Celik GmbH

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 610 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis Hurco VMX24 vertical machining centre was manufactured in 2004. It features an impressive X-axis travel of 610 mm and Y-axis travel of 508 mm, with a maximum spindle speed of 10,000 RPM. The machine includes advanced control options such as synchronous tapping and advanced velocity control. If you are looking to get high-quality machining capabilities, consider the Hurco VMX24 vertical machining centre we have for sale. Contact us for further details. - CNC Control: Ultimax (Dual-screen console configuration)- System Software Version: 2.37.03e (Patch j) Oct 7 2013- Machine Class: Vertical- Machine Hour Meter: 0.0 (System screen value)- Spindle Hours: 10,500 h (Per text listing)- X-Axis Travel Limit (Plus): 610 mm- X-Axis Travel Limit (Minus): 0 mm- Y-Axis Travel Limit (Plus): 508 mm- Y-Axis Travel Limit (Minus): 0 mm- Z-Axis Travel Limit (Plus): 0 mm- Z-Axis Travel Limit (Minus): -610 mm- Maximum Spindle Motor Speed: 10000 RPM- Maximum Spindle Tool Speed: 10000 RPM- Maximum Rapid Traverse: 30000 mm/min- Maximum Contouring Feedrate: 15240 mm/min- AC Voltage: 400 V, 3-Phase- Frequency: 50 Hz- Largest Motor Rating: 7.5 kVA- Full Load Rating: 18 kVA- Interrupt/Breaking Capacity: 10000 Amps- Country of Manufacture: Taiwan- Control Options Installed: 1. Pocket with Islands, 2. DXF, 3. Synchronous Tapping, 4. UltiNet, 5. Advanced Velocity Control, 6. Ramp/Helix Entry- Structural Upgrades: New bearings fitted on X and Y axes- Exclusions: Vise, tools, and other shown accessories are not included Godezc R Atjpfx Aagjbn

Condition: ready for operation (used), Year of construction: 2015, operating hours: 9,000 h, travel distance X-axis: 610 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, controller manufacturer: HURCO, controller model: WinMax / MAX5, table width: 508 mm, table length: 760 mm, table load: 1,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 9,000 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Hurco VMX 24i was manufactured in 2015. It features an X-axis travel of 610 mm, Y-axis travel of 508 mm, and Z-axis travel of 610 mm. The machine includes a robust table size of 760 x 508 mm and a maximum table load of 1,500 kg. If you are looking to get high-quality machining capabilities, consider the Hurco VMX 24i vertical machining centre we have for sale. Contact us for further details. Gedpfx Aszc Rzisagobn - Tool Holder: SK40 / CAT40- Max. Torque: 95 Nm- Max. Tool Diameter: 80 mm- Max. Tool Length: 300 mm- Max. Tool Weight: 7 kg- Rapid Traverse X/Y: 38 m/min- Rapid Traverse Z: 32 m/min- Additional Equipment: Automatic centralized lubrication, Chip flushing system, Scraper belt conveyor, Coolant unit, Electronic handwheel, Network connection- Included in Delivery: CNC milling machine Hurco VMX 24i- Excluded Items: Vise, tools, clamping devices, other accessories

Condition: good (used), Year of construction: 2014, functionality: fully functional, Hurco VM 20 i, Year of manufacture: 2014, Control system: Winmax, Travel range X/Y/Z: 1016/508/400 mm, Gbedpfezc Icwsx Aagon Tool changer: 24-position, Tool holder: SK 40, Spindle speed: up to 12,000 rpm, Chip conveyor, Approximately 11,000 operating hours.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, controller manufacturer: Fanuc, controller model: 0iMF, total height: 2,700 mm, total length: 2,200 mm, total width: 3,400 mm, table width: 500 mm, table length: 1,100 mm, overall weight: 5,500 kg, Leadwell V42iF Machining Center - Table dimensions: 1,100 x 500 mm. - Travels: 1,000 x 520 x 610 mm. - Spindle: BT-40 / 10,000 Rpm. - 24-position random tool changer. - Chip conveyor. - Internal coolant system. - 4th axis rotary table. - Fanuc 0iMF control (Manual Guide i). - Year: 2020. Gedpfszczutex Aagebn

Condition: used, Year of construction: 2011, number of spindle speeds 18.000 U/min NC rotary indexing table Ø 630 mm control HEIDENHAIN - iTNC 530 numbers of positions in the tool changer 32 tool taper SK 40 5-axis simultaneous machining center | HERMLE - C 30 U equipped with ITC (80 bar), NC swivel rotary table, tool changer & chip conveyor. The machine has only 13.924 H spindle hours. The machine is in a well-maintained condition and can be inspected under power at any time. Godpezczhaefx Aagjbn Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C30U | C-30U | C-30 U

