CEMAC Zerspanungstechnik

Condition: used, Year of construction: 1999, x-travel 800 mm y-travel 700 mm Fodpfxoxmtvcj Afpegh z-travel 600 mm Control Heidenhain TNC 426/ 430PB total power requirement 15 kW weight of the machine ca. 8,4 t

Condition: good (used), Year of construction: 2004, Hermle C 40 U Dynamic / 5 axes with automation, year of manufacture 2004, Heidenhain iTNC 530 control, travel X/Y/Z 850/700/500 mm, spindle speed up to 10,000 rpm, SK 40, 123-tool magazine, linear axes, NC swiveling rotary table Ø 800 mm, coolant through spindle 40 bar, belt filter, increased accuracy, thermal compensation, 3D touch probe, Blum laser, chip conveyor, automation / 4 pallets Ø 630 mm. Fgsdpfx Aoxmg T Ujfpsh

Condition: used, Year of construction: 2005, Travel: X-885 mm, Y-600 mm, Z-600 mm Spindle speed: 0 - 18,000 rpm Spindle mount: HSK63 NC rotary table: 750 mm B-axis: -10 / +110 degrees tool magazine: 30 seats Internal coolant supply (IKZ): 40 bar chip conveyor: , probe: Heidenhain Control: iTNC530 Heidenhain operating mode: 4 Fgjdpfx Afexl Icuopsh

Condition: good (used), Year of construction: 2001, Hermle C 800 U optionally with automation, year of manufacture 2001, Heidenhain iTNC 530 control, travel X/Y/Z 800/600/500 mm, 2-axis NC swiveling rotary table Spreitzer 3-way, tool magazine with 87 stations, HSK 63 interface, laser tool breakage detection, 3D touch probe Renishaw, interface for automation, automatic door, oil mist extraction. OPTIONAL WITH AUTOMATION: 3-axis robot, System 3R SWE, year of manufacture 2014, magazine with 60 pallets, 23 pallets, zero-point clamping system 3R Macro, System 3R Macro with 40 centric clamps Spreitzer MZQ 110 - 60 PA. Fodpfxexlq T Ae Afpsgh

Condition: good (used), Year of construction: 2007, Chiron Mill 800 5 Axis with Automation, Year of manufacture 2007, Siemens 840 D control, Travel X/Y/Z 800/550/550 mm, 2 axes NC swivel/rotary table, 65-position tool changer, HSK 63 spindle interface, Spindle speed up to 12,000 rpm, Chip conveyor, Internal coolant supply, Paper band filter, Tool laser measurement, 3D measuring probe, Interface for automation, Automatic door, Oil mist extraction, AUTOMATION OPTIONAL Automation System 3 R / SWE, Year 2008, Zero-point clamping system 3 R GPS 240, 12 pallets System 3 R GPS 240, 6 mechanical centric vices Spreitzer MZS 260 - 125 A, 12 pallets System 3 R GPS 240, Fodpsxlq E Ssfx Afpsgh 6 mechanical centric vices MZU 170 - 60,

Condition: good (used), Year of construction: 2008, MIKRON UCP800 Duro 5-Axis Simultaneous Machining Center Year of manufacture: 2008 Control: HEIDENHAIN iTNC 530 Fgsdsxlcfwopfx Afpsh Machine no.: 107.44.00.188 Travel paths: X – 800 mm / Y – 650 mm / Z – 500 mm Rotary axis C – n*360° / Swivel axis A – +120°/-100° Spindle hours approx. 24,800 (as of 10.09.2025) Equipment: High-performance spindle STEP TEC 100 – 20,000 rpm / HSK-A63 Internal coolant supply through spindle (IKZ) Coolant system Rotary tilting table make RÜCKLE, type PKTS/3 Touch probe make RENISHAW OMP60 BLUM laser - separate laser measuring system Electronic handwheel Chip conveyor Paper band filter system make ARO 650 l Rotating inspection window Rotaclear Fully enclosed cabin 30-slot tool changer BRANKAMP CMS 100 smart machine Water chiller WK4003-C25 Machine mounting elements Scope of delivery includes: Operating manual/documentation For equipment, technical data, as well as transport & original manufacturer's brochure – see PDF. Images, content, and specifications are given without guarantee and are therefore not binding. All other accessories visible in the photos and video are not included in the scope of delivery and will not be part of this sale. The delivery only includes accessories that are expressly listed here, in the order confirmation, and on the invoice. FCA (Free Carrier, loaded on truck) D-73037 Göppingen Packaging only Immediate delivery Subject to prior sale / Payment due immediately upon conclusion of purchase

