Solido Wood House Srl

Condition: used, Work spindles: Number of shafts: Typically 3 tool shafts. Spindle length: 320 mm. Spindle diameter: 50 mm. Maximum tool diameter: Up to 220 mm. Dkedpfx Aeyzrdwjhuok

Year of construction: 2018, condition: ready for operation (used), Dust extraction and filtration system manufactured in 2018. This Nawara RUBIN 2030 is designed for the extraction of dry dust and wood chips, making it suitable for woodworking and industrial dust collection. It features a stationary modular filter system and a warm air recovery system for continuous operation. If you are looking to get high-quality dust collection capabilities, consider the Nawara RUBIN 2030 machine we have for sale. Contact us for further details. • Application: • Designed for extraction of dry dust and wood chips • Suitable for woodworking and industrial dust collection • Performance: • Capacity: approx. 30,000 m³/h • System features: • Stationary modular filter system • Warm air recovery system (summer/winter mode with adjustable flap) • Designed for continuous operation • Compliance: • EU Machinery Directive 2006/42/EC • ATEX Directive 2014/34/EU (for potentially explosive atmospheres) • Meets relevant Polish machinery safety regulations • Airlock / discharge system: • Type: SL 1400 EX • Length: 1400 mm • Height: 360 mm • Connection frame (top/bottom): 1490 × 420 mm • Drive: direct drive with elastic coupling (Rotex 38) • Gear motor: SEW R47 DRN80MK4 (option: DRN90S4) • Speed: 15 rpm (option: 29 rpm) • Overall dimensions (airlock unit): 2000 × 420 × 360 mm (L × W × H) • Electrical data: • Power supply: 380 V / 50 Hz • Scope/installation: • Complete external filter system included • Note: Dksdpfx Ajyzp A Dshujk • The technical data and descriptions are copied from the order confirmation at the time. Information is for informational purposes only and not binding. Additional equipment • Internal factory piping available; included but subject to separate negotiation.

Condition: used, functionality: fully functional, Price with dismantling. Drysorter with control system Mitsubishi A2. Drysorter capacity 80 pc/min after rebuild 2021 new control system Siemens S7 1500, ABB580 frequency converters and Finscan 2019 automatic Dkjdpfoyzhvvex Ahujk sorter. Drysorter equipped with Dynagrade 2015 (updated 2020).

Condition: used, functionality: fully functional, Wet board sorting line 27 bins. Price with dismantling. Dedpfx Aeyzhnxjhujkk Control system Siemens S7 400 and Rema 9050 Stick handling/robot (ALMAB) with control system Mitsubishi A2n.

Condition: excellent (used), Ayen Alomat AL 200, 2 units. Very good condition. Dkodpfeyzhcpox Ahusk

Year of construction: 2020, condition: like new (used), Womatec machines for woodworking and the brush industry. Model Linear 2.0, year of manufacture 2020. Djdpfeyzg D Eox Ahuekk

Condition: excellent (used), 4 kW motor, 4 knives, table length 254 cm, table width 52 cm Dsdpeyy Stcjfx Ahujkk

Condition: used, functionality: fully functional, Band Saw Blade Sharpener OSAMA Specification: • Condition – used, after inspection • Manufacturer – OSAMA • Motors with 0.75 kW power (3 phase) • Grinding angle adjustment from 0 to 15 degrees • Original paintwork • Body dimensions – 50 x 50 x 130 cm (width x length x height) Additional information: • The machine is in good technical condition, ready for immediate use • The presented photos show the actual condition of the item for sale • Possibility to power on and test the machine on site • The price listed in the auction does not include VAT or transport costs Financing & Transport: • We organize transport via MDD fleet, courier companies, or external carriers Dkodpfx Aheyy Nqxjuok • Financing options available in the form of leasing or lease credit

Year of construction: 2004, condition: used, functionality: fully functional, Price including with dismantling. Excellent condition. Dedeyyz Euspfx Ahuekk Included in the set infeed centering system with Cambio 66 and outfeed.

Condition: excellent (used), For sale: dowel inserting machine from Ganner in very good condition. Djdpfxeyyahne Ahujkk

Year of construction: 1997, condition: used, We offer this used dowel drilling machine P. BACCI, year of manufacture 1997. Model: Serial number: 2826 Year of manufacture: 1997 Voltage: 380 V Dkodpfx Ahoyx S Uksujk Frequency: 50 Hz Power: kW Weight: 370 kg If you have any questions or require further information, please do not hesitate to send us a message or give us a call.

