RUSS Holzbau

Year of construction: 2006, condition: new, functionality: fully functional, WASTE HEAT BOILER GIAS 1.5 - DL + 8 VENTILATORS (HCH-90 - 4 T-7.5/AL MODEL) THIS IS A FIRE-TUBE BOILER WITH 3 FLUE GAS PASSES. THE BOILER LOAD IS REGULATED BASED ON THE STEAM PRESSURE TO THE CONSUMER, IN A CONTINUOUS SYSTEM BY TIMING THE CYCLE OF THE HYDRAULIC FEED SYSTEM. Ibodpfx Ajz S Upgocpec THE COMBUSTION SYSTEM CONSISTS OF A COMBUSTION CHAMBER LOCATED AT THE BOTTOM OF THE BOILER, BELOW THE PRESSURE CHAMBER. INSIDE THE COMBUSTION CHAMBER, GRATE ELEMENTS ARE INSTALLED, AND THE SECONDARY AIR DUCT IS LOCATED AT THE BOTTOM OF THE GRATE.

Condition: good (used), Samon bottom discharge conveyor for the efficient and gentle transport of potatoes, onions and other agricultural products. This conveyor is equipped with a conveyor belt measuring 360 cm in length and 65 cm in width. Thanks to the bottom discharge system, products can be discharged in a controlled manner, reducing the drop height and the risk of product damage. The machine is suitable for use in various sorting, processing and packaging lines. Specifications: - Brand: Samon - Type: Bottom discharge conveyor - Conveyor belt length: 360 cm - Belt width: 65 cm - Application: Transport and discharge of agricultural products Advantages: - Gentle product discharge - Suitable for various agricultural products - Easy to integrate into existing processing lines More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. - Since 1977 supplier of reliable used agricultural and horticultural equipment Ibsdpez S Sp Dsfx Acpjc - Machines are checked for delivery - Experienced team - We can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: used, New: Yes Year of construction: 2024 Ibodpfjz S Hlyjx Acpjc Colour: Black Applicable material: Potatoes

Condition: used, New: Yes Year of construction: 2025 Empty weight: 750 kg Ibodpfx Ajz S Hilocpjc

Condition: used, Type of fuel: Diesel Year of construction: 2008 Power: 33 kW (45 HP) Number of cylinders: 4 Empty weight: 1.800 kg Carrying capacity: 400 kg GVW: 2.200 kg Ibsdpsz S Efrjfx Acpoc Make of engine: Kubota

Condition: used, Year of construction: 2007 Power: 33 kW (45 HP) Ibsdpfx Acjz S Eflspoc

Condition: used, New: Yes Iodoz S Dr Depfx Acpobc Year of construction: 2024

Year of construction: 2008, operating hours: 11,120 h, condition: used, functionality: fully functional, machine/vehicle number: ONL-150, Complete materials drying plant in working condition last run in August 2025. Open to offers Equipment included ONIX ONL-150 triple pass rotary drum dryer ONIX Biomass Burner Multi Fuel (wood chip, Sawdust, Straw, Nut shells and many others) Rated at 31102 lb Per Hour water evaporation capacity Wet product feed bin 18m3 Wet product feed screw Fuel push floor feed bin 36m3 and scalping / Pneumatic loading system Fuel Hammer mill Schutte 24-20-301 Fuel feed fan and ducting ID fan 250kw and VSD control Recovery cyclones and ducting Rotary Valve Iedpfx Asz Sxbtecpjbc Reversing Screw All Structures, Walkways Motor control panels Alen Bradly PLC and Logic with full access rights SCADA Software Files Drawings, Installation and Operation manuals. OEM Support Two complete plants available..... This listing is for ONE plant only. $2500000 each or ask about a package deal. Plant 1 26975 hours Plant 2 11120 hours EXW or FOB available with Local contractors available. Inquire for price to dispatch from local port. Please enquire for more information

