TechnologieZentrumDortmund Management GmbH

Condition: new, Year of construction: 2026, load capacity: 7,000 kg, lifting height: 34,700 mm, total length: 10,060 mm, Rotating forklift Manitou MRT 3570 vision ES Drive Diesel Year built 2026 Lifting height (mm) 34,700 Itodpfx Adjy Tp N Isksg Lifting weight (kg) 7,000

Condition: used, Year of construction: 2022, load capacity: 4,990 kg, lifting height: 4,425 mm, fork length: 2,400 mm, total length: 4,311 mm, - Bedienung Sitzgerät - Lastabstand mm 525 mm - Achslast mit Last vorn/hinten kg 11475/1283 - Achslast ohne Last vorn/hinten kg 3814/3954 - Bereifung Superelastik - Spurweite vorn/hinten mm 1104/932 - Neigung Hubgerüst vorwärts/rückwärts α/β ° 7/5 - Sitzhöhe bezogen auf SIP (niedrige Variante) mm 1342 - Arbeitsgangbreite bei Palette 1000 x 1200 quer mm 4370 - Arbeitsgangbreite bei Palette 800 x 1200 längs mm 4570 - Wenderadius 2645 mm - Kleinster Drehpunktabstand 729 mm - Fahrgeschwindigkeit mit Last km/h 20 - Fahrgeschwindigkeit ohne Last km/h 20 - Hubgeschwindigkeit (Plus*//Standard-Performance) mit Last 0,39/0,31 - Hubgeschwindigkeit ohne Last m/s 0,45 - Senkgeschwindigkeit mit Last m/s 0,5 - Senkgeschwindigkeit ohne Last m/s 0,5 Itedpfx Aoy Tp Nzjdkeg - Zugkraft mit Last N 6750 - Zugkraft ohne Last N 7430 - Max. Zugkraft (Plus//Standard-Performance) mit Last N 22590/19000 - Max. Zugkraft (Plus//Standard-Performance) ohne Last N 22560/19090 - Steigfähigkeit mit Last % 8,9 - Steigfähigkeit ohne Last % 15,5 - Max. Steigfähigkeit (Plus//Standard-Performance) mit Last % 20,4/13,8 - Max. Steigfähigkeit (Plus//Standard-Performance) ohne Last % 27,5/27,5 - Beschleunigungszeit 15 m (Plus//Standard-Performance) mit Last s 6,3/7,4 - Beschleunigungszeit 15 m (Plus//Standard-Performance) ohne Last s 5,7/6,2 - Betriebsbremse Hydraulisch betätigte Lamellenbremse - Batteriespannung V 80 - Umschlagleistung (Plus//Standard-Performance) t/h 324/315 - Arbeitsdruck für Anbaugeräte bar 250 - Ölstrom für Anbaugeräte l 50 - Schalldruckpegel (Fahrerplatz) dB(A) 66 - Humanschwingung: Beschleunigung nach EN 13059 m/s2 0,42 - Anhängerkupplung, Art Bolzen

Condition: new, Year of construction: 2026, load capacity: 6,000 kg, lifting height: 29,900 mm, total length: 9,140 mm, Rotating forklift Manitou MRT 3060 Drive Diesel Year built 2026 Lifting height (mm) 29,900 Lifting weight (kg) 6,000 Isdpfey Tp Nuox Adkotg

Condition: new, Year of construction: 2026, load capacity: 6,000 kg, lifting height: 25,800 mm, total length: 9,050 mm, Rotating forklift Magni RTH 6.26 Drive Diesel Year built 2026 Itodpsy Tp Nnofx Adkjg Lifting height (mm) 25,800 Lifting weight (kg) 6,000

Condition: used, total length: 5,640 mm, Year of construction: 2022, load capacity: 5,000 kg, Crane JMG MC 22500RE Itodpey Tp Nhjfx Adkjg Drive Electric Year built 2022 Lifting weight (kg) 5,000

Condition: new, Year of construction: 2026, total length: 7,320 mm, Articulated telescopic work platform Ijdpfx Ajy Tp Nbodkotg Magni MHAB18RT Drive Diesel Year built 2026 Work height (mm) 18,110

Condition: excellent (used), Pressing area: 2200 x 1250 mm Iedpoy Tp Htsfx Adkotg Plates in like-new condition, electrically heated (2 x 5 kW). Test run can be arranged at any time.

