Heppt Design in Holz GmbH & Co. KG

Condition: used, Year of construction: 2014, Used machine Year of manufacture: 2014 Equipment and technical data: Working area X = 1300 mm Working area Z = 80 mm Number of separate units: 2 CNC axes: 2 Ljdpfxey E Awvj Akyjhf Vertical drills: 3 Horizontal drills Y: 3 Motor: 1.5 kW With dowel insertion via vibratory feeder With glue system Dowel diameter: 8 mm Dowel length: 35 mm 4-position field occupancy Alternating feed With pneumatic clamps Control: Beckhoff Availability: by arrangement Location: 63934 Röllbach

Condition: new, Year of construction: 2026, Pitch 32 mm Working width 896 mm Boring depth max. 65 mm Motor output 2x1,5 kW Overall size 1122x1040x1250 mm Lhedpfxsy Ehz Hj Akyjf Weight 380 kg Number of boring spindles 29 St.

Condition: new, Year of construction: 2026, Pitch 32 mm Working width 704 mm Boring depth max. 70 mm Motor output 1,5 kW Weight 310 kg Number of boring spindles 23 St. Lhodpfx Ajy Ehzgokysf

Condition: new, Year of construction: 2026, Pitch 32 mm Lhodpfx Akey Ehyvsysf Working width 1088 mm Boring depth max. 85 mm Motor output 2x1,5 kW Overall size 1320x1040x1250 mm

Condition: good (used), Code: 0359 Brand: MASTERWOOD Model: TEKNOMAT 2000-P - CE Standard Electronic anuba inserting machine with 2 controlled axis for inserting anuba hinges – CE Standard Technical specifications: Lhodjy Eg T Uopfx Akyef Working stroke length 3100 mm – Displacement speed 72 mt/min Working stroke height 350 mm – Displacement speed 15 mt/min Working stroke depth 150 mm - Displacement speed 15 mt/min Working table mm 150 x 3800 N° 2 rear stops with manual positioning N° 4 rear bracket-type clamps with reference stops Side stops with manual positioning 1 right - 1 left 2 pneumatic front clamps Anuba unit with double magazine for male female anuba hinges - Diameter 14 mm Tilting head - 7 + 90° Double stem anuba screw device Front fences on machine table for machining of assembled doors and windows Control CNC 2: Microprocessor control unit – Digital display – Multitasking operating system – Programming of manual and automatic anuba inserting – Inserting of single, anuba – Step by step execution Installed electrical power 7,62 Kw Compressed air 6-7 atm Machine Overall dimensions m 4400 x 1600 x 1600 h Weight kg 1650 Electrical cabinet overall dimensions mm 1050 x 550 x 1100 h Weight kg 390

Condition: used, Year of construction: 1996, Drilling head with 21 spindles, 32 mm pitch Working width: 640 mm Portal clearance: approx. 750 mm Drilling stroke: 100 mm Drilling unit position adjustment: 0–45 mm Hole row position adjustment: 0–300 mm Spindle speed: 2800 rpm Shank diameter of drill bit: 10 mm Maximum clamping height of workpieces: 100 mm Motor: 1.5 kW Working height: 850 mm Compressed air connection: 6 bar Weight: approx. 400 kg Storage location: Supplier Lhsdpfxey Dd I Ho Akyof

Condition: like new (used), Year of construction: 2025, type of input current: three-phase, input voltage: 400 V, number of spindles: 21, input frequency: 50 Hz, We are offering this as-new FELDER FD 21 professional FD21 Dowel Boring Machine FD 21, year of manufacture 2025. FD 21 professional dowel hole boring machine with 21 spindles. Includes: - 2 hold-down clamps - 2 stops, each 1.5 m, for line boring - 2 lateral stops - Tool holding spindle with bayonet lock FD 921, including drill bits - Reading optics and 5 quick-action chucks Lhsdsy Ddfxspfx Akysf - Electrical: 3x400V 50Hz, CE configuration - Mitre fence for FD 21 for drilling frames at 45° and 90° mitre angles - Coupling system for table extension on the milling machine - Lateral stops (2 pcs.) with digital display - Coupling rails (430-151) required Extensive accessories included If you have any questions or need further information, please feel free to message us or call.