Condition: used, Year of construction: 2014, Technical details: x-travel: 800 mm y-travel: 950 mm z-travel: 1020 mm control: Sinumerik 840D sl MDynamics Operate turning speeds: 10.000 1/min Spindle power: 26/20 kW max. torque on the spindle: 340/262 Nm tool taper: HSK-A 100 tool change unit: 120 (2x60) Pos. Pallet changer 2x: 630 x 630 mm table load capacity: 800 kg weight of the machine ca.: 20 t dimensions of the machine ca.: 3,3 x 6,15 x 3,2 m 6-axis simultaneous horizontal machining center with controlled swivel-rotary table (A/B-axis), Swivel table can swing overhead (180°), that means the part is hanging down overhead and chips don’t accumulate on pallet, they can fall free into the chip conveyor CNC controlled U-axis enables radial movement of tool for variable spindling diamenter. twin pallet changer 630 x 630 mm 6 hydraulic couplings for pallet fixture clamping with rotary joint in A and B-axis special hydraulic pump for fixture coolant through spindle (10-80bar), one channel with proportional valve for pressures 10-200 bar, electromech. tool-length measuring device GROB, BLUM laser for tool measuring, tool coding, chip conveyor, 3D touch probe M&H, el. handwheel Siemens HT8 coolant gun, coolant shower, air gun, oilskimmer, automatic door Remote diagnosis A 6th axis MAPAL Tooltronic U-axis system comes with the machine with two heads: 1. LAT125-HSK100 2. LAT160-HSK100 Fgodpfx Afoxix Atopsh *

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 550 mm, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 85, 5-Axis CNC Vertical Machining Centre with 6-station Pallet Pool Hermle C42U New in 2013/2014 Heidenhain iTNC 530 CNC control IHS Pallet system for 6 pallets (6 x workpiece fixtures) Pallet size 400 x 400 mm 2-Axis NC Rotary Tilting Table Rotating axis C-Axis 360° - 0.001° Tilting axis A-Axis +/- 130° - 0.001° Working travels: X 800 mm Y 800 mm Z 550 mm 85 station ATC Spindle speeds to 18000 rpm New spindle replacement in 2019 and max. 300 hours run after replacement FULLY CHECKED by a Hermle service engineer in 06.2024 (test report available) Fgsdpfx Afsxg Nfgopoh Machine in EXCELLENT condition. Video live call possible NOTE: The machine is fitted with an automation system to change pallets of 400 mm. These pallets are not included. The previous owner used a “cone fixture” system, fitting their parts with the cone fixtures for automatic loading and unloading. The “cone fixtures” are included.

Condition: used, Year of construction: 2004, frequency 50 Hz weight of the machine ca. 2,510 t Fgodpsxgv D Asfx Afpjh 3-axis machining centre Microcut Challenger 2412 Technologies: Drilling / thread machining, form milling (3 D), milling, HSC milling without vice Table Size: 30" x 14.3" Max Table Load: 550 LBS X Axis: 24" Y Axis: 12" Z Axis: 20.47" Spindle Speed: 8,000 RPM Spindle Taper: 40 Spindle Motor: 5.5 HP ATC: 16

