Egmix Baltic OÜ
Egmix Baltic OÜ from Tartumaa, Tartu,
Metal processing mashines reseller in Baltic area.
Mr Egert Tarkus
Roopa 19A
50110 Tartumaa, Tartu,
Estonia
Current offers from similar dealers
Listing

7,999 km
Automatic straightening press
KBHASPH-16-500
KBHASPH-16-500
Call
Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, total width: 700 mm, pressing force: 16 t, working height: 1,050 mm, center height: 1,050 mm, Automatic straightening system, mechanically overhauled, fitted with new SIMATIC S7-1500 control and Drive Controller CPU 1504D TF. Max. centre distance 500 mm, straightening force 16 t, straightening stroke 20 mm, idle stroke 95 mm, working height 1050 mm, power rating 10 kVA, average consumption 1.3 kW.
Fgsdpfx Afsxldiqopoh
Option: The machine can be equipped with a lifting beam conveyor (through the machine), as well as infeed/outfeed belts according to customer requirements, and also with a safety fence.
Currently, the machine is equipped with 1 straightening station; expansion is possible.
Listing

7,973 km
Straightening press
KUNKELDZ 160
KUNKELDZ 160
Call
Condition: used, Year of construction: 2011, Horizontal Straightening Press
Pressure: 160 t
Fodjxgg Npjpfx Afpjgh
Total power requirement: 18.5 kW
Machine weight approx.: 13.5 t
Listing

7,743 km
Hydraulic forming press for shipyard bottoms
van de GRAAFhydr. Umformpresse 500 to
van de GRAAFhydr. Umformpresse 500 to
Call
Condition: excellent (used), Technical specifications:
Pressing force: 500 tons
Distance between uprights: 4,300 mm
Dimensions (length x width x height): approx. 5,100 x 900 x 4,300 / 5,600 mm
For transport (in two parts):
Dimensions: 2 x 5,100 x 900 x 3,050 mm
Weight: 1x 15,700 kg – 1x 13,200 kg (total 28,900 kg)
The seller assumes no liability for typographical or data transmission errors. The machine’s appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.
Fsdpfxjxgbllj Afpegh
Listing

7,685 km
Straightening- and Bending Machine
GERD WOLFFHP 60 - Horizontal
GERD WOLFFHP 60 - Horizontal
Call
Condition: new, pressure 60 t
stroke max. 300 mm
bending capacity max. - flat 300 x 16 mm
working feed 10 mm/sec
Control NC
Height of Toolings 300 mm
total power requirement 5,5 kW
weight of the machine ca. 1530 kg
The Gerd Wolff HP 60 is a hydraulic horizontal press machine with many
many possible combinations.
Whether it is the bending of tubes, the punching of profiles or the cutting of
sheet metal - with the right accessories, the HP 60 is a multifunctional
machine among all presses.
Fodexfb Ikepfx Afpegh
Standard accessories
- ergonomic tool clamping table
- easy tool change
- hydraulic speed and pressure adjustment
- easily adjustable back gauge
- induction hardened support pins
- NC control
Highlights
- control panel with digital display
- Easy tool change
- hardened support pins
- hydraulic speed regulation
The HP 60 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik",
by a renowned manufacturer from Türkiye.
The pictures are for orientation only and are not true-to-scale representations
of the machine.
Listing

7,617 km
Bending machine horizontal
BERNARDOWB 200 S
BERNARDOWB 200 S
Call
Condition: new, bending radius min. 190 mm
square edge steel 20 x 20 mm
flat steel 100 x 7 mm
round bar steel 22,0 mm
L-beam 100 x 10 mm
range L-W-H 900 x 430 x 310 mm
weight of the machine ca. 33.0 kg.
properties
- For precise cold and hot bending of flat, round and square steels
- Stable construction for screwing onto the workbench
- Infinitely adjustable bending stop
- With eccentric quick release for efficient work
- Readable bending angle up to 120 °
- High repeat accuracy thanks to the bending angle stop
- Ideal for repair shops and locksmiths
Fgodpsxcuyhsfx Afpeh
scope of delivery
- Bending plate
- Stepless angle stop
- Terminal block with eccentric clamp
- Material stop
Listing

