Alex Kaufmann

Condition: new, Year of construction: 2025, functionality: fully functional, Place: Austria Nsdpfxjxy Nkpe Ah Djli Available immediately

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, functionality: fully functional, Manufacturer: ATM Recyclingsystems GmbH Type: ArnoBrik 7 Technical Specifications Main Dimensions Length x Width x Height: 3,500 x 2,200 x 2,800 mm Weight approx.: 5.5 t Briquette diameter depending on material: approx. 70 or 90 mm Briquette height depending on material: approx. 70 – 90 mm Performance Data Pressing force: 1,500 kN Cycle time for grinding sludge: approx. 80 sec. Cycle time for other materials: approx. 10 – 12 sec. Nsdpfx Ahsxy Hqgo Dsli Capacity per hour: - Aluminium: 200 – 250 kg/h - Steel, cast iron: 350 – 500 kg/h - Copper: 400 – 600 kg/h - Grinding sludge: 80 – 110 kg/h - Filter dust: 80 – 100 kg/h Briquette weight depending on material: 0.5 – 1.5 kg Briquette Density - Aluminium: 2.2 – 2.4 kg/dm³ - Steel, cast iron: 5 – 5.5 kg/dm³ - Grinding sludge: 3.0 kg/dm³ Hydraulic Equipment Number of power-regulated axial piston pumps: 1 unit Power requirement per pump set: 22 kW Operating pressure: 300 bar Hydraulic tank capacity: 250 l Electrical Equipment Main pump drive power: 22 kW Control voltage: 24 V DC Operating voltage: 3 x 400 V / 50 Hz

Condition: ready for operation (used), Year of construction: 2001, operating hours: 56,927 h, functionality: fully functional, Manufacturer: ATM Recyclingsystems GmbH Model: ArnoBrik 15 Year of manufacture: 2001 Briquette diameter: 150 mm Technical Data Njdpfx Ahsxy E H He Doli Briquette diameter: 140 or 150 mm Capacity: - Cast iron chips: 4.8 – 5.3 t/h - Steel chips: 4 – 5 t/h - Mixed briquetting: 4 – 5 t/h - Aluminium chips: 1.6 – 1.8 t/h Mixed briquetting: 4 – 4.5 t/h Tyre wire: 2.5 – 3 t/h Hourly throughput depending on material Briquette density for steel and cast iron: 5.5 kg/dm³ Operating pressure: 300 bar Required space (L x W x H): 13,500 x 6,500 x 2,000 mm Machine weight: 30 t Main cylinder force: 5,300 kN Oil requirement: 2,800 litres Main drive: 4 x 30 kW Connected load including ancillary equipment: approx. 150 kW Briquette height: 110 - 140 mm Briquette weight – depending on material: approx. 10 - 16 kg Cycle time: approx. 10 sec

Condition: ready for operation (used), Year of construction: 2014, operating hours: 7,822 h, functionality: fully functional, Manufacturer: ATM Type: ArnoBrik 10 Year of manufacture: 2014 Briquette diameter: 105 mm Technical Data Main Dimensions Length x Width x Height: 4,250 x 3,600 x 2,200 mm Weight approx.: 10 t Nodpfx Asxy E Evoh Djli Briquette diameter: 105 mm Briquette height depending on material: approx. 60 - 120 mm Performance Data Cycle time: 10 sec. Hourly capacity: - Aluminium: 850 - 1,060 kg/h - Steel, cast: 1,800 – 2,000 kg/h - Nickel: 1,800 – 2,000 kg/h Briquette weight (aluminium): 2.0 – 2.5 kg Briquette density (steel, cast): 5.5 kg/dm³ Briquette density (aluminium): 2.2 – 2.5 kg/dm³ Hydraulic System Number of power-regulated axial piston pumps: 2 units Power requirement per pump unit: 30 kW Operating pressure: 300 bar Hydraulic tank volume: 1,300 l Electrical Equipment Drive power: 70 kW Control voltage: 24 V DC Operating voltage: 3 x 400 V / 50 Hz