Condition: used, Year of construction: 2007, controller manufacturer: Heidenhain, controller model: iTNC 530, _____ Description: Year of manuf. : 2007 Control : Heidenhain iTNC 530 Speed : 42000 rpm Movement X/Y/Z : 800/600/500 mm Tool holder : HSK 40 In Generel: Technology:Automated graphite milling centre Components:2x 5-axis HSC milling centres + pallet system with robot Manufacturer:Mikron + EROWA Types:HSM 400 U + HSM 600 U + Robot Multi Twin Year of construction:2007 Control:Heidenhain iTNC 530 Speed:42,000 rpm Tool holder:HSK 40 Fgjdpexgpwcjfx Afpeh Machine I: Manufacturer:Mikron Type:HSM 600 U Traverse paths X/Y/Z:800/600/500 mm Spindle speed:42,000 Tool holder:HSK 40 B-axis:+30° / -110° C-axis:360° C-axis speed:360 rpm Clamping surface:Erowa UCP 320x320 mm Max. table load:120 kg Tool magazine:68 stations Machine II: Manufacturer:Mikron Type:HSM 400 U Traverse paths X/Y/Z:400/240/350 mm Spindle speed:42,000 Tool holder:HSK 40 B-axis:+ - 110° C-axis:360° C-axis speed:250 rpm Clamping surface:ITS 148 Powerchuck Table load max:25 g Tool magazine:36 stations Automation: Manufacturer:EROWA Type:Robot Multi Twin Gripper station:6 station, various gripper Round storage:5 levels Level 1-2:5x UCP 300x300 mm Level 3-4:15x ITS 148 Level 5:30x ITS 50 Equipment: Measuring systems:Direct in all axes Workpiece measurement:Infrared measuring probe Tool measurement:LASER Set-up mode:Electronic handwheel Graphite extraction:2x BURN WK 5806 Automation:Round pallet storage

Condition: excellent (used), Year of construction: 2006, operating hours: 10,000 h, functionality: fully functional, NEW ARRIVAL 1 CNC MILLING MACHINE HERMLE C 600V, Year 2006 CNC CONTROL: HEIDENHAIN ITNC 530 TRAVEL PATHS: 600 x 450 x 450 mm - INFINITELY VARIABLE SPINDLE SPEED UP TO 10,000 RPM - MACHINE WITH ELECTRONIC HANDWHEEL - PROBE - APPROX. 30 TOOL HOLDERS - COOLANT SYSTEM - FIXED TABLE, ETC. PRICE ON REQUEST plus 19% VAT, ex location, unpacked, uninsured Technical data as per attachment, non-binding - errors and prior sale excepted. Delivery: immediately – subject to prior sale. Payment: strictly net, immediately upon receipt of invoice, before removal/collection. Fjdpfxsxf Huvs Afpogh We are happy to show you the machine under power by arrangement, demonstrating all functions.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 17,797 h, functionality: fully functional, travel distance X-axis: 880 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 32, swivel angle B-axis (min.): -30 °, swivel angle B-axis (max.): 90 °, TECHNICAL DETAILS Control: MillPlus iT Heidenhain Fgedpfjxf A E Rex Afpoh X travel: 880 mm Y travel: 630 mm Z travel: 630 mm B axis: -30° / +90° C axis: available Spindle and Drive Spindle speed: 20 - 12,000 rpm Spindle taper: SK 40 DIN 69871 Torque at 40 % / 100 % duty cycle: 28 / 19 kW Table and Workpiece Table size: 1,250 x 700 mm Table load capacity: 650 kg NC rotary table: Ø 800 mm Tool Magazine Tool change system: 2 × 16 positions MACHINE DETAILS Operating hours: 43,802 h Spindle hours: 17,797 h Total power requirement: 44 kW Machine weight: 9.5 t Space requirements: 3.50 × 3.20 × 2.60 m Coolant system standard volume: 250 liters EQUIPMENT - Renishaw OMP60 probe - Rotoclear - Rinse gun - High-pressure pump - Chip conveyor - Air filtration system - ICS (internal coolant supply)

Condition: ready for operation (used), Year of construction: 2020, operating hours: 8,700 h, Control Unit Brand HEIDENHAIN Model TNC 640 Movement Fsdpfx Afjxfw A Depsgh X-Axis Movement 800 Y-Axis Movement 950 Z-Axis Movement 1020 Additional Equipment Accessories: Additional pallet + coolant cooling unit This 5-axis GROB G550a universal machining centre was manufactured in 2020. It offers advanced capabilities for complex machining tasks. Consider the opportunity to buy this GROB G550a universal machining centre. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 1998, operating hours: 12,745 h, Control Unit Brand HEIDENHAIN Model MillPlus Movement Fedexfml Ispfx Afpogh X-Axis Movement 800 Y-Axis Movement 560 Z-Axis Movement 450 This 5-axis DECKEL MAHO DMU 80P was manufactured in 1998. It features a Heidenhain MillPlus control system, a rotary table that can rotate and tilt by 45°, and a 90° swivel head. The machine offers a spindle speed of up to 12000 rpm and accommodates 60 tool positions. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMU 80P machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2013, operating hours: 21,900 h, functionality: fully functional, TECHNICAL DETAILS X-axis travel: 935 mm Y-axis travel: 850 mm Z-axis travel: 650 mm Control: Heidenhain ITNC530 Table Dimensions: 1,200 x 850 mm Table load: max. 4,000 kg Spindle: SK40 Fgedpfx Asxdk Nujfpoh Spindle speed: 18,000 rpm Tool system Magazine capacity: 30 Production package with belt filter and high-pressure coolant (IKZ) 40 bar.

