SCHWEIZER TECHNOLOGIES GmbH

Condition: used, Year of construction: 2000, gebraucht 2000 070165A prompt, Zwischenverkauf v Italien 27900 € 1 40 to 2.6 mm 650 mm 380 mm 120 mm 8 - 78 mm 145 1/min 6 60 mm 40 mm 195 mm 297 mm Csdpjyrhpvsfx Ah Iogp 800 mm 3 kW 1450 mm 1150 mm 2150 mm 2200 kg Two-hand control panel and foot pedal Work area enclosure with safety switch Additional bolster plate Central lubrication system Stroke counter Operating manual with CE declaration of conformity

Condition: new, neu ca. 10 Wochen ab Auftrags Italien 66700 € 1260.63 € 50 to 3.5 mm 800 mm 450 mm 22 - 110 mm 60 - 100 1/min 70 mm 8 70 mm 235 mm 290 mm 5.5 kW 1330 mm 1000 mm 2650 mm Csdpfeyq Sqnsx Ah Iogp 4500 kg touch screen control semi automatic stroke adjustment die space adjustment with mechanical display decimal resolution adjustable motor speed overload protector double bolster plate oil circular lubrication dynamic brake safety light guard Keyence Automation and control of press parameters by PLC, alarms and informations displayd on human machine interface touch screen. Standard monitoring: - press speed view and adjustment - programmable piece counter and maintenance piece counter - die space adjustment with brake motor - Semi automatic or automatic stroke adjustment - die safety control - alarms view - overload protector

Condition: used, Year of construction: 1966, pressure 035 t throat 225 mm stroke 8 - 100 mm no. of strokes 110 /min distance table/ram, max. stroke up, adjustment up 400 mm Cedpfsyq Smcex Ah Iegp table surface area 580 x 460 mm hole in the table 250 x 150 mm table height over floor 700 mm table adjustable 230 mm ram surface 355 x 120 mm ram adjustment 70 mm power requirement 2,2 kW weight 1,5 t dimensions (WxDxH) 1,0 x 1,5 x 2,05 m SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 1989, pressure 040 t throat 220 mm Cjdpfxsylzxqj Ah Ijgp stroke 8 - 100 mm Stroke rate 32 - 160 / min Distance table/ram, max. stroke up, adjustment up 370 mm Table surface area 630 x 450 mm Hole in the table 200 mm Passage to the back 280 mm Ram surface 360 x 260 mm Power capacity 3,0 kW Weight 3,0 t Dimensions (WxDxH) 1,5 x 1,8 x 2,6 m SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: good (used), Year of construction: 1998, throat depth: 250 mm, ram adjustment: 180 mm, table height: 830 mm, total height: 2,400 mm, drop-through hole in table: 170 mm, table width: 800 mm, table length: 500 mm, installation height: 450 mm, stroke adjustment: 102 mm, total width: 1,100 mm, total length: 1,300 mm, overall weight: 4,100 kg, pressing force: 50 t, power: 3 kW (4.08 HP), compressed air connection: 6 bar, Eccentric press, pressing force 50 t, table size 800 x 500 mm, throat depth 250 mm, adjustable stroke 8 - 110 mm, 60 strokes/min, ram adjustment 180 mm, motor 3 kW, dimensions 1100x1300x2400 mm, weight approx. 4100 kg Cgjdpfxoyly Evj Ah Iep

Condition: good (used), Year of construction: 2010, pressing force: 250 t, Used Yangli press brake, 250 ton press force x 3200MM, type MB 8, 8 axes + 1. Can be inspected in operation. Year: 2010, equipped with Delem control. Bottom dies 50-65-100MM + 1 new standard upper blade. Cgsdpfxoykzq Re Ah Ijp

Condition: used, Year of construction: 1992, pressure 25 t throat 375 mm stroke 8 - 80 mm no. of strokes 120 Hub/min ram adjustment 45 mm total power requirement 1,5 kW Cedpfsykb Ebox Ah Ijgp weight of the machine ca. 2,5 t

Condition: used, pressure 35 t throat 300 mm stroke 10 - 120 mm no. of strokes 110 Hub/min Cgodpfxoykb D Ro Ah Isp ram adjustment 50 mm total power requirement 3 PS

Condition: used, Year of construction: 2004, pressure 25 t throat 375 mm stroke 80 mm no. of strokes 120 Hub/min ram adjustment 45 mm total power requirement 3,5 kW Cgsdpsykb D Dsfx Ah Iep weight of the machine ca. 2,8 t

Condition: used, Year of construction: 1996, pressure 45 t throat 230 mm stroke 0 - 160 mm no. of strokes 120 Hub/min ram adjustment 55 mm total power requirement 3,0 kW weight of the machine ca. 2,95 t Codpsykb Dwefx Ah Iogp

Condition: used, pressure 35 t throat 220 mm stroke 10 - 120 mm no. of strokes 120 Hub/min ram adjustment 50 mm total power requirement 2,2 kW weight of the machine ca. 2,5 t Cedjykb Dqspfx Ah Ijgp