7,617 km
Bending machine horizontal
BERNARDOWB 100
BERNARDOWB 100
Call
Condition: new, square edge steel 16 x 16 mm
flat steel 100 x 5 mm
L-beam 60 x 8 mm
bending radius min. 190 mm
round bar steel 18,0 mm
weight of the machine ca. 33,0 kg.
Characteristics :
- For precise cold and hot bending of flat, round and square steel
- Stable design for screwing on the workbench
- Infinitely adjustable bending stop with locking pin
- With eccentric quick clamping for efficient work
- Readable bending angle up to 120°
- High repetition accuracy thanks to the bending angle stop
- Ideal for repair shops and locksmiths
Fgedexcux Rjpfx Afpeh
Scope of delivery:
- Bending plate sharp / round
- Radius bending plate R 20 / R 25
- offset block
- Bending plate for round bar
- offset plate
- Radius bending plate R 10 / R 15
- angle stop
- Clamping block with eccentric clamp
- Material stop
Listing

7,546 km
Press brake
SchiaviHFBs 100/ 3
SchiaviHFBs 100/ 3
Call
Condition: good (used), Year of construction: 2007, Marca: SCHIAVI
Modelo: HFBs 100/ 3
Nominal capacity: 100 tons
Table length: 3110 mm
Work table width: 90 mm
Fgjdpfx Aoxaz Igjfpeh
Working height without rise: 910 mm
Maximum distance between tables: 450 mm
Maximum nominal stroke: 250 mm
Gooseneck depth: 405 mm
Distance between uprights: 2700 mm
Maximum pressure: 303 MPa
Oil capacity: 126 dm³
Maximum length (footprint): 4000 mm
Motor power: 7.5 kW
Listing

10,526 km
Straightening Press - Horizontal
MAEM-AH 6
MAEM-AH 6
Call
Condition: used, Year of construction: 2008, Technical details:
pressure: 6 t
Fgsdpow Ng D Tofx Afpoh
stroke: 1020 mm
total power requirement: 3,5 kW
Can only adjust between tips
*
Listing

8,196 km
Press brake
Schiavi Macchine International SrlSTP-C 203
Schiavi Macchine International SrlSTP-C 203
Call
Condition: good (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 29-5843, pressing force: 200 t, table length: 3,100 mm, Schiavi Macchine STPC 4-axis press brake (X-R-Y1-Y2), year 1991, used, sold as seen.
Optionally, a complete overhaul with new Titano CNC and new front safety device from the manufacturer can be provided.
TECHNICAL SPECIFICATIONS STP-C 203
Pressing force: 2000 kN
Table length: 3100 mm
Fgedjw Afrqopfx Afpeh
Distance between uprights: 2520 mm
Throat depth: 320 mm
Stroke: 200 mm
Daylight between tables: 450 mm
Number of intermediates: 15
Mass: 13,000 kg
Approximate overall length: 3900 mm
Oil capacity: 150 L
Approximate overall width: 1415 mm
Approximate overall height: 3000 mm
Year of manufacture: 1991
Serial number: 012-5062
Listing

7,675 km
Horizontal bending machine
ROWAT280 DIGITAL
ROWAT280 DIGITAL
Call
Condition: ready for operation (used), Year of construction: 2004, functionality: unexamined, ★★★ ROWA-BIEGER T280 DIGITAL Horizontal Bending Machine ★★★
STAMPING | STRAIGHTENING | BENDING | EDGE BENDING
● Year of manufacture: 2004
● Machine number: 0804332
● Condition: Not tested
● Delivery terms: Free loaded onto truck
● Location: Wuppertal
● Availability: By arrangement
● Payment terms: Advance payment by bank transfer
● Internal reference number: EDD
● Can be inspected under power: YES
⚙️Technical Specifications
☑️Pressing force approx.: 28 t / 280 kN
☑️Stroke adjustment, stepless: 0 - 250 mm
☑️Max. bending capacity, flat material: 150 x 25 mm
☑️Max. bending capacity, gas pipes: 3/8" - 2"
☑️Operating stroke speed, stepless: 0.6 m/min
☑️Return speed: 1.2 m/min
☑️Working height: 800 / 900 mm
☑️Semi-automatic control
☑️Further specifications see bending chart / photos
☑️400 Volt / 50 Hz / 3 kW
Scope of Delivery
✔ Available documentation
✔ Available tooling
Dimensions & Weights
● Installation dimensions L x W x H approx.: 1200 x 600 x 900 mm
● Weight approx.: 560 kg
If you have any questions or would like to arrange a viewing, please contact us.
⚠️Additional Information:
►Transport to the destination can be arranged upon request
►Sales price is net plus VAT
►The goods are sold with exclusion of any warranty
Fodswyxtvopfx Afpegh
►Technical data subject to change
►Sale subject to prior sale
❗Sale only to business customers❗
Listing

