Zimmerei Dietrich

Condition: used, Year of construction: 2013, 1 swivel spindle moulder, manufacturer Format, model Profil 45/07, serial no. 61.07.092.13, year 2013, sliding table approx. 2 m, fence, with digital readout, Haffner 4-roll feed, internal no. I440050 Nsdoxzn Ebepfx Ah Deli

Condition: used, Year of construction: 2012, 1 edge sanding machine, manufacturer Felder, model FS 900, serial no. FS01.07.12, year of manufacture 2012, 4-roller feed unit type F 48, internal no. I440047 Nledpfxoxzn Ays Ah Doi

Condition: excellent (used), Felder F 700 M Shaper (Spindle Moulder) Electric spindle height adjustment and manual angle adjustment from 0 to +45 degrees Interchangeable 30 mm spindle Long tables: 215 cm 4 spindle speeds Njdpfx Ahoxyfrpo Deli 5.5 kW motor Spindle lock Brake Very good condition, machine fully checked and ready for operation.

Condition: new, Table dimensions 1.200 x 780 mm Motor output 7,5 kW Nedpfxexyafqj Ah Djli Spindle diameter 30 mm

Condition: good (used), Year of construction: 1997, functionality: fully functional, table length: 1,300 mm, table width: 310 mm, Types: KF-7, machine no.: 79-03/170-97, year of manufacture: 1997, lower spindle and circular saw blade 45°C, feed unit Magg type: 13720501, power supply: 3/400V 750Hz/5.3 Amp Njdpfxjxxacgo Ah Dsli

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, 4 spindle speeds: 3000/4500/6000/9000 rpm. Right-/left-hand rotation. Control panel on top. Table extensions and pull-out table support. Motor 4.7/5.7 kW. Spindle diameter 30 mm. Weight approx. 1000 kg. Nsdpjxwxrqofx Ah Deli

Condition: used, Table dimensions 2500x 780 mm Nledjxpi D Ispfx Ah Dji Motor output 7,5 kW Spindle diameter nach Bedarf mm reus 1.500 - 10.000 U/min

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 80-12/020-01, milling spindle length: 30 mm, table length: 3,000 mm, table width: 380 mm, Equipment: motor brake, Types: KF 700 S Pro, Machine No.: 8012/020-01. Year of manufacture: 2001, Power supply: 3/400V/50Hz/10.1 A, Motor: 5.5 kW, Spindle: 30 mm, Pre-milling unit with feed field guide, Table: 3000x380 mm Nljdpfxjxmhkho Ah Dsi

Condition: good (used), Year of construction: 1989, functionality: fully functional, height adjustment type: mechanical, table length: 2,350 mm, spindle speed (max.): 9,000 rpm, overall weight: 850 kg, space requirement width: 1,200 mm, space requirement length: 2,400 mm, space requirement height: 1,620 mm, input voltage: 380 V, rotational speed (max.): 9,000 rpm, input frequency: 50 Hz, Equipment: motor brake, Spindle moulder with tilting spindle arbor -5/+45 degrees Milling fence with digital adjustment Speeds: 3000/4500/6000/9000 4-roller power feed Nsdpfx Ahoxl Sd Nj Doli

Condition: excellent (used), Panhans 240A spindle moulder (bottom spindle) Spindle diameter: 30 mm Spindle length: 130 mm Variable spindle speed: 3000/4500/6000/9000 rpm Electronic spindle height adjustment Nodpfexg Iz Hox Ah Dsli Electronic fence adjustment Electronic angle adjustment SCM 4-roller power feed

Condition: reconditioned (used), Year of construction: 2010, functionality: fully functional, Motor 7.35 kW 5 spindle speeds 3500-10000 rpm Milling spindle tilting 0-45° Sliding table length 1300 mm Nodpfexbq Uljx Ah Djli Electric height and tilt adjustment Electrically adjustable milling fence Milling fence completely foldable Max. tool diameter 250 mm Fence jaws aluminium 550 mm Centrex milling guard Weight approx. 700 kg

