Müller Maschinen und Anlagen GmbH

Condition: new, Year of construction: 2024, functionality: fully functional, working width: 300 mm, New sander from exhibition, complete with extraction system. Minimum workpiece dimensions: 50x50 mm. Maximum width: 300 mm. Maximum height: 0.5–100 mm. Gjdpoxbyvxefx Afpsbu

Condition: like new (used), Year of construction: 2021, operating hours: 100 h, functionality: fully functional, working width: 300 mm, sheet thickness (max.): 150 mm, pass-through width: 300 mm, nominal power: 7.5 kW (10.20 HP), LÖWER SmartGrinder SG 300 K Wet Grinding Machine for Grinding or Deburring Metal - 1 contact roller unit with height adjustment via gear and handwheel - Workpiece thickness: 0.5 - 150 mm - Abrasive belt size: 300 x 3000 mm - Additional conveyor belt: 300 x 3040 mm, profile spacing 240 mm - Additional conveyor belt: 300 x 3040 mm, profile spacing approx. 505 mm (6 sections) - Drive motor: 7.5 kW - Ammeter for performance display - Infinitely variable feed speed via conveyor belt: 2 - 9 m/min - Digital counter with zero reset (instead of absolute counter) - Upper tank with drain opening D = 120 mm - Two jet water nozzles, completely piped - Rubber-coated and grooved contact roller, 150 mm diameter - Contact roller hardness: 65° Shore - Additional HT grinding wheel, roller grit 120 - Infinitely variable abrasive belt speed: 7.5 - 22 m/s, adjustable via frequency converter and potentiometer for matching cutting speed during deburring or finishing - Grooved rolls for abrasive and conveyor belts - Height adjustment via handwheel, with digital display - Manual paper band filter with perforated sheet filter carrier above the settling tank. Includes holder, reel, and fleece roll. The filter fleece must be advanced manually. - Infeed guard with emergency stop - Additional rubber-coated pressure roller - Pneumatic belt tensioning - Rubber-coated spring-mounted pressure rollers, height and distance adjustable - Settling tank with matching pump - Dimensions (L x W x H): 1700 x 900 x 2400 mm - Weight: 685 kg - Operating voltage: 400 V, 50 Hz, 3-phase - Operating pressure: 6-8 bar - CE compliant Various VSM grinding fleece (100/180/240), approx. 3 pieces each at €153.00 each Various VSM zirconia alumina (80/120/240), approx. 15 pieces each at €16.35 each The machine has barely been used (only once in 2025!) and is in like-new condition! Absolutely WITHOUT defects Gbjdpoxbpt Hefx Afpsu Original price over €29,000 + VAT

Condition: excellent (used), Year of construction: 2007, Technical data: Material thickness: 0.5 – 20 mm Max. processing width: 1500 mm Number of units: 3 Godsw U Dmiopfx Afpobu Infinitely variable feed: 0 – 4 m/min Grinding motor drive power: 4 x 3.0 kW Motor power: 12.6 kW Dimensions (L x W x H): approx. 2730 x 1500 x 1550 mm Weight: approx. 2.3 tons Application areas: Double-sided deburring of flame-cut, punched, laser-cut, autogenously cut parts, as well as waterjet-cut components Condition: Very good condition, due to little use Operating hours: 35,000 Scope of delivery: Machine with LISSMAC extraction system

Condition: good (used), • Professional grinding machine ROLEI type EF165 • ANTRIEBSTECHNIK G Bauknecht GmbH motor • Power 0.37kW, speed 2850rpm • Three-phase power supply 380V, 5-pin plug • Large and stable work table Gsdsw Rd E Dopfx Afpobu • Fully functional, ready for operation • Ideal for workshop or production

Condition: good (used), Year of construction: 2012, 1 used deburring and edge rounding machine Manufacturer: Loewer Type: Cross Master DD 300 Year of manufacture: 2012 Gbjdpew Imucjfx Afpeu Working width: 300 mm Disc motors: 2×1.5 kW, 750 rpm Disc diameter: 400 mm Workpiece thickness: 0.3 to 100 mm Infinitely variable feed speed: 1 to 6 m/min Infinitely variable speed control (optional): 300-1100 rpm Extraction connection: 150 mm Machine dimensions (LxWxH): 1,600 x 1,800 x 1,700 mm

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 600 mm, sheet thickness (max.): 120 mm, workpiece height (max.): 120 mm, grinding width: 800 mm, The grinding and deburring machine offers an efficient solution for processing laser- and plasma-cut parts. These high-quality machines ensure excellent processing by rounding the edges of the parts and removing burrs, resulting in a significantly improved surface quality. Using the latest technology, our machines comply with all relevant CE directives and guarantee the highest safety standards. The user-friendliness combined with a robust design enables smooth integration into your production processes. Gsdjwzv E Eopfx Afpsbu With our grinding and deburring machine, you not only optimize processing times, but also increase the precision and durability of your products. Benefit from high-quality processing and increase your production efficiency.