Condition: used, Year of construction: 1992, pressure 25 t throat 375 mm stroke 8 - 80 mm no. of strokes 120 Hub/min ram adjustment 45 mm total power requirement 1,5 kW Cgodpfx Ajykb Dksh Isp weight of the machine ca. 2,5 t

Condition: used, pressure 45 t throat 230 mm stroke 10 - 140 mm no. of strokes 80 Hub/min ram adjustment 55 mm total power requirement 3,0 kW Cgedpfjykb Ddjx Ah Iop weight of the machine ca. 2,7 t

Condition: used, pressure 25 t throat 250 mm stroke 10 - 120 mm no. of strokes 120 Hub/min ram adjustment 45 mm Cjdpjykb A Tsfx Ah Ijgp total power requirement 1,5 kW weight of the machine ca. 1,95 t

Condition: refurbished (used), pressure 40 t throat 225 mm stroke 8 - 84 mm table surface area 580 x 450 mm ram adjustment 55 mm no. of strokes 130 Hub/min ram surface 185 x 180 mm ram hole 40 mm hole in the table 210 x 170 mm Cgjdeyf N Dzepfx Ah Iop clamping plate 570 x 450 mm total power requirement 3,5 kW weight of the machine ca. 2,7 t

Condition: good (used), Year of construction: 2012, Condition: 2012 overhauled to the latest UVV Installation height: 800 mm Ram stroke: 500 mm Cgedpfx Aeydlx Ssh Isp Projection: 360 mm Nominal force: 400 kN Hydraulic pressure: 160 bar Operating hours: 1356 Other: new control from Pilz, electrical circuit diagrams available Video about functionality available

Condition: used, Year of construction: 1990, pressure 125 t throat 360 mm stroke 8 - 140 mm daylight, max. stroke above - ram adjustment above 500 mm ram adjustment 100 mm ram surface 800 x 400 mm table surface area 1000 x 720 mm clamping plate 990 x 670 mm clamping plate thickness 80 mm no. of strokes 60 Hub/min tool shank hole (depth x diameter) 90 x 50 mm total power requirement 23 A weight of the machine ca. 11 t dimensions of the machine ca. BxTxH 2770 x 2520 x 2950 mm - Hydraulically operated Ortlinghaus clutch-brake combination - Belt drive - Hydraulic overload protection - Hydraulic connecting rod clamping - Motorized tappet height adjustment - Semi-automatic stroke adjustment - Manual TDC correction - Fixed table - Reverse switch (return) - Electric stroke counter - Electric preselection counter - Cam switch mechanism Cgodpfxoyatx Es Ah Iop The machine is partially overhauled in-house as follows: - Disassembled, cleaned, and completely technically inspected - New paintwork (also available according to customer specifications) - New seals - New control cabinet with touchscreen, including wiring of the machine - Current press inspection

Condition: used, Single-column eccentric press HELMERDING Type EH 25 B Machine No. 5917 Year of manufacture: 1993 Pressing force: 25 tons Throat depth: 180 mm Table area: 560 x 360 mm Ram area: 315 x 150 mm Table through-hole: 150 x 100 mm Stroke adjustment: 8 - 82 mm Ram adjustment travel: 60 mm Installation height max.: 330 mm Clamping pin bore: Ø 40 mm Strokes per minute: 145 Table height adjustment: 150 mm Table height above floor: 630 - 780 mm Motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - Hydraulic clutch-brake combination, manufacturer: ORTLINGHAUS Cedpfxsyath Ts Ah Isgp - Electric foot switch and two-hand control - Automatic central lubrication by BEKA lubrication system - Electrical cabinet with 2-channel contactor control - Press table height-adjustable via 2 threaded spindles - UVV [accident prevention regulations] according to VBG 7n 5.1 for manual loading operations - Electrical diagram Space requirements (L x W x H): 1600 x 1100 x 1900 mm Weight: 2 tons Good condition

Condition: good (used), Stock number: 2829 Manufacturer: Eisenwerk Hensel Bayreuth - EBU Cgedpfxjx Uwb Ie Ah Isp Machine number: P5044070 Type: SK 25 Press force: 25 t Table: 595 x 410 mm Ram: 170 x 150 mm Passage hole: 210 x 170 mm Throat depth: 200 mm Strokes per minute: 150 Stroke: 4 to 80 mm Ram height adjustment: 70 mm Table adjustment: 240 mm Condition: good Connection: 1.5 HP (1.1 kW) Weight: 1.5 t Dimensions: 800 x 1,300 x 2,000 mm

Condition: good (used), Year of construction: 1990, In good technical condition, fully functional. Year of manufacture: 1990. Nominal press force: 63 tons. Table working surface dimensions: 800 x 630 mm. Machine weight approx. 6 tons. Codpfox Sqtfsx Ah Iogp

Condition: good (used), Year of construction: 1978, Pressing force 45 t Cjdpfx Ahjx Rvbxo Ijgp