8,196 km
Press brake
LAG MACHINERYG-TOP 185/4000
LAG MACHINERYG-TOP 185/4000
Call
Condition: like new (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 201805015, working length: 4,100 mm, feed length X-axis: 600 mm, feed length Y-axis: 300 mm, total width: 1,550 mm, total length: 3,560 mm, total height: 2,850 mm, pressing force: 185 t, overall weight: 18,000 kg, space requirement height: 3,440 mm, table length: 4,100 mm, installation height: 500 mm, Lightly used press brake in excellent condition.
185 tons, 4 meters, 6 axes
No. 4 rear backgauges, No. 2 retractable pneumatic supports
ESA 660W CNC
LAG press brakes represent the perfect combination of Italian technological innovation, meticulous attention to detail and design, and the substantial production capabilities of China. These strengths, combined with the highest quality European components, allow LAG to offer its customers press brakes, shears, and inserting machines with the best price-to-performance ratio on the market.
This is the top-of-the-line model, equipped with accessories and automation for highly profitable performance.
Main standard configuration of the G-TOP press brake:
- G-FLEX crowning compensation system
- G-CS active crowning system
- 6 axes (Y1-Y2-X-R-Z1-Z2)
- Dual pump system: one main power pump and one pump dedicated to the crowning system
- DSP AP safety system
- Touchscreen control panel on the electrical cabinet
- Sliding front supports
- Touchscreen CNC control
- Reference 4-axis rear backgauge system, model GRP-4 (X-R-Z1-Z2)
Fgjdpfx Aowync Hefpoh
Listing

8,196 km
Press brake
Schiavi Macchine srlHFBs 80.25
Schiavi Macchine srlHFBs 80.25
Call
Condition: reconditioned (used), Year of construction: 2012, functionality: fully functional, working length: 2,550 mm, feed length X-axis: 600 mm, feed length Y-axis: 250 mm, feed length Z-axis: 150 mm, total width: 1,550 mm, total length: 3,560 mm, total height: 2,850 mm, pressing force: 80 t, overall weight: 7,300 kg, space requirement height: 2,850 mm, table length: 2,550 mm, HFBs 80.25 (80 tons 2.5m), 7 axes (X1-X2-R-Z1-Z2-Y1-Y2), year 2012, fully overhauled by the manufacturer. HFBs press brakes represent the most technologically advanced model in the automation of the bending process. Combined with dedicated hydraulics and next-generation software, the HFBs series models provide companies in the sheet metal working sector with the means to increase their competitiveness.
Fsdpowylpqofx Afpsgh
Listing

8,196 km
Press brake
Schiavi Macchine SrlHFBs 50.25
Schiavi Macchine SrlHFBs 50.25
Call
Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 23-9044, total width: 1,560 mm, total length: 3,540 mm, total height: 2,800 mm, pressing force: 50 t, overall weight: 6,700 kg, table length: 2,550 mm, travel distance X-axis: 600 mm, power: 5.5 kW (7.48 HP), distance between stands: 2,120 mm, installation height: 2,800 mm, operating speed: 150 mm/s, stroke length: 250 mm, table height: 910 mm, throat depth: 405 mm, type of input current: three-phase, Schiavi Macchine HFBs 50.25 press brake, 4 axes (X-R-Y1-Y2), year 2006, completely overhauled with new CNC Task SK12 and new front safety device by Nuova Elettronica. Equipped with 4 manual rear stops. HFBs press brakes represent the most technologically advanced model in bending automation. Paired with dedicated hydraulics and next-generation software, HFBs series models provide sheet metal processing companies with an effective solution to enhance their competitiveness. HFBs press brakes are especially suited for integration into a robotic bending cell.
Fodswybhpopfx Afpsgh
Listing