Condition: good (used), Year of construction: 2007, operating hours: 34,000 h, functionality: fully functional, travel distance X-axis: 610 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 20 m/min, total height: 2,500 mm, total length: 3,500 mm, total width: 2,400 mm, overall weight: 4,700 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 15,000 rpm, Equipment: chip conveyor, Control system: Ultimax 4 Distance from spindle center to table: 150 - 760 mm Drive power – main spindle: 7.5 kW Tool holder: SK 40 Godpszcu R Uofx Aagobn Table clamping area: 760 x 510 mm Max. table load: 700 kg Tool changer with 24 stations

Condition: used, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, controller manufacturer: Hurco, controller model: WinMax, workpiece weight (max.): 681 kg, total height: 2,519 mm, total length: 1,800 mm, total width: 1,671 mm, table width: 406 mm, table length: 762 mm, table load: 681 kg, overall weight: 2,818 kg, spindle speed (max.): 10,000 rpm, distance table to spindle center: 101 mm, distance table center to spindle nose: 610 mm, spindle motor power: 11 W, spindle nose: ISO40, number of spindles: 1, number of slots in tool magazine: 20, tool length: 25 mm, tool diameter: 89 mm, tool weight: 7 g, Equipment: chip conveyor, documentation/manual, Used Hurco VM10i vertical machining center, ideal for companies seeking precision, reliability, and productivity with a reasonable investment. This machine is perfect for mechanical workshops, subcontractors, and manufacturers of components for automation, automotive, hydraulics, and general mechanical applications. It features a robust structure, high precision, and excellent performance in milling, drilling, and tapping operations. The machine is in good working condition and ready for immediate integration into production. Available for inspection and testing at our facility. The machine is complete with: * Auger-type chip conveyor with side discharge * High-pressure pump * Digital manuals * CE declaration of conformity Gjdpfozcpu Ijx Aagebn

Condition: good (used), Year of construction: 1995, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, x-travel 1000 mm y-travel 600 mm z-travel 600 mm Control: Heidenhain TNC 426 Spindle nose: 100–700 mm Work table: 1,080 x 580 mm Max. workpiece weight: 550 kg T-slots: 7 pcs. T-slot width: 14 mm Tool magazine with 36 positions Max. tool weight: 8 kg Max. tool length: 340 mm Gedpfx Ajzcn Dhoagjbn Machine weight approx. 6.2 t Space requirement approx. 4,790 x 5,330 x 2,905 mm

Condition: ready for operation (used), Year of construction: 2007, operating hours: 36,012 h, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 510 mm, controller model: 3D Heidenhain i TNC 530, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 635 mm Travel range, Y-axis: 460 mm Travel range, Z-axis: 510 mm Spindle speed range: 20 - 10,000 rpm Table dimensions: 790 x 560 mm Table load capacity: 600 kg Tool holder: SK 40 Godpfezb Dzmox Aagebn Number of tool magazine slots: 20 MACHINE DETAILS Control system: 3D Heidenhain i TNC 530 Total power consumption: 13.9 kW Operating hours (according to counter) Spindle hours: 36,050 h Power-on hours: 91,000 h Dimensions & Weight Dimensions (L x W x H): 3,000 x 2,000 x 2,150 mm Machine weight: 3.6 t

Condition: used, Year of construction: 2001, controller manufacturer: Heidenhain, controller model: MillPlus, _____ Description: Year of manuf. : 2001 Control : Heidenhain MillPlus Speed : 18000 rpm Movement X/Y/Z : 630/560/560 mm Tool holder : SK 40 Spindle: Technology:Motorspindle Speed:18.000 rpm Power (max.):35 kW Torque (max.):119 Nm Taper:SK40 Gjdpfx Aezbzchjagobn Workingtable: Clamping surface:1.000 x 600 mm Tableloading (max.):400 kg In general: Toolmagazine:2x 10 stations Rapid travers in X/Y/Z:26/26/20 m/min Equipment/Accessory: Chipmanagement:Chiptrumpet Coolingmanagement:Cooling unit Oilmistseparation:Mechanical extraction, Hör AFS 1100 4.-Axis:Magerl Rotomatik 120 with Counterbearing Processobservation:Operation mode 4 Setup operations:Electronical handwheel Further Equipment:Spindlechiller, Rinsing pistol Further Accessory:Misc. used Toolholder SK 40