Condition: new, Year of construction: 2025, table width: 400 mm, table length: 600 mm, stroke adjustment: 45 mm, overall weight: 1,500 kg, pressing force: 35 t, stroke length: 70 mm, power: 3 kW (4.08 HP), punching force: 35 t, warranty duration: 24 months, Equipment: safety light barrier, An eccentric press is a type of mechanical press powered by force generated via an eccentric mechanism, used for cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it offers an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 35 Ton is designed for stable performance in cold forming applications. Its rigid steel frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure provide reliable performance suitable for serial production. Key Advantages - Consistent stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement thanks to centralized automatic lubrication - Production-ready operation with PLC control and dual-hand/foot pedal controls Applications - Cold cutting and punching operations - Cold cropping applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel construction frame • Four-sided guideways Cgsdsx N Nd Rjpfx Ah Isp • Spheroidal cast iron connecting rods and gear bearings • Crankshaft and transmission shafts made from 4140 tempered steel • Fully automatic central grease lubrication system • Pneumatic clutch and brake combination • Conforms to CE safety directives • Dual-coil safety valve • Manually adjustable stroke • Light curtain finger–hand safety system • PLC control system • Dual-hand/foot pedal control system • Mechanical safety lock system • Emergency reverse motor operation • Compliant with occupational safety regulations • CE compliant ✅ OPTIONAL FEATURES • Anti-vibration mounts • Touchscreen LCD (standard for 150–300 ton) • Hydraulic safety system (standard for 200–300 ton) • Spare bolster plate • Decoiler, feeder, and straightener • One set of dies tailored to your specifications • 8-sided slide guide ✅ TECHNICAL SPECIFICATIONS (35 TON) Capacity: 35 Ton Usable bolster size: 400×600 mm Stroke length: 0–70 mm Nominal material thickness: 2.5 mm SPM (strokes per minute): 120 Bolster–ram distance: 330 mm Adjustment (ram adjustment): 45 mm Bolster hole diameter: Ø130 mm Ram die shank diameter: Ø35 mm Safety lock: Mechanical safety lock Lubrication system: Automatic lubrication PLC: Included Safety barrier: Included Operation system: Pneumatic clutch–brake system Mounting type: Floor-standing Frame type: C-type steel construction Motor power: 3 kW Motor speed (RPM): 1450 Approximate machine dimensions (L×W×H): 1100×1400×1800 mm Approximate weight: 1500 kg Note: Please contact us for any modifications required in technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales services are managed by CRONOSSTECH.

Condition: used, Year of construction: 2007, pressure 125 t stroke 12 - 140 mm daylight, max. stroke above - ram adjustment above 495 mm ram adjustment 100 mm ram surface 800 x 400 mm table surface area 1000 x 720 mm clamping plate 990 x 670 mm clamping plate thickness 80 mm total power requirement 70 A weight of the machine ca. 11 t dimensions of the machine ca. BxTxH 2770 x 2520 x 2950 mm - Hydraulically operated multi-disc wet multi-plate clutch and spring-loaded safety brake - Hydraulic overload protection - Hydraulic connecting rod clamping - Motorized ram height adjustment - Semi-automatic stroke adjustment - Ram weight compensation - Manual TDC correction - Belt drive - Press force measuring device - hanging control panel - reverse switch (return) - electric stroke counter - electric preselection counter - electronic cam switch - clamping plate - two-hand control panel, swiveling, height-adjustable - Operating hours counter Cedpfx Ahjxx A Dto Iogp - 1 set of swing elements - with feed The press is technically inspected at our premises and undergoes a current safety inspection.

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: EEP-30.22070 A.D, throat depth: 180 mm, ram adjustment: 60 mm, table height: 700 mm, total height: 2,150 mm, drop-through hole in table: 150 mm, table width: 580 mm, table length: 360 mm, total width: 1,500 mm, total length: 1,250 mm, overall weight: 1,900 kg, pressing force: 45 t, distance table to ram: 350 mm, stroke length: 90 mm, power: 4 kW (5.44 HP), compressed air connection: 6 bar, input voltage: 380 V, stroke rate (max.): 145 1/min, Equipment: CE marking, documentation/manual, safety light barrier, For Sale: ELMALI EEP-PK45 C-Type Eccentric Press – Like New Condition (+ gratis compressor) We are offering a nearly unused ELMALI EEP-PK45 eccentric press machine, manufactured in 2022 in Turkey. This robust C-frame press delivers a 45-ton pressing force, making it ideal for precision metal forming applications. The machine has never been used in production and is in excellent condition — ready for immediate operation. - Steel frame construction body - Ram and similar pieces steel casting - Pneumatic clutch and brake combination - 4 guide ram - Ram adjustment - Main and extra table with T slots - Single or continous stroke - Foot pedal or double hand control - Centralized lubrication system - Gear in oil bath - Photocell safety guard - Die Adjustment and Reverse turn mode For the machine we are offering a KÄSER Premium 200/24W type compressor as a gratis. Cgjdpfjxq Sbfsx Ah Ijp

Condition: used, Manual folding machine Schuller MAH 2-2000, working width 2030 mm, sheet thickness 2.0 mm Cgodsxn Avnopfx Ah Ijp