Apd Maqmaster, S.l

Condition: refurbished (used), functionality: fully functional, overall weight: 1,150 kg, total length: 1,680 mm, total width: 1,250 mm, total height: 1,390 mm, Year of construction: 2008, operating hours: 882 h, input frequency: 50 Hz, shaft diameter: 105 mm, type of input current: three-phase, Equipment: emergency stop, rotational speed infinitely variable, Profile bending machine PBT25 PC400 (will be refurbished, including a new Y-axis measuring device) For sale is a profile bending machine PBT25 with PC300 control, manufactured in 2008. The machine will be completely refurbished and technically inspected by PBT before sale. Technical data: Machine type: Profile bending machine Manufacturer / Model: PBT25 Control: PC300 (upgrade in 2026) Year of manufacture: 2008 Gedpjz Ak I Isfx Adtoug Operating hours: approx. 882 hours Condition: Good condition. Fully functional. Availability: Approximately two weeks. Further technical details and specifications according to the manufacturer can be found on pbt-ag.com.

Condition: new, Year of construction: 2026, CORMAK SGDCW1000 Industrial Dust Extraction Unit with a Wet (Water) Filter The CORMAK SGDCW1000 industrial dust extraction unit with a wet (water) filter is an advanced device specially designed to work with deburring machines and grinding stations. It is perfectly suited for the safe extraction of dust with an increased risk of ignition and explosion – in particular aluminium dust, as well as during the processing of stainless and mild steel. By immersing contaminated air in water, it effectively neutralizes fire hazards during production processes. Main Advantages and Characteristics of the Device Fire safety: Wet separation of metal dust (aluminium, magnesium) significantly reduces the risk of explosions and ignition of sparks in the deburring machine's extraction system. High filtration efficiency: The extracted air passes through a water tank, where microscopic dust particles are permanently trapped in the tank. Heat recovery: After the cleaning process, the air reaches optimum humidity (approx. 60%) and can be safely returned to the production hall. Durable and robust construction: The device is made of high-quality corrosion-resistant materials and designed for continuous operation under demanding industrial conditions. Godjz Ahurepfx Adtoug Easy maintenance: Easy access to the filtration area and water tank facilitates daily cleaning and servicing. Technical Specifications Motor power — 7.5 kW Maximum capacity — 3000 m³/h (at 20°C and a medium density of 1.2 kg/m³) Fan rotational speed — 2900 rpm Maximum pressure — 4600 Pa Weight — 450 kg Filters — Mesh, 2 × 750 × 810 mm Suction inlets — 2 × Ø200 mm Fan outlet flange — Ø180 / Ø225 mm Overall dimensions (W × D × H) — 1400 × 850 × 2170 mm Construction and Standard Equipment The construction of the wet separator has been optimized for perfect cooperation with modern deburring machines and finishing machines. The standard equipment includes: An efficient industrial fan with a high rotational speed, designed to generate high negative pressure. Two advanced mesh filters with dimensions of 750 × 810 mm. A spacious water tank with a drain for water replacement. Ergonomic inspection panels providing continuous visibility of the filtration process. A safe electrical system adapted to stringent industrial standards.

