered on request - Support with disassembly, transport, and recommissioning available by arrangement - Ideal for EMS providers and electronics manufacturers Bedpfx Aheyhzune Iewi Location: Germany Scope of delivery: as inspected

Condition: new, Year of construction: 2026, Aluminum Incline Conveyor with Substructure (PU/PVC with Cleats & Corrugated Sidewalls) We offer a robust incline conveyor in aluminum construction design for the reliable transport of piece and bulk materials—ideal for industry, trade, recycling, woodworking, and much more. Thanks to cleats and corrugated sidewalls, secure material transport is ensured even on steep conveyor routes. _____ Technical Data (Sample Configuration): ✔ Infeed height: customisable ✔ Inclined section: length freely selectable ✔ Discharge height: customisable ✔ Substructure with adjustable leveling feet & machinery feet or with transport castors → for compensating uneven surfaces / stable positioning _____ Design / Frame: ✔ Aluminum construction profile Bwsdpfx Asyhzpljh Iji ✔ Double profile 90x45 mm or reinforced triple profile 135×45 mm ✔ Continuous wear plate 2.0 mm galvanized or 1.4301 stainless steel (VA) _____ Rollers / Drive: ✔ Drive and deflection rollers made from S235 steel, welded & machined ✔ Diameters: Ø100, 150 or 220 mm ✔ Shafts fixed with pillow block bearings ✔ Drive: shaft-mounted geared motor 0.18 – 3.0 kW ✔ Belt speed: individually adjustable ✔ Connection: 230/400V, 50Hz, IP54 protection class (standard) ✔ Drive prewired up to the motor terminal box ➡️ Commissioning must be carried out by a qualified electrician _____ Conveyor Belt / Cleats: ✔ PVC conveyor belt DM 10/2 0+005 PVC green ✔ Belt widths: 100, 200, 300, 400, 500, 600, 700, 800, 900, or 1,000 mm ✔ Endless high-frequency welded (stepped joint) ✔ 2-ply, 3-ply with extra lateral stability ✔ Corrugated sidewalls: up to 80 mm high ✔ Cleats: customizable ✔ Pitch customizable _____ Options / Accessories Available: ✔ Infeed plates ✔ Hoppers / infeed hoppers ✔ Bunkers / loading bunkers ✔ Discharge hoppers ✔ Special lengths / special widths ✔ Cleats & corrugated sidewalls as required _____ ✔ Custom solutions made to your specifications ✔ Industrial quality ‘Made in Germany’ Dimensions, versions, and pricing on request Simply reach out—we provide fast and straightforward advice. Discover tailored solutions for your industry! As an innovative mechanical engineering company, we are proud to offer bespoke solutions for the recycling, food, and processing industries. Our comprehensive product portfolio covers everything from conveyor systems and flat belt conveyors to incline conveyors, angle conveyors, and Z-conveyors. In addition, we manufacture loading bunkers, magnetic separators, overband magnetic separators, drum magnetic separators, and dosing bunkers—all tailored to meet our customers’ specific requirements. We understand that every industry and every project is unique, which is why we tailor our solutions precisely to your needs and specifications. Complex projects are an exciting challenge for us, and we look forward to developing innovative solutions together with you. With us, there are no off-the-shelf solutions—every problem gets the right answer! Challenge us! Contact us and discover how we can turn your requirements into custom solutions. Together, we will shape the future of your production processes!