Gaubies

Condition: ready for operation (used), Year of construction: 1983, Immediately available from location Fasti Swivel Bending Machine Type 212 – 25 - 5 Year of manufacture: 1983 Bending length: 2,550 mm Material thickness: 5 mm Back gauge Drive: 7.5 kW Bending tools Weight: 5 t Offered at EUR 7,500 plus VAT, ex site Nodpfxoxzdrwo Ad Ajdd

Year of construction: 2022, condition: ready for operation (used), Offered is an SLM280 2.0 Single 700W year 2022, approx. 5350h, SLM MCS control. Accessories: Cooling package HRS050 L/W, sieving station PSM100 V3, handling device BPH280, bottle lift, material change kit. SLM280 2.0 complete incl. PSM100, powder container, substrate plates (1.2709 & AlSi10Mg), additional filter housings, filter elements. Fully serviced annually by SLM Solutions (service reports available). Availability from 01.12.2025, inspection possible by arrangement. Nedpfx Aoxy R Ezed Ajdd

Year of construction: 1998, condition: ready for operation (used), Immediately available ex-stock: Hydraulic guillotine shear Hera Model TK 3000 / 10 Year of manufacture 1998, very few operating hours (like new condition) Motorized backgauge Backgauge travel 1000 mm (CNC controlled) Machine control: Siemens Simatic CP 7 Cutting length 3050 mm Nedpfxexy N Eyj Ad Ajdd Material thickness up to 10 mm Drive power 15 kW Weight 8 t Offered at €13,500 plus VAT ex-location.

Condition: ready for operation (used), Year of construction: 2000, Immediately available from location: Pipe bending machine Tracto Technik Type Tubomat 642 Year of manufacture: 2000 Pipe diameter: max. 42 mm Pipe diameter: min. 6 mm Material thickness: 3 mm Minimum bending radius: 180 mm Maximum bending radius: 5 mm Drive: 1.5 kW Weight: 1000 kg Pipe bending machine with electric control, 4-way preselection of bending angles with digital display Hydraulic bending drive, operated via manual lever valve Traveling pressure die (slide guide) Hydraulic mandrel retraction Pipe circular saw with coolant lubrication and automatic feed Pipe deburrer for internal and external deburring Machine is mobile and can be used flexibly Nsdpjxy N Emjfx Ad Aedd Price: EUR 8,500.—plus VAT ex works

Condition: ready for operation (used), Year of construction: 1990, Available immediately ex location: CNC Trumpf punching machine Type: Minimatic 100 Year of manufacture: 1990 Punching force: 15 t Control: Sinumerik 3 N Drive: 7.5 kW Sheet thickness: 1–4 mm Travel distances X/Y: 750/750 mm Axis movement X/Y: 750/750 mm Ndjdpexy N Egsfx Ad Aod Weight: 4 t Many tools included Price: EUR 4,500 plus VAT ex location

Year of construction: 1995, condition: ready for operation (used), Immediately available at location: Boschert punching nibbling machine Type KST 40 / 750 PowerLine digital Year of manufacture 1995 Press force 40 tons Stroke height 40 mm Punch diameter max 105 mm Sheet thickness max 10 mm Extension tables left and right Quick-change system Digital backgauge system x-axis 0 – 1500 mm left y-axis 0 – 750 mm Tools Ndsdpfoxy N Eaex Ad Ajd Weight 3 tons At the price of Euro 2,000.-- plus VAT ex location.

Year of construction: 1991, condition: ready for operation (used), Available immediately from location: Technoimpex hydraulic guillotine shear Type HS 5 / 2550 Year of manufacture 1991 Cutting length 2550 mm Material thickness 5 mm Digital backgauge 1000 mm Drive 5.5 kW Weight 4 tons Ndjdjxy N D Nepfx Ad Asd Price: EUR 4,500 plus VAT, ex location

Condition: good (used), functionality: fully functional, Technical details tool taper VDI 40 DIN 69880 number 22 Stück Additional information A range of tool holders in good condition. Tool holder size: VDI 40, DIN 69880 Were used on a Gildemeister CTX 500 E CNC lathe. Quantity: 1 driven tool holder, angled design. 18 driven tool holders, straight design. 3 standard tool holders. Njdpoxy I Aqjfx Ad Asdd Only sold in a package!