Year of construction: 2021, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: SIMATIC S7-1500, total width: 2,035 mm, total height: 2,215 mm, product length (max.): 2,200 mm, number of axes: 3, This 3-axis clean CELL 3220 was manufactured in 2021. It features a powerful 600 W diode-pumped solid-state laser with a wavelength of 1064 nm and an integrated water-to-water cooling system. The machine is equipped with a Siemens control unit and a robust ABB robot for enhanced automation. If you are looking to get high-quality laser cleaning capabilities, consider the Clean Laser clean CELL 3220 machine we have for sale. Contact us for further details. • Machine Type: Automated Robotic Laser Cleaning Cell • Laser Source: cleanLASER CL600 Mid-Power Laser • Laser Type: Diode-Pumped Solid-State Laser (DPSSL) • Laser Wavelength: 1064 nm • Laser Operation Mode: Pulsed (ns) • Average Laser Power: 600 W ±5% • Alignment Laser Wavelength: 658 nm • Alignment Laser Power: 28 mW • Cooling System: Integrated Water-to-Water Cooling System • Additional Chiller: Cooler ONE Plus Air (Air-Cooled) • Fiber Cable Type: Quartz Fiber Optic Cable • Fiber Length: 10 m • Fiber Geometry: Square • Protective Hose Diameter: 21 mm • Optical System: STAMP 25 2D Optics • Optics Connection: 90° • Focal Length: 163 mm • Control Unit Brand: Siemens • Control Unit Model: SIMATIC S7-1500 PLC Gujdpoz Ahccefx Adtsg • Drive System: Siemens 1FK7 Servo Drives • Linear Axis System: 3-Axis Portal System • Maximum Axis Payload: Approx. 25 kg • Axis Speed (X/Y): >200 mm/s • Communication Interface: Profinet • Digital I/O: Standard • Software: cleanSTUDIO / cleanCONTROL • Industrial PC: 19" Rack PC • SSD Capacity: 256 GB • RAM: 8 GB • Processor: Intel Core i5 (minimum) or equivalent • Robot: ABB Robot • Gripper: 2-Workpiece Gripper • Conveyor System: Bosch TS2 Transfer System • Loading System: Manual Workpiece Carrier Loading • Discharge Conveyor Length: Approx. 4.8 m • Extraction System: ULT Maxi Plus • Fan Capacity: Max. 4,000 m³/h • Maximum Pressure: 3,300 Pa • Filter Cartridges: 4 × 600 mm • Dust Drum Capacity: 200 L • Extraction Power: 5 kW • Power Supply: 400 V, 3-PhaseAdditional photos are available upon request.

Year of construction: 2019, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: SIMATIC HMI, total width: 2,035 mm, total height: 2,215 mm, product length (max.): 2,200 mm, number of axes: 6, This 6-axis CleanLASER cleanCELL 3220 CL600 was manufactured in 2019. It features a powerful 600 W Q-switched fiber laser, designed for automated laser cleaning and surface treatment of metal components. The system includes a 6-axis industrial robot and a fully aligned beam path for precision cleaning. If you are looking to get high-quality automated laser cleaning capabilities, consider the CleanLASER cleanCELL 3220 CL600 machine we have for sale. Contact us for further details. • Machine Type: Automated Robotic Laser Cleaning Cell • Application: Automated Laser Cleaning / Surface Treatment of Metal Components • Laser Source: cleanLASER CL600 • Laser Type: Q-switched Fiber Laser • Average Laser Power: 600 W • Wavelength: 1064 nm • Laser Class: Class 4 (Laser Source) Guodpfsz Aha Isx Adtjg • Complete System Classification: Laser Class 1 • Laser Optics: STAMP 25 • Scanner Type: 2D Scanner • Working Scan Field: Approx. 65 × 65 mm • Objective Lens: f = 163 mm • Red Positioning Laser: Yes • Pulse Frequency: Variable • Beam Delivery: Fully Aligned Beam Path • External Fiber Length: Approx. 8 m • Door Interlock Connection: Yes • Remote Diagnostics: TCP/IP / USB • Fieldbus Interface: Profinet • Software: cleanSTUDIO • Telediagnostic Software: CLL Remote Diagnostics • Robot Type: 6-Axis Industrial Robot • Robot Programming: Teach Mode • Robot Gripper: Single Part Gripper • Loading System: Manual Loading • Conveyor System: Bosch T2 Carrier System • Buffer System: Multiple Workpiece Carriers • Unloading: Automatic Conveyor • Conveyor Length: Approx. 2 m • Workpiece Carrier: Not Included • Designed Workpiece Types: 2 • Machine Footprint (W × D × H): Approx. 2,035 × 2,200 × 2,215 mm • Machine Frame: Welded Steel Base Frame • Cell Construction: Aluminium Profiles • Work Table: Aluminium T-Slot Plate • Front Door: Folding Door • Electrical Cabinet: Integrated Double Cabinet • Cabinet Width: 1,200 mm • Cabinet Depth: 800 mm • Cooling Requirement: External Water Cooling (

