First Vrtovin d.o.o.

Condition: used, Year of construction: 1999, x-travel 560 mm y-travel 510 mm z-travel 510 mm Bledpfxoyq Slls Ah Isd control Fanuc MSD 501 (Fanuc 16i) spindle speeds 10000 U/min spindle drive 22 kW rapid travel x/y/z 32 mm/min Number of tool station 40 SK40 Pallet dimension 2 x 400x400 mm table load 0,5 t table index 1 ° total power requirement 56 kVA weight of the machine ca. 8,7 t dimensions of the machine ca. 2,9x4,1x3 m Control Fanuc MSD 501, 40 tool stations, it has trough spindle coolant, chip conveyor and two paletts.

Condition: used, Year of construction: 2017, Technical details: x-travel: 560 mm y-travel: 560 mm z-travel: 660 mm control: Celos Siemens 840D SL Operate ERGOline Multitouch turning speeds: 20 - 20.000 1/min spindle drive: 25/ 35 kW max. torque on the spindle: 86 / 130 tool taper: HSK-A63 Number of tool station: 60 diameter of tools max.: 70 mm Tool diameter with no neighbouring tools: 170 mm tool length - max.: 450 mm weight of tools max.: 12 kg numbers of pallets: 2 Pallet dimension: 400 x 400 mm max. workpiece diameter: 630 mm workpiece height max.: 900 mm table load: 400 kg rapid travel x/y/z: 60 m/min Feed x/y/z: 60 m/min internal coolant system feed: 70 bar weight of the machine ca.: 8,5 t dimensions: 3200 x 4800 x 2900 mm Accerories Bsdpoyqybbsfx Ah Isld Rotoclear window Signal lamp 4 colours Electronic handwheel Probe for tool breakage and length measuring Coolant shower Renishaw probe (spindle) Vorbereitung / preparation only HSK cone cleaning station with brushes Horizontal machining center with Siemens - Celos control, full b-axis, tool magazine with 123 pos. HSK-A 63, coolant through spindle 40 bar. The machine has just received a new milling spindle. *

Condition: used, Year of construction: 2004, x-travel 630 mm y-travel 630 mm z-travel 700 mm Control Meldas M650 tool adaptor HSK-A63 Table dimensions 450x450 mm Table load 400 kg number of spindle speeds 300 - 20.000 min-1 spindle taper HSK-A63 coolant durch Spindel drive motor Ac 45/30KW kW Rapid travel Z=60 m/min rapid traverse X,Z = 120 m/min feed Schnittvorschub =0,1-60 m/min rapid traverse B=120 m/min total power requirement 30 kW weight of the machine ca. 15 t FEED RATE Rapid feed rate X,Y 120 m/min Rapid feed rate Z 60 m/min Rapid feed rate B 120 m/min Cutting feed rate X,Y,Z 0,1 – 60 m/min SPINDLE RPM spindle 300 – 20.000 min-1 Spindle taper HSK-A63 Coolant Through spindle ATC Tool holder Special HSK-A63 2 Face contact tool Tool magazine storage 40 pcs Tool change time 2,5 sec. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Bodpfoyqv Azsx Ah Ijld We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2017, x-travel 700 mm y-travel 700 mm z-travel 700 mm Control Siemens type 840Dsl Number of spindles 2 St. Double reversible clamp Bsdpfx Ajyquaroh Iold The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2004, x-travel 800 mm y-travel 630 mm z-travel 710 mm Control Siemens type 840Dsl Number of spindles 2 St. turning speeds 30-12000 U/min tool taper HSK 63 Tool changer 80 Pos. Feed 1-40.000 mm/min NC rotary table (B-axis) 250 degrees, minimum indexing unit 0.001 degrees, NC rotary table (A-axis) 360 degrees, minimum indexing unit 0.001 degrees, Cooling system The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Blsdpfxoyqrx Se Ah Ijd Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 813 mm, table width: 1,270 mm, table length: 1,400 mm, table load: 4,535 kg, overall weight: 20,800 kg, spindle speed (max.): 7,500 rpm, CNC Haas with 15-inch LCD screen Table size: 1400x1270 mm Maximum table load: 4,535 kg Spindle ISO 50, power 22.4 kW Blsdeypv T Rspfx Ah Isd Maximum spindle speed: 7,500 rpm Travels: 1626x1270x813 mm 50-position tool changer Chip conveyor Weight: 20,800 kg

