Baya Stolar

Condition: excellent (used), Year of construction: 2021, For sale is a high-quality Format4 Profil 45 M from Felder. This machine was manufactured in 2021 and is in excellent condition. The Profil 45 M is a heavy-duty, precision swivel spindle table saw designed for professional use. The electric adjustment of the milling spindle and the fence allows for comfortable, quick, and very precise operation. Features and technical data: +Manufacturer: Format4 / Felder +Type: Profil 45 M +Year of manufacture: 2021 +Condition: very good +Robust and low-vibration industrial design +Stable cast iron milling table +Electric height adjustment of the milling spindle +Electric milling spindle swivel from -5° to 45° +Digital display for spindle height and swivel angle +Milling spindle quick-change system +Milling spindle diameter: 30 mm +Usable spindle height above the table: 140 mm +Milling spindle lock from the outside +Five speeds: 3,500 / 4,500 / 6,000 / 8,000 / 10,000 rpm +Right and left rotation +Large milling table opening: 320 mm Hnjdpfxezz Nm Ts Ac Ast +Milling fence for tools up to a maximum diameter of 250 mm +Electromotive MULTI adjustment system for the milling fence +Digital display of the fence position +Anodized aluminum fence scales +Working height: approx. 890 mm +Dust extraction connections on the milling fence and under the table +Weight depending on equipment: approx. 730 kg +Operating voltage: 400 V Comfortable and precise operation: The height and angle of the milling spindle are conveniently adjusted electrically and read off precisely via digital displays. The milling fence can also be adjusted electromotively. This allows for quick, precise, and reproducible adjustments. The milling spindle quick-change system enables rapid tool or spindle changes and significantly reduces setup times. The milling fence can be conveniently folded away for tool changes. Thanks to the large table opening, even larger milling tools can be safely used below the table. The rear-swiveling milling spindle ensures comfortable workpiece guidance, good chip removal, and allows for the trouble-free use of a feed device even when swivel milling. An extremely stable and user-friendly table saw for demanding milling operations, individual pieces, and professional series production. -Inspection and a test run are possible after prior arrangement. -Loading on-site is no problem. -You will receive an invoice with VAT shown. -Price: €10,500 net

Condition: excellent (used), Year of construction: 2015, Holzkraft T 45 W classic Year of manufacture: 2015 Table saw with a robust steel-cast iron construction Tilts up to -45° Usable spindle length: 108 mm Max. tool diameter: 190 mm Hsdpfjzzci Ujx Ac Aont Table dimensions: 1000 x 435 mm Dimensions of aluminum sliding table: 1000 x 270 mm Motor: 4 kW, 400 V 3500/6000/8000/10000 rpm Equipped with a crosscut fence and sliding table Support arm on a swivel arm Aluminum telescope fence with folding stops and eccentric clamping device Otherwise, standard version Includes a 3-roller feed device

Condition: new, Year of construction: 2026, HOFMANN TFS 107 Table milling machine with swivel adjustment +/- 45.5° 7.5 kW motor, 400 V, 50 Hz, Table size 1,200 x 815 mm, heavy-duty ribbed cast iron table, with table rings Electronic start and braking system Electric height and swivel adjustment in rapid and slow mode accurate to 1/10, height adjustment approx. 145 mm, Swivel adjustment +/- 45.5° 4 speeds 3,000/4,500/6,000/9,000 Milling fence type 2601, efficient with multiplex fence jaws Fixed milling spindle Ø 30 mm with quick-release nut "fix" Hsdpfozyf Ikex Ac Aont Left/right rotation, machine socket, arc milling guard type TAPOA, Hofmann "Centrex". Includes options: - Table size 2000 x 815 mm with extendable support by 480 mm, instead of standard table - Stepless speed control TFS 107 from 1,500 to 10,000 rpm incl. 7.5 kW motor, - HOFMANN milling fence type 2620, including quick-release system for the fence jaws, digital display - 2 cast iron fence jaws 500/500 mm - Control panel moved upwards - Tool compartment for TFS 107