7,893 km
Straightening Press - Single Column
EITELP 6,3 S
EITELP 6,3 S
Call
Condition: excellent (used), pressure 6,3 t
Fgsdpfewuu A Asx Afpoh
throat 200 mm
stroke 200 mm
dayligth max 500 mm
table surface area 450 x 420 mm
weight of the machine ca. 1,5 t
dimensions of the machine ca. 1,2 x 0,6 x 2,0 m
Listing

7,868 km
Hydraulic press
HidrogarneFDM-150E/3000
HidrogarneFDM-150E/3000
Call
Condition: new, functionality: fully functional, machine/vehicle number: FDM-150E/3000, operating speed: 7 mm/s, reverse speed: 9 mm/s, overall weight: 10,000 kg, total length: 2,750 mm, total width: 800 mm, total height: 3,100 mm, pressing force: 150 t, Equipment: documentation/manual, safety light barrier, HYDRAULIC PRESS FOR FOLDING.
The double-column hydraulic press FDM-150E/3.000 belongs to the F series and is specially designed for folding operations.
It utilizes an optimized hydraulic system with a pressure of 295 Bar, ensuring prolonged durability and reliability.
It meets and satisfies all essential safety and health requirements according to CE regulations.
STRUCTURE AND TABLES
• Features a rigid fixed bench welded structure made exclusively from S355JR steel.
• Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision.
• Calculated and designed using finite element software.
• Includes upper and lower machined tables made from C45E steel with DIN-650 grooves. The upper table ensures perfect alignment with four cylindrical side guides of 80 mm diameter, equipped with maintenance-free anti-friction bimetallic bushings.
• Lower grooved table measuring 3.100 mm x 600 mm.
CYLINDER AND HYDRAULIC GROUP
• Two double-acting main cylinders with chromed pistons and maintenance-free anti-wear guides.
• Single-speed motorized hydraulic group. Includes cylinder decompression valve.
• Glycerin manometer with tonnage reading.
ELECTRICAL INSTALLATION AND SAFETY
• Includes a SIEMENS mod. SIMATIC S7 1200 safety PLC and a 7” HMI touchscreen mod. KTP-700 CONFORT located in the electrical panel. Allows programming of operating modes in semi-automatic and automatic, power, stroke, and holding time. It has storage capacity for 300 recipes, where all the previous values can be programmed.
• Operation is performed via a low-voltage electric pedal.
• To ensure safety, it includes category IV photoelectric barriers located in the front work area, two fixed side guards, and a practicable rear guard with a magnetic disconnection detector.
TECHNICAL SPECIFICATIONS
Power tn 150
Engine Power cv 11
Piston Stroke mm 250
Working Speed mm/s 7
Return Speed mm/s 9
Maximum Pressure Bar 295
Front Light mm 3.200
Side Light mm 500
Useful Vertical Light (Free Distance Between Tables) mm 550
Working Height mm 950
Total Front mm 2.750
Total Side mm 800
Total Height mm 3.100
Weight kg 10.000
Fgedpfowpg D Uex Afpjh
Listing

7,868 km
Straightening press
Hidrogarne400T Portalrichtpresse TL 6000x2520mm
Hidrogarne400T Portalrichtpresse TL 6000x2520mm
Call
Condition: used, Year of construction: 2024, functionality: fully functional, total height: 3,250 mm, table length: 6,000 mm, total width: 3,650 mm, total length: 6,000 mm, table width: 2,520 mm, pressing force: 400 t, overall weight: 28,500 kg, operating speed: 3 mm/s, reverse speed: 18 mm/s, pressure: 319 bar, power: 11 kW (14.96 HP), The TL-400-6000E hydraulic press belongs to the T/NC series and is custom-designed for straightening large welded structures and oxy-cut plates.
Like all the hydraulic presses in the T/NC series, its design facilitates the loading and unloading of large pieces, plates, or structures. It allows access to different pressing points without the need to move the piece, thanks to the lateral movement of the cylinder and the longitudinal movement of the bridge.
Power tn 400
Engine Power kW 11
Working Speed mm/s 3
Approach Speed mm/s 10
Return Speed mm/s 18
Maximum Pressure Bar 319
Piston Stroke mm 450
Lower Table mm 6.000 x 2.520
Front Clearance mm 2.560
Vertical Clearance mm 700
Head Displacement mm 1.900
Bridge Displacement mm 4.900
Working Height mm 800
Total Front mm 6.000
Total Side mm 3.650
Total Height mm 3.250
Weight mm 28.500
STRUCTURE AND TABLES
• Features an electrowelded structure made exclusively from S355JR steel.
• Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision.
• Calculated and designed with finite element software.
• Longitudinal bridge movement is achieved using a frequency inverter and toothed belt.
• Lateral movement of the head is motorized and controlled via a frequency converter.
CYLINDER AND HYDRAULIC GROUP
• Double-acting cylinder with lapped sleeve, chrome-plated piston, and maintenance-free anti-wear guides.
• Equipped with a removable and interchangeable pad to prevent wear on the piston and machined at the end to adapt to tooling.
• Includes a standard anti-rotation device for the cylinder and a calibrated front with end-of-stroke switches to adjust the cylinder's travel.
• Motorized hydraulic group with two speeds and automatic deactivation of high speed.
• Includes a cylinder decompression valve.
• Pressure regulator.
• Glycerin manometer with tonnage reading.
ELECTRICAL INSTALLATION AND SAFETY
• The electrical panel includes a selector that allows choosing between manual or semi-automatic operation.
• Also includes a selector for choosing high-speed approach or low-speed working.
• Operation is carried out via a suspended control station with emergency stop and low-voltage operation.
• Includes a maneuver confirmation button.
• Includes a perimeter-mounted safety rope device.
Fgjdpfewpgmvjx Afpsh
Listing

