Italpiume

Year of construction: 1998, condition: used, Ring diameter: 200mm, bobbin length: 550mm, connected load: 13kW, mains connection: 380V, three-phase connection: N + PE, an on-site inspection is possible. Iedpez Dkirefx Aqceig

Year of construction: 2003, condition: used, Number of spindles: 5, ring diameter: 200mm, bobbin length: 550mm, compressed air connection: 6-8bar, compressed air consumption: 0.5l/s, voltage: 380V, frequency: 50Hz, connected load: 6kW, CE marking present, an on-site inspection is possible. Iedpfez Dkifjx Aqcjig

Condition: used, The machine has been professionally retrofitted, with an upgraded control system featuring a digital operator panel on the left side and improved safety guards, and was fully operational until a few years ago. Without nameplate or documentation. An on-site inspection is possible. Ijdpfxjz Da Nbe Aqceig

Year of construction: 1990, condition: used, Number of carriers: 16, an on-site inspection is possible. Isdpfxsz Da Rfj Aqcoig

Year of construction: 2002, condition: used, Number of carriers: 32, an on-site inspection is possible. Ijdpfx Aez Da N Ueqcjig

Year of construction: 2009, condition: used, Number of carriers: 80, an on-site inspection is possible. Iijdpfx Aqez Da N Iscog

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: 1915, Oteman Delta P03K Quick automatic fabric spreading machine with spreading table, built 2003 in Igualada (Barcelona). In working order. TECHNICAL DATA Manufacturer: Oteman S.A., Igualada (Barcelona), Spain Model: P03K Quick Serial number: 1915 Year of construction: 2003 Maximum working width: 1,800 mm Maximum load: 80 kg Maximum roll diameter: 600 mm Maximum speed: 2 m/sec Ijdpfx Aqez At Scscoig Power: 2 kW Voltage: 380 V three-phase Current: 10 A Frequency: 50/60 Hz Machine weight: 498 kg Control: Delta + JT Kombi programmable controller Spreading table: included, with travelling rails Condition: in working order The machine is installed and running in Seville. It can be seen and tested in operation by appointment. Machine owned by the seller, free of encumbrances.

Year of construction: 2017, condition: used, Working width: 2500mm, an on-site inspection is possible, not under power. Iedpfx Aqjzy Rvyoceig

Year of construction: 2012, condition: used, A Sabal backpart moulding machine for shaping shoe counters and heel areas is offered. Hot activation stations: 2, cold pressing stations: 2, quick-change device for pads and lasts, pincer pull device: adjustable with millimetric precision, pincer pull at activation and pressing stations, valve monitoring, mechanical stops at the pressing stations, switchable heated pressing station for processing Lefa counters, flanging function. Weight: approx. 600kg, machine dimensions X/Y/Z: approx. 1760mm/800mm/1750mm. Documentation available. An on-site inspection is possible. Iodpfx Aqozvghwscjig

Year of construction: 1970, condition: used, functionality: unexamined, ZANGS card copying machine for Verdol 1344 / 896 / 448 circuit boards For sale is an original ZANGS card copying machine for Verdol cards or circuit boards. Suitable for: Verdol 1344 circuit boards Verdol 896 circuit boards Verdol 448 circuit boards Year of manufacture: unknown, presumably around 1970 Dimensions: Length: approx. 150 cm Iodpfx Aszvgfioqcsig Width: approx. 125 cm Height: approx. 160 cm Weight: approx. 900 kg Electrical connection: 400 V three-phase current Motor power approx. 1.5 kW Special feature: The machine has 2 cylinders for reading the patterns. Condition: The machine has been out of operation for several years and has not been tested for functionality recently. It is complete and in good condition. The visual condition can be seen in the photos. Spare parts are available and will be included with the machine. The machine is particularly suitable for weaving mills, textile companies, owners of older Verdol Jacquard machines, and as a spare or backup machine. Inspection possible by appointment. Due to the weight of approximately 900 kg, only collection or transport by arrangement is possible. Sale in its current condition as shown in the photos.

