Vedbaek Handel & Industri Aps

Condition: new, Year of construction: 2021, Marel MS2610 Pinbone Remover High-quality pinboning The MS 2610 Pinbone Remover is a lighter version of our well-known standard pinboner, the MS 2612. It is designed according to the same principles, ensuring high-quality pinbone removal, and it can operate at the same speed as the MS 2612 to deliver maximum capacity. Manual adjustments Three pre-set speeds are available, allowing the pinbone roller to adapt to the varying condition of the fish. The pressure of the pinbone heads can be easily adjusted using a weight bar. The MS 2610 is available as a single-lane and dual-lane machine. Fast and accurate The MS 2610’s unique combination of accuracy and speed results in high yield and output, with the best pinboning quality often achieved at a belt speed of 4-5 m/min. Up to 18 fillets per minute, per lane Three pre-set speeds for the pinbone roller Quick-release system on conveyors Manufacturer: Marel Model: MS2610.10 Year: 2021 (new) Production hours: 0 Gsdez Arimjpfx Adtoug Capacity: Up to 18 fillets/minute * Power: 0.4kW Machine dimensions L x W x H: 1,650 x 710 x 1,900 mm Machine weight: 180 kg.

Condition: used, Fish fillet washer Make: Carnitech Godpfxozzd Ewe Adtjug Model: 1635.20 Spray bars top and bottom

Condition: excellent (used), Year of construction: 2009, Salmon Slicer Horizontal / Long Slice Gujdpfx Aozzdmbjdtog Make: Marel Model: HS240 2009

Condition: used, Consisting of: “GEA-CFS” battering machine Type ER 900 all stainless steel belt width 900 mm mobile mesh width 5 mm adjustable speed with air knives with batter pump outside dimensions (l x w x h) : ± 1.700 x 1.500 x 1.700 mm + “GEA-CFS” breading line Type PR 900 2,83 kW suitable for standard belt width 900 mm mobile adjustable speed Guedpszza Aljfx Adteg adjustable working height with air knive outside dimensions (l x w x h) : ± 2.800 x 1.200 x 2.100 mm

Condition: excellent (used), Year of construction: 2016, Marel 2630 Salmon Filleting Machine If you’re processing salmon or trout, the Carnitech CT 2630 will give you a competitive advantage. The dual knife system – band and circular – ensures a clean, precise cut every time. This results in a higher yield, less waste, and a better-quality fillet. It is designed to handle fish ranging from 2 to 7 kg, processing up to 20 fish per minute without compromising cut quality. The integrated compressor and low water consumption make it efficient and hygienic. Add the circular knife grinder accessory to maintain optimal performance. This machine is all about fast, clean, and consistent output. Unique cutting principle Combination of circular knives and band knives Significantly improved yield Electrical panel and compressor with dryer are fully integrated Easy access for cleaning Manufacturer: Mare Model: CT 2630 Year: 2016 Fish size: 2-7 kg Capacity: Up to 20 fish/minute Electricity: 3x400V Power consumption: 4.0 kW Machine dimensions L x W x H: 2,000 x 850 x 1,650 mm Machine weight: 675 kg Gujdpfx Adjzyk Ametjg