Condition: excellent (used), Year of construction: 1988, Scheer dowel drilling machine DB 12 used 3 spindles 32 mm drilling center distance Motor 1.1 kW Lodpey Ahuhofx Akyshf Max. drilling depth 70 mm Location: ex stock 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 1980, Dowel drilling machine for frame production Lhodjyy I Snspfx Akysf

Condition: used, Year of construction: 2014, complete in standard configuration with: - Fully automatic electronic control with foot pedal for clamping-drilling-unclamping, electric jog operation, - Automatic return of the drilling unit after reaching the preset drilling depth - Automatic extension of drilling depth when end-grain drilling saves the need to adjust drilling depth from flat to end-grain drilling. (+10 mm, e.g. with dowel length 35 mm, drilling depth flat side 14 mm, drilling depth end-grain 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drill feed 0-70 mm) incl. 21 quick-change chucks (Ganner system) for easy bit changes. - Simple swiveling of the drilling unit from 0° to 90°, supported by gas cylinder. - 1 clamping beam, movable in Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. - Ideal stop system consisting of: - 1 stop fence 1800 mm for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops, with quick-change system, easily swappable from right to left for mirror-image shelf drilling in carcass constructions, also suitable for line boring in System 32. - Side stops and position settings, as well as drilling height position via support table using mechanical digital counters. - Side stops can be easily swiveled away, for the quickest changeover from carcass to frame and line boring. - Clamping arms for clamping beam designed for line boring positions up to max. 300 mm. - Ideal three-stage... Weight: approx. 400 kg gross, approx. 350 kg net. Dimensions (L x W x H): 1.35 m x 1.25 m x 1.40 m Equipment: 1 extraction hood, dust tested, ø 120 mm. 1 set for line boring in System 32 complete with: 1 base fence 1050 mm (aluminum profile 40x40 mm), 1 setting gauge for line boring. 1 frame dowel device complete with: 1 center stop, 1 round stop rod 850 mm long, 2 stops. Location: Nattheim. Ljdsyyxkhepfx Akyshf

Condition: excellent (used), Tabit machining center drilling dowel insertion Lodpeyx Tmhsfx Akyjhf milling

Condition: used, Year of construction: 1985, Used machine Year of manufacture: 1985 Universal dowel drilling machine with swiveling drilling unit with fully automatic control with 2 safety pneumatic clamps Drill motor 2.2 kW with 21 spindles Spindle pitch: 32 mm with attached oil damper Height adjustment: 80 mm Drilling depth: 80 mm Weight: 420 kg Availability: short notice Location: Röllbach Lodpfoyvl Hzsx Akyshf

Condition: used, Year of construction: 1984, Dowel boring machine Year of manufacture: 1984 Suitable for: Row drilling Cabinets Fittings Frames Standard swiveling device Max. passage: 820 mm Working width: 704 mm 23 drilling spindles; 32 mm spacing; drill attachment with M 10 thread, left and right Max. drill diameter: 40 mm Drilling depth horizontal: 120 mm Vertical: 80 mm Max. clamping height: 92 mm Lhedpfx Asyulftokyjf Motor power: 2.2 kW Air consumption at 6 bar approx. 6 l per cycle Weight approx. 340 kg Availability: short-term Location: Flörsheim

Condition: excellent (used), DB5 dowel hole drilling machine & row drilling machine - 21 drilling spindles - 32mm spindle pitch - 380 volts - 2.2 kW - Dimensions: length 1400mm x depth 900mm x height 1300mm Lodpfx Akoytvarsyshf - 2 pcs longitudinal stops

Condition: repair required (used), Year of construction: 1998, functionality: limited functionality, 2 drilling spindles, individually selectable 1 glue gun (note: glue pump missing) Dowel insertion tool for 8 x 40 mm dowels Lodpfsytq R Eox Akyehf The following issues were identified during testing: - Glue specification missing - Center stop rule missing - On the left working field, the front stops do not engage; instead, they lower when drilling on the right field - SPS module Beckhoff repeatedly fails. Machine must then be restarted. - Rubber pads under the hold-downs are missing. When inserting the dowels, the parts deform because the surface is too smooth

Condition: used, Used machine Equipment and technical data: - Universal dowel drilling machine for horizontal and vertical drilling - Working width 720 mm Lhedpfx Asyq T Iuskyof - With drilling beam, drive motor 3 HP, 2800 rpm - 23 drilling spindles, drilling pitch 32 mm - Pneumatic workpiece clamping via foot pedal - 2 stop rails 1000 mm - with undercarriage Availability: short-term Storage location: 63934 Röllbach

Condition: used, Year of construction: 2016, working length 20-1250 mm working width 50-800 mm Lhjdpfx Asym Rqrokyef working thickness 10-60 mm cnc controlled in X / Y / Z 3 spindle drilling head machine without the gluing pump

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, The HOMAG WEEKE OPTIMAT ABD 150 is a high-performance CNC machine designed for precise drilling, dowel insertion, and hardware fitting in furniture production and panel processing. This machine is ideal for cabinet makers, furniture manufacturers, and industrial woodworking operations requiring accurate and efficient automated processing. The machine features: CNC-controlled drilling and inserting unit Integrated glue and dowel insertion system Robust industrial construction Compact footprint Easy-to-use control panel CE certified The machine has been regularly maintained and is ready for operation. Lodpfxjym Nvts Akyjhf

