Ordination Dr. B. Schneider

Condition: as good as new (ex-display), Year of construction: 2022, Features: - E-Control 20 Dual Screen with bending sequence simulation - 6-axis back gauge with 100 mm stroke (right ±50 mm) - E-Bend S sensor for thickness control on Z1 - Wila NSCR-II HC Premium table - Wila NSCL-II HC Premium tool holder - Pair of front sheet metal supports - Bending force: 500 kN - Usable bending length: 2,040 mm Hjdpfxjz A Tg Ds Ac Aent - Usable stroke: 300 mm - Maximum opening: 590 mm - Rapid approach speed: 160 mm/sec - Interface for Industry 4.0 - Standard tool kit

Condition: like new (used), functionality: fully functional, Weiler Primus Lead and Pull Spindle Bench Lathe – Like New Condition!!! Technical Data: Hsdpfx Acjz A Tgqj Aont >> Year of manufacture approx. 1990, machine no. 4472 >> Center height 120 mm >> Distance between centers 430 mm >> Speed: 60 - 3000 rpm in 18 gear stages >> Spindle bore 23 mm >> Short taper spindle head DIN 55027 >> Tailstock MK 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible threads: Metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 three-jaw chuck, 125 mm, like new, with 2 sets of jaws >> Collet chuck with collets from 2 mm to 12 mm, increasing in 1 mm increments >> Mulifix size A with 3 steel holders >> Change gears >> Fixed steady rest >> Faceplate >> Spindle guard >> Operating manual, electrical diagrams, and much more About the machine: A Weiler Primus Lead and Pull Spindle Bench Lathe with a workbench is offered in like-new condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This Primus model comes from the German Armed Forces, where it was used very little (almost new). This newer generation of Weiler lathes is very user-friendly and can produce surfaces that are as smooth as if they were ground. Take advantage of the opportunity to inspect this machine on-site and under power to convince yourself of its condition. Digital display available for an extra charge.

Condition: excellent (used), Year of construction: 2012, operating hours: 37,830 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 50 mm, displacement volume: 392 cm³, total length: 6,400 mm, total width: 1,950 mm, total height: 2,210 mm, overall weight: 12,140 kg, ARBURG Allrounder 630 S 2500-800 Stock No.: 503409 Manufacturer: ARBURG Type: Allrounder 630 S 2500-800 Control System: Selogica Year of Manufacture: 2012 Operating Hours: 37830 h Technical Data – Clamping Unit Clamping Force: 2500 kN Tie Bar Spacing h x v: 630 x 630 mm Platen Size h x v: 900 x 900 mm Minimum Mold Height: 300 mm Maximum Mold Height: 700 mm Maximum Platen Distance: 1300 mm Opening Stroke: 600 mm Ejector Stroke: 225 mm Ejector Force: 90 kN Centering of Moving Platen D: 160 mm Centering of Fixed Platen D: 160 mm Technical Data – Injection Unit Screw Diameter: 50 mm Displacement Volume: 392 ccm Injection Pressure: 2000 bar Screw Length: 20 l/d Screw Stroke: 200 mm Screw Speed: 60 rpm Screw Torque: 1000 N Hsdpoz A Tgkefx Ac Aent Free Injection Flow Rate: 300 g/s PS Number of Heating Zones: 8 Nozzle Distance: 400 mm Dimensions & Weight Machine Dimensions L x W x H: 6.4m x 1.95m x 2.21m Total Weight: 12140 KG Equipment Screen text in German Screen text in English CEE socket 16A Compact Flash interface for data set storage Hydraulic core pull 1x Air valve 2x Machine with water manifold Machine without material hopper Leveling elements EUROMAP 67 handling interface OPC interface Schuko socket 10A Selector unit Tool heating 12x

Condition: new, Year of construction: 2026, functionality: fully functional, power: 15 kW (20.39 HP), cutting height (max.): 175 mm, cutting width (max.): 820 mm, saw blade diameter: 550 mm, height adjustment type: pneumatic, saw blade bore: 80 mm, actuation type: electric, total length: 8,000 mm, total width: 1,510 mm, total height: 1,850 mm, overall weight: 2,600 kg, table height: 900 mm, Equipment: CE marking, rotational speed infinitely variable, saw blade guard, Longitudinal circular saws made in Germany! Cutting lengths: 2,200 - 11,200 mm Cutting widths: 420 - 3,000 mm Saw motor: 11 kW, optional 15 kW Max. cutting height: 175 mm Saw blade diameter: 450 - 550 mm Hjdpoz A Tgdofx Ac Aont Saw feed: Infinitely variable, from 0 - 80 m/min. Compressed air connection: 1/2", 6 bar Required air volume: approx. 3500 m³/h

Condition: reconditioned (used), Year of construction: 2018, machine/vehicle number: 0-261-71-2124, functionality: fully functional, total length: 6,075 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, The edge banding machine, after a complete overhaul, will be available at the end of October. TECHNICAL DATA: Element feeding and removal ■ Pressure beam with pressure belt ■ Preparation for connecting a return system ■ Variable feed rate: 8-18 m/min Hsdpfx Aez A Tf Tsc Aont ■ Automatically adjustable groove guide, height of the pressure beam, and pressure zone Edge banding ■ QA65 glue pot ■ EVA pre-melting unit: 8 kg/h Element finishing ■ Anti-adhesive and cleaning fluid ■ Corner rounding unit with a double profile FLEXTRIM ■ Trimming unit ■ Multifunctional unit for profiling with R-2 and R-1 tools ■ Edge milling unit with R-2 and R-1 tools ■ Flat profiling, polishing unit (top and bottom) Documentation ■ Selected languages: Croatian, German, English ■ Format: Data carrier + paper documentation General information ■ Control system: HOMAG POWERTOUCH control system ■ CE marking: YES ■ Operational status: end of October ■ Machine length: 6075 mm ■ Year: 2018 ■ Total processed length: 2.5 million meters