Condition: like new (used), functionality: fully functional, Vacuum metallizing machine for coating parts through aluminum evaporation and deposition, equipped with a vacuum chamber and automatic control system. Configured for Glow Clean treatment and aluminum deposition using an XTC-controlled evaporation system.Main Operating Parameters: Blower ON Pressure: 10 Torr; Crossover Pressure: 3 × 10⁻² Torr; Fireline Overpressure: 3 × 10⁰ Torr; Mechanical Pump Pressure Limit: 3 × 10⁻¹ Torr; Initial Evacuation Pressure: 5 × 10⁻⁵ Torr; Door Opening Speed: 75; Glow Clean System: Automatic; Glow Clean Control Pressure: 5.00 × 10⁻² Torr ± 5.00 × 10⁻³; Strike Pressure: 9.00 × 10⁻³ Torr; Power Level: 37; Glow Clean Cycle Duration: 90 seconds; Speed: 65; Evaporation Mode: XTC; Evaporation Detection Point: 2.25 × 10⁻⁵ Torr; Evaporation Fixture Speed: 80; Tank Heat Setpoint: 85; Speed: 85. ESPAÑOL: Metalizadora al vacío para recubrimiento de piezas mediante evaporación y deposición de aluminio, equipada con cámara de vacío y sistema de control automático. Configurada para procesos de limpieza por descarga (Glow Clean) y deposición de aluminio mediante sistema de evaporación con control XTC. Parametros principales de operación: Presión de encendido del soplador: 10 Torr, Presión de cruce (Crossover Pressure): 3 × 10⁻² Torr, Sobrepresión Fireline: 3 × 10⁰ Torr, Límite de presión de bomba mecánica: 3 × 10⁻¹ Torr, Presión inicial de evacuación: 5 × 10⁻⁵ Torr, Velocidad de apertura de puerta: 75, Sistema Glow Clean: Automático, Presión de control Glow Clean: 5.00 × 10⁻² Torr ± 5.00 × 10⁻³, Presión de encendido (Strike Pressure): 9.00 × 10⁻³ Torr, Nivel de potencia: 37, Duración del ciclo Glow Clean: 90 segundos, Velocidad: 65, Modo de evaporación: XTC, Punto de detección, Velocidad: 85 de evaporación: 2.25 × 10⁻⁵ Torr, Velocidad del dispositivo de evaporación: 80, Setpoint de temperatura del tanque: 85 Ijdpfx Acez Svtaepsbc