Condition: good (used), Year of construction: 1996, functionality: fully functional, For sale is a used SAMCO T 40 I table milling machine / swivel spindle milling machine, manufactured in 1996. This compact and robust milling machine features a spindle that can be swiveled up to 45°, multiple speed settings, and clockwise/counter-clockwise rotation. The spindle adjustment is conveniently done using the side handwheel. Technical specifications: Manufacturer: SAMCO / SCM Type: T 40 I Year of manufacture: 1996 Machine number: KK/032907 Voltage: 380 V / 50 Hz Motor power: 3 kW / 4 HP Speeds: 3,500 / 6,000 / 8,000 rpm Spindle length: approx. 125 mm Max. tool diameter: approx. 180 mm Hodezxx Egopfx Ac Asnt Swiveling milling spindle: up to 45° Clockwise/counter-clockwise rotation Motor brake Manual spindle height adjustment Milling fence with dust extraction option Weight: approx. 175 kg Used, well-maintained condition considering its age. The machine is compactly built and is well-suited for carpentry shops, joineries, and smaller woodworking businesses. Transportation is possible for an additional charge! The machine is currently still at the customer's location but would be immediately available! The machine will be inspected before sale. In the case of a sale to commercial customers, the warranty will be excluded due to the year of manufacture. Technical data and features may vary. Errors, prior sales, and changes are subject to change. All information without guarantee.

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 471292, functionality: fully functional, operating hours: 438 h, power: 7.5 kW (10.20 HP), spindle diameter: 40 mm, rotational speed (max.): 9,000 rpm, total length: 3,000 mm, total width: 1,500 mm, total height: 1,820 mm, overall weight: 1,150 kg, Equipment: documentation/manual, Offering a used Martin T26 Duo Control swivel spindle milling machine for sale. Sale due to company restructuring. GS tested, BG test certificate, CE compliant. Technical data: Spindle swivel: -45 to +45° Height adjustment: electric with rapid and slow feed Depth adjustment: electric Table opening: electrically adjustable from 70 - 220mm Swivel adjustment: electric Feed rate (height): electric Stop adjustment: manual Hedpfx Aszwp Uioc Aent Height display: digital Swivel angle display: digital Milling stop display: digital Spindle diameter: 40mm with steep taper SK 40, collet quick-change system incl. torque wrench Electropneumatic locking via selector switch. Spindle speeds: 3000, 4500, 6000, 9000 rpm Power consumption: 7.5 / 9.5 kW Motor brake: wear-free, electrically braked Dust extraction connection: 2 x 120mm Machine length: 3000mm Machine width: 1400mm Weight: 1150kg Year of manufacture: 2007 Includes: Variomatic 4N feed system, continuously adjustable from 2-20 m/min, Protective device type Centrex Swivel device for milling stop Martin table extension on both sides with extendable workpiece support, approx. 3000mm long. Martin support for feed system, swivelable, with motorized height adjustment. Aigner Integral stop 650/500mm incl. filler bar. The machine is still connected and can be tested. Price plus VAT.

Condition: used, Swivel spindle milling machine Manufacturer: Schröder Hnedpfx Aozuyw Noc Ast Table dimensions: - Width 1,260 mm + 430 mm extension - Depth 770 mm + 400 mm extension Spindle diameter: 30 mm Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: new, Catalog number: S0367 TECHNICAL DATA dimensions of the work table: 800x800mm motor power S1/S6: 3.0 / 4.4kW diameter of the hole in the table: 190mm spindle diameter: 30mm spindle tilt: 0° -45° Hnodpfszullfsx Ac Aet spindle speed: 1400 / 3500 / 6000 / 8000rpm rotation: right, left vertical spindle travel: 175mm working height of the spindle: 125mm max. tool diameter for profiling / for tenon machining: 180/250mm diameter of the extraction nozzle: 120mm dimensions L/W/H: 2800x1800x1090mm weight: 410kg – machine is new – tilting spindle – with side table Net price: 17200 PLN Net price: 4100 EUR, depending on an exchange rate of 4.2 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2023, Swivel spindle milling machine Manufacturer: Hofmann Hnodpfjztzntjx Ac Aot Type: TFS 107 Year of manufacture: 2023 Swivel range: -45.5° to +45.5° Table: 2,000 x 813 mm Table height: 890 mm Power: 7.5 kW Speed: 1,500 - 10,000 rpm, stepless speed adjustment Spindle diameter: 30 mm / 40 mm Vertical adjustment: 145 mm Tool holder: MK5 Feed: Yes Motor brake: Yes Dust extraction port diameter: 120 mm Weight: approx. 820 kg Included: - Augner stop jaws - 40 mm spindle