Condition: as good as new (ex-display), Manual deburring and grinding machine Gjdpowvt Sfsfx Afpebu

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, The DiscMaster SF is equipped with oscillating disc stations from above and below for the simultaneous processing of two workpiece sides in one pass. The disc tools with flexible sanding flaps rotate and oscillate across the workpiece. This means that all internal and external contours are processed uniformly through 360°, regardless of the orientation of the contour. Gjdpfxjwp Ngxj Afpebu Loewer DiscMaster SF 2/2 - 1500 deburring machine (2020) Manufacturer: Loewer Type: DiscMaster SF 2/2 - 1500 Year of manufacture: 2020 Condition: very good, used max. sanding height : 80 mm max. workpiece width : 1500mm Disc motor - rated power : 4 x 2,2 kW disc motor - speed : 1.000 min-1 feed adjustment motor - rated power : 2 x 0.37 kW Height adjustment motor : 0,75kW Oscillation motor : 4 x 0.75 kW Operating voltage : 400 V Frequency : 50 Hz On-site fuse protection : 40 A Extraction connection dimension : 2 x 180 mm Air requirement : 5,500 m3 / h Minimum air speed at the machine connection : 30 m / s Negative pressure at the extraction connection : 2,750 Pa Operating pressure : 6 - 8 bar Length : 1,950 mm Width : 2,150 mm Height : 2,000 mm Weight: 3,400 kg Options: - Transport table infeed - Transport table outfeed - Sensor strip for even tool wear. Detection of the machine's occupancy and display at the infeed of the preferred loading position. Scope of delivery: - Documentation

Condition: good (used), Year of construction: 2014, machine/vehicle number: 11885, Offer 25129 Technical data: Gbjdpfx Afowpthmjpou - Abrasive diameter: 150 mm - Swivel head - grinding unit rotatable and swiveling on articulated arm - Dust drawer - Steplessly adjustable disc speed - Table dimensions: 1400 x 980 mm - Table height approx.: 870 mm - Drive: 400 V / 0.75 kW - Pneumatic connection: 6 bar - Required space approx.: W 1700 x H 1700 x D 1300 mm - Weight approx.: 400 kg

Condition: good (used), Year of construction: 2011, Edging and contouring - deburring machine ROLEI Type: 00645-KKE2 Year: 2011. Gbedpfxownpfle Afpou

Condition: excellent (used), Used Gecam - Euro Fintec 128 steel tube linisher / sander / polishing machine for sale Fintec 128 Tube finishing machine for sale Gsdpfx Aswbh Dysfpsbu Can be viewed under power with your steel tubes

Condition: excellent (used), functionality: fully functional, Used Fintec 130 Sheet Metal Corner Linishing Sanding / Finishing Machine For sale Gbedpfxewbhtns Afpeu With Spare Belts Ideal for sheet metal boxes

Condition: used, Year of construction: 2016, Working hours machine: 5320 h max. working width: 300 mm workable material thickness: 1-15 mm Tension: 400V / 50 Hz Total power: 13,5 A Total current consumption: 7,5 kW Insulation class: IP42 Infinitely variable feed speed: 0-2 m / min Length: 2600 mm Width: 2300 mm Height: 1300 mm Machine weight: 1900 kg Gbsdov N I Hlspfx Afpsu Standard configuration - With a magnetic table designed for part dimensions of 25 x 25 x 1 mm up to maximum 200 x 200 x15 mm (geometry-dependent)- With vacuum table for part dimensions of 45 x 45 x 1 mm up to maximum 200 x 200 x15 mm (geometry-dependent)- Time consuming turn-over of parts with a second pass is not necessary- Swinging away of the innovative turning station makes it possible to deburr parts longer than 200 mm- A higher level of automation ensures an economic and reliable deburring process, also for large quantities of parts- A high and sustainable deburring quality.- Dry deburring process (no chemical additives as used in tumblers)- Small parts are returned to the front of the machine and gathered in a box. No extra walking back and forth for the operator.- Energy-efficient- The deburring process ensures an even wear of the belt and brushes across the entire width of the machine- Fast and simple tool Change- Simple and intuitive operation of the machine- Modern, compact machine design Extended machine accessories