Condition: excellent (used), HERFRAGA SM-110 Automatic Packing Machine – Canning Industry The HERFRAGA SM-110 automatic packing machine is designed to automate the placement and packaging of products into containers within industrial processing and canning lines. Manufactured by HERFRAGA, a specialist in machinery for the canning industry, the SM-110 incorporates a continuous feeding and transport system that manages the product during the packaging operation, reducing manual handling and facilitating a regular flow to the subsequent production stages. Its industrial construction, primarily in stainless steel, allows it to be integrated into automatic processing and packaging lines. MAIN FEATURES -Manufacturer: HERFRAGA -Model: SM-110 -Type: Automatic packing machine -Application: packaging of products into containers -Automatic and continuous operation -Product feeding system -Controlled transport during the process -Guiding and positioning system -Integrated conveyor -Motorized drives -Construction primarily in stainless steel -Robust design for industrial use -Access to mechanisms for cleaning and maintenance -Designed for the canning industry -Integrable into existing production lines PROCESS The HERFRAGA SM-110 is designed to automate the packaging operation within a canning industrial line. The product is fed and transported in a controlled manner to the work area, where the machine's various mechanisms perform the placement and packaging operation into the container. Once this phase is completed, the containers can continue directly to subsequent operations such as filling with liquid, sealing, and heat treatment. It can be integrated with: -Product feeding systems -Container conveyors -Preparation and cutting equipment -Liquid, oil, or brine dosing systems -Can sealers -Container washers -Inspection systems -Autoclaves and sterilizers -Labeling machines -End-of-line equipment APPLICATIONS Particularly suitable for canning industries and food processing plants that need to automate the packaging and placement of products into containers. Gujdpfxjzxchrs Adtog The HERFRAGA SM-110 can operate as a stand-alone unit within the process or be integrated into a complete automatic line for the production and packaging of canned goods, reducing manual operations and improving the continuity between the different production phases. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: like new (used), HERMASA TUNIPACK-500 Automatic Packaging Machine The HERMASA TUNIPACK-500 is an automatic packaging machine designed for the automatic placement and packaging of products into containers within industrial food processing and preservation lines. Manufactured by HERMASA, a specialist in machinery for the canning industry, the TUNIPACK-500 is designed to automate the product loading and distribution phase into the container, reducing manual handling and providing a continuous and uniform process. Its industrial-grade construction in stainless steel, combined with the automatic feeding and control system, allows for integration into highly automated production lines. MAIN FEATURES -Manufacturer: HERMASA -Model: TUNIPACK-500 -Type: Automatic packaging machine -Automatic feeding and packaging system -Controlled product handling -Continuous industrial operation -Robust stainless steel construction -Integrated transport system -Control panel with HMI screen -Protections and safety systems -Designed to reduce manual handling -Integrable into existing canning lines -Hygienic construction for the food industry APPLICATION The HERMASA TUNIPACK-500 is designed to automate the packaging operation within an industrial canning line. The product is fed into the machine and managed automatically during the packaging process, facilitating its correct introduction and arrangement into the containers before continuing to the next stages of production. It can be integrated with: Product feeding systems Container conveyors Product preparation equipment Dosers Can sealing machines Inspection systems Container washers Autoclaves and sterilization systems Labeling machines Complete automatic canning lines APPLICATIONS Guedpfxszw A She Adteg Particularly suitable for canning industries and fish processors looking to automate the packaging process and reduce manual operations on the production line. The HERMASA TUNIPACK-500 provides an industrial solution to achieve a continuous flow of product and facilitate its subsequent closing and processing. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Year of construction: 2013, Twelve machines for food and meat processing are available, including four metal detectors, two derinding machines and one weigh-price labeler, one knife holder washing machine, one separator, one slicer, one meat band saw and one checkweigher. 1) Bizerba GS weigh-price labeler, version: automatic weighing instrument for individual weighing with price printing device. 2) Itec 22560-EL knife holder washing machine, year of manufacture: 2009, conveyor speed: approx. 2.6m/min, cleaning capacity: approx. 14knife holders/min, water tank volume: approx. 270l, max. cleaning water temperature: approx. 43°C, final rinse temperature: approx. 82°C. 3) 2 × Pulsotronic M-Pulse2 InFlex65 compact metal detectors, year of manufacture: 2013, suitable for metal detection in liquid and paste-like products, free product pipe diameter: approx. 57mm. 4) Pulsotronic M-Pulse 2 InFlex 65-3 metal detector, year of manufacture: 2018, suitable for filling machines as well as liquid and paste-like products, product pipe height: approx. 950mm-1250mm, free product pipe diameter: approx. 57mm. 5) Mettler Toledo Safeline metal detector. 6) Cri-Man SM300/50 separator for solid-liquid separation, design: screw press separator, screw speed: approx. 33rpm, screen opening: 0.5mm, throughput: approx. 37m³/h, machine weight: approx. 465kg. 7) Weber ASA 560 derinding machine, year of manufacture: 2003, working width: approx. 560mm. 8) Maja ESM/3550 derinding machine, year of manufacture: 2004, working width: approx. 554mm, cutting speed: approx. 22m/min, machine dimensions X/Y/Z: approx. 986mm/696mm/988mm, weight: approx. 170kg. 9) Bizerba VS 12 F slicer, blade diameter: 350mm, max. slice thickness: 24mm, max. round product diameter: approx. 270mm, max. rectangular product dimensions: approx. 315mm/245mm, blade speed: approx. 266rpm, machine dimensions X/Y/Z: approx. 860mm/770mm/480mm, weight: approx. 48kg. 10) Kolbe meat band saw. 11) Liebel LWS1400 checkweigher, weighing range: approx. 100g-6000g. An on-site inspection is possible. Gsdozwgiqjpfx Adtsug