Condition: used, Year of construction: 2021, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 8 A, input frequency: 50 Hz, actuation type: manual, Felder table router F 500 M, acquired on March 25, 2021, for profiling, rabbeting, grooving, and edge processing of wood pieces. A classic stationary router for professional woodworking shops. Key technical data: - Machine type: Table router / Spindle router Hnsdoztxt Hspfx Ac Ast - Model: Felder F 500 M - Spindle diameter: Ø 30 mm - Usable spindle height: approx. 100 mm above the table - Table opening: approx. 180 mm - Spindle speeds: 3000 / 6000 / 8000 / 10,000 rpm - Max. tool diameter at the router fence: approx. 220 mm - Motor power: 4.0 kW - Working height: approx. 916 mm - Weight: approx. 300–320 kg depending on the version - Dust extraction port: approx. 120 mm at the router fence No warranty.

Condition: good (used), Year of construction: 1993, functionality: limited functionality, power: 11 kW (14.96 HP), spindle diameter: 30 mm, total length: 2,600 mm, Planed cast iron table Table length 2600 mm Motorized height and swivel adjustment Swivel range -5° to +45° Hedpfxozp I Eko Ac Aont Feed unit 4 speeds 3/4/6/9000 rpm Adjustment range of the milling cutter arbor 150 mm Aigner stop jaws The machine is in very good condition Motor brake defective Digital display defective

Condition: like new (used), Year of construction: 2015, spindle diameter: 30 mm, pivoting range: 130 °, actuation type: electric, rotational speed (max.): 3,000 rpm, rotational speed (min.): 10,000 rpm, total length: 1,000 mm, total width: 1,000 mm, total height: 1,200 mm, Equipment: CE marking, documentation/manual, SCM Formula T60I Undercut Spindle Moulder | Spindle Tilt | 2015 – LIKE NEW! SCM Formula T60I Undercut Spindle Moulder | Spindle Tilt | 2015. For sale: a professional SCM Formula T60I undercut spindle moulder from the renowned Italian manufacturer, SCM Group. This machine, manufactured in 2015, is designed for demanding carpentry and production applications. Its robust construction, weighing 624 kg, ensures stable operation and high machining accuracy. TECHNICAL SPECIFICATIONS: - Spindle tilt from 90° to 135° - Smooth spindle speed adjustment from 3,000 to 10,000 rpm - Powerful 5.5 kW motor - Solid cast iron worktable - Professional design for continuous operation - Precise adjustment settings - Machine ready for operation - Machine tested (video of the machine in operation available on TikTok and YouTube – jbsmaszyny) Technical data: Manufacturer: SCM Group Model: Formula T60I Year of manufacture: 2015 Power supply: 400 V Motor power: 5.5 kW Spindle speed: 3,000 – 10,000 rpm Spindle tilt: 90° – 135° Weight: 624 kg You can test the machine on-site. Financing options available through leasing or installments. WE ORGANIZE TRANSPORT. Hnjdpszp Hx Nefx Ac Aot WHERE CAN YOU SEE OUR MACHINES? JBS STOLARSKIE MACHINES WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, For sale is a Felder F 700 table router in high-quality industrial design, including a Felder F38 3-roller feed system. The machine impresses with its robust construction, powerful drive, and precise adjustment options, making it ideal for professional use in carpentry and joinery workshops. Technical data: Manufacturer: Felder Type: F 700 Year of manufacture: 2012 Motor power: 7.35 kW Voltage: 400 volts Frequency: 50 Hz 3-phase design Router spindle adjustable by 45° Electronic height adjustment with digital display (mm/inch) Speed levels: 3,500 / 6,500 / 8,000 / 10,000 rpm Made in Austria Hjdozm Rziepfx Ac Asnt Equipment: Felder 3-roller feed system F 38 Swivel and height-adjustable feed system Sliding table Table extension Solid aluminum router fence Precise router fence adjustment Large cast iron table Digital display for router height Swivel indicator for the router spindle Emergency stop switch Professional industrial design The machine is in good used condition and shows only the usual signs of wear and tear due to age and use. It is ideally suited for daily professional use. An inspection and test run are possible at any time by appointment. Transportation is possible for an additional charge! The machine will be inspected before sale. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: used, Hofmann under-table milling machine Spindle adjustable up and down, and at an angle from -25 to +45 degrees, electrically Interchangeable spindle shank, diameter 40mm Long tables, 270cm with extension Culaga adjustable electrically with AIGNER fences 4-roller feed system Hnedpfxszh E Uaj Ac Aet Spindle speed continuously adjustable from 1000 to 10,000 rpm 11KW motor Left-right rotation Spindle lock Brake The machine has a new, non-original control system. The milling machine is in working condition and ready for operation.

