Kaufmann

Condition: used, Year of construction: 1987, functionality: fully functional, turning diameter: 1,500 mm, spindle speed (min.): 9 rpm, spindle speed (max.): 27 rpm, The UBC 150 is a high-performance wheel turning machine specifically designed for the re-profiling of railway wheelsets without the need for disassembly. Manufactured by Rafamet Year of manufacture 1987 Max working diameter, mm 700-1500 Wheelset axle length minimum, mm 1640 Wheelset axle length maximum, mm 3000 Gauge of the wheelsets to be machined, mm 1435 Track width, mm 1435, 1524, 1676 Clamping diameter, mm 550-1350 Maximum tire width, mm 140 Spindle speeds, rpm 9 – 27 Bjdpjypbcwofx Afcscw Feed speeds, mm/min 1,6 – 50 Total power required, kW 172 Machine dimensions, mm 8700 x 3600 x 3200 Machine weight, kg 59200

Year of construction: 2022, condition: used, machine/vehicle number: 710370, max. bar passage: approx. Ø 42 mm, max. bar length: approx. 800 mm, 12-position tool changer, tool holder: VDI 25, 1 compressed air filter unit DSL 02D-SF-Goring 2-MBL, nominal flow rate: approx. 900 m³/h, 1 cooling unit HYDAC RFCS-AH-030, year of construction: 2021, serial no.: 2300040370, 1 hydraulic unit KNOLL TG 30, year of construction: 2022, serial no.: 1570792, 1 hydraulic cooling unit BKW ET22V-134-B-DI, year of construction: 2022, serial no.: 834179, 1 chip conveyor KNOLL 320 S-1/225, year of construction: 2022, serial no.: 2204044, control: BENZINGER Bedpfxsyn Nlko Afcocw

Year of construction: 2019, operating hours: 31,933 h, condition: used, machine/vehicle number: 710300, Weight: 4,200 kg, 7-position tool changer, handling robot YASKAWA YR-MA1440MH12-A00, year of manufacture: 2018, serial number: K17464-426-1, automation system/workpiece storage EGS Automation Benzinger, year of manufacture: 2018, serial number: 180103, SIEMENS control, tool monitor, chip conveyor KNOLL 320 S-1/225, year of manufacture: 2018, serial number: 1350025, HYDAC cooling unit, compressed air filter system DSL Sigmatec 15, joining module PROMESS UFM Line5 Bcedpfx Asyn Nkyjfcjw

Year of construction: 2018, operating hours: 32,615 h, condition: used, machine/vehicle number: 710299, Travel ranges (X/Y): 37/25 cm, Weight: 4,200 kg, 7-position tool changer, SIEMENS Sinumerik control, NORDMANN Tool Monitor, KNOLL 320S-1/225 chip conveyor, Year of manufacture: 2018, Serial number: 1350024, HYDAC cooling unit, DSL Sigmatec 1 compressed air filtration system, YASKAWA YR-MH00012-A00 handling robot, Year of manufacture: 2018, Serial number: K17752-594-1, EGS Sumo Ecoplex Automation Benzinger automation system/workpiece storage, Year of manufacture: 2018, Serial number: 180102, double, 1 auxiliary table Bjdpfx Ajyn Nktefcocw

Year of construction: 2018, operating hours: 34,879 h, condition: used, machine/vehicle number: 710298, Travel paths (X/Y): 37/25 cm, weight: 4,200 kg, 7-position tool changer, SIEMENS Sinumerik control, NORDMANN Tool-Monitor tool monitoring device, KNOLL 320S-1/225 chip conveyor, year of manufacture: 2018, serial number: 2074174, HYDAC chiller, compressed air filtration unit DSL Sigmatec 15, YASKAWA handling robot YR-MH00012-A00, serial number: K17731-034-1, year of manufacture: 2018, automation system/workpiece storage EGS Sumo Ecoplex Automation Benzinger, year of manufacture: 2018, serial number: 180101, double position, 1 side table Bjdpoyn Nkmjfx Afcecw

Year of construction: 2023, operating hours: 3,635 h, condition: used, machine/vehicle number: 22260005, Max. workpiece diameter: approx. 200 mm, Number of spindles: 2, Number of tool stations: 12, Control unit: SIEMENS Sinumerik, 1 KUKA handheld control unit, Serial no.: 0062709, 1 chip conveyor, KNOLL 280 S-1/160, Year of manufacture: 2022, Serial no.: 1566310, Cooling unit: DELTATHERM RKV 5.5, Year of manufacture: 2022, Serial no.: 3-48097, Net weight: approx. 190 kg, Connected load: 400/460 V/50/60 Hz, 1 handling robot: KUKA Industrial Robot Cybertec-2 Series, Year of manufacture: 2022, Serial no.: 1306487, Net weight: approx. 282 kg, Payload: approx. 22 kg, 1 robot control unit: KUKA KR C5 Dualcap AC, Year of manufacture: 2022, Serial no.: 3131152, Connected load: 3 x 380-480 V, 50/60 Hz, 1 coolant filtration unit: KNOLL KF 150/950, Year of manufacture: 2022, Serial no.: 1566311, 1 air filtration unit: AFS 1100, Year of manufacture: 2021, Serial no.: 36957, Net weight: approx. 70 kg Bcjdpfx Asyn Nl Dofcjw