Condition: used, Year of construction: 2011, 2011 OKUMA MA 600 HB 2-APC 4-Axis Horizontal Machining Centre, X Axis 1,000mm, Y Axis 900mm Z Axis 1,000mm, Maximum Spindle Speed 12,000rpm, Table 630 x 630mm, High-Capacity 150-Tool Change Magazine, Fast Tool Change Times. S/No. 158315 (2011) A charge of €4500 for preparation and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blsdpfxeypl H Hj Ah Isd Location: These lots are located in Mielec, Poland.

Condition: used, Year of construction: 2019, 2019 OKUMA MA600HII 4-Axis Milling Machine with OSP P300M Control, 630 x 630mm Table max loads up to 1,200kg, high-speed Spindle 12,000rpm, Traverse Speed 60m/min, full-size Tool Magazine with 171 Stations, X Axis Travel 1000, Z Axis Travel 1000, Y Axis Travel 900. S/No. 224574 (2019) Bsdjyplrpjpfx Ah Ijld A charge of €4500 for preparation and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Location: These lots are located in Mielec, Poland. Please visit our website for more details. Auction 3459

Condition: used, HELLER BEA 7 CNC machining center Control: Siemens Tool holder: SK40 Travel (approx.): X-axis: 630 mm Y-axis: 500 mm Z-axis: 560 mm Spindle speed: up to approx. 6,000 rpm Tool magazine: approx. 40 stations Machine weight: approx. 8,000 kg The machine is of robust construction and is suitable for precise milling and drilling operations in both single-piece and series production. The Siemens CNC control ensures reliable, intuitive operation. Options: With chip conveyor (if available) With tool changer With documentation With various tools With different pallets Bljdpsym Edgjfx Ah Ied

Condition: good (used), Year of construction: 2021, functionality: fully functional, 2 pallets 15,000 rpm spindle Blodpfx Ahoymxp Ns Ied 21 bar through-spindle coolant 4th continuous axis 30-tool magazine Air blower through the spindle Machine available early May 2026 Machine has 8,800 hours

Condition: ready for operation (used), Year of construction: 1998, Horizontal machining center MH-400 with 10-station pallet pool; Flat guideways; Pallet size: 400 x 400 mm; Additional 10 exchange pallets; Pallet can be indexed in 1° increments; Internal coolant supply with Knoll system; 120 tool stations; 10,000 rpm; Chip conveyor; Fanuc control; Machine can be inspected under power by appointment; Price includes machine disassembly! Loading and transport are not included in the price; Bedpfjylnm Uex Ah Ield

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 660 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, controller manufacturer: Sinumerik, controller model: Celos - 840D, table width: 400 mm, table length: 400 mm, rotational speed (min.): 10 rpm, rotational speed (max.): 20,000 rpm, overall weight: 10,000 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 20,000 rpm, coolant supply: 70 bar, spindle nose: HSK 63, number of spindles: 1, number of slots in tool magazine: 60, Horizontal machining center DMG MORI NHX-4000 with 2-fold pallet changer Bljdpfxeylmzde Ah Isd Year of manufacture: 2017 Control: Celos with Sinumerik 840Dsl Operate Program run time: 21,000 hours Technical data: Spindle speed: 10 - 20,000 rpm (speedMASTER® motor spindle) Drive power: 35/25 kW Torque: 130/85 Nm Tool interface: HSK 63 Number of magazine pockets: 60 - ring magazine Travel paths: X-axis: 560 mm Y-axis: 560 mm Z-axis: 660 mm C-axis: 0.001° Pallet size: 400x400 mm Accessories: 2-fold pallet changer Coolant system for high-pressure internal coolant (IKZ) 70 bar - 900 liter tank - paper band filter Chip conveyor Preparation for Renishaw 3D probe