Condition: excellent (used), Year of construction: 2000, Robust oscillating milling machine T 26, swiveling from -45 to +45 degrees. Reversible drive motor 5 / 6kW with automatic motor brake. R/L rotation. Swiveling angle from -45 to +45 degrees, electrically adjustable. Height adjustment max. 150mm, electrically adjustable. When the height is adjusted, the correction factor for the swiveling angle is displayed in the upper display, which is then set on the stop, allowing settings to be realized according to drawings. Four speeds: 3000, 4500, 6000 and 9,000 rpm. Spindle diameter 30mm, quick-change spindle with torque wrench. Comfort stop T226 with digital displays for total adjustment and infeed stop individually, as well as input of the cutter diameter; the cutting depth is automatically calculated. Stop with lifting device, can be swivelled away (for curved milling). Table extension on the right and left with extendable workpiece support. Support can be extended by 700mm. Table length approx. 2400mm. Foldable stop for mortise milling. Hjdpfxozbm Tfs Ac Aent Workpiece clamping device Aigner Centrex. Original Martin cast iron table left 500mm, right 500mm with two insert guide rails. 3-roller feed HolzHer ET117, with 8 speeds, R/L rotation, new rollers. Feed socket, switchable from the control panel. Comfort stand with electrically height-adjustable feed support, which can be swivelled away for machine setup and then easily locked into place. Dust extraction nozzle 2 x 120mm. Compressed air connection 6 bar. Emergency stop switch. Some parts of the machine have been newly painted (special color RAL1015). V-belts renewed. Operating manual. CE marking. Dimensions approx. 3000 x 1500 x 1830mm (LxWxH). Weight approx. 1800kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this provider".

Condition: used, Year of construction: 1982, Includes a brand new star-delta switch. Used Good condition Cleaned Functionally tested Overhauled Manufacturer: Martin Type: T23 Year of manufacture: 1982 Machine no.: 82468 Hnedpfx Ajzbc D Hsc Aet Motor kW, increased power: 4.7 / 5.7 Swiveling range: 0 - 45° Motorized / mechanical brake: Foot brake Motor, 2 speeds / pole-changing: yes Speed stages rpm: 3 / 4.5 / 6 / 9000 Right-left rotation: yes Table size l x w mm: 1100 x 950 Milling arbor diameter mm: 30 Milling fence with fine adjustment: yes Socket for feed mechanism: yes Dust extraction connection mm: 100 / 120 Space required approx. L x W x H mm: 1100 x 950 x 1100 Weight approx. kg: 1000 Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected Without warranty and guarantee.