Year of construction: 2001, condition: excellent (used), functionality: fully functional, CNC mandrel bending machine including O-ring assembly Fully automatic, high-precision production cell for the series production of pipework systems (e.g. brake, fuel or hydraulic lines), including a robot, feeding system, dual O-ring assembly and high-quality testing technology. The system combines the legendary precision of a MIIC CNC bending machine with the flexibility of robot-assisted handling and integrated quality assurance. The system is ideal for suppliers to the automotive industry, mechanical engineering or fluid technology sectors. Technical data 1. CNC mandrel bending machine Manufacturer: MIIC (Chubu MIIC Co., Ltd., Japan) Type: EMO-20R-S Year of manufacture: 2001 Control system: Multi-axis CNC control with operator panel Special features: Collet head movable in X / Y / Z, equipped with 3 bending planes for highly complex three-dimensional shapes without tool changes. 2. Loading and unloading robot Manufacturer: Motoman (Yaskawa) Model: ERCS-UP6-A00 Year of manufacture: 2000 Robot control: XRC including original teach-in terminal (handheld control unit) 3. Automatic O-ring assembly stations Gedpfx Adezz Hmqetoug Manufacturer: ASM HASEMO GmbH Type: MOSA-800 / MOSA-1100 Year of manufacture: 2010 (high-quality upgrade/retrofit) Function: 2 O-ring assembly stations including a complete bulk material feed system (vibration hoppers/spiral conveyors) for twist-free and gentle external assembly of sealing rings. 4. Quality assurance & peripherals Measuring computer / leak tester: Innomatec, type: LT-C602 (for direct in-line testing) Blow-off station: Integrated for cleaning

Condition: used, Footprint: approx. 6000 x 7000 x 6850 mm Includes broach(es); not all are present. Rated force: 25 tons Peak force: 37 tons Gsdpezz Hl Tjfx Adtoug Stroke: 66" / approx. 1,676 mm Cutting speed: 0–33 ft/min Return speed: 0–60 ft/min Equipment: retraction unit Table: sliding table, 3 stations

Condition: good (used), workbench, work table, assembly bench -Width: 1530 mm Gujdpfszzqqgox Adtog -Depth: 800 mm -Height: 860 mm -Weight: 110 kg

Year of construction: 2003, condition: ready for operation (used), This machine tool was manufactured in 2003. The Dürr Universal 71C features a comprehensive setup including a work tank, flood tank, continuous distillation, and an automatic sliding door. It also boasts a vacuum unit for drying, a condensate tank, and a drying cooler. Optional equipment like a control panel and ultrasound enhances its versatility. A great opportunity to buy this Dürr Universal 71C machine tool. For more information about this machine tool, please reach out to us. Gedpfx Ajzzn Hxedtoug Additional equipment • Scaffolding with cladding • Work tank // Flood tank 1 // Condensate tank // Flood tank 2 • Continuous distillation • Automatic sliding door • Water separator • Bogie without cover • Storage with drive • Drying cooler • Vacuum unit - drying process // Vacuum unit // Vacuum filling/emptying device • HD - IFW Circulation filtration including chip rinsing • 6 baskets included Machine Benefits Technical Machine Benefits • Control panel • Ultrasound (1 rod transducer) • Heating fb2 • Hgz 028 cooling unit • Reinforced cooling (hgz 064 cooling unit and cooling coils in fb1, fb2, desti. ) • Filling/emptying device for fb2 • Dummy for fb2 • Preservation equipment • Single filter for fb1 // filtration for fb2 • Automatic feeding Extra Information Machine still under power

Year of construction: 2020, condition: used, Bar length: 3000mm, max. bar diameter: 80mm, operating cycle: fully automatic, monitoring and fault diagnostics: via display, part length: presettable, feed control: AC servo motor, bar diameter: adjustable via PLC keypad in 1mm increments, remnant extraction: to the rear or ejection to the front, guide channels: Vulkollan plastic, usable magazine width: approx. 900mm, control: integrated PLC, weight: approx. 2500kg. Documentation available. An on-site inspection is possible. Gedpfezzdyhjx Adtjug

