KARAT POLSKA Sp. z o.o.

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, spindle speed (max.): 5,000 rpm, Features - SF4-1: - Bed and tables made of cast iron with high precision - The cutter shaft is mounted in a rigid cast iron saddle Technical Specifications - SF4-1: The width of the workpiece being processed is max. 400 mm The length of the workpiece is min. 410 mm Isdpfxjy S Apls Ab Noat The maximum thickness of the removable layer is 6 mm Length of the tables: front 1504, rear 1004 mm The width of the tables is 410 mm The inclination of the side guide is 0 - 45 degrees Table lifting height: front 6, rear 2 mm The diameter of the cutter shaft is 125 mm The number of cutters on the shaft is 2 The shaft rotation frequency is 5000/min Motor power 2.8 kW The diameter of the chip extraction nozzle is 175 mm The extraction capacity is 1600 cubic meters per hour Weight 620 kg Price 1800€ gross, ex works Werdau

Condition: used, Year of construction: 2001, Automatic sharpening machine Vollmer, model Unimat S, max. diameter of circular saws 800 mm, minimum and maximum width of alternative saws 65–200 mm, tooth pitch 12–80 mm, minimum tooth height 5 mm, set per side from 0.3 to 1.5 mm, power 0.55 kW, estimated machine weight 550 kg. Iedjy Swlzjpfx Ab Neat

Condition: used, Automatic sharpening machine Vollmer, model CHC 21 H; minimum and maximum width of bandsaws: 65–200 mm, tooth pitch: 12–80 mm, minimum tooth height: 5 mm, set per side from 0.3 to 1.5 mm, power: 0.55 kW, estimated machine weight: 550 kg, year: 1981, serial no. 364 Iaedpfx Aey Swluob Not

Condition: excellent (used), CATALOGUE NUMBER 7602 Iaedpfx Aey Snyvob Net TECHNICAL SPECIFICATIONS - Sharpening speed: automatic - Cooling - Belt support arms - Grinding wheel size: 120 mm - Motor power: 0.17 kW, 400 V - Dimensions (L/W/H): 500x700x1200 mm - Weight: 120 kg ADVANTAGES – Made in Poland – Unpainted – Belt support arms – Used sharpening machine – Very good condition Net price: 4,900 PLN Net price: 1,160 EUR based on an exchange rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: new, Year of construction: 2026, New automatic knife grinder with tilting magnet mm 2000 long Iodpfx Ajy Smx Dsb Nsat

Condition: ready for operation (used), Projector for optical data capture Iodey Sf Nzspfx Ab Noat Electronic digital displays for measuring tool radius and height HSK63 toolholder for PowerLock tools Desktop PC with operating system PC is fully installed, configured, and tested with dedicated PowerCom software for the POWERMAT system User manual Year 2010

Condition: excellent (used), Year of construction: 1997, Vollmer CAL 300 Iaodpfx Abjy Ryg Ee Nst

Condition: new, Year of construction: 2026, Model: Electrical, Option with swingarm Tooth form: All common tooth forms Saw blade width: 25 - 350 mm (double Side teeth and variable pitch) Teeth:0-60T/min Coolant:150-300 I/min Tooth pitch: 10 - 60 mm Tooth height: 0 - 30 mm Ijdpfx Absy Rq Uas Njat Tooth angle: 0 - 40° Sharpening speed: 0-60 teeth/min Grinding wheel: 300x30mm, 8 - 13mm thick Grinding wheel motor: 3.0 kW E-Motor Water tank volume: 265 liter

Condition: new, Year of construction: 2026, machine/vehicle number: 2026, Wet sharpening machine for Frame Saws Ijdsy Rq T Aepfx Ab Noat

Condition: new, Year of construction: 2026, Model: Mechanical with touch panel Tooth profiles: All common tooth profiles Blade width: Band saws up to 230mm Iedpoy Rq Tvsfx Ab Njat Blade thickness: 0.6 - 6.0 mm Tooth pitch: 0 - 60 mm Tooth height: 0 - 25 mm Clamping angle: 0 - 40°