Condition: ready for operation (used), Year of construction: 2011, Marel 2630 Salmon Filleting Machine If you’re processing salmon or trout, the Carnitech CT 2630 will give you a competitive advantage. The dual knife system – band and circular – ensures a clean, precise cut every time. This results in a higher yield, less waste, and a better-quality fillet. It’s designed to handle fish ranging from 2 to 7 kg, processing up to 20 fish per minute without compromising cut quality. The integrated compressor and low water usage make it efficient and hygienic. Add the circular knife grinder accessory to maintain optimal performance. This machine is all about fast, clean, and consistent output. Unique cutting principle Gusdpfxezu Rfke Adteg Combination of circular knives and band knives Significantly improved yield Electrical panel and compressor with dryer are fully integrated Easy access for cleaning Manufacturer: Marel Model: CT 2630 Year: 2011 Fish size: 2-7 kg Capacity: Up to 20 fish/minute Electricity: 3x400V Power consumption: 4.0 kW Machine dimensions L x W x H: 2,000 x 850 x 1,650 mm Machine weight: 675 kg

Condition: used, Year of construction: 2014, Marel MS2730 Filleting Machine with Back Bone Trim High-performance automatic salmon filleting machine Available from August / September. This Marel MS2730 Filleting Machine is equipped with an automatic Back Bone Trim system, delivering excellent fillet yield and consistent product quality. The machine has been professionally maintained by Marel on an annual basis and is currently in good working condition. (Complete overhaul in 2018). Designed for medium to high-capacity fish processing operations, the MS2730 automatically adjusts to different fish sizes, ensuring maximum yield while reducing manual labor. Key Features - Automatic salmon filleting machine - Equipped with Back Bone Trim - High fillet yield and excellent cutting accuracy - Automatic adjustment to varying fish sizes - User-friendly touchscreen control - Hygienic stainless-steel construction - Easy access for cleaning and maintenance - Compact footprint - Annual maintenance carried out by Marel - Good working condition Technical Specifications - Manufacturer: Marel - Model: MS2730 - Capacity: Up to 25 fish per minute - Fish size: Approximately 1.5 – 8 kg - Power supply: 3 × 400 V + N + PE (50 Hz) - Power consumption: Approx. 5.5–7.0 kW (depending on configuration) - Water consumption: Approx. 15 L/min - Compressed air: Approx. 230–250 L/min at 6–8 bar - Dimensions (L × W × H): Approx. 3,150 × 1,035 × 1,980 mm - Weight: Approx. 1,450 kg (configuration dependent) Condition The machine has been serviced annually by Marel and remains in good operational condition. It is still installed and can be inspected under power by appointment. Availability: August / September. For additional information, pricing, or to arrange an inspection, please contact us. Gsdpfx Aozl Sydjdteug * Manufacturer: Marel * Model: MS2730 * Fish size: Approximately1.5 – 8 kg * Power consumption: Approx.5.5–7.0 kW(depending on configuration) * Weight: Approx.1,450 kg(configuration dependent)