Condition: used, Year of construction: 2013, functionality: fully functional, total width: 860 mm, total height: 1,800 mm, total length: 3,100 mm, briquette diameter: 65 mm, overall weight: 3,800 kg, We are selling our used briquetting press from the manufacturer Mütek, as shown in the photos. Model: MAP 750 Year of manufacture: 2013 Diameter: 65 mm Main motor power: 37 kW Feed auger gear motor: 2.2 kW Compactor auger: 5.5 kW Hydraulic pump motor: 0.37 kW Total connected load: approx. 47 kW Siemens PLC S7/300 controller with operating hours counter in the control cabinet Machine has CE marking Automatic start-stop function Dimensions: 3100 x 860 x 1800 mm (LxWxH) Weight: 3,800 kg Included accessories: - Storage silo above the machine (6 m³) - Briquette channel extension without gate (2 m with stand) - Temperature control unit - Cutting device (trims briquettes to equal length) - Cyclone for material injection, incl. frame - Rotary valve The machine is still installed and operational, so a functional test on site is of course possible. Net price: €90,000. Gross: €107,100. VAT can be stated separately. Nljdpfx Ajxxyy Esh Dsi

Condition: used, Year of construction: 2012, total width: 1,380 mm, total height: 1,710 mm, total length: 2,100 mm, This is a set, consisting of a briquette press with extraction Exhaust capacity 5.800 m³/h Nljdpoxr Dz Tofx Ah Doi - Year: 2012 - Documentation available: No - Transport dimensions: 2100mm x 1380mm x 1710mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2010, total width: 2,080 mm, total height: 1,900 mm, total length: 2,440 mm, Briquette press; Höcker Polytechnik BrikStar C 3-19-L 4.3kW, 400V 25kg/h Funnel volume 3m³ Nsdpfx Ahoxqdxcj Djli Oil tank 50l Dimensions; 2015x2360x1300mm, 830kg - Year: 2010 - Documentation available: Yes - Transport dimensions: 2440mm x 2080mm x 1900mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2019, total width: 890 mm, total height: 1,100 mm, total length: 1,860 mm, Empty weight: 390 kg - Year: 2019 - Documentation available: No - Serial number: 355 - Transport dimensions: 1860mm x 890mm x 1100mm (l x w x h) - Transport weight [kg]: 390kg - Transport packages [pcs.]: 1 Nlodpfoxixbvjx Ah Dji Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2022, total width: 950 mm, total height: 1,250 mm, total length: 1,800 mm, Empty weight: 390 kg - Year: 2022 - Documentation available: No - CE marking present: Yes - Serial number: 546 - Transport dimensions: 1800mm x 950mm x 1250mm (l x w x h) - Transport weight [kg]: 390kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Nodpjxd Rfijfx Ah Djli Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2006, functionality: fully functional, Complete briquetting line 2 x RUF 330. Boiler room, drum dryer, conveyors. Njdpfx Ahsxazhtj Doli

Condition: used, Year of construction: 2017, total width: 2,450 mm, total height: 1,100 mm, total length: 1,900 mm, Empty weight: 800 kg Price: On request - Year: 2017 - Documentation available: No - CE marking present: Yes - Serial number: 5037411-000150 - Transport dimensions: 1900mm x 2450mm x 1100mm (l x w x h) - Transport weight [kg]: 800kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels Nledoxan Utopfx Ah Dei