Condition: new, Year of construction: 2026, Model: Mechanical or CNC with touch panel Circular saw with stellite or alternate set teeth Sharpening in one pass with a large amount of water!! Tooth profiles: All standard tooth profiles Blade diameter: Circular saw blades up to 1000 mm Blade thickness: 0.6 - 6.0 mm Iajdpfsy Rq Tpjx Ab Njt Tooth pitch: 0 - 60 mm Tooth height: 0 - 25 mm Clamping angle: 0 - 40°

Condition: new, Year of construction: 2026, Model: Electrical, Option with swingarm Tooth form: All common tooth forms Ijdpfxey Rq Tis Ab Nsat Saw blade width: 25 - 350 mm (double Side teeth and variable pitch) Teeth:0-60 Z/Pm Coolant:150-300 l/min Tooth pitch: 10 - 60 mm Tooth height: 6 - 30 mm Tooth angle: 0 - 40° Sharpening speed: 6 - 10 teeth/min Grinding wheel: 300x30mm, 8 - 13mm thick Grinding wheel motor: 2,8 kW E-Motor Water tank volume: 165 liter

Condition: used, Year of construction: 1977, functionality: not functional, machine/vehicle number: 50096, Loroch BL65 sharpening machine from 1977 Iaedpfxsy N U Dpe Ab Njt

Condition: good (used), Grinding motor for Reform knife grinding machine 3 kW, 4 HP, 2850 rpm, 7 A, 0.80 cos phi Iedpfx Aoy N Saheb Njat Motor manufacturer: Englert, Fulda

Condition: ready for operation (used), Original Vollmer spare parts for Cana, CnHV, and Cne for Vollmer Cne 100 Guide arm (cast part) 120 Protective cover 150 Grinding head drive motor 172 Three-phase motor 250 Intermediate bearing complete 264 Intermediate lever housing 550 Grinding wheel drive motor 552 Grinding bearing Iaedpfsy N R Udsx Ab Njt 515 Grease press 516 Oil press 450 Halogen light 400 Exhaustor without motor (with motor???) 300 Feed (tooth pitch adjustment) for Vollmer CnHV Machine to be used as a parts donor Complete clamping carriage Intermediate bearing complete Gearbox complete for Vollmer Cana 100 Complete guide arm (refurbished) 300 Complete feed unit 450 Intermediate bearing 458+459 Intermediate lever 500 Gearbox 700 Pump unit 750 Exhaustor 800 Complete cylinder piston 0100 Clamping carriage for frame saws with rack and pinion (pitch as per customer request) 251 Push rod for feed pawl 200 Support arm 206 Guide rail for Vollmer AT Worm gear Feed cam Clamping cam Release cam Tooth profile cams for CNHV (11-...), for Cana/S (28-...), for Cana/e (29-...), for Cana/f (9a/...)

Condition: excellent (used), Knife grinder MVM model PX1000 with tilting magnet mm 1000 long, 5 KW grinding wheel motor Ijdsy N Dt Tspfx Ab Noat

Condition: excellent (used), functionality: fully functional, Very well-maintained sharpening machine for gang saws. Features 3 selectable feed speeds. Equipped with 4 selectable tooth profiles. Extraction system included. Tooth pitch 25 mm or 22 mm. Photos show the original condition. Ready for demonstration. Iodpey N Atxsfx Ab Neat

Condition: good (used), Year of construction: 2001, Grinding of planer knives (conventional and hydro tools, as well as profile knives – profile knives ground based on templates) Machining length: 240 mm Tool diameter: 100–230 mm Grinding wheel diameter: 150–225 mm Grinding wheel width: 2–3–4–10 mm Iajdpjy Nmuyefx Ab Nst Relief angle: 15–35° Side angle: 0–10° Coolant tank: 50 L Total electrical power: 2 kW Spindle diameter: D40 and D50 mm Infinitely variable speed control for grinding wheel: 1000–3000 rpm Accuracy: within 0.005 mm Motorized lateral feed Liquid-cooled system Equipped with profile copying unit Accessories included (grease pump, knife holder, grinding wheel, dressing tool with tracing pin, template holder)