Year of construction: 2020, condition: ready for operation (used), A comprehensive machine package for textile processing, automatic cutting, laser cutting, industrial sewing operations, punching and riveting is offered. 1) CNC cutting table Atom FlashCut 222, year of manufacture 2020, machine weight: approx. 650kg, the machine will be available at the end of 2026. 2) CO₂ laser cutting and engraving machine Trotec Rayjet 50 with associated extraction system, working area: approx. 457mm/305mm, laser power: 30W, max. processing speed: approx. 1.5m/s, Aigner/Trotec Atmos Cube extraction system, year of manufacture: 2020, airflow: 320m³/h. 3) Single-needle lockstitch flatbed machine with triple feed and large vertical hook Dürkopp Adler 867 ECO, subclass 867-190020-M, max. stitch length: approx. 9mm, clearance: approx. 335mm, clearance height: approx. 125mm. 4) Single-needle high-speed lockstitch machine Juki DDL-9000B-SS, year of manufacture 2019, max. sewing speed: approx. 5000stitches/min, max. stitch length: approx. 5mm, needle bar stroke: approx. 30.7mm. 5) Single-needle high-speed lockstitch machine Dürkopp Adler 261-140342-02, max. stitch length: approx. 5mm, control: AHE59. 6) Post-bed sewing machine Pfaff 591-900/81-BL. 7) 2x identical swing-arm cutting presses Moneus 1333. 8) 5-thread overlock machine Chee Siang Golden Wheel CSK-2516D-03/S35-3x5. 9) Manually operated riveting and setting machine with mechanical foot operation. 10) Rotary screw compressor Kaeser Aircenter SM 13, year of manufacture: 2020, motor power: 7.5kW, max. operating pressure: 11bar, motor speed: 2955rpm, control: Kaeser SIGMA CONTROL 2. Documentation available. Inspection possible by appointment. Ijdpfx Ajzt Skxjqcjig

Year of construction: 2017, condition: ready for operation (used), Six identical Demsan fabric doubling and winding machines are offered. Max. fabric width: 2000mm, fabric infeed: from roll and in open width, fabric delivery book/roll: 1000mm, double folded, max. operating speed: 60m/min, operating direction: forward, control: Hitech touch panel. Machine dimensions X/Y/Z: 4000mm/3100mm/2600mm, weight: approx. 2390kg. Equipped with fabric tension control, electronic length measuring system with encoder, calibration function, RS-232 interface, end-of-fabric photocell, photocell-controlled fabric catcher and centering system, dancer roller mechanism, Argox thermal printer, photocell-controlled edge guiding system, motorized fabric guide adjustment, AC geared motors, frequency converters and pneumatic opening unit. Four machines were manufactured in 2017, and two machines were manufactured in 2016. Documentation available. Inspection possible by arrangement. Iodpezta Eqsfx Aqcsig

Year of construction: 2023, condition: ready for operation (used), A Herzog two-head square braiding machine is available. Number of carriers 1/2: 12/16, tandem carrier configuration: 8, horn gear diameter: 150mm/200mm, speed 1/2: 175rpm/131rpm, bobbin diameter: 55mm, bobbin height: 130mm, bobbin capacity: 265cm³. Including 2x change gears, 2x double gears, 28x bobbins, 28x thread tension springs, 2x take-off discs, 6x wooden drums, 8x carrier tubes, 2x braiding plates and one carrier guard. The machine has only been operated for a few thousand running meters and is therefore in very good, near-new condition. Documentation available. An on-site inspection is possible. Iodpfx Ajzqfx Deqceig

Condition: good (used), Year of construction: 2003, operating hours: 8,500 h, functionality: fully functional, Brückner RAM + SETEX Iiodpfx Aezphgneqcjg