Year of construction: 2017, condition: new, functionality: fully functional, machine/vehicle number: 360420, Methane gas purification system (natural gas separation through dehydration, moisture removal and separation), BRAND PSB INDUSTRIAS INC., MODEL X-1060-SP, SERIAL NO. 360420, YEAR 2017, operating inlet temperature 90 °F, methane W/5444SCFM 600 PSI, 460 volts. Includes: stainless steel demethanizer column, BRAND RICSA, maximum pressure 752.3 at 150 °F, minimum temperature -205 °F at 752.3 PSI, nominal capacity 2069 gallons, internal diameter 36", height 450", weight 27,677 lbs, NB 1167, YEAR 2018 + Nitrogen gas storage tank, BRAND RICSA, maximum pressure 889.4 PSI / FV (Full Vacun) at 150 °F, minimum temperature -200 °F at 889.4 PSI, internal diameter 42", length 132", 875 gallons, empty weight 9,931 lbs, YEAR 2018, NB 1165 + 2 packed dehydration columns + 4-pass heat exchanger, BRAND Chart Energy & Chemicals INC., design pressure 750 PSI, temperature 150 °F, minimum temperature -320 °F, SERIAL NO. 3054.3-3, YEAR 2017, NB 9523 + 1-pass heat exchanger, BRAND Chart Energy & Chemicals INC., design pressure 750 PSI, temperature 150 °F, minimum temperature -320 °F, SERIAL NO. 30542-2, YEAR 2017, NB 9517 + 1-pass heat exchanger, BRAND Chart Energy & Chemicals INC., design pressure 750 PSI, temperature 150 °F, minimum temperature -320 °F, SERIAL NO. 30541-1, YEAR 2017, NB 9513. Associated lots: 441, 442, 443, 444, 445, 446, 447, 448. Sistema de purificación de Gas Metano (Separación de gas natural por medio de deshidratacion, extracción de humedad y separación) Marca PSB INDUSTRIAS INC. Modelo X-1060-SP, Serie 360420. . Año 2017. Temperatura de entrada de operación 90F, Metano W/5444SCFM 600 PSI, 460 Voltios. Incluye: Columna Demetanizadora Marca RICSA, enn Acero Inoxidable, Presion Maxima 752.3 a 150 °F, Temperatura Minima -205 °F con PSI 752.3, Capacidad Nomil 2069 galones. Diametro interno 36", Altura 450", peso 27,677 Lbs. NB 1167. AÑO 2018 + Tanque de almacenamiento de Gas Nitrogeno, Marca RICSA, Presion Maxima 889.4 PSI / FV (Full Vacun) 150 °F. Temperatura minima - 200 °F a 889.4 PSI. Diametro interno 42" , Largo 132" 875 galones. Peso vacio 9,931 lbs, Año 2018 NB 1165 + 2 Columnas Empaquetada Deshidratadoras + Intercambiador de Calor de 4 pasos, Marca Chart Energy & Chemicals INC. Diseño de preison 750 PSI, Temperatura 150 °F, Temperatura minima -320 °F. Serie 3054.3-3, Año 2017. NB 9523 + Intercambiador de Calor de 1 paso, Marca Chart Energy & Chemicals INC. Diseño de preison 750 PSI, Temperatura 150 °F, Temperatura minima -320 °F. Serie 30542-2, Año 2017. NB 9517 + Intercambiador de Calor de 1 paso, Marca Chart Energy & Chemicals INC. Diseño de preison 750 PSI, Temperatura 150 °F, Temperatura minima -320 °F. Serie 30541-1, Año 2017. NB 9513. Lotes de anexo: 441, 442, 443, 444, 445, 446, 447, 448. Iedpsz Sva Tsfx Acpebc

Condition: used, Used, two-story container system from the manufacturer GRAEFF. Manufacturer: GRAEFF GmbH Type: 2917.1 Design: Two-story container system Number of containers: 14 Ibjdpoz Srvkjfx Acpsc Total length: approx. 21.00 m Total width: approx. 7.50 m Floors: 2 Height of one container: 3.40 m Previous use: Chemistry and physics lessons Room layout: Classrooms, preparation rooms, technical rooms, and hallways Equipment: Laboratory tables, sinks, base cabinets, media supply via ceiling-mounted systems, lighting, and electrical installations Windows: With roller shutters Access: External steel staircases with railings Plans: Floor plans and site plan available

Condition: new, functionality: fully functional, fuel type: diesel, unused – new in box Kubota V2403-CR-TE5B-EU-X8 Four-cylinder turbo diesel common rail engine Maximum gross power of 48.6 kW at 2700 rpm Includes: 12V electrical system ECU (separate) Kubota flywheel and flywheel housing Fuel coarse and fine filter (separate) Electric fuel lift pump (separate) DPF diesel particulate filter (fixed position on flywheel housing) Iodpfez Sqt Iex Acpobc Air filter incl. MAF sensor (with calibrated intake hose in fixed position) Standard suction cooling fan (separate)

Condition: used, For sale: one Dräger PSS BG4 self-contained breathing apparatus (SCBA). This is a professional, closed-circuit regenerative breathing apparatus designed to protect the respiratory system during demanding rescue operations. Features: * Manufacturer: Dräger * Model: PSS BG4 * Oxygen supply from a cylinder. * Backpack design with harness and waist belt. * Applications: mine rescue, fire fighting, and industrial rescue. Included equipment: Ibedoz Spg Aspfx Acpsc * Cylinder with valve, * Breathing hoses, * Breathing bag, * Internal apparatus components, * Frame with harness. Condition: used, with visible signs of wear.