Condition: excellent (used), functionality: fully functional, The FDS 3000-1 Trio is an automatic fish skinning machine designed for the gentle skinning of soft, trimmed whitefish fillets and fish portions of uneven thickness. This brand’s machine has been used for years in fish processing plants around the world as a proven solution where high yield and minimal damage to the raw material are essential. Technical Specifications Manufacturer: TRIO Model: FDS 3000-1 Capacity: 40–120 fillets/min (depending on fillet size) Skinning depth: 0–10 mm Feeding method: manual Skinning method: freezing the fillet on a chilled drum; operates without stretching the skin or flesh Supported species: including hake, pollock, blue whiting, and whitefish of varying thicknesses How does the Trio FDS 3000-1 skinning machine work? The operating principle of the FDS 3000-1 is based on a unique method of “freezing” the fillet on a chilled drum. The fillet is manually fed onto the surface of the rotating drum, where—thanks to the low temperature, the force of gravity, and light pressure—it is stabilized in a flat position without compressing or excessively straining the tissue. Only in this position does the knife remove the skin, leaving as much valuable meat as possible. This method allows for shallow, controlled skinning—with a cutting depth ranging from 0 to 10 mm—which results in less discoloration, fewer skin residues on the fillet, and higher end-product yield compared to the brand’s traditional, older models. Key Advantages of the Trio FDS 3000-1 The FDS 3000-1 skinner is particularly effective when the raw material is delicate or has uneven thickness—the gentle skinning method on a cold drum reduces the risk of fillet damage and preserves its structure even when processing thawed, previously frozen products. The machine’s capacity, ranging from 40 to 120 fillets per minute depending on the size of the raw material, allows the operating speed to be adjusted to the characteristics of a specific production line. The machine’s design ensures stable, consistent skinning quality regardless of the fillet’s shape and thickness, which reduces the need for manual adjustments and speeds up subsequent processing stages. The simple, manual method of feeding fillets means that operating the machine does not require extensive staff training. Applications and supported fish species The Trio FDS 3000-1 is used for skinning soft white fish fillets and portions of uneven thickness, including previously frozen and thawed raw material. The machine is well-suited for processing species such as hake, pollock, blue whiting, and other white fish that require gentle handling during processing. Thanks to its flexibility in skinning depth, the FDS 3000-1 is suitable both for producing fillets intended for further processing (e.g., breading, freezing, smoking) and for production lines focused on maximizing the yield of high-value raw material. At BMG Trade, we specialize in the sale of machinery for the food industry, including professional fish-processing equipment such as Trio skinning machines. If you are looking for a Trio FDS 3000-1 skinning machine—whether new or a proven, used machine in good working condition—please contact us. We will help you select the right model for your product range and production scale, and we will also advise you on transportation, service, and commissioning the machine at your facility. Contact us to find out about current availability and pricing for the Trio FDS 3000-1. Guodjzlhihepfx Adtsg

Condition: excellent (used), Year of construction: 2022, operating hours: 5,098 h, Baader 581 Pro Filleting Machine The BAADER 581 Pro is one of the latest innovations in the filleting section from BAADER. It represents probably the most powerful and advanced filleting machine in the world. These in-depth studies resulted in the development of the BAADER 581 Pro’s most innovative optional feature: the dynamic back knife. The optional dynamic back knife offers outstanding possibilities for increasing the yield of the fillet and makes BAADER 581 Pro a yield winner. Depending on the fish's anatomy, the knives are automatically adapting to the upper back area of every single salmonid leaving as little flesh on the frame as a hand filleter would. Very narrow in the tail section but opening up to the wider backbones in the neck area. The result changes the common understanding of yield expectations for machine filleting. The new layout of the BAADER 581 Pro has a 20% smaller footprint compared to its predecessor by streamlining the housing. The recently designed housing also reduces processing noise for a quieter production atmosphere. It features individual fish measurement, offering operational flexibility for a wide range of fish species and different kinds of conditions. High flexibility to different species and conditions Adaptable recipe management system allows for changes during operation Individual fish measurement High operational flexibility for different fish species and conditions Optimal fillet quality Computer controlled active cutting tools Smooth surface as a result of reduced fillet stress during processing No gaping Working range without belly trim (approx.):  Salmon (HoG): 2 - 7 kg Sea Trout (HoG) : 1.8 - 5 kg Sea Trout (HoG): 1.- 4 kg * Working range with belly trim (approx.):  Salmon (HoG): 2 - 5.5 kg Sea Trout (HoG) : 1.8 - 5 kg Sea Trout (HoG): 1.- 4 kg * Other species on request, like: Wild caught coho (H&G): 2 - 4 kg Wild caught sockeye (H&G): 2 - 4 kg Gujdpfx Aezktd Isdtog Manufacturer: Baader Model: 581 Pro Year: 2022 Production hours: 5.098 hours Capacity: Up to 25 fish/min. Species: Salmon / Coho / Sockeye / Trout / Tuna / Similar Power: 400V / 50Hz / 13kW Air: 6 bar / 50l/min. Machine dimensions LxWxH: 5.566x2.795x2.523 mm Machine weight: 3.200 kg.

