RG Pack

Condition: reconditioned (used), functionality: fully functional, Year of construction: 1997, Haul-Off, used Manufacturer: Blake Kunststoffproduktionsanlagen Type: 303-1600-270 Year of manufacture: 1997 Gusdoz Ark Rjpfx Adtjg Pulling force: approx. 40,000 N Tread width: 300 mm Passage width: max. 500 mm Passage height: appr. max. 200 mm Effective contact length: 2400 mm Haul-off speed: stage 1: 0,5 - 4,0 m/min., stage 2: 1,0 - 8.0 m/min. Extrusion height: 1000 – 1200 mm Caterpillar clamping: pneumatic, at the front and back Dimensions: 4000 x 1200 x 2300 mm (LxWxH) Weight: approx. 3000 kg Condition: recondition and checked for function

Condition: good (used), ECKOLD R 320 is a specific forming tool specially designed for use with an Eckold Kraftformer Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Gsdpfxez Arkqj Adteug

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, TECHNICAL DETAILS Gsdpfxez Arkko Adtsug CONTROL Control system: Heidenhain iTNC 640 TRAVEL RANGES Travel range X-axis: 1,600 mm Travel range Y-axis: 800 mm Travel range Z-axis: 800 mm Rapid traverse X-axis: 32 m/min Rapid traverse Y-axis: 32 m/min Rapid traverse Z-axis: 32 m/min TABLE AND WORKPIECE Table length: 1,700 mm Table width: 800 mm Workpiece length max.: 1,700 mm Workpiece width max.: 800 mm Workpiece height max.: 800 mm Workpiece weight max.: 1,500 kg SPINDLE Number of spindles: 1 Tool holder: SK 40 Clamping diameter: 40 mm Spindle motor power: 37 kW Torque: 235.5 Nm Spindle speed: 1–10,000 rpm Speed control: stepless Air supply through the spindle: available TOOL CHANGER Tool magazine capacity: 60 Tool changer: accessible from the front COOLANT Internal cooling: 20 bar Filter unit: strip filter unit MACHINE DETAILS ELECTRICAL SYSTEM Input voltage: 380 V Input current type: three-phase DIMENSIONS AND WEIGHT Overall length: 5,800 mm Overall width: 4,300 mm Overall height: 3,000 mm Footprint width: 4,300 mm Machine weight: 15,000 kg OPERATIONAL DATA Operating hours: 2,509 h Date of operating hours: 15.09.2026 Initial commissioning: 24.01.2024 EQUIPMENT CE marking Chip conveyor Documentation/manual Glass scales in all 3 axes Hexagon 3D infrared probe system Mobile electronic handwheel Internal cooling with 20 bar and strip filter unit Air supply through the spindle Tool changer with 60 positions, accessible from the front

Year of construction: 2018, condition: ready for operation (used), Work piece handling system manufactured in 2018. This TOP Automazioni Top Loader ETL 10-75 has a total weight of 2500 kg. If you are looking to get high-quality handling capabilities, consider the TOP Automazioni Top Loader ETL 10-75 machine we have for sale. Contact us for further details. Gjdpfx Adoz Arkdjteug - Total Weight: 2500 kg