Condition: new, Hensoldt Wetzlar ZKG 7x35 Bundeswehr optical set + Iedsz Smzcepfx Acpebc

Condition: new, For sale: Professional carrying harness for self-contained breathing apparatus (SCBA) Dräger PSS 7000 • Model: PSS 7000 • Pressure gauge: up to 300 bar • Part No: 3355850 • Type No: 3355068 • Technical condition: good • Complete set of straps and buckles • Sturdy frame with no cracks Iedpfx Acoz Smy Sepobc Selling exactly what is shown in the photos. No cylinder or face mask included. Firefighter-grade equipment – top series from Dräger.

Condition: excellent (used), A machine for screening and sorting bulk materials or small metal parts. In very good condition – complete, with original drive, control cabinet, and a set of calibration sieves. • Manufacturer: SCHWANOG Günter KG, Villingen / Black Forest • Model: RAPID SBM 63G • Year of manufacture: 1972 • Drive: Bauknecht 0.55 kW motor, 380/220 V, 2850 rpm Ibsdpfsz Slhzex Acpoc • Control cabinet: Carl Kurt Walther GmbH, Wuppertal • Steel construction, stable frame with transport wheels • Three-phase 400 V power supply • Complete set of screening sieves in wooden frames (numbers 1–6) • Sieve mesh range: from 2 mm to 15 mm • Adjustable and replaceable sieves • Main switch, start/stop control, and overload protection • In very good condition – removed from a factory, mechanically functional. The machine is ready for operation after a basic inspection. Ideal for: metalworking plants, foundries, industrial laboratories, sorting granules, sand, or parts.

Condition: good (used), Year of construction: 2011, BERKEFELD, maxi-RO 14.1000-EP industrial reverse osmosis system for highly efficient desalination and water purification – used: Isdpfx Acsz Sd Itepebc Price upon request or by offer! Manufacturer: BERKEFELD Type: maxi-RO 14.1000-EP Year of manufacture: 2011 Identification number: 541.603 Permissible operating overpressure: 12-14 bar Flow rate: 950-1,100 l/h Permissible ambient temperature: 35 degrees Condition: good Available: immediately Location: Bünde, North Rhine-Westphalia

Condition: good (used), Year of construction: 2012, Approx. 170 units, pneumatic drive, spool valve, M&S, PAMS1 – used: Price per unit, ex works: €300.00 (net)! Iedpfx Asz Sdyiscpjbc Manufacturer: M&S Type: PAMS1 Year of manufacture: 2012 Spring (normally closed) Operating pressure: 4.8 - 8 bar Air consumption: 1.2 – 2 L/stroke Condition: good Available: immediately Location: Bünde, North Rhine-Westphalia

Year of construction: 2022, operating hours: 39 h, condition: like new (used), functionality: fully functional, machine/vehicle number: IPRTTJ22Z144, ISOblow Prof Twin Turbo – Mobile unit including complete hose set, lance set, and woven sack for blowing in - 2 turbines generate a very high air flow rate - Also ideal for wood fiber insulation materials - Electronically controlled material slide - Easy filling via large filling flap Ibjdsz R Ut Ropfx Acpec - High capacity of the hopper - Material hopper with 4 loosening shafts - Very good loosening, even with tightly compressed bales - Ideal for large construction sites and use in prefabrication - 1 x 400 V 16 A connection is sufficient