Condition: used, Year of construction: 2010, functionality: fully functional, total length: 4,130 mm, working width: 150 mm, table length: 4,130 mm, table width: 150 mm, We offer this used MVM KX41 automatic sharpening machine with automatic loader, year of construction 2010. Machine is in working condition, but not useful to our production anymore. Table dimensions: 4130x150mm, tiltable (automatic). Automatic loader/unloader. Machine is complete as visible on the pictures Iaodpfx Aey Nl Edjb Not Manufacturer: MVM Model: KX41 Year of construction: 2010 Condition: used Category ID: 151 Type ID: 1363 Machine type: Automatic sharpening machine with loader If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), TOOL SHARPENING MACHINE FOR FULLY-AUTOMATIC SHARPENING OF STRAIGHT KNIVES TECHNICAL DATA MAX. TOOL WIDTH: 330 MM EXTENDED (OPTIONAL): 460 MM WITH POWERLOCK: 322 MM TOOL RADIUS: 100 - 300 MM EXTENDED (OPTIONAL): 140 - 340 MM WITH POWERLOCK: 100 - 250 MM SANDING DISC DIAMETER: 125 - 200 MM SPINDLE RPM: 4600 RPM FREQUENCY CONTROLLED: 1500 - 4600 U/MIN Iaodpfx Aboy Ivbae Nst

Condition: excellent (used), HSS saw grinder SCHMIDT TEMPO model ECE45, 4 axis, diameter up to 630 mm Isdpfjy H Egcox Ab Noat

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 100708, feed length X-axis: 6,300 mm, feed length Y-axis: 250 mm, feed length Z-axis: 200 mm, overall weight: 2,500 kg, saw blade diameter: 700 mm, input voltage: 400 V, saw blade bore: 30 mm, We offer this used H&M HM-Z Automatic Through-Feed Machine, year of manufacture 2008. Machine: HM-Z Type: 4-F Serial number: 100708 Production date: 15-04-2008 Connection voltage: 400 V Power: 19 kW Weight: 2500 kg Air pressure: 6-10 bar Maximum saw blade diameter: 700 mm Minimum saw blade diameter: 600 mm Saw shaft hole diameter: 30 mm Maximum milling cutter diameter: 400 mm Minimum milling cutter diameter: 300 mm Cutter shaft hole diameter: 60 mm Completely overhauled in 2024 by Diba Machinehandel and has hardly been used since, due to an additional business activity. Must go due to lack of space. Infeed section adapted to a working length of 7 meters during the 2024 overhaul. H&M crosscut saw: approx. 19.5 x 4 meters Iedpfx Asy H Dblsb Noat Price is exclusive of dismantling, transport, assembly and accessories, valves, pipes, extraction hoses, and power cables. If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: excellent (used), Automatic straight knife grinder REFORM model AR25 with tilting magnet mm 2500x150, 5,5 kW grinding wheel motor Iaodpjy Hxmvofx Ab Not

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Automatic, electronically controlled sharpener for frame saws. Type GSA. In very good condition. Iaedpfjy E Nkvsx Ab Njt

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Very well-maintained sharpening machine for bandsaws with wet grinding. Blade width from 70 to 400 mm. Blade length from 5.6 to 14 m Tooth pitch from 6 to 75 mm Iajdpfxey Eglws Ab Njt Feed rate freely programmable from 4 to 39 teeth per minute. Suitable for left and right-hand bandsaw blades without adjustment, including double-tooth blades. Feed and grinding head stroke are individually cam-controlled, allowing reduced feed speed at the tooth base. No complex electronics. Tooth counter. Grinding mist extraction. Deflection rollers.