Condition: used, mileage: 161,104 km, power: 96 kW (130.52 HP), first registration: 10/2022, fuel type: diesel, empty load weight: 2,173 kg, maximum load weight: 1,327 kg, overall weight: 3,500 kg, tire size: 235/65 R16, next inspection (TÜV): 05/2028, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 3, total length: 20,590 mm, total width: 25,470 mm, total height: 59,810 mm, Year of construction: 2022, front tire size: 235/65 R16, Equipment: ABS, air conditioning, airbag, central locking, cruise control, onboard computer, ABS, driver airbag, number of seats 3, ASR, hands-free car phone system, on-board computer, tinted glass, front and rear parking assist, electric windows left and right, 6 gears, manual transmission, high roof, air conditioning, Euro 6 engine, multifunction steering wheel, entertainment: radio, cruise control, central locking, heated windshield, leather steering wheel, wooden floor, interior trim, wide rear step, 270-degree gullwing doors, tie-down points, last service including timing belt replacement in 02/2026 at 151,593 kilometers. Itodpfx Adey Tp Hajksg

Condition: excellent (used), CNC lathe Hwacheon HI Tech 300 Year 2005 Fanuc 18iTB with Manual Guide 10-inch chuck Spindle bore 79mm Max turning length 800mm Max diameter 380mm Z-axis travel 820 Itsdpfjy Tp E Nox Adkjg Tailstock Chip conveyor Machine documentation Very good condition

Condition: used, Year of construction: 2016, Manufacturer : Thimonnier Model : THD 400 Year: 2016 Application: Filling pre-formed pouches or doypacks 4-station rotary turret · Solids & liquids · Atmospheric or vacuum Cycle machine – 4 stations Station 1 – Loading of sachets using a suction arm Station 2 – Opening of sachets (internal forceps + air blast) Station 3 – Filling (solid and liquid dosing) Station 4 – Sealing / closing (atmospheric or vacuum) Product discharge via flat belt conveyor Pouch sizes Max: 300 × 350 × 80 mm Min: 200 × 250 × 50 mm Other sizes available (requires replacement parts) Speed and dosage 100 kg/h (solid product) 4 to 10 bags/min depending on size Solid dosing: bowl/hopper + weighing unit 0.3–2.5 kg Liquid dosing: flow meter Submersible filling available Supply Electrical: 400 V 3-phase + N + T, 50 Hz, 8 kVA Pneumatic: 6–9 bar, 35 m³/h Water: 1–3 kg/cm², 250 L/h, free return General specifications Iodpey Tp D Esfx Adkstg Dimensions: 311 × 302 × 260 cm Weight: approx. 1,000 kg Material in contact with the product: 316 stainless steel Vacuum pump or venturi (vacuum option) Documentation available Video of workshop tests (on request) Full technical dossier (digital version) Spare parts

Condition: used, TECHNICA ZSM 5100 center grinder for long shafts max L = 1000 Centering bore diameter 3 - 60 mm, workpiece clamping range 4 - 220 mm, workpiece length 50 - 1000 mm, workpiece weight max. 120 kg, centering bore angle 60°, grinding head adjustement max. 160 mm, grinding spindle speed 10000 - 45000 rpm, dressing stroke of the grinding disc dressing unit max. 40 mm Machine under power in our warehouse Mimu Machine Tools Gussago BS Italy Itsdpfx Aoy Tp Dxsdksg

Condition: used, Year of construction: 2014, Working dimensions: X = 3425 mm, Y = 1287 mm, Z = 325 mm. Max. workpiece height: 180 mm. Max. clearance under the hood: Y = 1450 mm / Bumper version = 1370 mm. Includes CabinetControl Base, 1 machine license, and 1 office license. Milling head 7830, 1-stage, power 6.5 kW, air-cooled, n(max.) 1000 - 18000 min-1, infinitely adjustable. Max. power at 12000 min-1 to 18000 min-1 with HSK-F 63 tool holder, with collet chuck with HSK shank. Drilling unit 7884, 14 spindles, 10 vertical spindles individually accessible, arranged in an L-shape, 6 in the X direction and 4 in the Y direction. Drive power 3 kW, 32 mm pitch. Sawing unit: Integrated sawing unit for sawing/grooving in the X direction, n(max.) 1000 - 5650 min-1, infinitely adjustable. Tool holder: A = max. DM = 125 mm. Location: Supplier. Itjdpfxsy Tpz Rs Adksg

Condition: used, Year of construction: 2007, with edge gluing: workpiece thickness: 8 - 50 mm, edge thickness: 0.4 - 3 mm, fixed lengths: max. 3 x 45 mm, feed rate: 11 m/min, connection value: 10.5 kW, compressed air: 6 bar, weight: approx. 1250 kg, machine length: 3920 mm. Storage location: Supplier. Iedpoy Tpz Dsfx Adkstg

Condition: used, Year of construction: 1993, Working widths: 150 or 200 mm. Table on the surface grinding side (can be tilted downwards from 0 to 45°) and on the veneer grinding side: 280 x 1000 mm. Table in front of the belt tension roller: 400 x 300 mm. Connection power: 3 kW. Oscillation stroke: approx. 15 mm. Dust extraction connection diameter: 150 mm. Weight: approx. 400 kg. Itsdpfsy Tpzwjx Adkjg Storage location: Supplier.