Condition: excellent (used), Year of construction: 2013, We offer a used KROMA GUTMASTER 1200 mackerel gutting and injecting line from 2013. This industrial processing line is designed for the automatic gutting, cleaning, waste extraction, and brine injection of mackerel in fish processing plants. The machine is suitable for fish weighing 200–500 g and combines several operations in one continuous workflow. The fish is manually placed in special conveyor pockets, head-first and belly-up. As it moves through the line, the machine measures the fish and automatically adjusts the knives to its size. The system opens the belly, separates the gills, removes the entrails using the VACMASTER 200 vacuum system, cleans the inside of the fish, removes kidney blood, and then transfers the product to the brine injection section. The line is equipped with the BRINEMASTER automatic brining module, located directly after the cleaning section. A special injection head with 50 needles, each 2 mm in diameter, injects brine into the fish. After brining, the product is transported by conveyor to an inspection table or directly into containers. The KROMA GUTMASTER 1200 is made of acid-resistant materials and AISI 304 stainless steel, ensuring durability, hygiene, and resistance to demanding production environments. The machine is also equipped with CIP and CWS cleaning systems, helping to reduce cleaning time and improve sanitary working conditions. If there is no fish in a conveyor pocket, the working units are automatically deactivated, which reduces wear and energy consumption. Technical specifications: Manufacturer: KROMA Model: GUTMASTER 1200 Year of manufacture: 2013 Application: mackerel gutting, cleaning, and brine injection Fish size: 200–500 g Capacity without brine injection: up to 50 pcs/min Capacity with brine injection: up to 35 pcs/min Total power: 8 kW Control: microprocessor-based PLC Vacmaster 200: automatic vacuum gut-removal system Brinemaster: 50 needles, 2 mm diameter Outfeed conveyor: yes CWS cleaning system: yes CIP cleaning system: yes Basic spare parts kit: included in the price Operating staff: 2–3 people Weight: approx. 1000 kg Dimensions: 5100 / 6100 mm with conveyor x 600 x 1600 mm Main advantages: automatic gutting, cleaning, and brine injection in one line, Gedpfszkizvox Adteug high capacity of up to 50 fish/min without brining and up to 35 fish/min with brining, suitable for mackerel weighing 200–500 g, VACMASTER 200 vacuum system for entrail removal, BRINEMASTER brine injector with 50 needles, stainless steel and acid-resistant construction, CIP and CWS cleaning systems, PLC control, basic spare parts included in the machine price.

Condition: used, Fish Filleting and Heading Machine Make: VMK Guodpezi Tl Njfx Adtsg Model: 18 + 181 With spare parts Working order, as back from factory

Condition: excellent (used), Year of construction: 2016, Fish / Sardine procesing line SIA "PERUZA " Type of fish - Sardine Fish length - 140/180 mm Fish per kg - 44/27 # Fish condition Fresh; defrosted (not recommended) Equipment characteristics Productivity (for one autonobbing head) - Up to 200 fish/minute Connections -Electricity Voltage - 400 V Phase - count 3 - Frequency - 50/60 Hz Power (for one autonobbing line) - 8 kW Power (for one vacuum system) - 7.5 kW Power (for Nobbing machine for rigor mortis fish) - 0.75 kW Power (for logistic conveyour system) -5 kW Water Pressure >3 bar Other data : Humidity resistance IP 65 - Materials used - Stainless steel AISI 304, Gsdpfx Aezhibkedtjug AISI 316, Plastic ERTALON 6SA, POLYURETHAN, PE HD 500 Environment - Indoors (temp. +10....+35 -

Condition: refurbished (used), Year of construction: 2008, operating hours: 31 h, functionality: fully functional, machine/vehicle number: F-189-S-031, A used, ready to work, Fiskvelar, Filleting machine. Build on a Baader-189 platform. Size. Small. Fish from 0.6-2 kg. Fish form dependence Guedpfx Aszfyaljdteg Well maintained Machine. Had new Controlpanel from Curio, installed couple years back. Fully serviced. Machine is located in Norway but can be delivered to Netherlands or to Hull, UK included in the price. Comes with new set of circular knifes and Two days training included, when installed.

Condition: used, Year of construction: 2003, functionality: fully functional, Well-maintained slicer. Godozfizxepfx Adteug

Condition: used, Year of construction: 2017, operating hours: 2,500 h, functionality: fully functional, Equipment: CE marking, KROMA trout filleting line – Year 2017 Sale of a complete KROMA filleting line for trout weighing 300 to 600 g. Configuration: • Infeed conveyor with loading hopper • Headmaster: head and tail cutting with automatic transfer to the filleting machine • Filetmaster: gutting and filleting (single fillets or butterfly fillets) • Two waste discharge conveyors • Disc sharpener Gusdpfjzdaftex Adtog • Set of spare parts Features: • Year: 2017 • Approximately 2,500 operating hours • Average use: approximately 6 hours per week • New purchase price: €153,000 excluding VAT The line is currently installed and can be viewed by appointment. Last operated in February 2026. Machine sold complete with its accessories and available parts. Dismantling, loading, and transport to be arranged by the buyer or their service provider. Photos, videos, and additional information available upon request. Price: €49,000 excluding VAT

