Gmach GmbH

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, For sale is a fully automatic, professional Furnimate NAT-620-F line (company information provided at the end of the advertisement) for industrial production, designed for joining wood lengthwise using the finger jointing method – straight, mitered, and zigzag joints – with a maximum length of 6.6 m. Output: approximately 1500 linear meters per hour (depending on the cross-section of the material). The length can be automatically divided into 6 parts. Fully functional, in continuous use, and a demonstration of its capabilities is possible on-site at the production facility. High-quality Siemens control electronics. Used sparingly, only a few hours per week. VAT invoice 23%. Net price: PLN 215,000. Manufactured in Taiwan in 2018. In operation since 2019. All parts and sensors are readily available in both the Polish and international markets. Videos demonstrating the machine in operation can be found on the YouTube channel and the manufacturer's website. Godpfx Adezzw R Hetjug Furnimate Wood Working Machinery Co., Ltd. is a Taiwanese manufacturer specializing in advanced finger jointing line systems. Based in Taichung, the company has been providing solutions for the wood industry since the mid-1980s. Key products and offerings: Furnimate produces machines with varying degrees of automation, including: Fully automatic finger jointing lines: Ultra-fast, servo-type systems. Horizontal and inverter systems: Solutions tailored to different production needs. Automatic crosscut saws: Used for precise trimming of materials. Manual machines: Designed for smaller production facilities. Company Information: Location: No. 62, Lane 549, Sec. 2, Sanfeng Rd., Fengyuan Dist., Taichung City, Taiwan. Export: Furnimate is an active exporter, supplying machines to over 50 countries worldwide. If you have any questions, please contact us by phone or email.

Condition: excellent (used), Year of construction: 2018, Notch-tongue system Weinig GRECON Type ProfiJoint 10/6100 LI Gusdpfx Adszx Tddotjg

Condition: ready for operation (used), General tongue-and-groove joint Working width max. 1660 mm Milling height max. 200 mm Milling motor 14 kW A general tongue-and-groove joint can be used to join smaller, panel-like elements together to form a larger panel, or it can be used to create a continuous strand from smaller elements, which is then cut to the required length after the tongue-and-groove joint is formed. Gsdpfx Adozxma Sstjug

Condition: used, Year of construction: 1997, - Feeding and transport - Milling machine combination with glue application - Transfer station - Infeed station - End face press with stacking Gujdozuyw Ajpfx Adtsg Dovetail tenon machine Manufacturer: Grecon Year of manufacture: 1997 Space requirements for operation and maintenance Length 18500 mm Width 6500 mm Height 2000 mm Weight and floor load Total weight 10500 Kg Floor load dyn. 25 N/cm² Wood data Wood type: Softwood or hardwood Length (min/max) 150 / 2000 mm Width (min/max) 50 / 205 mm Height (min/max) 35 / 50 mm Output length (min/max) 3000 / 6000 mm Machine components Feeding and transport Conveyor belt Type: FB 600 / 1000 Powered conveyor belt with fixed and foldable side guides and a retractable stop for aligning the packages. Technical data Length 1100 mm Width 950 mm Height 1000 mm Power consumption 1.1 kW Feed speed 75 m/min Milling machine Turbo milling combination Type: FDL-F-205/600/500 Two combined milling machines in a heavy-duty design with adjustable tables as workpiece supports, guided by a stable combined ball bearing and roller guide. Each milling machine is equipped with a clamping station, the trimming unit, and the milling unit. Either the second milling machine or both milling machines are equipped with a glue application system. The milling machines can be equipped with a scoring saw. Belts between the milling machines minimize package transport times, thus achieving a fast throughput. A pneumatic vibrating device in the clamping station ensures even alignment of the wood. Horizontal and vertical pressure devices clamp the package. The trimming unit is used to cut a reference edge on the workpiece. This reference edge determines the length of the respective dovetail tenon profile and can be adjusted. The dovetailing is carried out by the milling unit, followed by glue application via a side jet or roller applicator. Technical data Power consumption 63 kW Compressed air consumption 350 NL/min Exhaust diameter 2 x 250 mm Exhaust volume 10600 m³/h Drive Motor 1: Table feed, milling table Manufacturer: SEW Power consumption 1.5 kW Speed 71 rpm Motor 2: Belt drive Manufacturer: SEW Power consumption 1.1 kW Speed 227 rpm Motor 3: Trimming unit motor Manufacturer: Walter Power consumption 5.5 kW Speed 2880 rpm Motor 4: Milling spindle motor Manufacturer: Behnke Power consumption 22.0 kW Speed 3000 rpm Transfer Transfer station Type: ÜL WB 600/1000 Transfer station designed in a robust welded construction with an infeed belt, alignment stop, cross-feed unit, turning device with turning brush, and an outfeed belt, as well as adjustment devices for optimal adaptation to different wood dimensions. The packages of workpieces, which have been milled, are transferred from the milling table of the dovetail tenon milling machine to the conveyor belt of the transfer station and aligned flush with a stop. The aligned wood package is moved transversely to the infeed direction into the area of the turning device by the cross-feed unit. The separation of the wood package is carried out either directly onto the outfeed belt or by turning it 90 degrees and aligning it with a fixed edge. The discharge edge can be adjusted to the wood dimension. The separated wood is transported to the infeed station via a fast-moving conveyor belt. Technical data Power consumption 2.5 kW Compressed air volume 12 m³/h Feed speed 75 m/min Infeed station Infeed station Type: EKK 205 Infeed station with a side chain guide for transporting the separated pieces of wood.

