NETEM Consulting

Condition: like new (used),

Condition: used, Year of construction: 2025, Special price - exhibition machine Technical specification WL 4 Hopper opening with log spacer 600 x 1,050 mm Hopper content 0.6 m³ Working width of the rotor 600 mm Diameter of the rotor 252 mm Drive power 18.5 kW Rotor speed 80 -120 rpm Number of knives 28 Type and size of knives concave / 40 x 40 mm, cutting reversible crowns Screen perforation 15-20 mm Painting WEIMA Standard RAL 2002 / 7016 Connected load 400 V +/- 5% / 50 Hz Weight approx. 1,300 kg Including: • Control cabinet* (Rittal) including electrical control (Moeller / Siemens) and star-delta start-up • Rubber vibration elements • V - rotor (patented) with knife pockets milled into the profile • Gear limit switch • Slider cycle • Slider half back • Log spacer hopper • 2. Knife series Storage location: Supplier Gijdpfx Aox Twd Tja Iol

Condition: used, Year of construction: 2025, Special Price - Showroom Machine Garbsen Our Machine Concept WL 6 The Weima High-Performance - Shredders with their flexible application possibilities can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer scraps, etc.) into fuel chips, achieving enormous volume reduction of material for bulky items. Functionality: The machine is equipped with a large feed hopper and can be fed with a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees continuous and cost-effective material feeding without the need for manual assistance. The hydraulically controlled pusher supplies the wood waste to be shredded to the cutting area of the rotor and is automatically and load-dependently controlled. The internal pusher guides are made of highly abrasion-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are suspended in a cardanic way to avoid lateral forces on the piston seals. The patented and profiled V-rotor made of solid steel has a diameter of 252 mm and operates with a rotor speed of 80 - 120 rpm. The concavely ground, aggressive, and 4-times reversible knives / cutting crowns are located in milled knife pockets on special knife holders; this patented system guarantees high throughput performance, low energy consumption, and optimum discharge of shredded material by reducing the cutting gap between counter knife and rotor for the first time. The screen located under the rotor determines chip size (10 - 100 mm ). A hydraulically opening screen basket is available upon request. Power transmission from the electric motors is via V-belts to a heavy-duty gearbox mounted on one end of the rotor shaft. Precise cut at high throughput with profiled V-rotor The specially developed by WEIMA V-rotor can be used universally and is made from solid material. Its aggressive material intake with up to two rows of knives guarantees high throughput with low power requirements. It can be equipped with hardened steel cutting knives with edge lengths of 30 mm and 40 mm. These can be turned several times in case of wear, which drastically reduces maintenance costs. Intuitive operation via Siemens PLC control with touch display To ensure that the electronics are optimally matched to the machine, we design, build, and wire our control cabinets ourselves. We use only high-quality components – for example from Siemens or Rittal. Intuitively operated touch surfaces guarantee quick adjustments. Functions such as setting the pusher stroke or stop ensure high throughput. The built-in overload protection also prevents defects on the machine. Technical Specification WL 6Feed opening 800 x 1,250 mmHopper capacity 0.9 m³Rotor length 800 mmRotor diameter 256 mmDrive power 22 kWRotor speed 90 rpmMax. number of knives 42 piecesKnife type and size concave / 40 x 40 mm, cutting crownsScreen perforation 10-60 mmPaint finish WEIMA Standard RAL 2022 / 7016Connection value 400 V +/- 5% / 50 HzWeight approx. 1,600 kgIncluding: - Control cabinet* (Rittal) incl. electrical control (Moeller/Siemens) and S Godpfx Aex Twdmea Ieil

Condition: excellent (used), Year of construction: 2012, Used machine from business closure. GROSS shredder - Model GAZ 62 - Year of manufacture: 2012 - 18.5 kW - good condition Gedpfsx Tp U Rjx Aa Isil - available immediately

Condition: used, Year of construction: 2022, operating hours: 26 h, functionality: fully functional, machine/vehicle number: 193-1036, MORBARK WH2400XP wood chipper from 2022 in good condition. Serial number 193-1036. Giedpex Tp Iqjfx Aa Isl

Condition: used, Year of construction: 2022, operating hours: 420 h, functionality: fully functional, machine/vehicle number: 196 1040, MORBARK WH3000XP chipper from 2022 in good condition. Serial number 196 1040. Gsdex Tp Hyjpfx Aa Isil