Year of construction: 2023, operating hours: 1,008 h, condition: ready for operation (used), Machine tool manufactured in 2023. This ECOKRAFT LP 22 features a power rating of 22.5 kW and a material bunker capacity of 4 m³. It includes a drum screen with dimensions of Ø 300 mm x Length 1,200 mm and a conveyor belt with a length of 3,600 mm. If you are looking to get high-quality processing capabilities, consider the ECOKRAFT LP 22 machine we have for sale. Contact us for further details. - Machine Type: Pellet Plant / Pellet Press Line- Power Rating (Cutting Mill): 22.5 kW- Material Bunker Capacity: 4 m³ (with discharge)- Material Container Automatic Operation Capacity: 4 m³ (discharge via conveyor belt)- Operating Hours (from HMI readout):- Power On Time: 3795 h- Total Press Run Time: 1008 h- Current Press Run Time: 1008 h- Removal Conveyor: 1158 h- Screening System: 1158 h- Water Pump: 609 h- Bunker Conveyor: 259 h- Bunker Discharge: 230 h- Bunker Agitator: 201 h- Cross Conveyor: 0 h- Drum Screen Dimensions: Ø 300 mm x Length 1,200 mm- Drum Screen Discharge Height: Max. 1,800 mm (variable height adjustment, side filling right/left)- Conveyor Belt Specifications: Length 3,600 mm, Discharge Height 2,600 mm, Belt Width 150 mm, Number of Cleats: 49, Motor Speed 46 rpm- Big-Bag Frame Vario 1.0: Suitable for size 95x95x100 cm (1.0 m³)- Big-Bag Frame Vario 1.5: Suitable for size 95x95x150 cm (1.5 m³)- Optional Equipment & Features:- Pellet Press LP22- Load-dependent feed control- Rotary valve- Frost-proof control panel with touchscreen interface- Remote maintenance and fault analysis module- SMS module- Temperature monitoring and control for press room- Manual potentiometer for material flow regulation- Pressol pneumatic grease system (for 18 kg bucket)- Control cabinet with VFD for LP22 connection- Cable set for automatic operation- Level sensor Guodpfxezza Axo Adtog

Condition: excellent (used), Year of construction: 2024, OPERATING RANGE V807M Min. / max. height 10 – 460 mm Min. / max. width 50 – 1.140 mm Max. positioning weight 15.000 kg Gujdpfszy Sqfjx Adtjg Max. operating width bottom side 1140 mm 1 Bevel angle + / - 50° Minimum automatic infeed length 1900mm Minimum automatic outfeed length Approx. 1400mm 2 1 Applicable to bottom side marking and square tube cutting. 2 1400mm automatic outfeed with at least one 1900mm part in the nesting. OPERATING SPEEDS Max. speed X-axis (measuring system) 60 m/min Max. air speed robot 11.6 m/sec Max. speed additional rotational axis 90 ͦ /sec ROBOT ACCURACY Repeatability ±0.04mm Absolute accuracy ±0.25mm MEASURING ROLL SYSTEM Max. speed 60 m/min Diameter measuring rolls 170 mm PLASMA CUTTING UNIT XPR300 CORE Min. thickness 3 mm Max. thickness 80 mm Max. pierce capacity 45 mm Dross-free cutting max. 38 mm Marking Yes, with same consumables Plasma gas mild steel Cutting O2 (99,5% pure clean, dry, oil-free) Marking Nitrogen gas Shield gas mild steel O2 and Air (ISO 8573-1:2010 Class 1.4.2) Automatic gas console Yes Cutting speed mild steel 6 mm Approx. 4.036 mm / min 130A 12 mm Approx. 3.061 mm / min 170A 25 mm Approx. 1.950 mm / min 300A 30 mm Approx. 1.530 mm / min 300A 40 mm Approx. 940 mm / min 300A 50 mm Approx. 560 mm / min 300A 80 mm Approx. 165 mm / min 300A * Grounding max. 6 m of machine: AC power, PE and service grounds must be connected to all equipment according to local and national codes.