Condition: good (used), Year of construction: 2010, functionality: fully functional, milling height: 180 mm, WEINIG NKT Dovetail Grooving Line – Double Unit DP20 An industrial dovetail grooving and gluing machine – developed for maximum precision and efficiency. Technical specifications: Wood input length: min. 130 mm | max. 1000 mm Wood output length: min. 3700 mm | max. 7400 mm (half lengths possible!) Wood cross-section: min. 20 x 40 mm | max. 80 x 180 mm Cutter diameter: 370 mm Dovetail design: Vertical / Horizontal, 10/11 dovetails, 3.8 mm pitch Glue application: 2-sided, PVAC white glue Connection power: 80 kW Note: The machine is currently disassembled and is in our warehouse. An inspection is possible by appointment. Scope of supply: WEINIG NKT Double Unit DP20 including control unit Integrated gluing station for 2-sided application Operating manual & documentation Hydromat 17B (7 spindles) General information Manufacturer: Weinig AG Guodpfxsznum Ss Adtjg Model: Hydromat 17B // 7 spindles (various tools) Type: High-performance profiling milling machine / planing and rabbeting machine Year of manufacture: 1989 Operating voltage: 380 V / 50 Hz Bottom-Right-Left-Right-Left-Top-Bottom table, fixed Description Heavy-duty, high-performance planing and rabbeting machine made of vibration-damping and torsion-resistant cast iron components in a modular system. Designed for precise and economical woodworking with high continuous output. Mechanical feed, adjustable in the range of 5 – 35 m/min, feed motor 5.5 kW (7.5 HP). Surfacing table 2 m long, quick adjustment available. Chip removal for surfacing and jointing spindles, adjustment range 10 mm each. Technical data • Feed speed: 5 – 35 m/min, mechanical • Feed motor: 5.5 kW / 7.5 HP • Operating voltage: 380 V / 50 Hz • Table length: 2000 mm • Adjustment range of chip removal: 10 mm (surfacing and jointing side) • Machine design: Without counter bearing, in high-performance design