Year of construction: 1997, condition: used, functionality: fully functional, We are offering this used contouring machine P. BACCI FC8-2500, year of manufacture 1997. Manufacturer: P. BACCI Model/Type: FC 8-2500 Serial number: 1346 Year of manufacture: 1997 Voltage: 380 V Frequency: 50 Hz Power: 30.5 kW Weight: 5100 kg If you have any questions or require further information, please do not hesitate to send us a message or call us. Dodpfxsyx S Sco Ahujkk

Condition: used, Top and bottom brushing machine, working width 2200 mm Dkodpfxsyx H T Io Ahuek

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, workpiece length (max.): 2,500 mm, TECHNICAL DETAILS Dkedpfx Ahjyxnapjuok Panel length min.: 300 mm Panel length max.: 2,500 mm Panel return system for edge banding machine: Left Panel ejection: via air nozzle table The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7877

Condition: used, machine/vehicle number: 008184, X axis working area: 8185 mm Y axis working area: 1550 mm Dksdpfjyxmv Njx Ahusk Working Table: Pod and Rail Main Electrospindle power: 13 KW Number of controlled axes: 5 axes Total number of tool changer positions: 22

Condition: used, machine/vehicle number: 008491, X axis working area: 2500 mm Y axis working area: 1300 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Dkjdoyxmvvopfx Ahuek Number of controlled axes: 5 axes Total number of drilling spindles: 0 Total number of tool changer positions: 24

Condition: used, machine/vehicle number: 008444, Position 1: Panel Feeding and Loading PAUL - LOGTECH-K 34 G - RC 105 Position 2: Multi-Blade Panel Saws PAUL - LOGTECH-K 34 G - RC 105 Dkodpfx Asyxctkshuok Position 3: Panel Stacking and Offloading PAUL - LOGTECH-K 34 G - RC 105

Condition: used, Technical specifications Milling machine Lisy-Dvorak (CZ) Motors: 4 kW / 7.5 kW Rotary table Power supply: 380 V Milling machine dimensions: Length: 2,000 mm Width: 2,000 mm Height: 1,450 mm HIKEV Mernokiroda Press (HU) Width of machined material: 80 mm Height of machined material: 80 mm Length of machined material: 6,000 mm Dsdpfx Aheyw N I Eeuekk Hydraulic-pneumatic press Automatic operation – loading and unloading Pneumatic/hydraulic control Press dimensions: Length: 7,600 mm Width: 2,300 mm Height: 1,500 mm

Condition: used, functionality: fully functional, Inciing device for direct mounting on a round bar milling machine, featuring 16 support arms for the incising blades. The arms are pneumatically interconnected in groups to accommodate different diameters. Maximum incising diameter: 160 mm. The incising blades are pressed into the wood by pneumatic cylinders. Dkodpjywfdcofx Ahuek

Condition: used, machine/vehicle number: 008471, X axis working area: 6360 mm Y axis working area: 1680 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Dksdpfx Ahoywaf Uousk Total number of drilling spindles: 10 Total number of tool changer positions: 36

Condition: used, machine/vehicle number: 008473, X axis working area: 4900 mm Y axis working area: 1680 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Dodpfx Ajywaf Iohuekk Number of controlled axes: 5 axes Total number of drilling spindles: 10 Total number of tool changer positions: 36

Condition: used, machine/vehicle number: 008469, X axis working area: 3050 mm Y axis working area: 850 mm Dkjdpfxeywafuj Ahusk Number of controlled axes: 3 axes Total number of drilling spindles: 19 Total number of tool changer positions: 4

Condition: used, machine/vehicle number: 008401, Position 1: Bottom Sanders DMC-UNISAND K-I Dkjdpfx Ahoywafnsusk Position 2: Top Sanders DMC-UNISAND K-I

Condition: used, machine/vehicle number: 008414, X axis working area: 3140 mm Y axis working area: 1500 mm Dkodpfx Asywafhjhuok Working Table: Pod and Rail Main Electrospindle power: 13 KW Number of controlled axes: 5 axes Total number of tool changer positions: 13

Condition: used, machine/vehicle number: 008382, Max width workable: 800 mm Max length workable: 2800 mm Max height workable: 1320 mm Dkjdpfjywadwex Ahusk Max feed speed: 40 m/min