Condition: new, Year of construction: 2026, machine/vehicle number: YC27-200T, functionality: fully functional, pressing force: 200 t, stroke length: 180 mm, operating speed: 8 mm/s, reverse speed: 140 mm/s, table width: 940 mm, table length: 740 mm, table height: 750 mm, throat depth: 400 mm, overall weight: 14,000 kg, Equipment: CE marking, documentation/manual, Digima YC27-200T Single-Column Press Hydraulic C-frame press with a 200-ton capacity for metal forming. The Digima YC27-200T is a modern, hydraulic single-column C-frame press designed for a wide range of metal forming processes. This machine is suitable for cutting, blanking, bending, light stamping, straightening shafts, and processing components requiring very high clamping forces. The C-frame design provides convenient access to the work area from three sides, facilitating material handling, workpiece positioning, and tool changes. The welded steel frame ensures high rigidity, minimizes deformation under load, and supports process repeatability. Key Advantages Why choose the Digima YC27-200T press? 200-ton capacity — very high working force for blanking, bending, stamping, and straightening components. C-frame design — access to the work area from three sides simplifies operation and tool changes. Welded steel frame — high rigidity, reduced deformation, and stability under load. Integrated valve block — compact hydraulic system design and rapid machine response. Fully enclosed drive — increased work safety and easier machine maintenance. Intuitive operation — lever-pedal system and control panel support comfortable operator use. Applications Where will the YC27 hydraulic press be useful? The Digima YC27-200T single-column press is designed for use in production facilities, tool rooms, maintenance departments, and industrial workshops where high clamping forces, convenient workpiece positioning, and a repeatable work process are required. Bending and forming — processing metal components using appropriate tooling. Blanking and cutting — working with parts requiring high, controlled clamping force. Light stamping — application in metal component forming processes. Straightening shafts and components — correction of machine components and technical parts. Tool rooms — assembly, fitting, testing, and servicing of production tools. Industrial production — repetitive operations with stable and safe working conditions. Technical Specifications: Model: YC27-200T Gusdpfxez Ari Te Adtsg Machine type: Hydraulic single-column C-frame press Nominal capacity: 2000kN/200ton Motor power: 18.5kW Maximum system pressure: 25MPa Stroke adjustment: 10-180mm Maximum slide stroke: 180mm Maximum mounting height / clearance: 80-380mm Table height from the ground: 750mm Slide dimensions: 770x580mm Table opening: 250mm Mounting hole: Ø70 mm Throat depth / outreach: 400mm Fast descent speed: 21 mm/s Working speed: 8mm/s Return speed: 140mm/s External machine dimensions: 1800x2100x3600mm Machine weight: approx. 14000kg Type: Press Brand: Digima Condition: New Main application: Cutting, blanking, bending, light stamping, straightening shafts and components.

Condition: new, Year of construction: 2013, This steam coil was ordered for a dryer made by Imesa. The coil is new. Dimensions: 48 x 42 x 25.5 cm Connections: 1 inch The coil has a value of 2600 euros. Gusdpfoz Ari Hsx Adtog

Condition: reconditioned (used), Year of construction: 2021, operating hours: 297 h, working width: 510 mm, area performance: 2,300 m²/h, overall weight: 230 kg, warranty duration: 12 months, water tank capacity: 42 l, Hako Scrubmaster B45 CL TB510 Scrubber-Dryer Gjdpfjz Aritjx Adtjug New SIAP 12V 105Ah gel batteries (2x) 2021 model year; 297 operating hours 510mm cleaning head (TB510) equipped with a new medium-stiffness disc brush, suitable for use on any surface New polyurethane squeegee blades, resistant to oils, greases, and petroleum-based substances. Built-in battery charger and wheel drive facilitate daily operation New splash guard around the brush head prevents water from spraying outside the machine's footprint Equipped with a new, durable drain hose and suction hose New suction motor ensures high water extraction power from the squeegee Each unit we offer features individually taken photos; you are buying the exact machine shown TECHNICAL DATA: Supply voltage: 24 V Brush working width (mm): 510 Squeegee working width (mm): 860 Theoretical coverage (m²): 2300 Brush speed (rpm): 210 Tank capacity (l): 42/42 Weight ready for operation (kg): ~230 Power (kW): 1.31 INCLUDED: NEW SIAP 12V 105Ah Gel Batteries (2x) NEW 24V 400W suction motor NEW 510mm PPL 0.5 disc brush NEW suction hose NEW drain hose NEW brush head splash guard Squeegee assembly with new oil-resistant blades Built-in battery charger Tenzi Normal fluid (5 liters) – FREE KEY FEATURES: 42-liter tank capacity allows for a large volume of cleaning solution, minimizing the need to stop work for refills The machine's design ensures excellent maneuverability. A tight turning radius allows for operation in narrow passageways and aisles. The parabolic squeegee ensures thorough suction of the solution from the cleaned surface. A wide working width (510 mm) ensures high area coverage. A highly legible and intuitive control panel.

Condition: new, Year of construction: 2021, Marel MS2610 Pinbone Remover High-quality pinboning The MS 2610 Pinbone Remover is a lighter version of our well-known standard pinboner, the MS 2612. It is designed according to the same principles, ensuring high-quality pinbone removal, and it can operate at the same speed as the MS 2612 to deliver maximum capacity. Manual adjustments Three pre-set speeds are available, allowing the pinbone roller to adapt to the varying condition of the fish. The pressure of the pinbone heads can be easily adjusted using a weight bar. The MS 2610 is available as a single-lane and dual-lane machine. Fast and accurate The MS 2610’s unique combination of accuracy and speed results in high yield and output, with the best pinboning quality often achieved at a belt speed of 4-5 m/min. Up to 18 fillets per minute, per lane Three pre-set speeds for the pinbone roller Gedpfez Arimox Adteug Quick-release system on conveyors Manufacturer: Marel Model: MS2610.10 Year: 2021 (new) Production hours: 0 Capacity: Up to 18 fillets/minute * Power: 0.4kW Machine dimensions L x W x H: 1,650 x 710 x 1,900 mm Machine weight: 180 kg.