Condition: ready for operation (used), Year of construction: 2010, Fully automatic dovetail cutter system: Double-pack type Machine has been dismantled Machine will be inspected with functional guarantee Specifications: Wood input length: min. 200 mm max. 4000 mm Wood cross-section: min. 20 x 40 mm max. 80 x 220 mm Wood output length: 18,000 mm Max. wood cross-section with 10 mm dovetail size: hardwood 120 cm² softwood 150 cm² Dovetail design: vertical and horizontal Adhesive type: PUR Electrical power: Connection voltage: 400 V Gjdpfjznh Szex Adtsug Control voltage: 24 V 50 Hz System is completely wired up to the control cabinet. Dovetail length / optional wood cross-section and adhesive type can still be adjusted. Performance: 6 milling tables/min Working height: 960 mm Table width: 600 mm Adhesive application: double-sided application With continuous packaging

Condition: ready for operation (used), Compact Dovetail Jointing Machine Output: approx. 4-6 joints/min. For wood profiles with the following dimensions: Thickness: 30-120 mm Width: 75-250 mm Pressing force: 22.5 t Automatic glue application via 2 glue combs, designed for processing PUR glue. Spring-mounted with a safety cut-off system that immediately stops the milling and glue application feed in case of even the slightest load. All parts are chrome-plated. Electrical system with PLC Milling motor power: 22.00 kW Hydraulic unit: 29.50 kW Oil cooler: 0.75 kW Infeed drive: 1.50 kW Outfeed drive: 2.50 kW Cut-off saw: 3.00 kW Gusdpfxozmmr Rj Adtsg Total power consumption: 59.25 kW = 120 amps In the past, jöma has successfully delivered and commissioned 10 of these machines. We can supply all spare parts for the compact dovetail jointing machine. We, jöma, have been supplying and repairing Cook Bolinders machines for 30 years.

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 89257, pressing force: 60 t, input voltage: 380 V, total height: 2,000 mm, type of input current: three-phase, working height: 2,000 mm, total length: 9,500 mm, control cabinet width: 1,000 mm, total width: 2,000 mm, year of last overhaul: 2026, pressure: 100 bar, control voltage: 12 V, workpiece height (max.): 120 mm, rotational speed (max.): 6,000 rpm, air pressure: 8 bar, We offer this ready for use WEINIG Dimter HK200 finger jointing line, year of construction 1996. Guodpfx Aszatztsdtog If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Milling head FC-10KZ6: Milling spindle: 50 mm Motor: 18 kW Spindle speed: 6000 rpm Tool dimensions: 250/50 mm Dust extraction nozzle diameter: 150 mm Chipper: 300 mm x 8 mm Chipper motor: 6 kW - 3000 rpm Dust extraction nozzle diameter from chipper: 80 mm Working width of the table: 600 mm Board thickness: 20-50 mm Working height: 25 - 120 mm Length of glued board: 200 - 600 mm Table drive: electromechanical Feed rate: 3 - 30 m/min, steplessly controlled Glue applicator: special glue unit with comb Loading of glued boards: manual, onto a loading belt system Remaining operations: automatic Press FC-10PZ6/2: Width of glued board: 25 - 120 mm Thickness of glued board: 20 - 50 mm Length of finished board: 6000 +20 -50 mm Pressing: hydraulic Hydraulic cylinder: 100 mm Hydraulic unit: up to 100 bar Unit motor: 3 kW - 1500 rpm Cut-off saw: 400 mm Saw motor: 3.5 kW Set performance, depending on the material used: up to 4 cycles/min (up to 4 six-meter strips/min) Dimensions: Guodpfoy Ud Uuex Adtsg Length: 13600 mm Width: 3800 mm Height: 1850 mm

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Technical data: Wood infeed length: 150–700 mm Wood width: 40–150 mm Wood thickness: 20–50 mm Press length: 6100 mm Gusdoy N D A Uspfx Adteg Pressing force: 120 kN / 12 t Milling spindle power: 15 kW Chipper power: 5.5 kW Glue application system: Flankenjet / Glue nozzle Performance: Tenoner – 2 bundles per minute Press – 2 cycles per minute