Year of construction: 2005, condition: not inspected (used), functionality: unexamined, travel distance X-axis: 200 mm, travel distance Z-axis: 500 mm, controller model: SIEMENS SINUMERIK, overall weight: 8,000 kg, turning length: 800 mm, machine/vehicle number: 500571, Equipment: chip conveyor, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the item within either May 11–13, 2026, or May 18–21, 2026, without exception. TECHNICAL DETAILS Travel X-axis: approx. 200 mm Travel Z-axis: approx. 500 mm Spindle bore: approx. 100 mm Turning length approx.: 800 mm MACHINE DETAILS Control: SIEMENS SINUMERIK Operating voltage: 400 V Rated current: 80 A Connected load: 47 kW Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 6,000 x 3,000 x 3,300 mm Weight: 8,000 kg EQUIPMENT Double turret with 12-position tool turret each Bcjdpfx Aeynhd Ssfcow Tailstock Main spindle Chip conveyor Two manuals BÜCHEL brand extraction filter Note: Machine can be transported on a standard truck. External reference: Pieper - Lot 50

Condition: not inspected (used), functionality: unexamined, overall weight: 500 kg, turning diameter: 240 mm, center height: 110 mm, spindle speed (max.): 3,000 rpm, machine/vehicle number: 219278, No reserve price – guaranteed sale to the highest bidder! Bidding requires timely collection either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Swing diameter over bed: 220 mm Swing diameter over cross slide: 140 mm Centre height over cross slide: 70 mm Centre height over bed: 110 mm Centre distance: 350 mm Spindle bore: 22 mm Spindle speed: 270–3,000 rpm MACHINE DETAILS Bcodpjym Rrisfx Afcjw Operating voltage: 380 V Dimensions & Weight Dimensions (L x W x H): 1,300 x 800 x 1,600 mm Weight: 500 kg EQUIPMENT Tailstock Multifix quick-change toolpost Quick-action chuck Collets Additional suitable accessories External reference: Lot 16 / Ulmer

Year of construction: 1987, condition: not inspected (used), functionality: unexamined, overall weight: 800 kg, turning diameter: 260 mm, center height: 140 mm, spindle speed (max.): 3,550 rpm, machine/vehicle number: 61699, No reserve price – guaranteed sale to the highest bidder! Bidding obligates timely collection either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Swing diameter over bed: 260 mm Swing diameter over cross slide: 160 mm Centre height over cross slide: 80 mm Centre height over bed: 140 mm Centre distance: approx. 500 mm Spindle speed: 71 – 3,550 rpm Spindle bore: approx. 28 mm MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Rated current: 25 A Connected load: 3 kW Dimensions & Weight Dimensions (L x W x H): 1,600 x 1,000 x 1,900 mm Weight: 800 kg EQUIPMENT Tailstock Multifix Type A toolholder Steady rest Four-jaw chuck (diameter: 120 mm) Bsdeym Rgtopfx Afcjcw

Year of construction: 1985, condition: not inspected (used), functionality: unexamined, overall weight: 800 kg, turning diameter: 280 mm, center height: 140 mm, spindle speed (max.): 1,680 rpm, machine/vehicle number: 31601, No reserve price – guaranteed sale to the highest bidder! Bidding requires timely pickup either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Swing diameter over bed: 280 mm Swing diameter over cross slide: 180 mm Center height over cross slide: 90 mm Center height over bed: 140 mm Bcjdpfx Afsym N Hfocow Spindle speed: 16 – 1,680 rpm Center distance: 550 mm Spindle bore: approx. 38 mm MACHINE DETAILS Operating voltage: 380 V Rated current: 6 A Dimensions & Weight Dimensions (L x W x H): 1,400 x 900 x 1,800 mm Weight: 800 kg FEATURES Tailstock Multifix tool post HEIDENHAIN digital readout External reference: Oberthür

Condition: not inspected (used), functionality: unexamined, travel distance X-axis: 100 mm, travel distance Z-axis: 200 mm, overall weight: 2,000 kg, spindle speed (max.): 6,000 rpm, machine/vehicle number: 14736259, No minimum price – guaranteed sale to the highest bidder! By placing a bid, you commit to timely collection either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026. TECHNICAL DETAILS X-axis travel: approx. 100 mm Z-axis travel: approx. 200 mm Spindle speed: up to 6,000 rpm Bcsdoym N Agopfx Afcow MACHINE DETAILS Operating voltage: 380 V Frequency: 50/60 Hz Rated current: 24 A Connection load: 25.5 kVA Dimensions & Weight Dimensions (L x W x H): 1,800 x 1,500 x 2,100 mm Weight: 2,000 kg External reference: Elos - Lot 17