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 630 mm, workpiece diameter (max.): 630 mm, workpiece weight (max.): 400 kg, TECHNICAL DETAILS Travels & Axes Travel X-axis: 560 mm Travel Y-axis: 560 mm Travel Z-axis: 630 mm B-axis: 1° increment index table Rapid Traverses Rapid traverse X-axis: 50 m/min Rapid traverse Y-axis: 50 m/min Rapid traverse Z-axis: 50 m/min Workpiece Dimensions Maximum workpiece height: 900 mm Maximum workpiece diameter: 630 mm Maximum workpiece weight: 400 kg Spindle & Tools Maximum spindle speed: 14,000 rpm Distance spindle center to pallet surface: 80–640 mm Distance spindle nose to pallet center: 100–730 mm Tool magazine: 60 positions Tool change time: 0.9 s Tool holder: BT 40 Pallets Pallet dimensions: 400 x 400 mm Number of pallets: 2 Pallet change time: 6 s Feed Feed rate X-axis: 50,000 mm/min Feed rate Y-axis: 50,000 mm/min Feed rate Z-axis: 50,000 mm/min Work Table Table width: 400 mm Table length: 400 mm Table load capacity: 400 kg MACHINE DETAILS Control model: MSX-701IV Power consumption: 32.8 kVA Blsdpfx Ahsyk A S No Isd Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,400 x 2,600 mm Total weight: 9,800 kg Operating Hours Power-on hours: 46,259 h Operating hours: 26,725 h Machining hours: 17,691 h

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 560 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 560 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, total height: 2,242 mm, table width: 2,170 mm, overall weight: 8,600 kg, spindle speed (max.): 10,000 rpm, tool weight: 7,000 g, product length (max.): 4,177 mm, number of axes: 3, This 4s TAJMAC-ZPS H40 TREND horizontal machining centre was manufactured in 2015. It features a spindle speed range of 40 – 10,000 rpm and an automatic tool changer with a capacity of 45 tools, ensuring efficient operation. With a rapid traverse of 50 m/min and a rotary table indexing range of 360°, this machine offers versatile machining capabilities. Consider the opportunity to buy this TAJMAC-ZPS H40 TREND horizontal machining centre. Contact us for further details. • B axis (table indexing range): 360° • Distances: • Spindle face to rotary table axis: 130–690 mm • Spindle axis to pallet clamping surface: 80–590 mm • Floor to pallet surface: 950 mm • Feedrates: • Feedrates in X/Y/Z: 0–15 m/min (programmable up to 50 m/min) • Rapid traverse in X/Y/Z: 50 m/min • Acceleration in X/Y/Z: 5 m/s² • Rotary table indexing time: • 0–90°: 3.2 sec • 0–180°: 4.6 sec • 0–270°: 5.5 sec • 0–360°: 6.7 sec • Accuracy (VDI/DGQ 3441): • Direct measuring system: Positioning X/Y/Z 0.008 mm; Repeatability X/Y/Z 0.005 mm • Indirect measuring system: Positioning X/Y/Z 0.010 mm; Repeatability X/Y/Z 0.006 mm • Spindle: • Transmission: Belt • Continuous torque (S1): 90 Nm • Torque at overload (S6-40%): 127 Nm • Automatic Tool Changer: • Capacity: 45 tools • Tool search: Both directions • Tool-to-tool time: 3.5 sec • Max tool diameter: 85 mm (with adjacent tools), 125 mm (without adjacent tools) • Max tool length: 300 mm • Max total weight in changer: 200 kg Additional equipment Blodpfx Ajykacxeh Ijd • Automatic pallet changer (APC): • Number of pallets: 2 • Pallet exchange time: 10 sec • Pallet weight: 90 kg • Coolant filtration unit: TECNIMETAL (weight without coolant: 280 kg) Technical Specification Taper Size SK 40