Condition: used, Year of construction: 2009, 2009 HGG Profiling Equipment PLC 600 Plasma CNC Profile Cutting Line with Procam Software Gsdpfozy Itvox Adtsug Cutting Capacity Pipe Range Ø48-Ø610mm. Maximum Cutting Angle 45°. Maximum Pipe Weight 3 Ton. Note: Hard Drive Has been Removed For Sale, Replacements Are Readily Available From HGG. With Fume Extraction Unit, Safety Light Curtain Guards & Signal Tower. Due to new investment the machine must be decommissioned and removed from site by the 2nd of October 2026. Upon clearance of suitable RAMS and certification by BAE Systems any UK rigger can access the site to remove the assets. Induction will be required. UK residents only to be authorised on site. Due to new investment the machine must be decommissioned and removed from site by the 2nd of October 2026. Upon clearance of suitable RAMS and certification by BAE Systems any UK rigger can access the site to remove the assets. Induction will be required. UK residents only to be authorised on site.

Condition: excellent (used), Chip extractor Manufacturer: Ringler Connection hose: 60 mm Voltage: 380 volts Gusdpfx Adezy Hwaetsg Height: 1900 mm Depth: 950 mm Width: 750 mm

Condition: used, Year of construction: 2011, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 400 mm, cutting width (max.): 850 mm, control type: CNC control, pivoting range: 75 °, actuation type: electric, rotational speed (max.): 4,000 rpm, rotational speed (min.): 200 rpm, total height: 3,200 mm, total length: 5,100 mm, total width: 3,300 mm, overall weight: 9,000 kg, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, lighting, motor brake, 1 Mono-spindle drilling machine HDM + HBP band sawing machine Type: HDM 910 HBP 430/854 G (drilling and sawing line for steel construction) Manufacturer: Vernet - Behringer Drilling machine: - Dimensions of working unit: H=3200 L=5100 W=1800 - Weight: approx. 6 tons - Drilling power: 11.7 kW - Rotating speed: 200 to 4000 RPM - Cooling: external lubrication or by centre-cooled drills Sawing machine: - Machine size: Length=1850mm swivel range 3500mm Width=3300mm swivel range 3500mm Height=2600mm - Saw band size: 6.700 x 41 x 1.3mm - Weight: approx. 3 tons - Electric equipment: 400V / 50Hz - Power of motor: 7.5 kW, frequency regulated - Cutting speed: 17-110 m/min Technical capacities: more information can be found in the documentation - Max length of bars: 18m - Max weight of bars: 5 tons Sawing capacities: more information can be found in the documentation Gsdpfszytmzjx Adteug Tool clamp: ISO 40 Tool holders: 2x 5 pockets The industrial PC and the business software were updated in April 2025 (retrofit). The installation has been serviced annually.

Condition: ready for operation (used), Schunk Tribos SVP2 Clamping Device – Quick-Change System Godpfx Adjzyrczeteug You are welcome to visit us for a demonstration. We would be happy to arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and browse our other offers as well. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Year of construction: 2009, condition: used, functionality: fully functional, Professional electrically operated gutter forming machine designed for continuous production of half-round or angular gutters from coil material. Suitable for steel, aluminium and copper. The machine forms gutters directly from metal strip and is suitable for roofing, sheet-metal and rainwater system production. Technical specifications: Gutter type: half-round or angular Available gutter sizes: 125 mm and 150 mm (5" and 6") Godszyly Hepfx Adtjug Material: galvanized/painted steel, aluminium, copper Steel thickness: 0.50–0.57 mm Copper: 16 oz Strip width: 298–381 mm Production speed: up to 16 m/min Electrically operated Continuous roll-forming process Robust industrial construction Advantages: Fast and efficient production with consistent gutter profile and dimensions. The machine is suitable both for workshop production and professional gutter manufacturing operations. Condition: Used, fully operational. Location: Latvia.

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, Oven for powder coating, with internal dimensions of 8200x1600x3600. Gas burner with a power output of 125-390 kW. Guedpfx Aszylxcodteg

Condition: used, Year of construction: 2012, functionality: unexamined, GERIMA SMA 50P portable beveling/edge preparation machines for sale. Quantity: - 2 units Main specifications: - Manufacturer: GERIMA - Model: SMA 50P - Year: 2012 - Portable beveling/chamfering machines Gjdpfx Adszyah Sotoug - Suitable for metal edge preparation and beveling applications - Supplied in transport cases - Inserts/accessories included, as shown in the photos Used equipment, sold as-is. Condition and completeness are shown in the photos. The listed price is for both units. Individual sale can also be arranged. Location: Estonia. Loading/collection: Forklift/pallet handling capability available on-site. Transportation is at the buyer’s expense.