Condition: excellent (used), Year of construction: 2020, CASADEI F 25 LL FK - Spindle moulder with tilting spindle and table extensions With Aigner integral fence and 3-roller power feed - Machine in as-new condition - Spindle moulder with tilting spindle from -45° to +45° Robust steel and cast iron construction Dynamically balanced spindle assembly mounted on the table Especially sturdy design Smooth operation thanks to precision components and high dead weight Standard right/left spindle rotation with electronic lockout when changing direction 5 speeds from 3000 to 10,000 rpm Speed change is simple and convenient from the machine side Standard with MK 4 quick-change spindle system Large cast iron table for lasting precision Easy operation thanks to controls and speed display on the front of the machine Standard fence with fine adjustment and aluminium fence jaws Powerful industrial motors Equipment details: Moulder fence Moulder fence adjustment with crank/wheel from the front With digital readout Quick-change spindle MK 4 quick-change spindle standard on all CASADEI F 23 and F 25 models Optional sliding table Optional sliding table for small tenoning operations and slotting work Scope of delivery: Manually tiltable spindle from +45° to -45° Speed indication via LED on the front Aluminium fence jaws Curved cutter guard Right/left rotation of the spindle MK 4 quick-change spindle Moulder fence with crank/wheel adjustment from the front with digital readout Table extension left and right (2500 mm length) Pull-out workpiece support (2500 mm length) Model CASADEI F 25 LL FK Item no. 5220728 Technical Data Working table dimensions: 2500 x 810 mm Spindle tilting range: +45 to -45 degrees Usable spindle length for Ø 30-35 mm: 140 mm Usable spindle length for Ø 40-50 mm: 180 mm Spindle stroke: 90 mm Max. profiling tool diameter: 250 mm Max. tenoning tool diameter: 350 mm Max. form cutter diameter: 160 mm Max. retractable tool diameter: 320 x 60 mm Speeds, 5 steps: 3000/4500/6000/8000/10000 rpm Motor power: 400 V / 50 Hz / S6-40% 7 kW Weight: 480 kg Extraction port diameter at fence: 1 x 120 mm Extraction port diameter under table: 2 x 80 mm Location: Ex stock 54634 Bitburg Nljdpfxjxac Eye Ah Doi - Immediately available -

Condition: ready for operation (used), Year of construction: 1993, Kölle F45 Tilting Spindle Moulder Tiltable up to 45° Table size: 1200 x 1000 mm Table extensions to the right and left, including pull-out frame support Nlodpfx Aew Ulileh Dei Motor power Right and left-hand rotation Pole-switchable spindle speeds: 3000/6000, 4000/8000, 5000/10000 rpm Aigner integral fence Electric spindle tilt with digital display Electric spindle height adjustment with digital display Spindle arbor diameter: 30 mm Maggi 3-roller power feed unit Year of manufacture: 1993 Unfortunately, the machine has been repainted by a dealer.

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, The milling machine runs properly and is ready for immediate use! Nedpfx Aew R N E Njh Doli

Condition: like new (used), For sale is a used Felder spindle moulder F-900 Z with mortising and slotting table length of 1300 mm. The machine is used as a demonstration unit in our showroom and is therefore in like-new condition. Technical data: - 5 spindle speeds - Spindle tiltable 90° - 45° - Fence for tooling up to Ø 230 mm - Multi-adjustment system - Mortising and slotting table 1300 mm - Electrically height-adjustable and tiltable with "PowerDrive" - Motor power 7.3 kW / 9.9 HP SD-Start - Year of manufacture: 2022 Nedow Hfd Ijpfx Ah Dsli The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Info Tel. 06244-20299. Related terms: spindle moulder, milling machine, moulding Reference: R-A0117