7,868 km
Straightening press
Hidrogarne300T Horizontal-Richtpresse HV-300-NC
Hidrogarne300T Horizontal-Richtpresse HV-300-NC
Call
Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: HV-300NC, total height: 1,800 mm, total width: 3,200 mm, total length: 2,500 mm, table height: 950 mm, pressing force: 300 t, operating speed: 9 mm/s, reverse speed: 14 mm/s, pressing speed: 2 mm/s, stroke length: 450 mm, Equipment: documentation/manual, This machine has been under lease since 2022 and will be returned to our factory by the customer in the coming months.
We are happy to offer you a new machine:
TECHNICAL DATA:
Power 300 t
Motor power 7.5 kW
Throat 405 mm
Working speed 2 mm/s
Approach speed 9.9 mm/s
Return speed 14.7 mm/s
Maximum pressure 320 bar
Fedpfx Aswk Hkqsfpsgh
Piston stroke 450 mm
Support table 2,500 x 750 mm
Guide diameter 60 mm
Main table 750 x 750 mm
Maximum clearance between tables 900 mm
Working height 950 mm
Support blocks 150 x 150 x 750 mm
Total length 3,200 mm
Total width 2,500 mm
Total height 1,800 mm
Weight 13,300 kg
DESCRIPTION:
Our The HV/NC series horizontal hydraulic ram presses are available with three different press capacities, ranging from 150 to 300 tons. Horizontal hydraulic presses are specifically designed for straightening and bending profiles, bars, and beams.
The machine's horizontal design allows us to easily process large beams and profiles. The latest generation of the HV/NC series horizontal hydraulic press has evolved into a versatile machine that can accommodate a wide range of tooling options.
STRUCTURE AND TABLES
The HV/NC series horizontal hydraulic straightening presses consist of a C-shaped electro-welded structure made exclusively of S355JR steel. It is stabilized and machined after the welding process to ensure perfect parallelism and precision. Calculated and designed using finite element software. This ensures our high standards of robustness, precision, and quality are always maintained.
They are equipped with a main sliding table and a rear support table made of high-strength steel, with grooves according to DIN 650. They are equipped as standard with support blocks made of C45E steel. The main table ensures perfect parallelism thanks to four cylindrical guides with maintenance-free bimetallic bushings and frictionless maintenance.
They are equipped as standard with two height-adjustable guide rollers on each side.
CYLINDER AND HYDRAULIC GROUP
Double-acting cylinder with seamless, cold-drawn tube, chrome-plated piston, and maintenance-free, wear-resistant guides.
Motorized hydraulic group with two speeds and automatic shutdown at high speed. Includes cylinder decompression valve.
ELECTRICAL INSTALLATION AND SAFETY
The machine is equipped with a SIEMENS SIMATIC S7 1200 safety PLC and a 4-inch MTP-400 touchscreen located on top of the electric drive pedal. It allows programming of the semi-automatic and automatic operating modes, as well as the power, stroke, and dwell time of the upper cylinder. It has a memory capacity of 99 recipes, with all values programmable in each recipe.
The electrical control panel features a selector switch for selecting the type of work to be performed manually or automatically, as well as a key selector for maintenance operations.
Electrical and hydraulic maneuvers are redundant and self-controlled. An additional safety block and self-control devices for maneuvers and safety are integrated.
Listing