Condition: excellent (used), Catalogue number 7374 TECHNICAL DATA - Upper feed hopper dimensions (L/W): 840x620 mm - Lower feed hopper dimensions (L/W): 300x300 mm - Rotor width: 340 mm - Motor: 22 kW - Screen: 15 mm - Number of knives: 6 pcs - Discharge for shredded wood: Ø 160 mm - Dimensions (L/W/H): 1400x800x2000 mm Gsdex Tpnqopfx Aa Ieil - Weight: 840 kg ADVANTAGES – German-made – Very good condition – Used wood chipper Net price: 23,900 PLN Net price: 5,690 EUR based on an exchange rate of 4.2 EUR (Prices may vary significantly with currency fluctuations)

Condition: excellent (used), Catalogue number 7687 TECHNICAL DATA - Inlet width: 540 mm - Inlet height: 300 mm - Shaft width: 630 mm - Shaft diameter: 700 mm Gedpjx Tg Hdefx Aa Ieil - Knife length: 630 mm - Number of knives: 2 pcs - Screen size: 40x40 mm - Bottom driven serrated shaft - Lower shaft motor: 4 kW - Top driven serrated shaft - Upper shaft motor: 4 kW - Belt feeder - Feeder belt length: 4720 mm - Feeder belt width: 500 mm - Main motor: 75 kW - Autoreverse (adjustable) - Overall machine dimensions (L/W/H): 3100x2000x1830 mm - Overall feeder dimensions (L/W/H): 4800x780x980 mm - Weight: approx. 5000 kg ADVANTAGES – German-made – Autoreverse – Used chipper, in very good condition Net price: 120,900 PLN Net price: 28,780 EUR depending on exchange rate at 4.2 EUR (Prices may vary in case of significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7726 TECHNICAL DATA - Feed hopper inlet – hydraulic lift 1200x1000mm - Discharge outlet for shredded wood diameter 200mm - rotor working width 980mm - Main motor 37kW - Number of knives 52 pcs - Knife size 40x40mm - Screen 20/25mm - Pressing drawer (hydraulic pusher) - Electric auto-reverse - Dimensions (L/W/H) 2520x2000x1740mm - Weight approx. 2500kg ADVANTAGES – German made – Screw conveyor (for wood chips) – Pressing drawer, serrated – Knives as new – New counter-knife – Very good condition – Used chipper Godox Tg E Hspfx Aa Ijil Net price: 106,900 PLN Net price: 25,450 EUR depending on exchange rate 4.2 EUR (Prices may vary with significant fluctuations)

Condition: excellent (used), 2 knives Knife width: 35 cm Drum diameter: 125 cm Drum width: 25/7 cm Maximum material height: 13 cm Maximum material width: 33 cm Outlet: 25 cm Gisdjx Tf E Ejpfx Aa Iol Motor: 45 kW Transport width: 200 cm, height: 150 cm, length: 280 cm

Condition: excellent (used), functionality: fully functional, Catalogue number 7442 TECHNICAL DATA - Infeed width: 410mm - Infeed height: 120mm - Shaft width: 430mm - Shaft diameter: 400mm - Number of knives: 2 pcs - Sieve dimension: 60x60mm - Top: toothed feed shaft - Bottom: 2 toothed feed shafts - Feeding belt length: 4100mm - Feeding belt width: 400mm - Auto-reverse - Main motor: 30kW - Feed motor: 2×1.5kW - Machine dimensions (L/W/H): 2300x1550x1500mm - Feeder dimensions (L/W/H): 4400x500x1000mm - Weight: 2135kg ADVANTAGES – Made in Poland – Auto-reverse (adjustable) Giedpfx Aaox S Nfys Iol – Equipped with conveyor belt – DTR documentation – used shredder, very good condition Net price: 76,900 PLN Net price: 18,300 EUR based on 4.2 EUR rate (Prices may vary with significant fluctuations)

Condition: excellent (used), Catalogue number 7411 TECHNICAL DATA - Infeed width: 400 mm - Infeed height: 180 mm - Shaft width: 430 mm - Shaft diameter: 430 mm - Knife length: 430 mm - Number of knives: 2 pcs - Screen dimensions: 60x60 mm - 2 gear-driven feed rollers from below - Lower feed roller motor: 1.5 kW - Gear-driven feed roller from above - Upper feed roller motor: 1.5 kW - Belt feeder - Belt feeder length: 2250 mm - Belt feeder width: 400 mm - Main motor: 30 kW - Auto-reverse - Overall dimensions (L/W/H): 4300x1630x1000 mm - Weight: 1800 kg - German made - Auto-reverse (adjustable) - Used chipper, in very good condition Net price: 69,900 PLN Net price: 16,640 EUR based on rate 4.2 EUR (Prices may change with higher fluctuations) Gisdpex S Nftjfx Aa Iel