Condition: ready for operation (used), Two Temafa bale opener lines are offered for bale opening, pneumatic conveying of fiber bales and processing of natural and synthetic fibers. 1. Bale opener: 1) Bale opener BÖ-KSP 0347, working width: 1600mm. 2) Rod conveyor table FTRY 0502, length: 5700mm, width: 1600mm. 3) Material extraction hopper, working width: 1600mm, pipe flange: 350mm. 4) AEG extraction fan, type: AM 160 MR 4, power: 11kW, speed: 1450rpm. 2. Bale opener: 1) Bale opener BÖ-KSP with Cleanmaster, working width: 1300mm. 2) Rod conveyor table, length: 5000mm, width: 1260mm. 3) Material diverter for feeding into the CMA or for direct discharge. 4) Cleanmaster (CMA) with infeed, tumbler and time-controlled discharge flap. 5) TV 300 extraction fan and auxiliary extraction fan for cleaning the CMA and for wool room extraction. 6) Control cabinet, year of manufacture: 1999, control system: Siemens S5 with Lauer terminal. Documentation available. The machines are available from April 2027. The machines can be purchased separately. An on-site inspection is possible. Iiedpoznx Nkefx Aqceg

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, overall weight: 2,500 kg, conveyor belt speed: 250 mm/s, conveyor belt width: 1,000 mm, temperature: 200 °C, machine/vehicle number: ST0403, production capacity: 240 unit/h, TECHNICAL DETAILS Iedpfxezmr Eco Aqcjig Number of conveyor belts: 1 Belt width: 1,000 mm Belt height: 830 mm Belt height adjustment: 50 mm Belt speed: 1–15 m/min Infeed length: 1,200 mm Length of heating zone: 3,000 mm Tunnel height: 100 mm Temperature: max. 200 °C Drying rate: 800–2,500 m³/min Outfeed length: 1,200 mm Output: max. 240 T-shirts/h MACHINE DETAILS Electrical voltage: 400 V AC Current: 16 A Mains frequency: 50/60 Hz Gas burner output: 1 × 55 kW Dimensions & Weight Dimensions (L x W x H): 5,400 x 1,300 x 1,700 mm Weight: 2,500 kg

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, total length: 3,000 mm, total width: 1,200 mm, total height: 1,400 mm, overall weight: 250 kg, TECHNICAL DETAILS Number of nozzles: 13 Spray area: 1 × 3 m Number of tank connections: 4 MACHINE DETAILS Voltage supply: 1 × 230 V + N + PE Fuse rating: 16 A Connected load: 0.9 kVA Dimensions & Weight Machine dimensions: 3,000 × 1,200 × 1,400 mm Iijdpfxszmr A Uo Aqcsg Machine weight: 250 kg

Year of construction: 2000, condition: ready for operation (used), 3 Dilo needle looms are offered. 1) Pre-needling and finish-needling machine Dilo, DILOOM OD-II HVL 55, year of manufacture: 2000, number of needle boards: 2, working width: 5500mm, max. stroke frequency: 1000strokes/min, needle beam stroke: 60mm, needle board width: 200mm each, needle distribution range: approx. 3000-5000needles/m. 2) Double needle loom Dilo, DI-LOOM OUG-II S50, year of manufacture: 2000, working width: 5000mm, number of needle boards: 4, needle beam stroke: 60mm, max. stroke frequency: 1200strokes/min, needle density: approx. 18000needles/linear m. 3) Pre-needling and finish-needling machine Dilo, DI-LOOM OD II 55, year of manufacture: 1998, working width: 5500mm, needling system: Downstroke, number of needle boards: 2, needle beam stroke: 60mm, max. stroke frequency: 1200strokes/min, needle board width: 200mm each. Inspection possible by appointment. Iiodozhntropfx Aqcog