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Finger Jointing Line GreCon Turbo-S 1000 Manufacturer: GreCon Model: Turbo-S 1000 Year of manufacture: 2007 Machine description: For sale: GreCon Turbo-S 1000 finger jointing line, year 2007, designed for efficient production of finger-jointed solid wood components. The Turbo-S 1000 is a well-known and proven GreCon solution for high output, precise finger profile machining and consistent joint quality. This machine is suitable for the production of structural timber, furniture components, joinery parts and solid wood elements for further processing. Depending on configuration, tooling and equipment, the line can process both softwood and hardwood. Technical data: - Input workpiece length: approx. 150 – 1000 mm - Working width: approx. 40 – 205 mm - Optional working width: up to approx. 225 mm - Working thickness: approx. 20 – 80 mm - Glue application system: FlankenJet - Number of press channels: 2 - Frequency-controlled feed - Material: softwood and hardwood - Machine type: high-performance finger jointing line - Application: production of finger-jointed solid wood components Features / advantages: - High production capacity - Excellent joint quality - Proven GreCon technology - Suitable for continuous industrial production - Compact and robust design - Good solution for joinery, furniture and structural timber production Guedpfoyu Up Isx Adtjg Condition: very good Note: Technical details may vary depending on the exact machine configuration, tooling, press length and installed options. Manufacturer material for the Turbo-S 1000 series also shows high line output depending on joint orientation, timber dimensions and press configuration.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Finger Jointing Line GreCon CombiPact Manufacturer: GreCon Model: CombiPact Year of manufacture: 2006 Machine description: For sale: GreCon CombiPact finger jointing line, year 2006, designed for the production of finger-jointed solid wood elements. This machine is a compact and efficient solution for woodworking companies producing structural timber, glued components and solid wood elements for further processing. The GreCon CombiPact is well known for its reliable construction, precise finger profile machining and consistent production quality. Suitable for processing softwood and hardwood, depending on tooling and machine configuration. Technical data: Gedpfx Aoyu Unwsdtoug - Input workpiece length: approx. 150 – 1000 mm - Working width: approx. 40 – 205 mm - Working thickness: up to approx. 80 mm - Pressing / output length: approx. 3000 – 6100 mm - Finger joint profile: typically 10/11 mm - Gluing system: automatic glue application system - Final press: included - Material: softwood and hardwood - Machine type: finger jointing line - Application: production of finger-jointed timber and solid wood components Features / advantages: - Compact design - High precision finger joint machining - Reliable and proven GreCon technology - Suitable for continuous production - Good solution for joinery, furniture and structural timber production Condition: very good Note: Technical details may vary depending on the exact machine configuration, tooling and installed options.

Condition: good (used), Year of construction: 1986, functionality: fully functional, Line for finger jointing (microjoints). The inverters in the control cabinets have been replaced with new ones. Gujdjynkzgspfx Adtog

Condition: like new (used), Year of construction: 2010, operating hours: 200 h, functionality: fully functional, Finger-jointing line, like new, only operated for 60 days. Gsdpfx Adsyl Nuastsug

Condition: ready for operation (used), Year of construction: 2023, 3-meter automatic wood length gluing press Gsdsylqc Espfx Adtjug

Condition: used, Year of construction: 2020, Working width from to 50 x 150 mm Gusdsyhq Umjpfx Adtsg Working height from to 20 - 50 mm

Condition: reconditioned (used), Year of construction: 2023, functionality: fully functional, MLKT tenoning machine automatic, after complete overhaul, with automatic glue feed Gusdjyhnpnjpfx Adteg

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, Auction of a Weinig finger jointing machine! Gjdsx Rbl Nepfx Adteug