Condition: excellent (used), Year of construction: 1974, Catalogue number 7685 TECHNICAL DATA - feed opening width: 440mm - feed opening height: 300mm - shaft width: 480mm - shaft diameter: 440mm - number of knives: 2 pcs - screen size: 50x50mm - toothed feed roller from top and bottom - shaft motor: 0.78/1.1kW - electric auto-reverse (adjustable) - with conveyor belt - feed belt length: 4006mm - feed belt width: 380mm - belt feed forward/reverse - main motor: 30kW - dimensions (L/W/H): 6100x1100x1100mm - weight approx. 2000kg ADVANTAGES – German-made Gijdex S Nbujpfx Aa Iol – with conveyor feeder – auto-reverse – used chipper, in very good condition Net price: 76,900 PLN Net price: 18,300 EUR depending on the exchange rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: excellent (used), Catalogue number: 7649 TECHNICAL DATA Infeed width: 900 mm Gisdpfx Aasx S Nawo Ijl Infeed height: 300 mm Shaft width: 1030 mm Shaft diameter: 700 mm Knife length: 1030 mm Number of knives: 3 pcs Screen dimensions: 70x70 mm Below: 2 toothed feed shafts Lower shaft motor: 7.5 kW Above: 2 toothed feed shafts Upper shaft motor: 7.5 kW Belt conveyor feeder Redler chain conveyor 5600 mm + 10600 mm, 2.2 kW Feeder belt width: 800 mm Main motor: 90 kW Reverse function Overall machine dimensions (L/W/H): 3300x3100x1700 mm Base for chipper dimensions: 3300x2080x1940 mm Feeder / Redler dimensions (L/W/H): 5600x900x1000 mm + 10600x1050x1600 mm Base for feeder belt dimensions: 5100x1300x2520 mm Total weight approx.: 16,000 kg ADVANTAGES – German-made – Redler-type chain conveyor equipped with scrapers – Reverse function – DTR technical documentation – Used chipper, in very good condition Net price: 258,900 PLN Net price: 61,640 EUR (according to exchange rate 4.2 EUR) (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7613 Technical specifications: - Feed opening width: 650mm - Feed opening height: 300mm - Shaft width: 660mm - Knife length: 660mm - Number of knives: 2 pcs - Screen dimensions: 90x100mm - 2 lower toothed feed rollers - Lower roller motor: 3kW Giedpfx Aasx S I Umj Ijl - 2 upper toothed feed rollers - Upper roller motor: 3kW - Belt feeder - Feeder belt length: 2700mm - Feeder belt width: 630mm - Main motor: 75kW - Autoreverse - Reverse gear - Overall dimensions (L/W/H): 5350x1300x1300mm - Weight: 4200kg FEATURES – Made in Italy – Autoreverse (adjustable) – Reverse gear – Used chipper, in very good condition Net price: 149,900 PLN Net price: 35,690 EUR (based on 4.2 PLN/EUR) (Prices may change with significant fluctuations)

Condition: used, Year of construction: 2005, SHREDDER KOMPTECH TERMINATOR 5000 E 200kW electric including control cabinet fully overhauled Gisdpfx Asx Szlfea Ijl new couling unit READY FOR DISPATCH

Condition: good (used), functionality: fully functional, SHREDDER Type Hammel 850 E - 2 x 110 kW - with outlet conveyor and magnet - with new belts for outlet conveyor and magnet - rotor length 1 900 mm Giedox Szkzopfx Aa Isl

Condition: good (used), Year of construction: 2014, CUTTING MILL TYPE PALLMANN PS-H 1000 x 1400, 132 kW Gsdpfx Aox Szkuoa Ieil very good condition with 3 sets of rotor and stator knives with 2 sets of screens, 5 and 8 mm AVAILABLE AND READY TO WORK