Condition: good (used), Year of construction: 2000, Ref. -No.: 10468 Manufacturer: DECKEL MAHO Type: DMU 80 Year of construction: 2000 Control: Heidenhain Millplus Storage location: Halberstadt Country of origin: Japan Machine-No.: 111xxxxx X-Travel: 800 mm Y-Travel: 700 mm Z-Travel: 600 mm Number of T-slots: 9 / 14 Clamping Area: Ø 900 x 630 mm T - slot spacing: 63 mm Tool Taper: SK 40 Tool changer: 30 Spindle Speed: 12.000 RPM Fodjxdayiepfx Afpegh Max. Torque: 2659 Nm Operating hours: 67.452 H Center hole: Ø 50 mm Holding torque: 4500 Nm Max. rotation of the table top: 10,7 rpm Feed: 3600 °/min. Resolution of the measuring system: 0,001 ° NC rotary table: 800 kg NC swivel rotary table: 600 kg Further information: - Clamping table 900 x 630 mm - Chip conveyor, sheet metal technology - Belt filter system, manufacturer Interlit - Type SK 200-760 - Oil mist separator - Set of tool holders, - Workbenches - 2x 6 drawers - Vise - Jaw width 125 mm - Roller shutter cabinet with 1 door The machine can be viewed under power by arrangement.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 704-0101-809, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 510 mm, rotational speed (max.): 12,000 rpm, number of slots in tool magazine: 32, swivel angle C-axis (max.): 360 °, TECHNICAL DETAILS Control: ULTIMAX 4 X-axis: 800 mm Y-axis: 700 mm Z-axis: 510 mm Rapid traverse (X/Y/Z): 35 m/min A-axis: ± 30° / 110° Fodpfxsxamfke Afpegh Rapid traverse A-axis: 16.5 m/min C-axis: 360° Rapid traverse C-axis: 16.5 m/min Spindle Speed range: 10 - 12,000 1/min Spindle motor: 18 kW Tool Tool holder: SK 40 Tool stations: 32 Working area Max. table load: 300 kg Table size: 610 mm x 5 mm x 5 mm MACHINE DETAILS Machine weight: 12,500 kg Space required (LxWxH): 2.700 m x 4.000 m x 3.250 m

Condition: good (used), Year of construction: 2004, travel distance X-axis: 600 mm, Type: DMC 60 U Hi-dyn Fgsdew Sd Iuspfx Afpsh Year of manufacture: 2004 Number of axes: 5 Pallets: 2 Tool holder: SK 40 Tool changer: 120 positions Travel paths: x 600 mm y 700 mm z 600 mm Table: 2 pallets Speed range: 12,000 rpm Control: TNC 530 Equipment: Internal coolant supply (IKZ) Chip conveyor Baluff tool measurement system Spindle hours: approx. 11,000 h Internal cooling: yes

Condition: good (used), Year of construction: 2012, operating hours: 16,262 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 510 mm, rotational speed (max.): 12,000 rpm, overall weight: 13,500 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 16,262 h, tool length: 310 mm, tool diameter: 125 mm, Equipment: chip conveyor, rotational speed infinitely variable, Hurco VTXU 5-Axis Machining Center Year of manufacture / Commissioning: 09.2012 Power-on hours: 39,670 h Spindle hours: 16,262 h Machine weight: approx. 13 tons Control: Hurco Winmax, version: V08.01.09.25 Spindle taper: SK40 Maximum spindle speed: 12,000 rpm Torque: 237 Nm at 720 rpm - External coolant supply - Internal coolant supply through the spindle - Compressed air through the spindle - Chip conveyor Tool changer: 48 positions - Max. length 310 mm - Max. Ø 80 mm / Ø125 with free adjacent slot Travel paths: X-axis: 800 mm Y-axis: 700 mm Z-axis: 510 mm Fedsw Rfl Sopfx Afpogh C-axis: 360° A-axis: -30° / +110°