Condition: used, used Manufacturer: Schneider Model: SK 1/2 Machine number: 10144 GS-tested Motor: 5.5 kW Tiltable from -5° to +45° Motor brake Motor with 2 speeds / pole-changeable 6 speed settings: 4000/5000/6000/8000/10000/12000 rpm Right and left rotation Table size: 1150 mm x 850 mm Spindle diameter: 30 mm Spindle fence with fine adjustment Control panel Extraction port D 100 / 120 mm Required space approx. 1600 mm x 1200 mm x 1500 mm Weight approx. 1000 kg Total connected load 5.5 kW Nsdpow Dgbisfx Ah Doli Storage location: 97447 Gerolzhofen, free loaded, unpacked Handover in as-inspected condition No guarantee or warranty

Condition: as good as new (ex-display), functionality: fully functional, power: 7.35 kW (9.99 HP), spindle diameter: 30 mm, pivoting range: 46 °, input voltage: 400 V, rotational speed (min.): 1,000 rpm, rotational speed (max.): 18,000 rpm, input frequency: 50 Hz, The new profil 92 M e-motion spindle moulder is Format4’s premium model, offering maximum operating comfort and ensuring absolute efficiency through minimal setup times during milling operations. The advanced electric spindle features an HSK 63F interface for a tool quick-change system with pneumatic clamping. The swiveling range of ±46° enables limitless machining versatility. With the self-explanatory e-motion control via a 15-inch touchscreen panel, spindle speed, spindle height and angle, as well as the fence position and even the table opening, can be set intuitively and precisely. Integrated memory for tools, spindle settings, and milling programs ensures perfect repeat accuracy and the shortest setup times. Electrically controlled, eccentric inserts provide maximum table support area and significantly reduce adjustment work, especially when swiveling the spindle. The newly developed heavy-duty precision milling fence features two powered axes for precise depth adjustment of the complete fence, plus an independent, adjustable depth stop for the right-hand feeding jaw. For convenient access during curve milling, the fence can be swung completely out of the working area. Optionally, the Format4 profil 92 M e-motion can be equipped with an electrically height-adjustable power feeder. Further technical data: - Maximum tool diameter: 250 mm - Usable spindle height: 140 mm - Height adjustment: electric Nlsdpfx Ahewztr No Dji Optional equipment: 12 Potential-free contact 106 HSK 63F spindle, Ø 30 mm, 140 mm 118 Integral safety rulers, 650 mm 119 Table opening 255 mm with controlled eccentric inserts 183 Table extension on both sides 670 mm with 2200 mm sliding frame 213 Electrically height-adjustable feeder support, incl. horizontal tube 220 Parts list holder with A9 clipboard Advantages: - Highly efficient electric spindle with stepless speed adjustment and HSK 63F interface - Position control for milling height and angle ±46º - Position control for milling fence including offset function - Smartouch with intuitive e-motion control system - Table opening with controlled eccentric inserts (optional) - Electrically adjustable height for the feeder on overhead column (optional) Further information: - The electric spindle features a HSK F63 tool quick-change system - Clamping range: 2–25 mm with OZ25 collets - "Integral" safety rulers: 650 mm - Table extension on both sides 670 mm with 2200 mm sliding frame - Table opening 255 mm with controlled, eccentric inserts

Condition: excellent (used), Year of construction: 2022, Tilting spindle moulder with sliding table FELDER Model F 700 Z Sliding table length: 1000 mm Nedpfx Ahswu D A Eo Doli Motor power: 5.5 kW Motor voltage: 3 x 400 V, 50 Hz Spindle tilting range: 90 - 45 degrees Spindle diameter: 30 mm Spindle speed: 3500/6500/8000/10000 rpm Table opening: 230 mm Extraction port diameter: 120/80 mm CE Note for used machines: • Errors in technical specifications and prior sale excepted. • Listed prices are ex-location – free loading! • Machines have been cleaned and function-tested. • All machines are sold as inspected, without any warranty. Buyers are welcome to inspect the machines at the location. • Special agreements only valid in written form. (We only respond to inquiries including your address and telephone number!)