Condition: excellent (used), very good condition. video available Ndjdpfx Aoxyxinod Aed

Year of construction: 2022, condition: excellent (used), controller manufacturer: SLM, CONTROLS .. CNC controls SLM ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V Ndedpfx Adoxyvy Dj Ajd .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 2600 mm .. space requirements -front/back-: 1200 mm .. total height: 2700 mm Machines in excellent condition serviced annually by the manufacturer (service reports available). ... Accessories: - HRS050 L/W cooling package, - PSM100 V3 sieving station, - BPH280 handling unit and bottle lift, - Material change kit, - SLM280 2.0 complete including PSM100, - Powder hopper, - Substrate plates (1.2709 & AlSi10Mg), - Additional filter housings and filter elements, etc. Build volume: 280 x 280 x 365 mm minus substrate plate height Machine configuration: Single optic, 1 x 700W Build rate: up to 113 cm³/h (material dependent) Laser lifespan: 1500 h Variable layer thickness: 20 μm - 90 μm Min. feature size: 150 μm Focus diameter: 80 - 115 μm Max. scan speed: 10 m/s Average protective gas consumption during the build process: 5.0 l/min (argon) Average protective gas consumption during the flooding process: 110 l/min (argon)

Condition: new, 5000 kg Nsdpfx Ajxylnwjd Aodd height 500 mm width 1200 mm nein 1200 x 100 mm 1,2 x 0,53 x 0,5 m Support stand, assembly stand, steel stand, welding table, assembly table, steel trestle, work trestle - Our jack stands are characterized by their stable construction, high load-stable stability and indestructible service life. - powder-coated in RAL 5010 gentian blue - Transport on request - CE marking

Condition: new, 5000 kg height 800 mm width 1200 mm nein Nsdoxylnqspfx Ad Asdd 1200 x 100 mm Support stand, assembly stand, steel stand, welding table, assembly table, steel trestle, work trestle - Our jack stands are characterized by their stable construction, high load-stable stability and indestructible service life. - powder-coated in RAL 5010 gentian blue - Transport on request - CE marking

Condition: new, 2000 kg height 500 mm width 1200 mm nein Nedpfsxylnkjx Ad Asdd 1200 x 100 mm 1,2 x 0,53 x 0,5 m

Condition: good (used), functionality: fully functional, Year of construction: 2018, TRUMPF TruMicro 7060 (FK03) – Ultra-Short Pulse Industrial Laser / Precision Laser System Manufacturer: TRUMPF Laser GmbH Location: Schramberg, Germany Model: TruMicro 7060 (FK03) Equipment No.: L1570M0181 Ndodpfxjxyk I Ne Ad Asd Year of Manufacture: October 2018 Condition: Used, well maintained Description The TRUMPF TruMicro 7060 (FK03) is an industrial laser system designed for high-precision applications. Manufactured in Germany by TRUMPF, this device features a premium, robust construction with IP54 protection rating. Thanks to its high electrical power connectivity and highly stable 3-phase supply, this type of laser is suitable for demanding industrial manufacturing processes where high accuracy and reliability are critical. Technical Data (according to nameplate) Electrical Data Power supply: 380 V -10% … 460 V +10%, 3AC + PE Frequency: 50 – 60 Hz Power consumption: 6 kW / 6.3 kVA Current: 9 A / 400 V Protection & Standards IP rating: IP54 Icn / SCCR: 5 kA CE certified Compliance: 21 CFR Chapter 1, Subchapter J (Laser Safety) Mechanical Data Weight: 580 / 510 kg (two values listed on nameplate) Additional Information Document number: 20-09-05-A10 Manufacturing date: October 2018 Condition & Notes Original nameplate fully intact Clean external condition

Year of construction: 2015, operating hours: 37,500 h, condition: like new (used), functionality: limited functionality, GAS FIRED WET ENAMELING AND DRYING FACILITY Fully operational Gas-fired wet enameling and drying facility, ready for immediate start-up, featuring a natural gas-powered Ndsdpfjxx Skpjx Ad Aed line designed to produce high-quality products for the world's largest manufacturers, especially in the cast iron pots, pans, and boilers sector. This proven system ensures consistent, high-volume output to meet global industry demands. Filters,enamel mills,cast iron pots&pans moulds,sandblasting machine, vibratory surface finishing machine, lunge grill,Grinding machines .

Condition: good (used), Year of construction: 2021, functionality: fully functional, Used grinding line for circular saw blades Model: 2 × PRESTIGE (HSS/CERMET grinding machines) + 1 × LOAD-5 (5-station automatic loader) Condition: Used, in good technical and visual condition Saw blades: Ø250–630 mm Ndsdsxx Ix Aspfx Ad Ajd

Year of construction: 2010, condition: ready for operation (used), This MH 4ZHP was manufactured in 2010. It features a continuous furnace, cooling system, and a conveyor system with an accumulation section. Key specifications include a passage width of 650 mm, passage height of 1100 mm, and a total system length of 11.53 m. Ideal for operations requiring extensive heating and cooling processes. Contact us for more information about this machine. Nodpfx Asxx Dwbed Aedd Application Types Other Machine Tools