7,868 km
Straightening press
Hidrogarne100T Portalrichtpresse TL 3000x10000mm
Hidrogarne100T Portalrichtpresse TL 3000x10000mm
Call
Condition: used, Year of construction: 2024, functionality: fully functional, total height: 2,900 mm, table length: 10,000 mm, total width: 3,660 mm, total length: 10,200 mm, table height: 900 mm, table width: 2,545 mm, pressing force: 100 t, overall weight: 26,000 kg, operating speed: 9 mm/s, reverse speed: 14 mm/s, pressure: 320 bar, power: 4 kW (5.44 HP), We are presenting a press from a customer who commissioned the machine in 2024.
MOBILE HYDRAULIC GANTRY PRESS WITH MOVABLE HEAD AND 10 METER LONG TABLE FOR STRAIGHTENING WELDED STRUCTURES AND CUT SHEETS
TECHNICAL DATA
Force T 100
Motor power kW 4
Motor circuit breaker rating kW 0.37
Bridge travel motor power kW 0.75
Working speed mm/s 3
Approach speed mm/s 9.2
Return speed mm/s 14.4
Max. pressure Bar 320
Usable area mm 10,000 x 2,545
Maximum ram stroke mm 450
Maximum open height mm 600
Lateral travel mm 2,120
Gantry travel mm 9,140
Working height mm 900
Overall length mm 10,200
Overall width mm 3,660
Height mm 2,900
Weight kg 26,000
The TL-100/10000E hydraulic press belongs to the T/NC series and is specifically designed for the straightening of welded structures and cut plates. Like all of our hydraulic presses in this series, its design facilitates the loading and unloading of large workpieces. Thanks to the lateral movement of the cylinder and the longitudinal movement of the gantry, it is possible to access various pressing points without having to reposition the workpiece.
The machine meets all essential safety and health requirements in accordance with CE regulations.
STRUCTURE AND TABLE
• Electro-welded frame made exclusively from S355JR steel.
• Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision.
• Designed and calculated using finite element software.
• Longitudinal movement of the gantry is achieved via a frequency inverter and toothed belt.
• The lateral movement of the head is motorized.
CYLINDER AND HYDRAULIC UNIT
• Double-acting cylinder with honed sleeve, chrome-plated piston, and maintenance-free wear guides.
• Equipped with a removable and replaceable wear pad to prevent piston wear, and machined at the end to adapt to tooling.
• Standard cylinder anti-twist device included, with a calibrated front and end-position switches for stroke adjustment.
Fgedpfx Aewkvmnofpoh
• Motorized hydraulic unit with two speeds and automatic shutdown of rapid speed.
• Cylinder decompression valve.
• Pressure regulator.
• Glycerin-filled pressure gauge with tonnage display.
ELECTRICAL INSTALLATION AND SAFETY
• The control panel is equipped with a selector for manual or semi-automatic operation.
• Another selector switch allows for choosing between rapid approach speed and low working speed.
• Operation is via a pendant control with emergency stop and low-voltage control circuit.
• Includes a button to confirm each cycle.
Listing

7,057 km
RADIAL RIVERTING MACHINE
BRACKERRN 280
BRACKERRN 280
Call
Condition: used, BRACKER RN 280 RADIAL RIVERTING MACHINE
Fedewh N H Nopfx Afpogh
MAKE BRACKER, MADE IN SWITZERLAND
MODEL RN 280
CAPACITY RIVET SHANK DIAMETER OF TENSILE STRENGTH 370N/MM2 1.0 mm – 12.0 mm
AIR PRESSURE 14 - 88 PSI
MAX. RIVERTING PRESSURE 340 KGS
RIVERTING TIME 0.1 – 5.9 SECONDS
WORKING STROKE 5.0 mm – 40.0 mm
DIVE MOTOR 0.74 HP
POWER REQUIRED 220V 3PH
MACHINE WEIGHT 340 KGS
MACHINE DIMS L x W x H 1220 x 915 x 1930 mm
PLUS
BRACKER FOOT TREADLE ACTIVATOR
MANUAL HEIGHT ADJUSTMENT OF RADIAL RIVETING HEAD ON DUAL RECTANGULAR WAYS
PRESSURE ADJUSTMENT WITH GAUGE
Listing