Condition: used, Surface planer: Working width: 520 mm, Table length: 2200 mm, Spindle diameter: 120 mm, Number of knives: 4 pcs. Thickness planer: Table dimensions: 520 x 850 mm, Feed rate: 6.5 - 17 m/min. Iodpfx Adoy Tpzqekstg Location: Supplier.

Condition: used, Year of construction: 2010, Sliding carriage: 3000 mm CNC parallel guide, cutting width 1000 mm. Motor: 5.5 kW electric motor for height and swivel adjustment. Swivel range: 0.5 - 47°. Digital display for swivel angle and cutting height. Saw blade diameter: max. 550 mm. Cutting height: max. 200 mm. Prepared for a scoring saw. Control panel at eye level, swiveling. Front table, swiveling. Table extension 840 mm. Angle/miter fence 3200 mm. Iedpfxjy Tpzke Adketg Location: Supplier.

Condition: ready for operation (used), On offer here is a bellied welding machine from Seleco type Genesis. The device is in good condition and was still in use 2 weeks ago. The device is being sold without the hose package, which was stolen from me a few days ago. The device can be tested on site if the buyer brings a suitable hose package. 1x SELCO Genesis 260GSM 1x SELCO type WU 14 1x transport trolley !!!Without hose package, as shown!!! Welding current max. 260 A 260 A at 60% ED 201 A at 100%ED Remote control SELCO RC08 Space requirement L - 560 x W - 240 x H - 400 mm Weight approx. 37 kg Itjdpfx Ajy Tpzdodkjg

Condition: used, empty load weight: 6,580 kg, axle configuration: 3 axles, first registration: 06/2019, tire size: 385-65 R22.5-385-65 R22.5, Year of construction: 2019, mileage: 353,114 km, ref: F0900322 Equipment: * Air connection: Red/Yellow head, * Electrical connection: 1 x 15-pin + 2 x 7-pin, * ABS, * EBS, * Customs cable, * Document box, * Ferry lashing, * Side impact protection, * Insertion slot: 6, * Lifting odometer, * Wheel chock: 2, * Tool box: 2, * Spare wheel holder: 1, * Access ladder, * Rear door design: Rear portal doors, * Locking rods on rear doors: 4, * Sliding tarpaulin, * Tensioning rod for sliding tarpaulin, * Side sliding curtain, * Multilock, * Floor: Plywood floor, * Rail pocket left, * Rail pocket center, * Rail pocket right, * Rail depot: Right, * Customer labeling, * Insertion bar (wood): 32 VIN: WKESD00000900322 Tire dimension: 385-65 R22.5 Internal length: 13.62m Isdpfx Adey Tpyaokotg Width: 2.55m Internal width: 2.48m Height: 4.01m Internal height: 2.79m

Condition: used, empty load weight: 7,010 kg, axle configuration: 3 axles, first registration: 07/2012, next inspection (TÜV): 07/2026, tire size: 455-40 R22.5-455-40 R22.5, Year of construction: 2012, ref: F0542949 Equipment: * Air connection: Red/Yellow connector, * Electrical connection: 1 x 15-pole + 2 x 7-pole, * ABS, Itsdpfxoy Tpx Nj Adkeg * EBS, * Side impact protection, * Lift axle: 1, * Toolbox: 1, * Spare wheel holder: 1, * Rear door design: Rear portal doors, * Locking bars on rear doors: 4, * Sliding cover, * Side sliding tarpaulin, * Lifting roof, * Multilock, * Floor: Plywood floor, * Recessed strip (aluminum): 14 VIN: WKESD00000542949 Tire size: 455-40 R22.5 Internal length: 13.62 m Width: 2.55 m Internal width: 2.48 m Height: 4.09 m Internal height: 3 m