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Set for micro-dovetail jointing for high-volume and mass production Features: – High-performance production line, – Heavy-duty working units, – High feed rates, – Accelerated handling movements ensure high throughput. Depending on the desired output, additional buffer conveyors can be integrated to speed up the production process. TENONER FC-10KZ-6 Specifications Values Milling spindle 50 x 210 mm; 5,500 rpm Spindle motor 18.5 kW Chipper saw (special) 300/60 x 8 mm Saw motor 6 kW Working table width 600 mm Workpiece package height 30 to 150 mm PRESS FC-10PZ6 Specifications Values Board width/thickness 30-150 mm / 20-70 mm Finished board length 6,000 mm Line capacity up to 15,000 linear meters/shift The following modifications and upgrades have been made to the machine: - New electrical installation - Machine controller replaced with SIEMENS SIMATIC S7 and SIEMENS SIMATIC HMI panel - New infeed table before the tenoners with buffering system - New board turning mechanism – side feeder after tenoners (chain-driven turning mechanism controlled by frequency inverter) - New chain feeder before the press (length 4,500 mm) - Additional pre-scoring aggregates for finger-joint gluing – furniture board installed at the tenoners Machine dimensions: Guedpfxsx Idl He Adteg 16.5 m x 5 m

Condition: used, Year of construction: 1996, functionality: fully functional, Semi-automatic F/J line with automatic glue application Infeed length 150-1200mm Infeed width up to 200mm Working height 900mm Guedjxxz Eispfx Adtsg Feeding package width 520mm Cutter spindle diameter 50mm Cutting tool diameter 160mm Press length from 4000mm to 6000mm Overall electrical supply ~38KW

Condition: excellent (used), DIMTER HK 400 – AUTOMATIC FINGER JOINTING LINE For sale is a fully automatic finger jointing line for wood, DIMTER Type HK 400 E/D. This is an advanced system designed to maximize efficiency and quality in the jointing of both hardwood and softwood. Guodpfxjxvniis Adtog

Condition: excellent (used), FAMAD PDFD-I Wood Jointing Line 1. FAMAD DFC-60M Milling and Tenoning Machine Unit Input element length 170-900mm Milling height 20-155mm Milled element package width 650mm Carriage operating speed: Work 10-23m/min Return 32m/min 2. PHSL Pressing Unit Glued element width 35-155mm Glued element thickness 20-70mm Glued element length min/max 4500-6600mm Godpfxew Iy Nye Adtoug Possibility of programming inter-cuts Line capacity up to 4000mb/shift 3. General information Length 15700mm Width 3350mm Power demand 48kw Year of production 2006 Very good condition

Condition: refurbished (used), Year of construction: 2007, The PDFD joining line, in its single-milling version, consists of two main units: a milling and tenoning machine, DFC 60M (where the tenons on the strip ends are machined), and a length joining press, PHSL, where the elements are joined into a strip with a length of up to 6.6 meters. Gsdpfjw Hrm Njx Adtoug Input package width for the milling and tenoning machine – 650 mm Width of glued elements – 30 ÷ 155 mm Length of glued elements – 170 ÷ 900 mm Thickness of glued elements – 20 ÷ 70 mm Compressed air consumption – 18 m³/h Working performance – cycles/min – approx. 2 (strip 6600) Length of the glued element – up to 5500 mm The machine is in excellent technical condition!

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, WORKING DIMENSION 250x150 mm MILLING MOTOR 50 HP Gjdpfx Aow E Etyedtsug HYDRAULIC POWER UNIT MOTOR 20 HP PUSHING FORCE 40T MAXIMUM WORKING SECTION 250x150 mm EXIT ROLLER CONVEYOR NOT INCLUDED

Condition: used, Price on request. Comprising: Minda grading line for stack and lamella dimensions Stack width: max. 1,200 mm Stack height: max. 1,200 mm Stack length: 2,000–5,000 mm Stack weight: max. 3 t Lamella width: 80–260 mm Lamella thickness: 23–80 mm (typically 46 mm in the rack) Cross-section: max. 80 x 260 mm = 208 cm² Performance of vacuum stacking with lifting column: Section I: 3 layers/min Section II: 2 layers/min Guedpowwg Amsfx Adtsg Finger jointing by Grecon Destacking, planing line and cross transfer platforms by Minda