Condition: used, Width: 60 cm Complete roll forming line equipped with tools for the production of a new type of industrial gutter for galvanized steel/stainless steel CE compliant Uncoiler capacity: 2 metric tons Maximum width: 600 mm Coil inner and outer diameters: 508–920 mm Hydraulic claw extension: 460 > 640 mm 4 kW Iodpoz R S T Ujfx Acpobc Roll Forming Line Type H 18 stations Maximum width: 600 mm Maximum thickness: 0.8 mm Shaft diameter: 60 mm Maximum center-to-center shaft distance: 300 mm Siemens Simatic touchscreen control + Ethernet connection 7.5 kW Hydraulic shear Force: 5 metric tons Condition: machine has seen very little use Online auction of metalworking machines, woodworking machines, overhead cranes, workshop equipment, and lumber inventory, including an AMADA Arcade 210 CNC punch and nibbler, MAZAK VTC-41L and MT-V-515 vertical CNC machining centers, MAZAK Super Turbo-X 48 Mk II CO₂ laser cutting machine, BYSTRONIC Byjet 4022 CNC waterjet cutting machine, TECNOMA profiling and roll forming machines, ELUMATEC and EMMEGI aluminum sawing machines, HACO ERMS 200-metric-ton CNC press brake, ADIRA CNC press brake, LEFORT C 265T hydraulic scrap baler/shear combination, ESAB Pegasus CNC plasma cutting machine, GEMA powder coating machine with drying oven and exhaust system, EURO-MAC punching and nibbling machine, various KONE and DEMAG overhead cranes, VECOPLAN industrial shredder, NEDERMANN filter unit, METORA band saw, various metalworking and woodworking machines, panel saws, edge banders, milling machines, drills, compressors, workbenches, teak beams, sawn logs, and various accessories, etc. The online auction opens Wednesday 14 October and closes Thursday 5 November. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 3 November Pickup days are on: - Tuesday 10 November - Thursday 12 November Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, Empty weight: 8.700 kg Dimensions (LxBxH): 90 x 72 x 110 cm Serial number: 98077 Control system: Mazatrol M32B X-axis: 1050 mm Y-axis: 510 mm Z-axis: 560 mm Work table dimensions: 1300 × 550 mm Maximum load: 1,500 kg Spindle: Taper: BT50 / CAT50 Speed: 25 – 6,000 rpm Power: 15 kW / 18.5 kW (peak) Tool changer: 1 Capacity: 30 tools Weight: 8,700 kg Power supply: 380 volts Overall dimensions: 3,000 × 3,800 × 2,250 mm Includes: Matching tool cabinet with various tool holders Tool cabinet dimensions: 900 x 720 x 1100 mm Online auction of metalworking machines, woodworking machines, overhead cranes, workshop equipment, and lumber inventory, including an AMADA Arcade 210 CNC punch and nibbler, MAZAK VTC-41L and MT-V-515 vertical CNC machining centers, MAZAK Super Turbo-X 48 Mk II CO₂ laser cutting machine, BYSTRONIC Byjet 4022 CNC waterjet cutting machine, TECNOMA profiling and roll forming machines, ELUMATEC and EMMEGI aluminum sawing machines, HACO ERMS 200-metric-ton CNC press brake, ADIRA CNC press brake, LEFORT C 265T hydraulic scrap baler/shear combination, ESAB Pegasus CNC plasma cutting machine, GEMA powder coating machine with drying oven and exhaust system, EURO-MAC punching and nibbling machine, various KONE and DEMAG overhead cranes, VECOPLAN industrial shredder, NEDERMANN filter unit, METORA band saw, various metalworking and woodworking machines, panel saws, edge banders, milling machines, drills, compressors, workbenches, teak beams, sawn logs, and various accessories, etc. The online auction opens Wednesday 14 October and closes Thursday 5 November. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 3 November Iodpfsz R S Tujx Acpebc Pickup days are on: - Tuesday 10 November - Thursday 12 November Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Year of construction: 1993, condition: used, Year of construction: 1993 Empty weight: 9.300 kg Dimensions (LxBxH): 442 x 280 x 195 cm Serial number: 210045 Year of manufacture: 1993 Cutting force: 20 metric tons, 200 kN Maximum sheet thickness for punching and nibbling: 6.4 mm Maximum punch diameter: 88.9 mm Working range in the transverse direction (X-axis): 1,270 / 2,540 mm Working range in the longitudinal direction (Y-axis): 1,000 mm Control system: Fanuc 16P Tool changer: yes Number of tool stations: 19 positions (16 fixed + 3 index) Required