7,904 km
Straightening Press - Double Column
HIDROLIKSANHSPS 300
HIDROLIKSANHSPS 300
Call
Condition: new, pressure 300 t
working feed 3-8 mm/sec
Fsdpfx Asvxw Hmsfpegh
stroke 500 mm
return speed 15 mm/sec
table-size 3000 x 1500 mm
tank capacity 45 l
travel x / y 2600 x 1000 mm
daylight 500 mm
total power requirement 18,5 kW
weight of the machine ca. 18 t
Listing

7,893 km
Straightening Press - Single Column
NEFF6 SRK
NEFF6 SRK
Call
Condition: excellent (used), Year of construction: 1970, pressure 6 t
throat 250 mm
stroke 550 mm
table surface area 650 x 500 mm
Fsdpfxovpaado Afpjgh
total power requirement kW
weight of the machine ca. 3,5 t
dimensions of the machine ca. 1,2 x 1,0 x 2,8 m
Listing

7,607 km
Hydraulic press straightening system
SchleicherDruckkraft 10 Ton
SchleicherDruckkraft 10 Ton
Call
Condition: good (used), Hydraulic press, bending machine, straightening machine, profile straightening system, strip straightening machine, strip straightening device, shaft straightening system, combined bending machine-straightening press, profile bending machine, bending machine, flat iron bender, horizontal bending/straightening press, horizontal bending machine
-Hydraulic press: Straightening system Straightening machine Profile straightening system with roller conveyor
-Pressure force: 10 ton
-Pressure: max 100 bar
-Roller conveyors: 2x 1000/170/H1110 mm / rollers Ø 56 x 140 mm
-Transport dimensions: 1335/1220//H1470 mm
-Weight: 807 kg
Fgodpfxjvgu Hao Afpeh
Listing

10,526 km
Single Column Press - Hydraulic
WMW ZeulenrodaPYTE 2.5x150
WMW ZeulenrodaPYTE 2.5x150
Call
Condition: used, Technical details:
Pressure: 2,5 t
throat: 155 mm
max. ram stroke: 280 mm
distance table/ram: 450 mm
Fedpeu Nfv Uefx Afpsgh
clamping plate on table: 260 x 1000 mm
ram speed - forward: 0,08 m/s
ram speed - reverse: 0,32 m/s
mortise hole in ram: Ø 20 x 45 mm
height over floor: 930 mm
total power requirement: 1,1 kW
weight of the machine ca.: 500 kg
dimension machine xH: 0,85 x 1,0 x 17 m
The machine is equipped for straightening work.
*
Listing

10,526 km
Straightening Press - Horizontal
WAGNER DORTMUNDVWG
WAGNER DORTMUNDVWG
Call
Condition: used, Technical details:
pressure: 200 t
stroke: ca. 200mm mm
table surface area: L:1200xH:450 mm
jaw width: 1000x200 mm
total power requirement: 18 kW
weight of the machine ca.: 15 t
dimension machine xH: 4,5x1,5x2,2 m
Fgodpfxsu Nfrpo Afpeh
Beam - Straight Bending Machine
- electric box (LxWxH:0,85x0,8x2,7m)
- chuck intake: LxW 1200x220mm
- chuck adjustment 200mm moveable
- opening width of chucks 300mm
- manual control
accessories:
- div. limit stops, tools, try square and marking gauges
i.D.
*
Listing

7,990 km
Straightening press
Stierli-Bieger2000 RP - 200 to Biege- und Richtpresse
Stierli-Bieger2000 RP - 200 to Biege- und Richtpresse
Call
Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Used straightening press in very good condition for sale.
This universal and robust Stierli straightening press has a 5m straightening beam. It can process beams up to HEA-600 and HEB-600 (with S-235). The machine is operated with the proven Stierli stroke fine adjustment control. It is therefore very easy to operate and allows fast, precise straightening and bending.
Additional options can also be added on request, e.g. driven roller conveyor, NC control, laser measurement etc...
Fodpfx Afeufhzvepegh
(Note: The photo does not correspond to the original image)