Year of construction: 2022, condition: new, functionality: fully functional, Automatic press loading – double infeed unit + 5-axis manipulator Complete automation solution for the automatic feeding, loading, unloading, and transfer of sheet metal parts in mechanical and hydraulic presses. The installation consists of a QF-LJZ600 double infeed/stacking unit in combination with a QF-5045-S6-5 5-axis manipulator with a 5 kg load capacity. This combination is ideally suited for automating existing presses and can be used for, among other things: • Automatic loading of a mechanical or hydraulic press as an alternative to manual loading • Automatic unloading of the pressed product • Unmanned or operator-assisted production • Transferring a product from one press to a subsequent press • Pick & place applications • Turning and repositioning products • Stacking finished products • Automating multiple consecutive pressing operations Double infeed/stacking unit, type QF-LJZ600 Automatic double-station system for feeding individual sheet metal parts/blanks to the manipulator. Key specifications: • Type: QF-LJZ600 / QFLJZ600×600 • Design: double station • Maximum sheet size: approx. 600 × 600 mm • Minimum sheet size: approx. 60 × 100 mm • Stack height: approx. 300–500 mm • Maximum load capacity: approx. 1,600 kg • Positioning accuracy: ± 0.2 mm Gujdpezx T Dqsfx Adtsg • Production speed: up to approx. 12 cycles/minute, depending on the product and application • Connection: 380 V, 3-phase, 50/60 Hz • Power: approx. 2 kW • Suitable for, among others, steel, aluminum, and copper The dual-station design allows a new stack of material to be prepared while production continues from the other station, thereby minimizing downtime during material changes. 5-axis press manipulator, type QF-5045-S6-5 Servo-driven manipulator, specially designed for automating pressing operations. Key specifications: • Type: QF-5045-S6-5 • 5 servo-driven axes • Maximum load capacity: 5 kg • Equipped with fixture/vacuum pad/gripper • Programmable movements and trajectories • Absolute servo systems with position memory • Positioning accuracy: approx. ± 0.2 mm • Production speed: up to approx. 15 cycles/minute, depending on the application • Different products and movements can be programmed • Suitable for various gripping systems, including vacuum, pneumatic, and magnetic grippers Application for unmanned press production The installation can be integrated with an existing mechanical or hydraulic press. The sheet metal parts are automatically fed from the stack. The 5-axis manipulator picks up the product, positions it in the press, and can automatically remove the product after the pressing operation. Depending on the application, this can be used to create a fully automated or operator-assisted production cell. A possible configuration is, for example: Sheet stack → double infeed unit → manipulator → press → finished product Transfer from press to press Another interesting application is automating a production process with two or more existing presses. The manipulator can remove a product after the first pressing operation and automatically position it in a second press. General The installation was newly purchased in 2022 but has not been used. The installation is offered as a combination of an infeed/stacking unit and a 5-axis manipulator.