Condition: used, Material width: 1000 mm workable material thickness: 1-20 mm min. part length: 150 x 100 mm Gsdjvbx Rxopfx Afpsbu Required power: 4 x 4,8 kW Rotation speed: 1400 rpm Length: 2220 mm Width: 1500 mm Height: 1500 mm Weight of machine approx.: 1550 kg Standard configuration - Oxide layer removal on inner and outer contours of lasered sheets up to 20 mm sheet thickness- Two-sided processing saves costly turning - no quality problems during further processing - Defuse the razor-sharp laser cutting edges - Improvement of surface quality by removing rust, scale and dirt - Oil film is retained

Condition: used, Year of construction: 2020, machine/vehicle number: 031EP-2020, Lg.no. 24558 Technical data: - Abrasive diameter 150 mm - Sanding unit swivels on articulated arm - Swivel radius of sanding arm 2000 mm Gjdpfxovazz Dj Afpsbu - Motorized dust extraction - Infinitely variable disc speed - 800 - 2200 rpm - Table dimensions 1500 x 880 mm - table height approx. 920 mm - Drive 400 V / 3.6 kW - Space requirement approx. W 1600 x H 1600 x D 1600 mm - Weight approx. 250 kg

Condition: excellent (used), Product Information "POLY-PTX 800 satin finishing machine" From the inventor of the longitudinal sander. Our multifunctional longitudinal sander with 1750 watts of power, speed control, ergonomic design and versatility - including up to 150 mm working width. High torque and power reserves guarantee professional, continuous use and greater profitability. Features: Infinitely variable speed control from 1000 to 3800 min-1 with a tachogenerator to ensure constant speed even under load. Grinds from coarse to fine. Balanced, simple manual guidance without support rollers. This allows free movement (oscillation effect). Guarantees shadow-free, seamless, highly decorative surfaces in satin, matte and industrial finishes. It satin polishes to a mirror shine and refines the surfaces of stainless steel, steel, non-ferrous metals such as brass, bronze, copper, aluminum, as well as wood. Finest sanding on large surfaces, without shadows or edges. Removes welds, deep scratches, rust, dirt, layers of paint and oxides. Goes from coarse grinding to mirror shine on stainless steel and non-ferrous metals in just three steps. It's also ideal as a round tube grinder using a sanding belt roll. Grinds and polishes open and closed pipe structures. Gjdpfx Afsu Su Tzepebu For pipe processing, the "hole system" allows safe and fast bonding of fleece and felt tapes to closed pipe structures. It does not require complex tape bonding. Huge range of grinding tools , which offers a solution for every task. With rubberized handle for optimal handling! Set contents: 1 POLY-PTX® 800 basic unit 1 robust, impact-resistant plastic carrying case 1 QUICK-LOCK cable 4 m 1 POLY-PTX® mounting screw 1 fleece disc 100 mm wide Machine type: Satin finishing machine Cable/battery: Cable Suitable tools: Brushes, bushings, polishing rings, wheels Plug type/power connection: EU (C+F) 220-240 V ~ 50-60 Hz Power consumption: 1750 watts Max tool size: Diameter 115 x width 100 mm Tool holder: 19mm spline shaft WEEE Reg. No.: DE 51395731 Speed in min-1: 1000 - 3800

Condition: new, The EM 250, a robust Tube End Finishing Machine from KNUTH, is designed to provide precise deburring of tubes, profiles, and flat materials, making it an essential addition to any cold circular saw, shear, or profile processing setup. This powerful machine allows for effective deburring both inside and outside the workpieces utilizing a sturdy wire brush, ensuring that chips and burrs are thoroughly removed while maintaining the integrity of the cutting edge. With a motor rating of 2.2 kW and a speed of 3,000 1/min, the EM 250 is ready to enhance productivity in any workshop engaged in tube processing. It features a rigid machine foot and is equipped with a vacuum exhaust connection for cleaner operation. Moreover, it comes with a 5-year warranty for the drive motor, underscoring its reliability. For a well-rounded solution in Tube End Finishing Machines, consider the EM 250. Request a quote today to learn more about this powerful tool in Tube and Profile Processing. Gsdpfx Aeu E H Tgsfpsbu

Condition: ready for operation (used), continuously adjustable facet angle from 30 to 45 to 60° Gsdpfxeuriv Ae Afpjbu Facet width for workpiece thicknesses of 2.5 mm: 0 - 10 mm Tool diameter: 170 mm Speed: 2800 rpm Drive motor: 380 V, 550 W Space required: 500 x 390 x 370 mm

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 800 mm, sheet thickness (max.): 120 mm, workpiece height (max.): 120 mm, grinding width: 800 mm, The grinding and deburring machine offers an efficient solution for processing laser- and plasma-cut parts. These high-quality machines ensure excellent processing by rounding the edges of the parts and removing burrs, resulting in a significantly improved surface quality. Using the latest technology, our machines comply with all relevant CE directives and guarantee the highest safety standards. The user-friendliness combined with a robust design enables smooth integration into your production processes. Gedpfxoulauve Afpobu With our grinding and deburring machine, you not only optimize processing times, but also increase the precision and durability of your products. Benefit from high-quality processing and increase your production efficiency.