Condition: excellent (used), Year of construction: 2000, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, 5-axis CNC machine (VMC) DECKEL MAHO - DMU80P MACH-ID 9194 Make: DECKEL MAHO Type: DMU80P Control: HeidenHain TNC430 Fedpfew Rdl Dsx Afpsgh Year: 2000

Condition: excellent (used), Year of construction: 2000, Table clamping surface: 600 x 300 mm Travel range: X 350 Y 250 mm Adjustment range W-axis (motorized): 200 mm Servo-controlled EDM axis Z: 340 mm Drilling with electrodes from Ø 0.2 to 4 mm Max. workpiece weight: 300 kg Fgsdpsw Hyfyefx Afpsh Connected load: 3.5 kVA Machine weight: 700 kg

Condition: used, Year of construction: 2011, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 1,020 mm, travel distance Z-axis: 1,020 mm, overall weight: 20,000 kg, GROB G550 with Heidenhain iTNC 530 control, used machine, year of manufacture 2011 Fodew Hx Exspfx Afpegh 4/5-axis rotary swivel table with T-slots, 52 kW, 12,000 rpm, 83 Nm, HSK 63 tool holder, tool changer with 60 slots Equipment: safety enclosure/scratch-resistant glass - through-spindle air - grey/blue paintwork - spindle cooler - machine light - chip conveyor - coolant system - internal coolant supply 80 bar - 3D probing system - rinsing/air gun - tool cleaning system - work area extraction - electronic handwheel - remote machine diagnostics preparation - 3D model - Kinematic Opt - collision monitoring DCM - Balluff BIS C - GROB spindle diagnostics GSD The machine can be inspected under power!

Condition: used, Year of construction: 1999, x-travel 800 mm y-travel 700 mm z-travel 600 mm NC-rotary table ø 900 x 630 mm spindle taper SK 40 spindle turning speed - stepless 20 - 12.000 U/min feeds x/y/z -stepless 20 - 10.000 mm/min rapid travel x/y/z 24 m/min control HEIDENHAIN, TNC 426 NC-rotary table - speed - max. 10,7 U/min NC-rotary table - feed - 3600 °/min table load capacity max. 800 kg no. of tools in magazin 30 tool diameter if 2 vacant positions 160 mm tool diametre at full load 100 mm tool length - max. 315 mm weight of tools max. 10 kg total power requirement 44 kVA = 5 axis (simultan) machining center - NC rotary table = C-axis - univ. milling head = B-axis Accessories: 30 tool fixtures, electron. hand panel, chip conveyor, coolant with filtration Fgedpfxew Eyhfo Afpeh

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, 2015 Made Grob Axel Machining Centre in very good condition Fgsdpfx Aow Etzljfpeh

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: U255805501002, travel distance X-axis: 800 mm, travel distance Y-axis: 950 mm, travel distance Z-axis: 1,020 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 12,000 rpm, coolant supply: 23 bar, number of slots in tool magazine: 60, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Highlights: - Geometrie replaced - A/B axis replaced - Ready 2 Go ___ Basic machine G550 Generation 0 Travel path of the X-axis 800.0 mm Travel path of the Y'-axis 950.0 mm Travel path of the Z-axis 1020.0 mm Power supply 400 V, 50 Hz, TN-S Compressed air system, operating pressure 5 bar, minimum inlet pressure 5 bar Decentralized mist collector unit for the work area Work area door, manually operated, for manual loading/unloading Fgodpew El N Iefx Afpeh HEIDENHAIN iTNC 530 machine control Tilting table unit (A'-axis) Rotary table with T-slots (B'-axis) Motorized spindle HSK-A 63, 12,000 rpm, 64/83 Nm, 40/52 kW Single disk-type tool magazine HSK-A 63 with 60 tool pockets Tool cleaning device Electromechanical tool breakage detection device High-pressure cutting fluid system (23 bar, ICS) Cutting fluid low-pressure system Cutting fluid recirculation on weekends Oil skimmer for cutting fluid care Air gun at the work area Flush gun at the work area Work area lighting Machine paintwork according to GROB standard Machine cooling system with air-cooled cooling unit Operating/environmental conditions according to GROB standard Electrical equipment according to EU GROB standard Optimizing the machine kinematics with KinematicOpt Infrared measuring probe OMP60 (RENISHAW) Remote machine diagnostics 3-month warranty