Year of construction: 2012, condition: ready for operation (used), General Data Machine weight 15000 kg Main Drive Ndedpfx Adjxx Dv Dj Ajd Spindle motor power 45 kW This INGRAMATIC RP72 L was manufactured in 2012. It features a double starter unit with TR7 dies, capable of threading diameters from M14 to M20. The machine operates at speeds up to 120 rpm, powered by a robust 45 kW motor. Weighing 15,000 kg, it is in very good condition and ready for immediate shipment. CE compliant and includes Brankamp control process. Contact us for more information about this machine. Application Types Other Machine Tools

Year of construction: 2010, condition: ready for operation (used), Movement X-Axis Movement 1500 mm Y-Axis Movement 1600 mm Z-Axis Movement 800 mm Njdpfx Ajxxng Hod Ajdd This 3-axis Sodick Picka PF-32A was manufactured in 2010. It's an electron-beam processing machine designed for high-precision surface treatments. Features include a vacuum chamber, a max workpiece size of 300 × 200 × 100 mm, and a beam diameter of up to 60 mm. Ideal for applications requiring fine finishing. Contact us for more information. Application Types Other Machine Tools

Condition: excellent (used), Year of construction: 2006, Trumpf VectorMark Workstation VWS 800 Year: 2006 Working area Njdpfxsxxa D Do Ad Asdd 700 x 300 x 350mm Dimensions 1385 x 1790 x 1000mm Weight approx. 420kg Controlled 4.axis rotary table With computer and software as per photos. Accessories Documentations

Condition: excellent (used), Expander tool by Rothenberger For pipe diameters: 12-15-18-22-28 mm Supplied in a sturdy metal case Nodjxxaa Sepfx Ad Aedd

Year of construction: 2015, condition: like new (used), functionality: fully functional, BA 35 CNC Profile Bending Machine – 3 Rolls – 2015 – Excellent Condition Machine in excellent condition, very low hours. Used only occasionally for small batches and precision bending. Fully functional, ready for operation, complete with CNC control console and complete documentation. Technical Details: Model: BA 35 CNC Year: 2015 Manufacturer: BPR Curvatrici (Italy) Rolls: 3 smooth feed rolls Shaft diameter: 35 mm Roll diameter: 95 mm Usable shaft length: 60 mm Max. pass-through height: 825 mm Roll rotation speed: 1–30 rpm Feed speed: 0–31 mm/s Cylinder force: 35,000 N Working pressure: 190 / 200 bar Noise level: < 70 dBA CNC & Control: 15" TFT display Manual / automatic / teach-in mode Program memory + mirror cycle Interfaces: Ethernet RJ45, USB 2.0, RS-232 Drive & Power: Gear motor: 1.1 kW Hydraulic pump: 3.0 kW Heat exchanger: 0.18 kW Voltage: 400/3 – 230/1 – 24 V Dimensions & Weight: Machine: 740 × 1020 × 1110 mm Console: 570 × 660 × 1120 mm Weight: 438 kg + 104 kg Condition: Like new, very clean, very little use Rolls in excellent condition, no wear Control unit fully operational Original photos attached Ndsdpfx Adexw Uywo Aed Price 25,000 EUR net (negotiable) VAT invoice available. Inspection possible.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 9M0902214, Degreasing machine as new. Manufactured by Maquinas y Sistemas de Lavado Industrial, Italy. Nodpfx Aexw R T Hsd Aedd Voltage: 400V/50Hz Pump: 0.37 kW Heating: 4 kW Rotation: 0.37 kW Gross weight for palletized transport: 100 kg

Condition: ready for operation (used), Year of construction: 2006, This EUBAMA S6 rotary transfer was manufactured in 2006. It features a robust base frame, hydraulic fittings, a Stöber servo motor with planetary gearbox, and a milling unit with NC feed. Ideal for precision, it also includes a face turning head and a length control system with a pneumatic cylinder and laser. Contact us for more information about this machine. Application Types Nedpjxwzy Djfx Ad Aedd Other Machine Tools

Year of construction: 2020, condition: ready for operation (used), Main Drive Spindle Speed 2900 RPM Spindle motor power 4 kW This CAMFIL Quantum Series 2 was manufactured in 2020. It features a robust steel construction, designed for continuous industrial use with a motor power of 4 kW and airflow of approximately 2,000 m³/h. Ideal for metalworking processes, it includes an energy-saving fan and a maintenance-friendly design with easily accessible filter elements. Consider the opportunity to buy this CAMFIL Quantum Series 2. Contact us for more information about this machine. Application Types Other Machine Tools Nodjxwzyqopfx Ad Asdd