Condition: excellent (used), A robust German machine from PROTOS Schuhmaschinen – W. Ullrich K.G., Frankfurt am Main, designed for creating durable markings, numbering, and printing using hot stamping. This device is used in the production of footwear, leather goods, belts, wallets, cases, and other products requiring aesthetic marking. The machine is equipped with an adjustable marking mechanism with interchangeable digits and a system for feeding hot stamping foil. Its stable construction ensures precise and repeatable operation. Technical specifications: Manufacturer: PROTOS Schuhmaschinen W. Ullrich K.G., Frankfurt am Main Model: TF1501 Country of origin: Germany Adjustable marking unit Numbering/digits for marking Foil feed for hot stamping Temperature control Foot control (pedal) Work table included Electrical power supply Applications: Natural and synthetic leather, Leather goods, Footwear, Textiles, Cardboard and paper, Plastics suitable for hot stamping. Iisdpfjzgui Dsx Aqcjg Condition: Used machine, in good visual condition. Condition matches the photos.

Condition: ready for operation (used), Four Nagel + Hermann transfer and setting machines for transfer motifs (rhinestone, hotfix or similar) are available. Production capacity: 3000elements/h, max. element size range: 2mm-8mm, rhinestone format: SS10-20, machine dimensions X/Y/Z: approx. 850mm/600mm/1000mm, weight: approx. 65kg. Including various spare parts and tools. Documentation available. An on-site inspection is possible. Iiodpfx Aezdumdoqceg

Condition: ready for operation (used), A Nagel + Hermann transfer and placement machine for transfer motifs (rhinestone, hotfix or similar) is available. Colors: unlimited, shapes: unlimited, production capacity: 5000elements/h, max. motif dimensions X/Y: 300mm/300mm, machine dimensions X/Y/Z: approx. 820mm/650mm/650mm, weight: approx. 120kg. Including PC notebook, CAD software, 4x conveyor plates, 2x mounting plates as well as various spare parts and tools. Documentation available. An on-site inspection is possible. Iodpszdul Tsfx Aqcjig

Condition: ready for operation (used), Four identical Nagel + Hermann transfer and placement machines for transfer motifs (rhinestone, hotfix or similar) are available. Colors: 6, shapes: 2, production capacity: 5000elements/h, machine dimensions X/Y/Z: approx. 2000mm/1050mm/1750mm, weight: approx. 320kg. Including PC, CAD software, 12x conveyor plates as well as various spare parts and tools. Documentation available. An on-site inspection is possible. Iiedpfx Aszdkp Uoqcjg

Condition: ready for operation (used), Two identical Nagel + Hermann transfer and setting machines for transfer motifs (rhinestone, hotfix, or similar) are available. Colors: 6, shapes: 2, production output (2-color): 8000elements/h, feed bowl diameter: 200mm. Machine dimensions X/Y/Z: approx. 2450mm/1100mm/1800mm, weight: approx. 400kg. Including PC, CAD program, 8x feed plates, 22 feed bowls, 4 rotary tables, as well as various spare parts and tools. Documentation available. An on-site inspection is possible. Iiodezdkp Iepfx Aqcog

Condition: ready for operation (used), Three identical Nagel + Hermann transfer and placement machines for transfer motifs (rhinestone, hotfix or similar) are available. Production capacity: 7000elements/h, round element diameter: 2mm/3mm/4mm/5mm/6mm/8mm. Including laptop, CAD software, feed plate, various tools and spare parts. Documentation available. An on-site inspection is possible. Iiodpfx Ajzdkpzeqcjg

Year of construction: 1990, condition: ready for operation (used), A fabric inspection machine is offered. Working width: approx. 2000mm, display: digital length counter, inspection table: integrated backlight, control: conventional via control cabinet, function: winding, unwinding and inspecting fabric webs, control: conventional. Equipped with illuminated transmission screen, digital meter counter, control cabinet with push-button control, guide and winding rollers. Weight: approx. 850kg, overall dimensions X/Y/Z: approx. 2800mm/1600mm/1900mm. Inspection possible by arrangement. Iijdszcfizspfx Aqcsg