Condition: good (used), Year of construction: 2008, Ref. -No.: 10626 Manufacturer: DMG Type: DMU 210 P Year of construction: 2008 Type of control: CNC Control: Heidenhain ITCN 530 Bodpfx Ahjyiyg Ij Iold Storage location: Halberstadt Country of origin: Germany X-Travel: 1800 mm Y-Travel: 2100 mm Z-Travel: 1250 mm B-Axis: -30 / +180 ° C-Axis: 360 ° Table Load: 8000 kg Clamping Area: 1.700 mm Tool Taper: HSK - 100 Spindle Speed: 10.000 RPM Max. Torque: 288 Nm No. Of Working Stations: 60 coolant reservoir: 40 bar L. Further information: - The DMG DMU 210 P 5-axis machining center is suitable for high-precision machining of large, heavy workpieces. - Direct position measuring systems in all axes - Heidenhain TS workpiece measurement - Electronic handwheel setup mode - Chip conveyor chip disposal - Double gripper tool changer - Motor spindle technology The machine can be viewed under power by arrangement.

Condition: used, Year of construction: 2008, x-travel 500 mm y-travel 560 mm z-travel 500 mm Control Matsuura G-Tech 30i max. turning speeds 20.000 min/-1 number of tool places 210 Pos. Bljdpfx Aeyigaljh Ijd total power requirement 52 kW In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features: - 5-pallet changer - new spindle including ceramic ball bearings - new spindle cooler Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: ready for operation (used), Year of construction: 2002, spindle speed (max.): 10,000 rpm, travel distance X-axis: 510 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, spindle motor power: 15,000 W, total height: 2,424 mm, overall weight: 10,800 kg, tool weight: 10,000 g, number of axes: 4, This Kitamura mycenter H400 was manufactured in 2002. It features a full simultaneous 4-axis capability, a pallet changer, and a FANUC 15M control system. The machine has a maximum workpiece diameter of Ø600 mm and a pallet size of 400 × 400 mm. With a spindle speed of 20 – 10,000 rpm and a tool magazine capacity of 100 tools, consider the opportunity to buy this Kitamura mycenter H400 horizontal machining center. Contact us for further details. • Table/Pallet: • Pallet size: 400 × 400 mm (15.7" × 15.7") • Pallet indexing: 1° • Max workpiece diameter: Ø600 mm (23.6") • Max workpiece height: 510 mm (20") • Max load on pallet: 400 kg Bjdpfx Aoyid Tcjh Ijld • Travels: • B: 360° (continuous) • Spindle: • Taper: NST No.40 • Max torque: 191.7 Nm • Feed rates: • Rapid traverse (X/Y/Z): 24 m/min • Cutting feed: 0 – 10,000 mm/min • ATC (Automatic Tool Changer): • Magazine capacity: 100 tools • Tool selection: Random • Max tool diameter: Ø95 mm (adjacent tools) / Ø150 mm (empty adjacent) • Max tool length: 350 mm • Accuracy: • Positioning: ±0.005 mm • Repeatability: ±0.002 mm • Machine dimensions: • Floor space (approx.): 3,495 × 4,044 mm