Condition: used, Year of construction: 2012, Trio FDS3000 skinner for up to 150 cod fillets a minute. 460mm wide conveyor. Gjdozawqrepfx Adtoug

Condition: good (used), Year of construction: 2003, functionality: fully functional, Used Babbini PB 32 FS Beet Pulp Press Manufacturer: Babbini (Italy) Model: P 32 FS Year: 2003 Type: Horizontal twin-screw pulp press Capacity: Up to approximately 3,200 metric tons per day of beet sugar pulp Gujdpfey Uvr Eex Adtsg

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Fully functional twin screw press for fishmeal and fishoil industry. Gsdpfx Asy Uax Njdtjug The machine is in very good Working condition.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, REF: MM6419 1 x Carnitech twin-lane pin-bone removing and packing line. This machine is designed for removing pin-bones ensure a high product quality and helps to achieve a maximum yield at shorter time. Head end first and skin side down, the salmon fillets are conveyed to the pin-bone head on a pvc belt. Carnitech pin-bone removers treat the fillets very gently. Guedpfx Adsy Swi Hjtjg This system is suitable for processing both salmon and trout. Manufacturer - Carnitech A/S. Type - CT 2612. Pin-Boner Date of manufacture - 2000 (refurbished approx 2 years ago). Packing Line Date of manufacture - 2023/24. Capacity / Output - up to 36 fillets / minute (was only being run at 10 fillers / minute). Size of fillet - between 0.5 kg up to 4 kg. Video available on request.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, 1 x Tsunezawa Group automatic filleting machine that can be operated by 1 person. This is a specialised, high-efficiency filleting machine designed for salmon processing, specifically to remove the belly bones while producing a three-piece fillet (three-way filleting). Manufacturer - Tsunezawa Group Co., Ltd. Model - TAF-BG Filleting Machine. Date of manufacture – 2019. Throughput – 20 to 30 fish / minute, depending on fish size. Processing capability – can handle fresh salmon and thawed salmon down to -4C. Gjdoy Rimzopfx Adteug Electrical requirements – 400 V / 50 hz / 3 phase. Power consumption – 3.45 kW. Overall dimensions - 2300mm long x 1550mm wide x 1800mm high. Weight – 1,000 kg (approx.). Condition – Very good - last used for production in summer 2025. Supplied with User Manual and spare knives.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: PA12704, 110610702, PA12707, mobility: mobile, Badeer Fish Grading Machine – full documentation available in both Polish and English. The onboard computer operates on the MES - B'Logic software platform. It includes two modules: B'Logic Grading and a label design software B'Logic. The set includes: - CAB label printer - Feed hopper - Acceleration conveyor - Weighing machine - Sorting conveyor - PC computer The computer located next to the label printer at the machine is touchscreen. The main computer for setting product specifications (for the currently processed product) does not need to be positioned near the machine. Specification: - 100–120 fish per minute - Maximum fish size: Length – 350 mm, Width – 220 mm - Operating speed adjustable by user (as shown in the video) - Airborne noise: < 70 dB Machine dimensions: Grading section: Godoy Hiyaspfx Adtoug Height: 1.3 m, Length: 4.417 m, Width: 1.050 m Conveyor belt width: 60.8 cm (S 800 seamless belt) Power consumption: 0.37 kW Steel quality: AISI 304 Motor: Worm gear drive Feed hopper: Height: 1.87 m, Length: 3.66 m, Width: 1.5 m Conveyor belt width: 45.6 cm Drum motor Power consumption: 0.37 kW Dynamic weigher: Belt width: 250/350 mm Product weight: up to 1 kg (possible calibration) Motor power: 0.18 kW Speed: 0.25 mm/s – 2.0 mm/s

Condition: good (used), Compact coating line - batter dip, pre dust, batter enrober, crumber - all 400mm in to 350mm wide fryer. Has come from a small factory which was set up in 2020 and closed this week 25th March 2026. The factory was producing small products like pasta and chillies filled with cream cheese which was then coated and fried. Video to be added shortly. All other machinery also available including Vemag multi head filler and several blast freezers. Gusdpfx Adeyxfmyjtjg