Condition: new, functionality: fully functional, Hydraulic alligator shear – 250 kN -> €4,400.00 Hydraulic alligator shear for professional cutting of metal and scrap. Robust steel construction, high cutting performance, and reliable continuous operation. With a maximum shearing force of 250 kN, a shearing frequency of 10–15 cuts/min, and a maximum blade opening of 160 mm. Shearing length 300 mm, drive power 5.5 kW. Ideal for scrap yards, recycling, metal processing, and industrial applications. Technical data: Shearing force: 250 kN Shearing frequency: 10–15 cuts/min Operating pressure: 15 MPa Blade opening: max. 160 mm Shearing length: 300 mm Motor power: 5.5 kW Dimensions: 1,200 × 980 × 1,200 mm Cable stripping machine GM-918KOF Cable stripping machine GM-918KOF -> €1,390.00 High-performance cable stripping machine for efficient processing of copper and aluminum cables. The GM-918KOF impresses with its robust design, easy operation, and a processing speed of up to 30 m/min. Suitable for cable diameters from 1.5 to 50 mm. With a 3 kW motor and mobile design, it is ideal for workshops, scrap dealers, recycling plants, and electricians. Technical data: Performance: up to 30 m/min Motor power: 3 kW Cable diameter: 1.5–50 mm Dimensions: 700 × 560 × 860 mm Weight: 116 kg Cable stripping machine GM-120-2 Cable stripping machine GM-120-2 -> €2,600.00 Professional cable stripping machine for fast and clean processing of thick copper and aluminum cables. The GM-120-2 processes cables with a diameter of 1–120 mm and is particularly suitable for large quantities of cables and industrial applications. With a 2.2 kW drive and 9 + 2 blades, it enables efficient and precise cable processing. Technical data: Motor power: 2.2 kW Cable diameter: 1–120 mm Blades: 9 + 2 pieces Gsdpfxezx S Axs Adtsug Suitable for: Copper and aluminum cables Application: Recycling, scrap yards, cable processing, and industry

Year of construction: 2010, condition: ready for operation (used), travel distance X-axis: 120 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 200 mm, controller manufacturer: SIEMENS, controller model: 840D SL, number of axes: 5, This 5-axis DMG ULTRASONIC 10/ DENTAL 10 was manufactured in 2010, featuring a universal machining center with X/Y/Z travels of 120/120/200 mm. It includes a rotating CNC table, work spindle with HSK-E 32 attachment, and a maximum rotation speed of 40,000 rpm. The machine also boasts an automatic tool changer with 16 stations and Siemens 840D control system. If you are looking to get high-quality milling capabilities, consider the DMG ULTRASONIC 10/ DENTAL 10 machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • A axis: swivel -10° to 120°, max. Rotation speed 100 rpm • C axis: 360° rotation, max. Rotation speed 150 rpm • Automatic pick-up tool changer with 16 stations for hsk-e 32 clamps • Spindle attachments: hsk-e 32 • External coolant tank: 80 l with 2 bar pump • Infrared workpiece measurement: dmg powerprobe 400 • Ethernet interface preparation • Laser tool measurement with renishaw nc-4 iii • 3d quickset tool kit • Automatic feed system: ph 2|4 basic system Extra Information Control: Siemens 840D solutionline Godpfx Aezx Rpdsdtjug Table Diameter: 190 mm Integrated Quick Clamping System: EROWA ITS 100 Coolant Treatment and Oil Mist Extraction Systems Installed Electronic Handwheel and Machine Data Management DMG Powertools Pre-installed

Condition: ready for operation (used), - USED - PILLAR-TYPE DRILLING MACHINE POWER SUPPLY: 400V-50Hz MAX DRILLING DIAMETER: 25 mm Godpfozxu Nuex Adteug SPINDLE: CM3 TABLE SIZE: 350 x 350 mm WEIGHT: 250 Kg OVERALL DIMENSIONS: 550 x 850 x 1700 mm NOTE: ROTARY TABLE WITH CLAMP

Year of construction: 1997, condition: used, Various metalworking machines are available as a package. 1) Sigg TR 60 glass bead blasting machine, year of manufacture: 1997, max. operating pressure: 8bar, with fan and compressor receiver unit. 2) Rema DP 07 grinding/polishing machine, motor power: 0.22kW/0.37kW, voltage: 380V. 3) Double-ended grinding machine. 4) Weiler lathe. An on-site inspection is possible. Gjdszxr R Nopfx Adtoug

Year of construction: 2012, condition: used, X: 550 mm, Y: 350 mm, Z: 400 mm, Ra ≈ 0,07 μm Tel Erezyon Makinesi (Wire EDM) Godpfxezxrh Uj Adtjug

Year of construction: 2019, condition: used, machine/vehicle number: KE01300, This Kleinig riveting machine is being auctioned off online as part of our industrial auction / machine auction – J&S GmbH Automotive Technology – machinery park. Gusdezxf N Eepfx Adtjg You can find this and many other items on our platform.