Condition: used, Year of construction: 1993, Milling machine, Manufacturer: GEA Year of manufacture: 1993 Tiltable Nsdpfxjwufn Aj Ah Dsli Motor 7 kW Spindle 30 mm with Wegoma 3-roller feed Stepless 3–24 rpm 6 speeds up to 10,000 rpm

Condition: excellent (used), Year of construction: 2007, Tilting spindle moulder Utis CSN Digital & stand for feed unit, feed unit by Maggi Italy Nsdpfxjwudlyj Ah Djli Year of manufacture 2007

Condition: like new (used), SCM bottom spindle moulder Sliding carriage in the table 120 cm Height and tilt electrically adjustable Spindle fi30 7 kW motor 4 spindle speeds Very good condition Nedpewt A Iqjfx Ah Doli

Condition: good (used), Year of construction: 1988, functionality: fully functional, Tilting Spindle Moulder SAC TS 145 Manufacturer: SAC (Süeri Alfredo SpA) Year of manufacture: 1988 S/N: 8831 Robust spindle moulder with electrically adjustable height and tilt, powerful motor (7.5 kW), Nodpowt A Dxofx Ah Dsli multiple speeds, and extensive equipment. Technical specifications: Spindle diameter: 30 mm Spindle stroke (height): approx. 150 mm Tilting range: −5° to +45° Height adjustment: electric, with digital display Tilting adjustment: electric, with digital display Fence adjustment: manual, with scale indicator Spindle speeds: multi-stage – 3,000; 4,500; 6,000; 8,000; 10,000 rpm Motor power: 7.5 kW Motor brake: automatic Extraction ports: 2 × 120 mm Ø (other options also 100–110 mm) Single-sided table extensions right side: roller/tenoning table/extra accessories with workpiece clamp and end stop ruler, angle adjustable Dimensions & weight Table size: approx. 1,200 × 820 mm Overall dimensions approx.: 2,200–2,400 mm (L) × 1,100–1,400 mm (W) × approx. 1,500 mm (H) Weight: approx. 1,100 kg

Condition: excellent (used), Year of construction: 1989, operating hours: 5,400 h, functionality: fully functional, For sale: A profiling machine with tiltable spindle Nlodpfx Ahjwttqio Doi Manufacturer: Panhans Model: 240 Serial number: 150 Year of manufacture: 1989 Weight: approx. 900 kg Operating hours: 5,400 Dimensions: Overall length: 2,550 mm Overall width: 1,350 mm Overall height: 1,700 mm Motor: 7.5 kW Working height: 875 mm Profile spindle: Ø 30 mm (standard) Speeds: 3,000 / 4,500 / 6,000 / 9,000 rpm Spindle tilt electric: –5° to +45° Spindle height adjustable via electric control Feed: 3-roller feed (manufacturer: Holzher)

Condition: as good as new (ex-display), functionality: fully functional, milling spindle length: 125 mm, height adjustment type: electric, table length: 2,500 mm, power: 7 kW (9.52 HP), tool diameter: 240 mm, spindle diameter: 30 mm, pivoting range: 45 °, spindle speed (max.): 10,000 rpm, spindle speed (min.): 3,500 rpm, Including the following special accessories: Motorized height and angle adjustment of the work unit with digital displays Milling fence with crank adjustment, milling fence steplessly adjustable via easily accessible cranks from the front: Adjustment of the entire fence relative to the tool - Adjustment of the front ruler to change cut depth - Mechanical digital displays Nledpfx Ahowrhvks Dji - Wood fence jaws and connecting bridges Aluminum fence jaws instead of the wooden ones LL version for profiling work with two cast iron table extensions complete with: - Table extensions left and right with a total length of 2,500 mm - Extendable workpiece support - Emergency stop button

Condition: used, Year of construction: 1998, machine/vehicle number: AB/118120, SECOND-HAND TILTING SPINDLE MOULDER SCM MOD. T110 I - CE RULES - Volt. 400/50 - S/N AB/118120 - Year 1998 Nlsdewrfhkepfx Ah Dji