Condition: good (used), Year of construction: 2012, overall weight: 55 kg, total height: 120 mm, total length: 490 mm, total width: 125 mm, Metal cutting Tooling GRESSEL - Duogrip 125mm MACH-ID 9710 Make: GRESSEL Type: Duogrip 125mm Year: 2012 Length:490mm Width:125mm Height:120mm Weight:55kg Gedpoz Arigjfx Adtjug Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1984, condition: refurbished (used), functionality: fully functional, drive type: V-snaren, Motor: 55 kW - 1500 RPM Tread die: 85 mm Die diameter: 362 mm Equipped with a cut-off knife on the door Weight: 1440 kg Guodpfx Aez Arh Njdtog 1 year warranty

Year of construction: 2013, condition: ready for operation (used), Smipack BP800AS Monoblock automatic shrink wrapper with an inline infeed and a pneumatic sealing bar Maximum Output: Up to 12 packs per minute (ppm) Sealing Bar Size: 760 mm Product Maximum Height: 380 mm Maximum Pack Length: 1200 mm Maximum Film Reel Size: 750 x Ø 350 mm Max film width: 750 mm Advised Film: LDPE 20 – 100 µ Power Supply: 220–240 V / 380–415 V (3PH + PE / 3PH + N + PE, 50/60 Hz) Installed Power: 17,180 W Air Pressure: 6 Bar Required Air: 13 Nl/p (normal liters per pack) Machine Net Weight: 625 kg Guodpfxoz Arh Ae Adteg Machine Dimensions: 2840 x 1410 mm (Height: 2105 – 2265 mm) Key Features FLXMOD® control system with a 7-inch full-colour touch screen and PLC.Memory Can store up to 50 different working cycles. Tunnel Conveyor: Built with heat-resistant glass fiber bars that support up to 30 kg and prevent rust. Infeed: Motorized upper and lower film unwinding with inverter-controlled adjustable speed.

Condition: good (used), Thread cutting head with Strehler jaws, thread cutting die, thread cutting machine, pipe thread cutting Gujdpsz Arhvofx Adtjg -Manufacturer: Alrowa, thread cutting head with Strehler jaws -Type: No6 -inch thread: 1 1/2 - 3" -Accessories: incl. 3 sets of Strehler jaws, see photos -Dimensions: 950/200/H150 mm -Weight: 15.7 kg

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 2,950 h, empty load weight: 6,700 kg, Manufacturer: JLG Gusdpfx Asz Arhpodteg Model: 400S Year: 2015 Capacity: 270 kg Operating hours: 2,950 h Max. working height: 14.19 m Max. platform height: 12.19 m Own weight: 6,700 kg

Condition: excellent (used), overall weight: 32 kg, total height: 125 mm, total length: 430 mm, total width: 130 mm, Metal cutting Tooling HILMA - TYP 125 MACH-ID 9714 Gedpfx Aoz Arhisdtjug Make: HILMA Type: TYP 125 Length:430mm Width:130mm Height:125mm Weight:32kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, functionality: fully functional, digging bucket width: 1,400 mm, 2 cubic meters, approximately, deep bucket Manufacturer: BSG Bucket with teeth and cutting edge. Gusdpfx Adez Arhcsteg

Condition: defective spare-parts repository (used), functionality: not functional, Year of construction: 2010, operating hours: 2,580 h, load capacity: 800 kg, lifting height: 1,000 mm, fuel type: electric, mast type: mono, battery capacity: 620 Ah, battery voltage: 24 V, fork length: 1,200 mm, total length: 2,950 mm, total width: 800 mm, fuel: electricity, STILL EK-X 790 – High-level order picker TECHNICAL DATA Lifting capacity: 800 kg Lifting height: 1.000 mm Mast: Mono (1S100) Fork length: 1.200 mm Drive: Elektro 24V Battery: 24 V/620 Ah (2009) Charger: Ohne/without Length: 2.950 mm Width: 800 mm Year of manufacture: 2010 Operating hours: 2.580 h Condition: not ready to drive Internal no.: 1309089 Gusdpfx Adoz Arg Sjtsg Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: as good as new (ex-display), Year of construction: 2021, machine/vehicle number: 2021xxx, Model UR10e – year 2021 – showroom item, like new. Gjdpfx Aez Argxjdteug Robot weight: 28 kg Payload: 10 kg Maximum reach: 130 cm Certification: IP54 Average power consumption: 400 W Repeatability: ±0.5 mm Linear speed: 1 m/s Force sensor: integrated Price: €15,900.00 + VAT