Condition: used, empty load weight: 6,350 kg, axle configuration: 3 axles, first registration: 03/2018, next inspection (TÜV): 03/2027, tire size: 385-65 R22.5-385-65 R22.5, Year of construction: 2018, Ref: F0816021 Equipment: * Air connection: Duomatic, * Electrical connection: 2 x 7-pin, * ABS, * EBS, * Side impact protection, * Tool box: 1, * Spare wheel holder: 1, Ijdpfx Aoy Tpx Ajdkotg * Rear door design: Rear portal doors, * Locking bars on rear doors: 4, * Sliding cover, * Side sliding tarpaulin, * Multilock, * Floor: Plywood floor, * Insertion strip (aluminum): 20 VIN: WKESD00000816021 Tire size: 385-65 R22.5 Internal length: 13.62 m Width: 2.55 m Internal width: 2.48 m Height: 4.04 m Internal height: 2.79 m

Condition: used, empty load weight: 6,820 kg, axle configuration: 3 axles, first registration: 08/2013, next inspection (TÜV): 03/2027, tire size: 455-40 R22.5-455-40 R22.5, Year of construction: 2013, ref: F0583923 Equipment: * Air connection: Red/Yellow connector, * Electrical connection: 1 x 15-pin + 2 x 7-pin, * ABS, * EBS, * Side impact protection, * Lift axle: 1, * Tool box: 1, * Spare wheel holder: 1, * Rear door design: Rear portal doors, * Locking bars on rear doors: 4, * Sliding cover, Itodoy Tpxvjpfx Adksg * Side sliding tarpaulin, * Lifting roof, * Multilock, * Floor: Plywood floor, * Recessed strip (aluminum): 40 VIN: WKESD00000583923 Tire size: 455-40 R22.5 Internal length: 13.62m Width: 2.55m Internal width: 2.48m Height: 4.09m Internal height: 3m

Condition: used, empty load weight: 6,820 kg, axle configuration: 3 axles, first registration: 12/2014, next inspection (TÜV): 02/2027, tire size: 455-40 R22.5-455-40 R22.5, Year of construction: 2014, ref: F0643034 Equipment: * Air connection: Red/Yellow connector, * Electrical connection: 1 x 15-pin + 2 x 7-pin, * ABS, * EBS, * Side impact protection, * Lift axle: 1, * Tool box: 1, Isdjy Tpxpjpfx Adkstg * Spare wheel holder: 1, * Rear door design: Rear portal doors, * Locking bars on rear doors: 4, * Sliding tarp, * Side sliding tarp, * Lifting roof, * Multilock, * Floor: Plywood floor, * Recessed strip (aluminum): 33 VIN: WKESD00000643034 Tire size: 455-40 R22.5 Internal length: 13.62m Width: 2.55m Internal width: 2.48m Height: 4.09m Internal height: 3m

Condition: used, empty load weight: 6,820 kg, axle configuration: 3 axles, first registration: 12/2014, next inspection (TÜV): 01/2027, tire size: 455-40 R22.5-455-40 R22.5, Year of construction: 2014, ref: F0643035 Equipment: * Air connection: Red/Yellow connector, * Electrical connection: 1 x 15-pin + 2 x 7-pin, * ABS, * EBS, * Side impact protection, * Lift axle: 1, * Tool box: 1, * Spare wheel holder: 1, * Rear door design: Rear portal doors, * Locking bars on rear doors: 4, * Sliding tarpaulin, * Side sliding tarpaulin, * Lifting roof, * Multilock, * Floor: Plywood floor, * Insertion strip (aluminum): 29 VIN: WKESD00000643035 Tire size: 455-40 R22.5 Internal length: 13.62m Width: 2.55m Ijdey Tpxiopfx Adketg Internal width: 2.48m Height: 4.09m Internal height: 3m

Condition: excellent (used), mileage: 262,000 km, power: 272 kW (369.82 HP), first registration: 05/2020, fuel type: diesel, axle configuration: 6x2, fuel: diesel, brakes: engine braking, color: black, gearing type: automatic, number of gears: 12, loading space length: 6,800 mm, loading space width: 2,500 mm, loading space height: 900 mm, Year of construction: 2020, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, differential lock, electric window regulation, fog lights, navigation system, onboard computer, parking air conditioner, power assisted steering, power mirror, seat heater, soot filter, spoiler, = Additional Options and Accessories = - 2-pedal control - Adaptive cruise control - Alarm system - Aluminum fuel tank - Heated mirrors - Brake booster - DAB radio - Roof spoiler - Remote central locking - Low noise - Speed limiter - Air conditioning - Alloy wheels - Air suspension - Air-suspended seats - Particle filter - Radio/CD player Iedey Tpxcopfx Adketg - Rain sensor - Rearview camera - Seat heating - Sun visor - Voice control - Lane keeping assist - Immobilizer - Toolbox - Xenon headlights - Power take-off (PTO) - Central lubrication = Notes = 6x2 Euro 6 D Rear axle: lift/steer axle Open cargo bed: 6.80 x 2.50 x 0.90 m HMF 3220-K6 + boom FJ600-K3 Hydraulically extendable in 6 stages Fly jib hydraulically extendable in 3 stages Total working height approx. 29 m Hydraulics to the end of the fly jib Including pallet forks 4-point outriggers Remote control Alcoa rims German registration In very good condition! Ready for immediate use = Additional Information = Axle configuration Front axle: Alloy wheels; Steerable Rear axle 1: Differential lock Rear axle 2: Alloy wheels; Lift axle; Steerable Weights Unladen weight: 17,919 kg Payload: 8,081 kg GVW: 26,000 kg Functional Body manufacturer: HMF 3220-K6 + Fly jib FJ600-K3 CE marking: yes Environmental Emissions class: Euro 6d Condition Technical condition: very good Optical condition: very good