Condition: excellent (used), Year of construction: 2017, operating hours: 6,473 h, functionality: fully functional, machine/vehicle number: 12780000173, DMG MORI NHX 5000 About the Machine: High-precision and reliable machine. Available immediately. Technical Data: - Control: Siemens 840D - Travel X-, Y-, Z-Axis: 730/730/880 mm - C-Axis Travel: 360° - Rotary Table Clamping Surface: 500x500 mm - Spindle Speed: 20-15,000 rpm - Tool Interface: SK40 - Tool Magazine with 60 positions - Pallet changer with 2 stations - Automation-ready Equipment: - Internal cooling, 70 bar with belt filter system - Work area rinsing - BLUM measuring probe - Rinse gun - Chip conveyor - Signal light - Handheld control device Inspection / test under power on site can be arranged by appointment. Bljdpfxeyhwpwe Ah Iod We are happy to offer you transport, installation, and commissioning at your location. Everything from a single source: We at Baumgärtner CNC GmbH specialize in: - Service - Maintenance - Overhauling - Automation for DMG machines and other renowned manufacturers. We accompany you—from the machine purchase, through transport and installation, all the way to commissioning and ongoing maintenance or repair work. You can rely on us.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 27,052 h, functionality: fully functional, machine/vehicle number: 11680001673, travel distance X-axis: 560 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller model: HEIDENHAIN iTNC 530, spindle speed (max.): 12,000 rpm, The machine spindle was replaced in 2017! Machine equipped with KUKA loading robot! TECHNICAL DETAILS X-axis travel: 560 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Number of axes: 4 Blsdpfx Ajyhnpzsh Isd Maximum workpiece weight on table: 500 kg Maximum workpiece height: 850 mm Maximum workpiece diameter: 630 mm Table rotation speed: 40 rpm Table clamping torque: 1,580 / 2,300 Nm Maximum torque: 1,550 Nm Pallet changer dimensions (L x W): 400 x 400 mm Maximum pallet changer workpiece weight: 500 kg Number of tools in the tool changer: 120 Maximum tool diameter: 80 mm Tool diameter with free adjacent slots: 160 mm Maximum tool length: 400 mm Maximum tool weight: 12 kg Tool holder: HSK 63 DIN 69893 Form A Spindle diameter: 225 mm Spindle speed: 0 – 12,000 rpm Feed speed: 0 – 60,000 mm/min Rapid traverse: 60 m/min Maximum feed force: 10 N MACHINE DETAILS Control system: HEIDENHAIN iTNC 530 Spindle drive power: 20 kW Connection: 50 Hz 3x 400 V Total power requirement: 58 kVA Dimensions & Weight Dimensions (L x W x H): 5,000 x 2,700 x 2,700 mm Machine weight: approx. 9,700 kg Operating Hours Power-on time: 75,886 hours Operating time: 27,052 hours EQUIPMENT Loading robot KUKA High-pressure coolant system Coolant through spindle (IKZ) 40 bar Spindle taper air purge Probe Chip conveyor Pallet storage rack Setup stations (number): 60 (3x20) Lighting Rinse gun Rotating viewing window Electrical cabinet air conditioner Foot pedal Status indicator lamp

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 20, controller model: GE FANUC 15-MB / 4 axis, spindle speed (max.): 12,000 rpm, number of axes: 4, TECHNICAL DETAILS Number of axes: 4 Number of pallets: 7 Pallet size: 320 x 320 mm Number of tools: 96 Tool holder: ISO 40 Max. spindle speed: 12,000 rpm MACHINE DETAILS Control: GE FANUC 15-MB / 4 axis Connection: 50 Hz 3x 380 V EQUIPMENT Coolant system Bedjyhnc Ujpfx Ah Ield Through-spindle coolant (IKZ) Tool breakage monitoring Chip conveyor Spindle cooling