Condition: good (used), Year of construction: 2017, - Milling spindle swivel range: 90 degrees / 45 degrees - Spare milling spindle: included Hnsdpfx Asy Tm Rpsc Aet

Condition: good (used), Year of construction: 1985, functionality: fully functional, Spindle milling machine with a comprehensive set of tools included free of charge. Hnjdpfx Ajy Suhtec Ajt

Condition: excellent (used), Year of construction: 2022, Tilting Spindle Moulder Manufacturer: SCM Model: NOVA TI 105 Year of manufacture: 2022 Table size: 254 x 85 cm Power: 7 kW Tilting: Single-sided 45° Height adjustment: 120 mm Spindle diameter: 30 mm Height and angle adjustment: Electric Left/right rotation: Yes Speeds: 3500/6000/8000/10000 rpm Hjdpey Sg Ncofx Ac Asnt Motor brake: Yes Including feeder

Condition: excellent (used), SCM minimax tw 45c spindle moulder (bottom spindle) Spindle adjustable up and down manually Spindle tiltable manually at 0-45 degrees Hnjdpfx Asy R Sgqoc Aet 30 mm spindle diameter, 5 kW motor, 3 spindle speeds. Very good condition, fully ready for work.

Condition: used, Year of construction: 1980, Martin Spindle Moulder Model: Martin T 23 Year of manufacture: 1980 Spindle diameter: 30 mm Spindle stroke: 145 mm Max. tool diameter: 250 mm Pole-changing motor: 4.7/5.7 kW Hnedpfx Acey Rzyts Ast 2 speeds: 3000, 6000 rpm Table size: approx. 940 x 1100 mm Table height: approx. 850 mm Automatic motor brake Emergency stop switch Weight: approx. 800 kg

Condition: used, Year of construction: 1992, Machine cleaned, function tested, partially overhauled. Spindle runout extremely precise, maximum 1/100 mm. Pneumatic hoses, filter pressure regulator, and mist lubricator replaced. Test run carried out. Used machine, excellent condition, premium features with plunge spindle. With this milling machine, both entry and exit milling operations can be performed. This means the milling spindle can be pneumatically controlled to plunge in and out via a table operated by adjustable limit switches. Manufacturer: Hofmann Model: TFS 1200 Year of manufacture: 1992 Machine no.: P127-92-222-723 Motor: 5.0 / 6.2 kW (reinforced) Swivelling range: -5° to +45° Motor brake Motor: 2 speeds, pole-changeable 6 speed levels: 3 / 4 / 5 / 6 / 8 / 10,000 rpm Forward/reverse rotation Table size: 2,000 x 830 mm Milling arbor diameter: 30 mm Milling fence with fine adjustment Digital displays for milling fence, diameter, and cutting depth Electric height adjustment Electric swivel adjustment Hsdpfx Acey Ay Dze Ajnt Digital displays for swivel angle and spindle height Extraction connection: 2 x 120 mm diameter Required space: approx. 2,000 x 1,600 x 1,400 mm Weight: approx. 1,000 kg Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in as-inspected condition, function tested without overhaul, without warranty or guarantee

Condition: used, Year of construction: 1996, Used, excellent condition Partially overhauled, new switches Spindle run-out 0.03 mm Motor newly mounted and rewound Make: Lazzari Model: Base 45 Year of manufacture: 1996 Machine-No.: 9601076 CE type-tested Motor power: 4.0 kW Tiltable 45° Automatic brake 5 speed settings: 3 / 4.5 / 6 / 8 / 10,000 rpm Forward/reverse operation Hnodpfx Acey Ay Dnj Aet Table size: 1100 x 700 mm Spindle shaft diameter: 30 mm Control panel on top Extraction port: diameter 120 / 120 mm Space requirement: approx. 1100 x 1200 x 1400 mm Weight: approx. 490 kg Total connected load: 4 kW Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in current as-inspected condition, without warranty or guarantee.