Condition: excellent (used), Year of construction: 2007, operating hours: 2,777 h, functionality: fully functional, Controller ULTIMAX 4 DSM Table size 762 x 355 mm X-travel 660 mm Y-travel 356 mm Z-travel 456 mm Spindle speed 10000 rpm Tool holder type SK40 ATC-Magazin 16-fold Spindle power 11/9,4 kW Weight 2800 kgs Dimensions LxWxH = 1800 x 1600 x 2500 mm Accessories, features - Software options: DXF, rigid tapping, pocket/island, herical/ramp - Chip auger Gbsdezbx Dpjpfx Aagjn - Coolant tank - Machine mounths - RENISHAW zero point presetter system with touchprobe - Some SK40 toolholders - Towel lamp The machine has been checked by HURCO engineer. RENIOSHAW ballbar test has been made on X-Y axes and shows 13 um (like at new machine). Original spindle hours 2777!!!! Very good condition.

Condition: excellent (used), Year of construction: 2007, travel distance X-axis: 1,135 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 90,000 m/min, rapid traverse Y-axis: 90,000 m/min, rapid traverse Z-axis: 90,000 m/min, controller manufacturer: HeidenHain iTNC530, total height: 3,300 mm, total length: 3,700 mm, total width: 3,200 mm, rotary table diameter: 950 mm, overall weight: 12,500 kg, spindle speed (min.): 28,000 rpm, spindle motor power: 25,000 W, 5-axis CNC machine (VMC) DMG MORI - DMC V105 Linear MACH-ID 9641 Make: DMG MORI Type: DMC V105 Linear Control: HeidenHain iTNC530 X - Travel: 1135mm Y - Travel: 1050mm Z - Travel: 700mm A - Axis: -10 to +110° B - Axis: 360000° Table Ø: 950mm Feed rate X-Axis: 90000mm/min. Feed rate Y-Axis: 90000mm/min. Gbodpfozbr D Aox Aagen Feed rate Z-Axis: 90000mm/min. Spindle Taper: HSK63ISO/Bt/Mk Power on spindle: 25kW Speeds / ranges: 28000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 5 Chip conveyor: yes Coolantsystem: yes Length: 3700mm Width: 3200mm Height: 3300mm Weight: 12500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 828D, total height: 2,240 mm, overall weight: 3,500 kg, spindle speed (max.): 10,000 rpm, This 3-axis WAGNER WMC 600 L was manufactured in 2021, featuring a robust cast-iron frame and linear guides on all axes. It includes a Siemens 828 Basic ShopMill, an automatic double-arm tool changer with 16 stations, and a complete coolant system. The spindle supports speeds up to 10,000 rpm with a power of 11 kW. If you are looking to get high-quality milling capabilities consider the WAGNER WMC 600 L machine we have for sale. Contact us for more information. Additional equipment • Rigid cast-iron frame construction • Linear guides on all three axes • Automatic double-arm tool changer (16 stations) • Complete coolant system • Central automatic lubrication • Air blast system for spindle cleaning • Machine enclosure with doors • Machine and signal lights • Documentation in English • CE-certified Machine Benefits Qualitative Machine Benefits • Machine is in excellent condition. Technical Machine Benefits • Spindle motor power (siemens s6 40%): 11 kw spindle motor power (siemens s1 100%): 5. 5 kw • Tool magazine capacity: 16 tools • Tool holder: din 69871 a sk 40 • Maximum tool diameter: 89 mm • Maximum tool weight: 7 kg • Tool change time: 2 seconds • Chip-to-chip time: 7 seconds • Table clamping surface: 800 x 400 mm • Table load capacity: 300 kg Extra Information Machine still under power Dimensions Gjdpszbiw Tefx Aagsbn Machine Depth 2100 mm Technical Specification Taper Size SK 40

Condition: good (used), Year of construction: 2018, Traverses X Y Z: 660mm x 406mm x 508mm, table size 762mm x 356mm, 10000rpm spindle, 20 station ATC, Gbjdpfxezbitzj Aagjn BT40 spindle taper, Hurco WINMAX control, coolant.