Condition: ready for operation (used), functionality: fully functional, center height: 160 mm, center width: 750 mm, spindle bore: 40 mm, spindle speed (max.): 3,000 rpm, workpiece diameter (max.): 375 mm, machine/vehicle number: 160378, No reserve price – guaranteed sale to the highest bidder! By placing a bid, you are obligated to collect the item within the specified timeframes: either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026. TECHNICAL DETAILS Centre height: 160 mm Centre distance: 750 mm Maximum workpiece diameter over bed: 375 mm Maximum workpiece diameter over cross slide: 180 mm Spindle speeds: 38 to 3,000 rpm Spindle taper: Morse 5 Spindle bore: 40 mm Collet capacity: 24 mm Fine feeds longitudinal and cross: 0.015 to 0.21 mm/rev Longitudinal and cross feeds: 0.025 to 0.35 mm/rev Cross slide travel on bed: 750 mm Compound slide travel: 120 mm Cross slide travel: 215 mm Centre height above tool slide: 32 mm Tool section: 20 x 20 mm Tailstock quill taper: Morse 3 Quill travel: 120 mm Lateral adjustment: +/- 10 mm MACHINE DETAILS Operating voltage: 380 V Dimensions & Weight Bcsdpfsym Nkkex Afcjw Dimensions (L x W x H): 2,500 x 1,000 x 1,500 mm Weight: 2,500 kg EQUIPMENT Including documentation Matching tool cabinet with accessories included External reference: Showroom

Year of construction: 2003, condition: not inspected (used), functionality: unexamined, travel distance X-axis: 150 mm, travel distance Z-axis: 250 mm, controller model: MAZATROL 640 T, overall weight: 4,000 kg, machine/vehicle number: 310163917, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item within the specified period: either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026. TECHNICAL DETAILS X-axis travel: 150 mm Z-axis travel: 250 mm Bcjdpfx Afsym Dhwjcow MACHINE DETAILS Control: MAZATROL 640 T Operating voltage: 200 V Frequency: 50/60 Hz Rated current: 89 A Connected load: 17.8 kVA Dimensions & Weight Dimensions (L x W x H): 3,000 x 2,000 x 2,200 mm Weight: 4,000 kg EQUIPMENT 12-position tool turret Tailstock External reference: Elos - Lot 16

Year of construction: 1996, condition: ready for operation (used), Turning diameter: 200mm, Unrun diameter: 260mm, Turning height: 200mm, Spindle clearance: 30mm, Spindle speed: 7500rpm, Power: 10kW, Torque: 49Nm. Travel X/Z: 520mm/200mm, rapid traverse X/Z: 30m/min, tool positions: 14, tool holder: VDI 30, drive tool speed: 6000rpm. Machine dimensions X/Y/Z: approx. 2100mm/2100mm/2300mm, weight: approx. 3300kg, control: Siemens Sinumerik. Documentation available. On-site inspection is possible. Bedpfeym Dfcex Afcocw

Year of construction: 1995, condition: ready for operation (used), A CNC counter-spindle lathe Index with Y-axis and bar feeder MBL 42 is available. Turning length: 400mm, turning diameter: 420mm, bar capacity: 60mm, speed: 6000rpm, machine dimensions X/Y: 4750mm/1950mm. Documentation available. An on-site inspection is possible. Bsdpfeym Dgmjx Afcscw

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 100 mm, travel distance Z-axis: 200 mm, controller model: EMCO EASY 2CONTROL (HEIDENHAIN TNC 640, SIEMENS SINUMERIC 840), turning length: 300 mm, No reserve price – guaranteed sale to the highest bidder! Submitting a bid obliges you to collect the item within the specified period, either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026. TECHNICAL DETAILS Bcjdpfxsymz T Do Afcew Turning length: 300 mm Centre height over bed: 100 mm Travel X-axis: 100 mm Travel Z-axis: 200 mm MACHINE DETAILS Control: EMCO EASY 2CONTROL (HEIDENHAIN TNC 640, SIEMENS SINUMERIC 840) Operating voltage: 230 V Frequency: 50-60 Hz Rated current: 11 A EQUIPMENT Tailstock Three-jaw chuck Special turret Mobile workbench Matching accessories Note: An identical machine of the same design will be delivered; not exactly the one shown in the photos.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, operating hours: 775 h, Equipment: chip conveyor, documentation/manual, HYUNDAI WIA L150SY Turning Center (Y-Axis, Sub-Spindle) We are offering for sale a HYUNDAI WIA L150SY CNC turning center. The machine is being sold due to investment in newer equipment and limited production space. The machine is in good technical condition and currently in operation. Inspection under power is possible by appointment. This model features Y-axis and live tooling capability, making it suitable for complex and precision parts production. All standard technical specifications are available online. Additional information, videos, or detailed photos can be provided upon request. Prior to shipping, the machine will be professionally cleaned. Tooling, holders, chucks, and accessories currently used with the machine can be included in the sale. Transportation are the responsibility of the buyer. Please contact me via email or WhatsApp for further information. Bcjdpfxjymwt Hs Afcow