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 41, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 300 kg, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 500 mm Travel Y-axis: 400 mm Travel Z-axis: 500 mm B-axis: Available Number of pallets: 4 Pallet dimensions: 400 x 400 mm Blsdoyhnchjpfx Ah Ied Maximum workpiece weight: 300 kg Number of tools: 96 Maximum tool diameter: 80 mm Diameter with adjacent tool pockets empty: 160 mm Maximum tool length: 300 mm Maximum tool weight: 12 kg Tool change time: 2.5 s Average chip-to-chip time: 6 s Tool holder: ISO 40 DIN 69871 Distance spindle to table: 100 - 600 mm Distance vertical spindle to table: 20 - 420 mm Maximum spindle speed: 12,000 rpm Feed rate: 1 – 12,000 mm/min Rapid traverse: 20 m/min MACHINE DETAILS Control: GE FANUC Series 16-T Compressed air connection: 6 bar Connection frequency: 50 Hz Connection voltage: 3x 400 V Spindle power: 5.5 / 7.5 kW Total power consumption: 60 kVA Noise level: 75 dB (A) Dimensions & Weight Dimensions (L x W x H): 4,330 x 3,200 x 2,520 mm Machine weight: approx. 6,000 kg EQUIPMENT Coolant system 500 l High-pressure coolant system 65 bar Paper filter system 3D probe RENISHAW Chip conveyor Coolant / mist extraction Spindle cooling

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Table Size (254 x 254mm) 10″ x 10″ Travel (X, Y, Z) (305 x 305 x 330mm) 12″ x 12″ x 13″ Spindle Taper NST No. 30 Spindle Speed 150~15,000rpm 30,000 Option Tool Storage Capacity 40 Pcs.- Expandable in the Field to 102 Tools! Tool Change Time (T-T/C-C) 1.2 Sec. /2.8 Sec. Rapid Feed (X,Y,Z) 2,362ipm (60m/min) Rapid Feed (B) 108,000deg./min. (300rpm) Bledoyhgd Rjpfx Ah Iod Power Requirement 30KVA

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, Travel distances: X-axis: 560 mm, Y-axis: 640 mm, Z-axis: 640 mm Table: Pallet size: 400 x 400 mm Number of pallets: 2 Indexing: 1° steps Spindle: Spindle taper: SK-40 Max. speed: 18,000 rpm Power: 35 kW Tool magazine: Capacity: 60 tools Equipment: Control: Mazatrol SmoothG Bledpfx Ahoyhczfs Isd Tool length measurement Through-spindle coolant with 32 bar Niagara flushing Through-spindle air supply Renishaw OMP 60 probe Renishaw Inspection + (Version 2022) Tool ID system Chip conveyor Additional filter cartridges Thread cutting without compensation chuck G00 inclination function CE marking The machine can be inspected under power.

Condition: good (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 660 mm, controller manufacturer: Siemens, controller model: Sinumerik 804D, rotational speed (max.): 20,000 rpm, spindle speed (max.): 20,000 rpm, spindle nose: HSK 63, number of spindles: 1, number of slots in tool magazine: 60, Horizontal machining center DMG MORI NHX 4000 with 2-pallet changer Year of manufacture: 2017 Control: Celos with Sinumerik 840Dsl Operate Program run hours: 21,000 h Technical data: Spindle speed: 10 – 20,000 rpm (speedMASTER® motor spindle) Drive power: 35/25 kW Torque: 130/85 Nm Blodsyghq Ajpfx Ah Isd Tool holder: HSK 63 Magazine positions: 60 – ring magazine Travel paths: X-axis: 560 mm Y-axis: 560 mm Z-axis: 660 mm C-axis: 0.001° Pallet size: 400x400 mm Equipment: 2-pallet changer Coolant system for through-spindle coolant (IKZ) 70 bar Chip conveyor Renishaw 3D probe

Condition: ready for operation (used), Year of construction: 2012, Machining centre Manufacturer: SW EMAG Model: BAW06-22 Year of manufacture: 2012 Control system: Siemens 840 D sl Spindle distance: 600 mm X-axis travel: 600 mm Y-axis travel: 630 mm Z-axis travel: 510 mm Max. rapid traverse X/Y/Z: 45 m/min Tool holder: HSK A63 Tool magazine: 2x42 positions Milling spindle speed: 17,500 rpm Drive power: 38 kW Blodpfx Ajyft R Seh Isd Knoll coolant system IKZ high-pressure internal coolant pump 70 bar