power capacity: 23 kVA Turret revolver with 16 + 3 x Auto Index Holders Length: 4,425 mm Width: 2800 mm Height: 1950 mm Weight: 9300 kg Central lubrication: yes Condition: fully serviced and overhauled Additional loading charges may apply Ijdpfx Ajz R S Thjcpebc Online auction of metalworking machines, woodworking machines, overhead cranes, workshop equipment, and lumber inventory, including an AMADA Arcade 210 CNC punch and nibbler, MAZAK VTC-41L and MT-V-515 vertical CNC machining centers, MAZAK Super Turbo-X 48 Mk II CO₂ laser cutting machine, BYSTRONIC Byjet 4022 CNC waterjet cutting machine, TECNOMA profiling and roll forming machines, ELUMATEC and EMMEGI aluminum sawing machines, HACO ERMS 200-metric-ton CNC press brake, ADIRA CNC press brake, LEFORT C 265T hydraulic scrap baler/shear combination, ESAB Pegasus CNC plasma cutting machine, GEMA powder coating machine with drying oven and exhaust system, EURO-MAC punching and nibbling machine, various KONE and DEMAG overhead cranes, VECOPLAN industrial shredder, NEDERMANN filter unit, METORA band saw, various metalworking and woodworking machines, panel saws, edge banders, milling machines, drills, compressors, workbenches, teak beams, sawn logs, and various accessories, etc. The online auction opens Wednesday 14 October and closes Thursday 5 November. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 3 November Pickup days are on: - Tuesday 10 November - Thursday 12 November Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, Empty weight: 6.000 kg Serial number: 102356 Year of manufacture: 1992 X-axis: 1660 mm Y-axis: 410 mm Z-axis: 510 mm Control system brand: Mazatrol Clamping table dimensions: 2000 × 410 mm Maximum load: 800 kg Spindle: Taper: ISO 40 / CAT 40 Speed: 40 – 7,000 rpm Power: 11 kW (15 PK peak) Tool changer: 1 Capacity: 24 tools Weight: 6,000 kg Electrical: 230/460 V Dimensions: approximately 4,000 × 2,900 × 3,000 mm Online auction of metalworking machines, woodworking machines, overhead cranes, workshop equipment, and lumber inventory, including an AMADA Arcade 210 CNC punch and nibbler, MAZAK VTC-41L and MT-V-515 vertical CNC machining centers, MAZAK Super Turbo-X 48 Mk II CO₂ laser cutting machine, BYSTRONIC Byjet 4022 CNC waterjet cutting machine, TECNOMA profiling and roll forming machines, ELUMATEC and EMMEGI aluminum sawing machines, HACO ERMS 200-metric-ton CNC press brake, ADIRA CNC press brake, LEFORT C 265T hydraulic scrap baler/shear combination, ESAB Pegasus CNC plasma cutting machine, GEMA powder coating machine with drying oven and exhaust system, EURO-MAC punching and nibbling machine, various KONE and DEMAG overhead cranes, VECOPLAN industrial shredder, NEDERMANN filter unit, METORA band saw, various metalworking and woodworking machines, panel saws, edge banders, milling machines, drills, compressors, workbenches, teak beams, sawn logs, and various accessories, etc. The online auction opens Wednesday 14 October and closes Thursday 5 November. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 3 November Ijdpjz R S S Rsfx Acpebc Pickup days are on: - Tuesday 10 November - Thursday 12 November Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: not inspected (used), Foam dispensing machine, manufacturer: Storopack, type: MD 50, year of manufacture: 2005, with dosing pump, weight: 225 kg, mobile. Ibjdpfx Acoz R Np Topoc

Year of construction: 2025, condition: like new (used), For sale is a mobile dust extractor from the manufacturer Blotenberg, model FILTERBLOC MOBIL-3000, with 0 operating hours. The unit has sustained minor damage, presumably from a collision, but this is not expected to affect its functionality. Manufacturer: Blotenberg Model: FILTERBLOC MOBIL-3000 Ibodpfx Aez R Dhpjcpsc Date of manufacture: 04/2025 Article number: OEM-7094 Power: 3.0 kW Voltage: 400 V Phases: 3P+PE Frequency: 50 Hz Protection class: IP55 Nominal air volume: 3,200 m³/h Max. negative pressure: 2,500 Pa Max. raw air connection: Ø 224 mm Filter area: 20 m² Weight: 180 kg Operating hours: 0 h Design: Mobile, can be moved Application: Extraction of dry, free-flowing dust and fumes Condition: Unused, with minor collision damage Documentation: Operating and maintenance manual available