Condition: excellent (used), CATALOG NUMBER 7191 TECHNICAL DATA - Loading hopper inlet: 870x735 mm - Rotor working width: 720 mm - Main motor: 18.5 kW Gijdpfx Aajx Syqgo Iel - Pump motor: approx. 0.75 kW - Number of knives: 17 pcs - Knife size: 80x40 mm - Screen: 20 mm - Pressing drawer - Electric auto-reverse - Outlet for shredded wood: Ø250 mm - Dimensions (L/W/H): 2000x1350x1370 mm - Weight: 1586 kg ADVANTAGES – Pressing drawer – Very good condition – Used shredder Net price: 38,900 PLN Net price: 9,260 EUR based on an exchange rate of 4.2 EUR (Prices may change with significant rate variations)

Condition: excellent (used), Catalogue number 7291 TECHNICAL DATA - Infeed width: 500mm - Infeed height: 200mm - Shaft width: 630mm - Knife length: 630mm - Number of knives: 2 pcs - Sieve dimensions: 60x60mm - Lower toothed feed shaft - Lower shaft motor: 4kW - Upper toothed feed shaft - Upper shaft motor: 4kW Godpfx Aaox Syppe Ioil - Feed belt length: 4100mm - Feed belt width: 400mm - Feeder motor approx. 2kW - Main motor: 55kW - Autoreverse - Feeder dimensions (L/W/H): 4670x760x720mm - Machine dimensions (L/W/H): 2550x1800x1300mm - Weight approx. 4000kg – German-made – Autoreverse – Used chipper, in very good condition Original photos Net price: 118,900 PLN Net price: 28,300 EUR (based on exchange rate of 4.2 EUR) (Prices may vary with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7240 TECHNICAL DATA - Infeed width: 400 mm Gsdpjx Sypcsfx Aa Ioil - Infeed height: 210 mm - Shaft width: 530 mm - Shaft diameter: 500 mm - Knife length: 530 mm - Number of knives: 2 pcs - Screen dimensions: 55x50 mm - 2 toothed feed rollers from below - Lower roller motor approx. 3 kW - Toothed feed roller from above - Upper roller motor 1.5 kW - Feed belt length: 4600 mm - Feed belt width: 400 mm - Main motor: 55 kW - Autoreverse - Feeder dimensions (L/W/H): 4630x620x760 mm - Machine dimensions (L/W/H): 2510x1700x1200 mm - Weight approx. 3500 kg – German made - Autoreverse (adjustable) – Used shredder, in very good condition Net price: 85,900 PLN Net price: 20,450 EUR depending on rate 4.2 EUR (Prices may change in case of significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7176 TECHNICAL DATA - Loading hopper inlet: 1050x600mm - Outlet for shredded wood: 160mm diameter - Rotor working width: 590mm - Main motor: 18.5kW - Pump motor: 0.75kW - Number of knives: 14 pcs - Knife size: 30x30mm - Screen: 10x12mm Gisdpsx Sym Iofx Aa Isl - Pressing drawer - Electric auto-reverse - Dimensions (LxWxH): 1900x1200x1530mm - Weight: 990kg ADVANTAGES – Auto-reverse – German manufacturing – Unpainted – Like WEIMA WL4 – Pressing drawer – Very good condition – Used shredder Net price: 48,900 PLN Net price: 11,640 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: like new (used), engine power 22kW shaft width 410mm driven feed rollers sieve 30mm and 15mm Gjdpfxjx Sycie Aa Ieil inlet width 430mm

Condition: good (used), Year of construction: 2000, Stable free-standing screen for wood chips and sawdust. 3 fractions. Perforations of 45 and 6 mm. Screening area approx. 7.3 sqm. Capacity: 80 - 120 m³/h. Robust eccentric system at top and bottom. Drive: 5.5 kW. Dismantled and loaded onto truck free of charge. Gedpfxex Sxgye Aa Isil

Condition: excellent (used), Catalogue number 7262 TECHNICAL DATA - Top loading hopper inlet 780x620mm - Bottom loading hopper inlet 650x620mm - Outlet for shredded wood Ø160mm Gisdpfsx Swq Rsx Aa Iel - Rotor working width 600mm - Rotor diameter 248mm - Main motor 18.5kW - Pump motor 0.75kW - Number of knives 30 pcs - Knife dimensions 30x30mm - Screen 20x20mm - Press drawer - Electric auto-reverse - Dimensions (L/W/H): 1750x1200x1650mm - Weight 1200kg ADVANTAGES – German-made – Original DTR documentation – Not repainted – Auto-reverse system – Press drawer – Very good condition – Used wood chipper Original photos Net price: 38,900 PLN Net price: 9,260 EUR, depending on the exchange rate (4.2 PLN/EUR) (Prices may vary with larger currency fluctuations)