Year of construction: 2022, condition: excellent (used), Machine Specifications​ Imperial Metric CNC Control Yes Control Type OSP-P300LA-e # of Axes 2 Swing 20.47" Turning Diameter 16.14" Center Distance 43.31" Chuck Size Bjdpeymq Ukefx Afcecw 10" Bar Capacity 3.15" X-Axis Travel 9.05" Z-Axis Travel 45.04" Spindle Nose A2-8 Spindle Speed 3,000 rpm Main Motor 20 HP Turret Capacity 12 Tailstock (Yes/No) Yes

Year of construction: 2006, condition: excellent (used), Turning capacity: Max. turning diameter: 190 mm – 200 mm Max. turning length: 620 mm – 780 mm Bar capacity: 51 mm / 65 mm Spindles (main & sub-spindle): Spindle speed: 4,500 – 6,000 rpm Bsdpoymqx Nsfx Afcecw Drive power (main spindle): 15/11 kW Spindle nose: A2-5 / A2-6 Turret & axes: Number of turrets: 2 (upper turret with B-axis, lower turret) B-axis swivel range: (or approx. total) Y-axis (stroke): (total) Number of axes: total 9 Dimensions & Weight: Footprint: approx. (width x depth) Machine weight: approx. 12,500 kg – 13,500 kg

Year of construction: 2011, condition: excellent (used), 2 units Technical Data (Overview): Bar capacity: 42 mm Max. turning diameter: approx. 190 mm Max. turning length: approx. 500 mm Spindle speed (main & sub-spindle): 6,000 rpm Spindle motor power: 11/7.5 kW Turret: 2x 12 stations (often driven) Y-axis: Upper, mm Bodjymqxiopfx Afcocw Control: Fanuc 31i/T (or NT SmartX) Machine weight: approx. 5,650 kg

Condition: ready for operation (used), empty load weight: 1,820 kg, total length: 2,250 mm, total width: 850 mm, total height: 1,400 mm, Ursus250 Er zijn veel hulpmiddelen inbegrepen Distance between centers: 1000 mm Bodoymg R Uspfx Afcocw Swing over bed: 505 mm Swing over cross-slide: 250 mm Diametre of main spindle bore: 52 mm Power on main spindle: 7,5 HP Number of speeds: 23 > 1000 rpm

Condition: ready for operation (used), 3 guideway flat bed lathe - heavy duty 2 steadies are included Distance between centers: 6100 mm Bsdoyl A Duspfx Afcscw Swing over bed: 1500 mm Swing over cross-slide: 1320 mm Swing in gap: 2000 mm Diametre of main spindle bore: 102 mm Number of speeds: 4 > 180 rpm

Condition: ready for operation (used), controller model: Fanuc, swing diameter over cross slide: 2,000 mm, Uitgerust met SK-kit: - automatische gereedschapswisselaar 8 posities - VDI-type - hydraulische klauw - hydraulisch contrapunt - hydraulisch centrum Swing over bed: 620 mm Swing over cross-slide: 580 mm Dia of spindle bore: 80 mm Power on the spindle: 11 kW Number of speeds: 1 > 2500 rpm Toolchanger: yes Number of tools: 8 positions Bcjdpfxeyl A Dzs Afcow

Condition: ready for operation (used), controller model: Heidenhain Manual Plus, empty load weight: 1,500 kg, total length: 2,870 mm, total width: 1,510 mm, total height: 1,550 mm, swing diameter over cross slide: 1,000 mm, Pinacho Rayo 180 Ø 360 x 1000 mm CNC Swing over bed: 360 mm Bedpfeyl A D Iox Afcjcw Swing over cross-slide: 198 mm Dia of spindle bore: 42 mm Power on the spindle: 5,5 HP Number of speeds: 100 > 4000 rpm

Condition: ready for operation (used), WWDK 80 heavy duty lathe with 3 guideways max workpiece weight: 100 ton Bsdpfeyl A D Uex Afcscw Distance between centers: 7500 mm Swing over bed: 1900 mm Swing over cross-slide: 1650 mm Power on main spindle: 150 HP Max weight between centers: 100 ton