Condition: like new (used), The MSP 120 ZK is ideally suited for crushing and subsequent briquetting of various types of metal chips. The MSP 120 ZK briquetting press with integrated shredder is composed of a hydraulic chip press paired with an upstream shredder, both perfectly matched to each other. This system enables the crushing and compaction of chips generated during turning and milling operations. The volume is significantly reduced, and the briquettes are separated from the coolant lubricants (emulsion, oil) absorbed during earlier machining processes. The system consists of a feed hopper for loading the material to be processed and a shredder inside the hopper, which reduces chip length. A conveyor system moves the shredded chips continuously and stepwise via a conveyor belt into the chip press hopper. There, two augers feed the material into the compaction chamber. The system is equipped with a monitored liquid collection tank and pump, allowing coolants to be returned to the production process. Cycle control is managed by a PLC and an electronic level sensor for the monitoring of the hopper fill level. Optionally, a tipping device can be added for manual loading of the unit. Briquetting Press: Throughput (Aluminum): 15–20 kg/h Throughput (Steel, Copper): 45–60 kg/h Briquette diameter: 60 mm Productivity: 120–180 pcs/h Specific pressure on briquette: 1,050 kg/cm³ Motor pump power: 7 kW Total installed power: 10 kW Voltage: 400V / 50 Hz Oil tank: 80 l Dimensions: 1,400 x 1,200 x 1,050 mm Weight: 800 kg Shredder: Number of knife shafts: 1 pc Motor power: 5.5 kW Nlodpfx Ajw R Ranjh Doi Number of knives: 16 pcs Exchangeable knives: Yes Knife size: 25 mm Knife material: Hardened steel Shaft length: 400 mm Screen mesh size: 20 mm Hopper inner diameter: 1,000 mm Hopper volume: 1 m³ Weight: 280 kg Power supply: 380V Overall system dimensions: 2,820 x 1,862 x 2,065 mm Colour: Textured paint, RAL 7035 light grey

Condition: as good as new (ex-display), Year of construction: 2022, Briquetting press for aluminium or steel chips Extremely high pressing force of 3,700 kg/cm² Large storage silo Briquette size: 60 x 40 mm Throughput: Aluminium chips – up to approx. 70 kg/h Steel chips – up to approx. 100 kg/h Brass chips – up to approx. 100 kg/h *depending on feedstock Included: - Emulsion tray - Emulsion pump Nljdpfx Asw Ig Suoh Dsi - Oil cooler

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, briquette diameter: 80 mm, overall weight: 7,650 kg, Manufacturer: AYMAS Model: BP 80T Year of manufacture: 2016 Weight: 7,650 kg Power: 30 kW Briquette diameter: 80 mm Nledpfjw Awn Rsx Ah Dei The BP series briquetting presses for steel and metal chips are machines designed for the production of briquettes from metals. Standard versions allow processing of materials such as aluminum chips, fine iron turnings from machining, or copper chips. The briquetting models for steel are specifically engineered to handle difficult materials, such as shredded steel cord from tire recycling. The special design enables continuous production and ensures high density and robustness of the briquettes.

Condition: good (used), Technical specifications: Briquetting press in good condition Year of manufacture: 2007 Technically inspected in 06 / 2025 Cylindrical briquette: 80 mm Throughput up to max. 150 kg/h *only approx. 3,949 operating hours - Hydraulic press: briquetting press with discharge chute - Hydraulic unit: 4 kW - Pressure: max. 300 bar - Transport dimensions: 1585/2140/H1940 mm - Weight: 1,370 kg Nlodpfx Ahjwtdk Te Dsi Functional guarantee upon handover We are happy to arrange a free test run!