Condition: excellent (used), Year of construction: 2021, Traverses X Y Z: 660 x 450 x 500mm, Table size 720mm x 420mm, table load 500kgs, spindle speed 12,000rpm, spindle motor power 28Hp, Siemens 828D Control with Shopmill, Gsdpfx Aaozbituogsbn rapid feed XYZ axis 24m/min, Spindle taper BT40, 12 station ATC

Condition: ready for operation (used), Year of construction: 2017, operating hours: 5,806 h, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D sl, workpiece height (max.): 630 mm, overall weight: 5,000 kg, spindle speed (max.): 12,000 rpm, number of axes: 3, This 4-axis DMG MORI CMX 600 V was manufactured in 2017. It features an X-axis travel of 600 mm, Y-axis travel of 560 mm, and Z-axis travel of 510 mm. The machine includes a table size of 900 x 560 mm and can accommodate a maximum workpiece weight of 600 kg. If you are looking to get high-quality machining capabilities, consider the DMG MORI CMX 600 V vertical machining centre we have for sale. Contact us for further details. • Table size: 900 x 560 mm Gedpfezbifwjx Aagjbn • Max workpiece length: 900 mm • Max workpiece width: 560 mm • Max workpiece weight: 600 kg • Connected load: 32 kVA • Supply voltage: 400 V, 50 Hz Additional equipment • Lehmann NC rotary table (4th axis) Technical Specification Taper Size HSK 40

Condition: good (used), Year of construction: 1998, functionality: fully functional, CNC Control: HEIDENHAIN MillPlus X mm: 600 Y mm: 700 Z mm: 550 B mm: -30 / +180 C degrees: 360 Number of pallets: 5 Table dimensions mm: 630 x 500 Table load capacity kg: 600 Cutting feed rate mm/min X, Y, Z: 10,000 Maximum rapid traverse rate m/min X, Y, Z: 30, 30, 30 Spindle speed rpm: 12,000 Spindle power kW: 15 Taper type: 40 Torque Nm: - Tool changer type: Chain Positions in tool changer: 60 Maximum tool diameter: mm: 100 Maximum tool diameter with adjacent positions empty: 160 Maximum tool length mm: 350 Maximum tool weight kg: 10 Coolant tank capacity l: 750 Coolant through spindle: Yes Gbjdjzbcy Ijpfx Aagsn Equipment: Chip extractor included 5-position automatic tool changer included Coolant through spindle included New spindle, 2024

Condition: excellent (used), Year of construction: 2010, Winmax control system Gbsdpfx Aajzatkujgjn Turning diameter 335 mm Turning length 750 mm Spindle speed 3000 rpm Tailstock 12-station turret with driven tools VDI 40 Chip conveyor, IRCO short bar loader IRS-RBK 1001 Tool measurement system Part catcher

Condition: used, Year of construction: 2008, • Commissioned: 2008 • Travel ranges X600 / Y450 / Z450 • Heidenhain iTNC 530 control system • Electric handwheel • Step-Tec HSK A63 spindle with 20,000 rpm • Internal cooling, 70 bar • 120-position tool magazine (ATC) • 7-position pallet changer, 3R 280 x 280 Dynafix • Blum laser tool measurement system • 3D probing system, M&H • Minimum quantity lubrication system • Band filter system, 600 liters • Chip conveyor • Visiport Godpfxezampqe Aagebn The machine will be available in October 2026.

Condition: good (used), Year of construction: 2009, 1 used vertical machining center Manufacturer: Mikron Type: HPM 600 HD Year of manufacture: 2009 Control system: Heidenhain ITNC 530 Technical data: Travel ranges: X 650 mm Gbjdpfszamngsx Aagen Y 600 mm Z 500 mm Spindle mount: HSK 63 Max. spindle speed: 2000 rpm Table size: 800 x 600 mm Number of tool positions: 30 Equipped with: Laser measurement system Measuring probe Operating mode: 3+4 axes ITC Intelligent Thermal Control Automatic central lubrication Mobile handwheel Tool air blow-off device Weight: 11 tons

Condition: used, Year of construction: 2007, number of spindle speeds 10.000 U/min NC rotary indexing table Ø 630 mm control HEIDENHAIN - iTNC 530 numbers of positions in the tool changer 32 Gbodpfxjzaf Huo Aagen tool taper SK 40 5-axis simultaneous machining center | HERMLE - C 30 U equipped with ITC (80 bar), NC swivel rotary table, tool changer & chip conveyor. The Z-axis motor was replaced in 2025, and the spindle was already replaced in 2015 at 7,100 operating hours. The machine is in a well-maintained condition and can be inspected under power at any time. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C30U | C-30U | C-30 U

Condition: excellent (used), Year of construction: 2007, Ultimax 4 control system Travel ranges X/Y/Z: 610 x 510 x 610 mm Table size: 760 x 510 mm Spindle speed: 12,000 rpm Tool magazine for 24 tools, SK 40 Godpfey U Rzuox Aagebn Chip removal system