Condition: good (used), functionality: fully functional, Year of construction: 2016, operating hours: 3,379 h, Manufacturer: GSR Model: E200T Comfort X Year: 2016 Capacity: 250 kg Mileage: 43,416 km Operating hours: 3,379 h Working height: 20.2 m Gusdpfx Adsz Argrjtsg Max outreach: 13.0 m

Condition: good (used), functionality: fully functional, Year of construction: 2017, operating hours: 296 h, empty load weight: 7,400 kg, Manufacturer: Genie Type: Z45/25 J BI Year: 2017 Capacity (t): 227 kg Gujdpfx Aez Aq Rcodtsg Hours: 296 h Working height: 15.94 m Platform height: 13.94 m Horizontal reach: 7.65 m Weight: 7,400 kg

Condition: used, mileage: 217,000 km, power: 140 kW (190.35 HP), first registration: 11/2020, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 11/2026, color: silver, gearing type: automatic, emission class: euro6, number of seats: 3, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: 2nd battery (auxiliary battery) in cabin, 3-button remote control for central locking, overhead storage in driver's cab, Acoustic package, electrically folding exterior mirrors, exterior mirrors with blind spot assist, DAB tuner (digital radio reception), entry handle on rear right pillar, Driver assistance system: Attention Assist (drowsiness detection sensor), tachograph controls in front under overhead shelf, Suspension: Stabilization level I, fire extinguisher, vehicle without speed limiter system, rear lights partly LED, terminal strip for electrical connections (base of driver’s seat), instrument cluster with color display, chrome radiator grille, radiator grille frame in vehicle color, cable duct at rear portal, cable duct at side wall, side marker lights, metallic paint, engine PTO front with bracket for additional coolant compressor, MBUX multimedia system (10.25" touchscreen with navigation), Park Package with reversing camera, spare wheel with standard tires, spare wheel carrier under rear frame incl. jack, windshield wipers with rain sensor, LED High Performance headlights, sliding door cargo/passenger area left, rear mud flaps, Seats in driver's cab: double passenger seat, comfort sprung driver's seat, driver's seat base low, additional relay for auxiliary battery, rear door step, USB port center under dashboard (charging only), fleece battery 92 Ah, jack Additional features: 3rd brake light, storage compartment above windshield, storage compartment below dashboard passenger side, adaptive brake light, driver's airbag, Hill start assist, traction control (ASR), washer fluid level indicator, electrically adjustable & heated exterior mirrors (both sides), outside temperature display, automatic headlight activation, entry handle for sliding door at cargo partition, Electronic brake force distribution (EBV), Driver assistance system: Active Brake Assist, Side Wind Assist, Lane Keeping Assist, digital tachograph, rear door (opening angle 180 degrees), body/construction: standard high-roof panel van, keyless start, child lock, communication module (LTE) for digital services, fuel tank: main tank 71L, full partition wall in cargo area, steering column (mechanically adjustable), headlamp leveling system, Mercedes-Benz emergency call system, engine 3.0 L - 140 kW CDI CAT, wheelbase 3,665 mm, low emissions according to Euro 6 standard, sliding door cargo/passenger area right, driver's seatbelt system with warning device, seat upholstery: fabric, start/stop engine system, service interval display (Assyst), heat-insulating glazing (windshield with upper band filter), gross vehicle weight 3.5 t * Power steering * Partition wall * Central locking Air conditioning: Air conditioning Safety: ABS * ESP Parking aid: Camera * Rear * Front Between wheel arches: 96 cm The vehicle is in TOP condition!!! Gedpfx Adsz Aq Rvotjug Mercedes service history up to 160,000 km, 2 keys Financing available!