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 432.08.202.22, drilling depth: 70 mm, input voltage: 400 V, pressure: 8 bar, input frequency: 50 Hz, power: 1.5 kW (2.04 HP), The FD 921 is equipped with 21 drilling spindles set at a 32 mm pitch. Drill bits up to a diameter of 35 mm can be used for drilling dowel holes, line bore holes, and cup hinges. The large cast iron table, side stops, pneumatic workpiece clamps, and ergonomic controls make the FD 921 a premium dowel boring machine. Further technical data: Number of drill heads: 21 (11 right-hand, 10 left-hand rotation) Axis distance between drill heads: 32 mm Max. workpiece size: 850x3000 mm Max. workpiece height: 65 mm Required air pressure: 6-8 bar Lhjdpfoyf A N Djx Akyef Accessories: - 11 tool holders with 5 mm right-hand dowel drill bits - 10 tool holders with 5 mm left-hand dowel drill bits - Positioning system for side stop with 8 stops - Additional pneumatic clamps - Mitre stop for FD 21 - Bracket for side stops and further accessories - Gauge for transferring the position of the cast stops - Coupling system for table extension

Condition: good (used), functionality: fully functional, Swing type row drilling machine, 19 spindles, pneumatic clamping Lhodox Rbklepfx Akysf

Condition: used, Year of construction: 2023, New exhibition machine: List price €4,271 net Standard equipment: - Thread cutting device - Control panel with OLED display - Robust, high-quality drill head cover with ergonomically angled front - LED lighting - Quick-adjust and ergonomic drilling depth stop - Continuously variable speed control via central rotary knob - Emergency stop mushroom button - Thermal overload protection - Spindle stop Lhjdpsx Hwp Nofx Akyef - Drill guard with electrical interlock - Connection cable with Schuko plug - 3-year warranty for single-shift operation Technical data: Spindle: B16 Drilling depth (mm): 60 Maximum thread cutting capacity (depending on pitch): up to M10 Digital speed display Digital drilling depth display Drilling depth stop: positive-locking ring Manual feed Table height adjustment via rack and pinion Motor: Three-phase, frequency-controlled Power supply: 230 V (kW): 0.54 Continuous/normal drilling capacity (mm): 13/15 (in E335/ST60) Throat (mm): 220 Column diameter (mm): 70 Usable table surface (W x L) (mm): 300 x 250 Distance spindle – work surface (mm): max. 750 Center offset (mm): 20 T-slot size, spacing (mm), number: 2, 125 Dimension width (mm): 13/26 Spindle speed stepless electric (rpm): 40–4,000 Machine dimensions (mm): Without safety cover: 420 x 540 x 1,780 With safety cover: 572 x 936 x 2,142 Weight (kg): 85 Incl. drilling package 1 #296590: Machine vice Flott [felix] 2.0 80 and quick-release drill chuck 1–13 mm (accuracy 0.17 mm) Location: Rieth

Condition: used, Year of construction: 1977, operating hours: 250 h, functionality: fully functional, machine/vehicle number: 704384, drilling depth: 80 mm, total length: 1,500 mm, total height: 1,200 mm, overall weight: 640 kg, drill spindle length: 100 mm, compressed air connection: 5 bar, working width: 1,200 mm, height adjustment type: mechanical, space requirement width: 1,200 mm, pressure: 5 bar, power: 4.4 kW (5.98 HP), Machine in excellent condition. Inspection by appointment. Lodpfjx Dbg Rsx Akyjhf

Condition: ready for operation (used), Year of construction: 1979, functionality: fully functional, compressed air connection: 5 bar, From business closure Schleicher dowel drilling machine DBS 1000 Year of manufacture: 1979 Ledpjx Avf Ssfx Akyehf Also ideal for line boring with 5mm holes, 32mm spacing Comes with 25 pcs. 5mm carbide-tipped brad point drills and 8mm carbide drills, as well as 16mm and 35mm drill bits for cup hinges and other drill bits Pneumatically tiltable to horizontal/vertical position Machine is mobile Payment in cash upon collection No warranty

Condition: used, Year of construction: 1981, Used machine Year of manufacture: 1981 Universal dowel boring machine with a swiveling drilling unit with fully automatic control with 2 safety pneumatic clamps Drilling gearbox motor 2.2 kW with 21 spindles Spindle pitch 32 mm with built-in oil damping Height adjustment 80 mm Lhsdjxx D D Iepfx Akyof Drilling depth 80 mm With chassis Weight 420 kg Availability: short-term Location: Flörsheim

Condition: like new (used), DEMONSTRATION MACHINE For sale is a Felder FD-21 dowel boring machine. The machine is in use in our showroom and is therefore in mint condition. Lhodpfx Akjxxi T Ueyjf Technical data: - Version with 21 spindles - 2 hold-down clamps - 2 stops, each 1.5 m, for line boring - 2 side stops with reading optics - Indexing system for side stop with 8 positions - Motor power: 2 HP - Year of manufacture: 2025 The machine is located in A-5431 Kuchl and can be inspected and picked up during our opening hours at any time. Subject to prior sale! Related terms: dowel milling machine, drilling machine, line boring Reference: R-A0117