Condition: good (used), Year of construction: 2012, machine/vehicle number: 00512S42, Offer 24379 Precision deburring and beveling machine / edge trimming machine Technical data: Steel - Stainless steel - Aluminum - Plastics ,- Processing Deburring and faceting process is carried out with milling cutter Facing cutterhead with indexable inserts Motorized feed module Bevel angle adjustment 45 ° Continuously adjustable bevel width 0 to 10 mm Gjdjud Ngqjpfx Afpebu Speed 2800 rpm Drive 400 V / 1.5 kW Space requirement approx. W 600 x D 750 x H 950 mm Weight approx. 90 kg

Condition: good (used), Year of construction: 1991, machine/vehicle number: ST-B-1661, Offer 24154 Technical data: Gjdpfetwmv Eox Afpebu - Brush diameter 250 mm - Brush width 60 mm - Disc speed 1500 / 3000 rpm - Drive 400 V / 1.0 / 1.4 kW - Working height 900 mm - Space requirement approx. W 650 x H 1150 x D 450 mm - Weight approx. 100 kg

Condition: new, Year of construction: 2025, -TFON Lite SURFACER® Series The TFON Lite SURFACER® Series enables simultaneous processing of multiple parts, offering unmatched versatility through a range of consumable options and an efficient vacuum table system. Designed for ease of use, it features quick brush changes and the capability to mount two different brushes tailored to your specific applications -With brushes mounted parallel to the table, the system guarantees flawless grinding performance with every use. Ergonomically engineered, the motor weight is supported by the machine frame itself, significantly reducing operator fatigue and improving workplace safety -Backed by TFON’s trusted guarantee, the SURFACER® Series strikes the perfect balance between minimizing operational costs and maximizing finish quality Gbsdpfx Afoqzxhyopju Key Specifications: -Minimum Material Size: 80 × 80 mm. Material Thickness: 3 – 200 mm. Maximum Material Width: 800 mm. Maximum Material Length: 500 mm.

Condition: new, Year of construction: 2025, Available from stock! Deburring and fine grinding machine with 3 workstations: Sanding belt - Brush station - Sanding belt Effective maximum working width: 1150 mm Standard workpiece thickness: 0.8 - 150 mm Digital workpiece thickness display on the control panel, accuracy 0.1 mm Adjustable pressure rollers before and after the workstations Sanding belt insertion on the left Sanding belt centering via electronically controlled photocell, emergency stop in case of skew or belt breakage Infinitely adjustable conveyor feed speed Includes the following options: Machine base prepared for forklift loading Extraction collector in galvanized sheet metal for machines with 3 work stations plus 1 external unit Vacuum device to increase the adhesion of small or slippery workpieces to the conveyor. With perforated feed table and carpet, as well as a powerful electric fan and sound-insulated exhaust according to CE standards, 5.5 kW 2x grit sets for electronic fine positioning of the contact rollers Adjustment and display (0.01 mm) on the control panel, standby position with pneumatic reset of the contact roller in the event of an emergency stop Frequency-controlled drive motors for sanding belt cutting speed, motor power per unit 11 kW Electronic adjustment of the brush unit Godpfx Afopwh Tfopsbu HMI Vision - PLC control with visualization of the various machine settings via color touchscreen Storage capacity for up to 250 sanding programs

Condition: good (used), Year of construction: 1985, machine/vehicle number: 2.309.044, Offer 23195 Precision - deburring - faceting milling machine / edge milling machine Technical data: Steel - stainless steel - aluminum - plastic ,machining Gsdpjnvdtcsfx Afpsbu deburring and faceting process is done with milling cutter Bevel angle 45 ° bevel width infinitely variable length of guide bar 500 mm working height 750 mm speed 2750 rpm drive 400 V / 0,7 kW space requirement approx. W 500 x D 400 x H 8500 mm Weight approx. 30 kg

Year of construction: 2023, condition: new, ! Offers for customers from Baltic states only: Lithuania, Latvia, Estonia. - Mobile and compact setup - Standard with vacuum system 2.2 kW - Optional with 2 or 4 electromagnets - Equipped with 2 grinding heads - Bracket with double hand control (CE marking) - Workpiece width: max. 780 mm / length unlimited - Power consumption of machine: 400 V, 50 Hz, 10 A, 6 kW Gbjdoixz Hdopfx Afpeu - Dimensions: 1435 x 1100 x 1510 mm (L x W x H)