Condition: used, Year of construction: 1998, Briquette press Weima TH 400 Year of construction 1998 Briquette diameter 50mm Capacity 60-80kg/h Machine no. 950-756 Main motor 7.5kW 200 Bar, 400V Including large collection container Machine is currently not working, the hydraulic block is leaking. Nedpfjwh I Urex Ah Djli - Year: 1998 - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2025, Briquetting press with PLC and automatic briquette length control Throughput: up to 60 kg/h Briquette: 50 mm cylindrical Motor: 5.5 kW Dimensions: 1,900 x 1,350 x 1,410 mm Weight: approx. 860 kg Nledpfx Ajv Rpxlsh Dji Requirements: Feed material ideally less than 25 mm chip length Moisture content 6-12% dry matter Machine suitable for discontinuous operation. For example, briquette for up to 2 hours; 1 hour break, etc. If the machine is to produce continuously for longer than 2 hours, an optional cooling system must be connected.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1800x1800x1900 mm Nsdpfx Aovz Ex Nsh Djli Weight 3000 kg Total power requirement 33,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1850x1500x1230 mm Weight 870 kg Total power requirement 8 kw Njdpsvz Eqlsfx Ah Deli

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1700x1170x1510 mm Weight 650 kg Nljdpfx Ahovz Eqfs Dji Total power requirement 6 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2000x1600x1500 mm Weight 1550 kg Njdpfxovz Efvj Ah Doli Total power requirement 11,5 kw

Condition: new, Year of construction: 2024, Sheet Metal Stamping Punching Embossing Perforating Tool Die Njdpfx Ajt Tfv Uoh Dsli

Condition: used, Year of construction: 2020, operating hours: 5,200 h, functionality: fully functional, machine/vehicle number: 3096, Model/ Type: RUF 15/1700/150x60 Ma.Nr. / Ma.No.: 3096 Year of construction: 2020 Drive motor: 15 kW Throughput capacity up to max.: 500 kg/h (depending on material) Press pressure: 1700 kg/cm² Briquette format: 150x60mm Operating hours / Running hours: approx. 5,200 h approx. 5,200 h Warranty: 12 months after delivery 12 months after delivery Verfügbarkeit/ Availability: approx. 4 - 8 weeks after receipt of down payment approx. 4 - 8 weeks after receipt of down payment Details: + Siemens TP 700, Siemens S7-1200 Nodpfx Ahet Sgtfe Dsli + 600 x 1.000mm Hopper + Elektrische Emulsionspumpe / Electrical emulsion pump + Spraying device / Spraying device

Condition: used, Year of construction: 2023, operating hours: 41 h, functionality: fully functional, machine/vehicle number: 3617, Model/ Type: RUF 15/4000/70 Njdpfx Ahot Sgrze Deli Ma.Nr. / Ma.No.: 3617 Year of construction: 2023 Drive motor: 15 kW Throughput capacity up to max.: 450 kg/h (depending on material) Press pressure: approx. 4000 kg/cm² Briquette size: 70mm Operating hours / Running hours: approx. 41 h approx. 41 h Warranty: 12 months after delivery 12 months after delivery Verfügbarkeit/ Availability: approx. 8 weeks after receipt of down payment approx. 8 weeks after receipt of down payment Details: + Siemens TP 700, Siemens S7-1200 + Hopper extension with grid / Hopper extension with grid + Elektrische Emulsionspumpe / Electrical emulsion pump + Sprüheinrichtung / Spraying device + Inspection door in hopper / Inspection door in hopper

Condition: used, Year of construction: 2017, operating hours: 381 h, functionality: fully functional, machine/vehicle number: 2575, Model/ Type: RUF 18,5/5000/80 Ma.No. / Ma.No.: 2575 Year of construction: 2017 Drive motor: 18.5 kW Throughput capacity up to max.: 550 kg/h (depending on material) Press pressure: approx. 5000 kg/cm² Briquette size: 80mm Operating hours / running hours: approx. 381 hrs. approx. 381 h Nledpfxot Sfxmo Ah Dsi Warranty: 12 months after delivery 12 months after delivery Verfügbarkeit/ Availability: approx. 8 weeks after receipt of down payment approx. 8 weeks after receipt of down payment Details: + Siemens TP 700, Siemens S7-1200 + 600 x 1.000mm Hopper + Elektrische Emulsionspumpe / Electrical emulsion pump + Spraying device + Extractable screw / Extractable screw Speed-controlled pump + Speed-controlled pump