Condition: used, mileage: 169,000 km, power: 129 kW (175.39 HP), first registration: 02/2018, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 02/2026, color: silver, gearing type: automatic, emission class: euro6, total length: 7,350 mm, total width: 2,550 mm, total height: 3,500 mm, loading space length: 5,400 mm, Equipment: ABS, air conditioning, central locking, soot filter, tail-lift, FUSO Canter 7C18 box truck + tail lift * Tail lift * Power steering * Partition wall * Central locking * Hands-free system * Electronic tachograph Gusdpfx Ajz Aq Twedtjg * On-board computer Air conditioning: A/C Safety: ABS BÄR tail lift, 750 kg Towing capacity: 3,500 kg Cargo space: Length 5.40 meters Payload: 3,345 kg The vehicle is in very good condition Financing available

Condition: used, mileage: 96,500 km, power: 115 kW (156.36 HP), first registration: 09/2021, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 04/2026, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: Storage compartment on dashboard with USB port, audio system: digital audio system (DAB) with USB and Bluetooth hands-free, rear door (opening angle 260 / 270 degrees), automatic climate control, cargo partition wall with window, steering column (steering wheel) height and length adjustable, reversing aid with sensors, front and rear mud flaps, telematics system preparation (telematics box) Gsdpfx Ajz Aq T Djdteug Additional equipment: Traction control system (ASR), model: S-series, exhaust pipe lateral left, exterior mirrors electrically adjustable and heated, brake assist, interior roof light in cargo area, electronic brake-force distribution, driver assistance system: hill start assist (AAS), rear axle suspension: parabolic springs, front axle suspension: transverse leaf spring, tinted windscreen and side windows, 210 A alternator, speed limiter system 160 km/h, urea tank (AdBlue): 20 L, body/superstructure: high-roof van with extended rear overhang, fuel tank: 70 L, engine 2.3 L – 114 kW diesel, wheelbase 3520 mm, low-emission according to Euro 6d-TEMP standard, sliding door right side (cargo/passenger compartment), cab seats: dual passenger bench, maintenance indicator, gross vehicle weight 3.50 t Vehicle is in good condition! 2 units available! Financing possible via Santander Bank

Condition: used, mileage: 399,000 km, power: 128 kW (174.03 HP), first registration: 04/2017, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 06/2027, color: green, gearing type: mechanical, emission class: euro6, total length: 7,900 mm, total width: 2,550 mm, total height: 3,800 mm, loading space length: 6,050 mm, loading space width: 2,480 mm, Equipment: tail-lift, Equipment: Palfinger 1000 KG tail lift Speed control: Cruise control * hill start assist * lane departure warning system Guodpfx Adjz Aq T Rjtsg Climate control: No air conditioning or automatic climate control Hydraulic system: None Internal cargo space: L 6.05 m, W 2.48 m Payload: 2000 KG The truck is in very good condition! MOT valid until 06-2027

Condition: used, mileage: 227,000 km, power: 121 kW (164.51 HP), first registration: 08/2020, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 4,360 mm, Equipment: ABS, air conditioning, central locking, navigation system, soot filter, Equipment: Navigation system * Power steering * Partition wall * Central locking Speed control: Cruise control Air conditioning: Air conditioner Safety: ABS Payload: 1005 kg Guodpfx Aez Aq Ubedteg Transmission issues, 1st gear pops out, fully operational! Belgian registration!! No TÜV Absolute fixed price

Condition: used, mileage: 49,000 km, power: 132 kW (179.47 HP), first registration: 01/2020, fuel type: diesel, overall weight: 4,790 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Special equipment: Storage compartment in the roof lining of the cab, storage compartment on the dashboard with USB port, 13-pin trailer socket, audio system: digital audio system (DAB) HI-Connect with 7" color display and navigation, rear doors (opening angle 260 / 270 degrees), wooden floor in the cargo area with wheel arch covers and high side wall / door paneling, automatic climate control, steering column (steering wheel) adjustable in height and length, mud flaps at front and rear. Additional equipment: Trailer Stability Program (TSM), trailer socket preparation, traction control system (ASR), version: C-Series, side exhaust pipe on the left, exterior mirrors electrically adjustable and heated, brake assist, cargo area ceiling light, electronic brakeforce distribution, driver assistance system: hill start assist (AAS), driver assistance system: emergency brake assist AEBS + city brake, driver assistance system: proactive lane departure warning system (LDWS), digital tachograph, front axle suspension: torsion bar, tinted windscreen and side windows, alternator 210 A, urea tank (AdBlue): 20 liters, body/type: high roof van standard, fuel tank: 70 liters, engine 3.0 liters - 132 kW diesel, wheelbase 3520 mm, spare wheel with road tires, spare wheel holder in cargo area, low emissions according to Euro 6d emissions standard, right sliding door for load/passenger compartment, seats in cab: double passenger seat, maintenance indicator, permitted gross vehicle weight 5.20 t, twin tires on second axle / rear axle. First registration 11-2019 but model year 2020!!!!! The vehicle is in good condition! New Tüv and emissions inspection available for an additional charge. Gusdjz Aq Uhspfx Adteg Financing available through Santander Bank.