Condition: good (used), mileage: 468,338 km, power: 290 kW (394.29 HP), first registration: 01/2019, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, loading space length: 6,230 mm, loading space width: 2,480 mm, loading space height: 2,380 mm, Year of construction: 2019, Equipment: AdBlue, Bluetooth, EBS, air conditioning, cruise control, electric window regulation, electronic stability program (ESP), fog lights, navigation system, power mirror, retarder, seat heater, soot filter, tail-lift, trailer coupling, - Aluminum fuel tank - Brake booster - Intarder - Refrigerator - Particle filter - Radio/CD player - Sunroof - Sleeper cab - Side door - Seat heating - Tool box Suspension: Air suspension Front axle: Steered Unladen weight: 9,800 kg Payload: 8,200 kg GVW: 18,000 kg MOT (Technical Inspection): valid until 01/2027 Technical condition: good Optical condition: good Vehicle number: 101 Mercedes Benz Actros 1840 StreamSpace 2.30 / 4x2 / Retarder / Full Air Suspension / Side guard / Tail lift Iedpfsy Tpw Sjx Adketg .: WDB96300310319007 MOT: 01/2027 Suspension: Air / Air (Full Air) Transmission: Automatic Air conditioning Retarder Engine brake Cruise control Auxiliary heater Refrigerator Distance warning assistant Lane keeping assist Navigation system Fixed trailer coupling Emission standard EURO 6 Truck Internal dimensions Length: 6.23 m Width: 2.48 m Height: 2.38 m Special equipment: Chassis cover, front axle load 8.0 t, driver's airbag, trailer brake 2-line, connections on the left, audio-navigation system Bluetooth comfort, compressed air connection in the cab, air horn, cab floor with engine tunnel 170 mm, fire extinguisher, tinted windshield, dangerous goods version ADR Type EX / II, luggage compartment on the upper rear wall, info display 12.7 cm with additional display, fuel tank: 500 L aluminum, cooler box / refrigerator, reinforced engine brake, spare wheel, retarder, acoustic reversing warning (external warning signal), switch for tail lift, interface for fleet management system, drawers under the handrail, seats in the cab: driver's seat, sprung comfort seat, external sun visor, side window sunblind, driver's door, 12V socket in the passenger footwell, additional 24V socket in the passenger footwell Additional equipment: Emission standard EURO 6, axle configuration: 4x2, Actros 4, trailer socket 24V / 15-pin, exhaust on the right outside, exterior mirrors electrically adjustable and heated, differential lock rear axle, compressed air tank steel, compressed air unit medium, driving assistance system: Attention Assist (fatigue detection sensor), driving assistance system: brake assistant (Active Brake Assist), driving assistance system: lane keeping assist, cab: width 2.30 m, cab: L StreamSpace, cab: sprung, comfort, suspension: air / air (full air), power windows, generator 100 A, transmission 12-speed - Type: G 211-12, urea tank (AdBlue): 60 L, rear axle bevel gear 440, body/structure: chassis, comfort lower bunk, comfort central locking system, communication interface, cooler shutter, steering pump regulated, 2-stage air compressor, engine 10.7 L - 290 kW R6 diesel (OM 470), engine compartment encapsulation, ramp mirrors, waste heat recovery, disc brakes front and rear axle, seat cover / upholstery: fabric, seats in the cab: passenger co-driver seat, seats in the cab: driver's seat backrest foldable, voltage converter 24V / 12V 10 A, front mud flaps, front axle stabilizer, storage compartment outside left, 24V socket in the cab, tachograph / EG control unit, door extension for cab, aerodynamic underbody fairing, front underrun protection, preparation for CB radio, preparation for toll collection, front axle with increased ground clearance, regulated water pump, permissible gross weight 18.00 t, auxiliary heater (water) No liability for printing and spelling errors.