Condition: new, functionality: fully functional, We offer you: CNC machining center, universal Manufacturer: DMG MORI Type: DMC 80 FD duoBlock Year of manufacture: NEW Control system: Celos with Heidenhain TNC 640 Technical data: Travel ranges: X-axis: 800 mm Y-axis: 1050 mm Z-axis: 850 mm Main spindle: Tool interface: HSK-A 100 Speed range: 12,000 rpm Drive power (100/40%): 52 / 42 kW Max. torque: 430 / 300 Nm Rotary table: Table diameter: 800 x 630 mm Max. table speed: 30 rpm (milling) / 800 rpm (turning) Tool changer: Number of tool positions: 123 Technical features & accessories: - Universal milling head with controlled B-axis - NC milling/turning table with pallet carrier - Rotating pallet changer, 2 pallets - Coolant tank 980 l - Oil and emulsion mist separator system - Chip conveyor - Rotating viewing window - Taper cleaning station with rotating brushes for HSK tool holders - Control panel for the tool magazine of the loading station with a 15-inch TFT screen - Internal coolant system (IKZ), frequency-controlled 10 bar – 80 bar / 31 l/min through the spindle center (AD) - Flushing gun for chip flushing - Cooling device with compressed air through the spindle center - Optical infrared probe Renishaw PP60 (OMP 60) - Tool measurement in the work area Blum Laser DIGILOG - Tool breakage monitoring, mechanical version - 3D quickSET - Sensor package i4.0, consisting of: MPC – Machine Protection Control, SGS spindle growth sensor, IKZ flow monitor - Condition Analyzer - proTIME - 4-color signal light - Operating mode 4 Godoy U Hlpspfx Aagobn - Accuracy package - Electronic handwheel - Energy meter for CELOS - Safety package for power failure - L-probe package 2 (Renishaw) / L-measurement Accessories, illustrated tools and clamping devices are only included in the scope of supply if this is stated in the additional information. Subject to change and errors in technical data and specifications, as well as prior sale!

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 600 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 460 mm, total height: 2,770 mm, table load: 500 kg, overall weight: 5,200 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 30, tool weight: 8,000 g, number of axes: 4, This 4-axis MORI SEIKI SV-400 was manufactured in 1998. It features a table size of 900 × 500 mm and impressive travels of 600 mm in the X-axis, 430 mm in the Y-axis, and 460 mm in the Z-axis. The machine includes a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 30 stations. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI SV-400 vertical machining centre we have for sale. Contact us for further details. Gbodpjy Uxigofx Aagjn • Table: 900 × 500 mm; 4 T-slots (18 mm width × 100 mm pitch) • Number of axes: 4 (X, Y, Z + 4th rotary axis; 4th axis supplied by accessory listed below) • Distance spindle nose to table: 150–610 mm • Spindle: max; 22 / 18.5 kW motor; 85 mm front bearing ID • Tool magazine: max tool Ø 80 mm (adjacent) / 125 mm (non-adjacent); max tool length 300 mm; chip-to-chip 3.2 s • Feedrates: Rapid X/Y/Z 32,000 mm/min; max working feed 16,000 mm/min • Axis motor power: X/Y 2.1 kW; Z 4.4 kW • CNC control: MORI-FANUC MSC-501 (compatible with MSC-518); memory 320 m; functions include helical interpolation and cutting force control (Power Monitor) • Coolant system: 50 bar high-pressure through-spindle coolant (TSC) • Features: air blow for part cleaning, full enclosure, end-of-cycle lamp, RS-232 interface • Floor space: 2,200 × 2,550 mm • Electrical: total installed power 50.2 kVA; 380 V, 50 Hz Additional equipment • 4th axis attachment: Tsudakoma RN-150R rotary table with 200 mm faceplate and tailstock • Chip management: 2× rear-discharge chip conveyors Technical Specification Taper Size BT 40

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Hermle C 250 V, Year of manufacture: 2025, Control system: Heidenhain 7, Gbsdpfx Aaoy Uwhusgsn Travel range X/Y/Z: 600/550/450 mm, Tool changer: 30-position, Tool holder: HSK 63, Spindle speed: up to 16,000 rpm, Fixed table, Table size: 800 x 616 mm, High-pressure coolant system: 40 bar, Paper band filter system, 3D measuring probe: Blum TC, Blum LG 53 WZ for measuring / breakage detection, Chip conveyor, Enclosure roof: manual.