Condition: used, Used, excellent condition, including milling fence. Milling fence with fine adjustment, central adjustment via rack and pinion. Machine fully cleaned and lubricated, partially overhauled. Various parts replaced. Star-delta switch overhauled. Foot brake adjusted. Fence jaws replaced. Spindle runout checked: precise, only 0.01 mm tolerance. Brand: Bäuerle Model: SFM 2 Machine No.: 8719 Tilting range: 0 to 45° Brake Motor with 2 speeds/pole changeable 6 speed levels: 1,800 / 4,500 / 5,600 / 6,000 / 9,000 / 12,000 rpm Reversible direction of rotation Table size: 1150 x 1200 mm Spindle diameter: 30 mm Milling fence Required space: approx. 1200 x 1200 x 1300 mm Weight: approx. 1,000 kg Hnedpfsyt R Nusx Ac Ajt Location: 97447 Gerolzhofen, loaded free of charge, unpacked Sold as seen, function tested. No overhaul, no warranty or guarantee.

Condition: new, functionality: fully functional, input voltage: 400 V, rotational speed (max.): 9,000 rpm, rotational speed (min.): 1,800 rpm, table width: 360 mm, table length: 1,000 mm, overall weight: 218 kg, Equipment: CE marking, Smooth and effortless movement of the sliding table carriage ensures easy and convenient processing of large workpieces. Hnsdpfx Acoyt I Ego Ast A robust spindle moulder safety hood with precisely adjustable aluminium limiting rails guarantees accuracy and operational safety. The electronic display allows for quick and legible spindle speed readings. The equipment includes a tilting fence with an eccentric tensioner for stable material guidance. The dynamically balanced spindle ensures exceptionally quiet and smooth performance. Spindle speed changes are quick and convenient via the poly-V belt. A stable outrigger table (optional) allows processing of large components without the need for additional support. All aluminium parts (sliding table, fences, etc.) are anodised, increasing durability and resistance to corrosion. The large spindle moulder unit, made from cast iron and tiltable from +5° to -45°, ensures versatile application. The backward tilting spindle offers added benefits – better utilisation of feed, maximum safety, and precise machining. Technical specifications: Table size - width: 1000 mm Table size - depth: 360 mm Sliding table length - format/roller: 1000 mm Sliding table width - format/roller: 240 mm Sliding carriage type: Sliding table Outrigger table dimensions (optional): 600 x 410 mm Working height: 895 mm Spindle diameter: 30 mm Tilt range of spindle: +5° to -45° Spindle height adjustment: 100 mm Clamping length: 100 mm Max. tool diameter: 200 mm Max. retractable tool diameter: 180 mm Table opening: 200 mm Spindle speed min.: 1800 rpm Spindle speed max.: 9000 rpm Number of speed settings: 4 (1800 / 3000 / 6000 / 9000) Extraction port diameter: 100 mm Motor power: 3.9 kW Motor power S1 100%: 2.8 kW Voltage: 400 V Dimensions - width: 1240 mm Dimensions - depth: 710 mm Dimensions - height: 1200 mm Weight approx.: 218 kg

Condition: used, Year of construction: 1994, used, in top condition, excellent features, many accessories with 3-axis control, pneumatic spindle change, electronic adjustment of the milling fence 99 memory programs, 15 exchange spindles, adjustable table insert Manufacturer: SCM Type: T150 Class Year of manufacture: 1994 Motor: enhanced 6 / 7.5 kW Swiveling range: -10° to +45° Motor brake Motor: 2 speeds / pole-reversing Speed stages: 3250/5000/6500/10,000/min Right/left rotation Table size: 2700 x 700 mm Milling arbor diameter: 14 x 30 mm / 1 x 40 mm Milling arbor mount: HSK Milling arbor quick-change system: SK / HSK Table top extension: 2x 650 mm Frame support: extendable Aluminum fence jaws Milling fence with fine adjustment Digital displays for milling fence: diameter, clamping depth, jaw offset Protection and pressure device Control panel on top Control panel: swiveling - electric height adjustment - electric swivel adjustment - electric milling fence Positioning control for 3 axes: height/swivel/milling fence with 99 programs Digital displays for swivel angle, spindle height, fence depth Swiveling device for milling fence Socket for feed device New price: approx. EUR 40,000 - 45,000 Hnodpfxeythdvj Ac Aet Dust extraction connection: 120 x 120 mm Space requirement: approx. 2700 x 1300 x 1800 mm Weight: approx. 1073 kg Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, functionality tested without overhaul without warranty