Condition: used, Year of construction: 2010, GLASTON BAVELLONI 37R2 S – Year 2010 Cutting table for monolithic glass Shape cutting Maximum dimensions: 3700 x 2600 mm Hedpez A Tftefx Ac Aont Thickness: 3-19 mm Speed: 200 m/min Precision: +/- 0.15 mm Power: 19 kW

Condition: used, Year of construction: 2007, total length: 6,750 mm, total width: 2,100 mm, total height: 2,020 mm, Colour: Grey Empty weight: 7.500 kg Price: On request - Year: 2007 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 602/02 - Drive system: Teach-in - Control system brand: Monforts - Control system type: Control System Euro Turn - Power [kW]: 55.0 - Centre height [mm]: 415 - Swing over bed [mm]: 830 - Carriage turning diameter [mm]: 540 - Distance between centres [mm]: 4000 - Spindle bore [mm]: 130 - Min. spindle speed [rpm]: 2 - Max. spindle speed [rpm]: 1600 - Options: Chip conveyor, Three-jaw chuck, Fixed steady, Quick-change tool post - Transport dimensions: 6750mm x 2100mm x 2020mm (l x w x h) - Transport weight [kg]: 7500kg Hnsdpoz A Tfmofx Ac Ajt - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, mileage: 691,543 km, power: 294 kW (399.73 HP), first registration: 02/2015, fuel type: diesel, empty load weight: 11,775 kg, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, Equipment: ABS, air conditioning, differential lock, onboard computer, soot filter, trailer coupling, Manufacturer: MAN - Type/Model: TGS 26.400 (6x2) 4 compartments / without measuring system - First registration: 16.02.2015 - Mileage: 691,543 km - Number of axles: 3 - Emission class: Euro 6 - Cab: M - Transmission: Automatic - Auxiliary brake: Retarder - Suspension: Air suspension - Lift axle - Steerable axle - Brakes: Disc brakes - Air conditioning - Length: 8900 mm - Width: 2550 mm - Height: 3150 mm - Unladen weight: 11,775 kg - Body manufacturer: Jansky - Tank material: Stainless steel - Total tank volume: 15,000 L - Tank compartments: 4 - CIP cleaning. Hjdoz A Tfaopfx Ac Aent

Condition: excellent (used), Year of construction: 2019, operating hours: 8,250 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, displacement volume: 392 cm³, total length: 4,110 mm, total width: 2,650 mm, total height: 4,810 mm, overall weight: 22,000 kg, Equipment: documentation/manual, ARBURG Allrounder 2000 T 2000-800 Stock No.: 503617 Manufacturer: ARBURG Type: Allrounder 2000 T 2000-800 Control: Selogica direct Year of Manufacture: 2019 Operating Hours: 8250 h Technical Data, Clamping Unit Clamping Force: 2000 kN Platen Size H x V: 1772 x 800 mm Minimum Mold Height: 400 mm Maximum Platen Distance: 900 mm Opening Stroke: 500 mm Rotary Table Diameter: 2000 mm Ejector Stroke: 175 mm Ejector Force: 45 kN Mold Weight: 6000 kg Technical Data, Injection Unit Screw Diameter: 50 mm Injection Volume: 392 ccm Injection Pressure: 2000 bar Screw Length: 20 l/d Screw Stroke: 200 mm Screw Speed: 60 rpm Screw Torque: 880 N Number of Heating Zones: 8 Nozzle Distance: 400 mm Dimensions & Weight Machine Dimensions L x W x H: 4.11m x 2.65m x 4.81m Total Weight: 22000KG Equipment Screen text in German Screen text in English CEE socket 16A Hydraulic core pull, 4x Hnjdpfxez A Tdpj Ac Ajt Air valve 1x Machine with rotary table Machine with water manifold Machine without material hopper Leveling elements EUROMAP 67 handling interface EUROMAP 73 interface OPC interface

Condition: used, Year of construction: 1995, functionality: fully functional, Screw compressor Manufacturer: RENNER, Type: RS 11-10 Year of manufacture: 1995 Hodpfxjz A Tdce Ac Aont Technical data Manufacturer: RENNER Type: RS 11-10 Year of manufacture: 1995 Delivery rate: 1500 l/min Max. operating pressure: 10 bar Motor power: 11 kW All information is subject to change without notice. A demonstration under power can be arranged at any time in our showroom.

Condition: used, mileage: 233,314 km, first registration: 05/2018, tire size: 225/65R16C, axle configuration: 4x2, color: other, gearing type: mechanical, emission class: euro6, suspension: steel, Year of construction: 2018, Equipment: ABS, cruise control, electric window regulation, power mirror, = Additional Options and Accessories = - CD player Hnedpfx Aez A Tc Eec Ajt - Spare key - Rearview camera - Stability control - Alternating current = Additional Information = Tire size: 225/65R16C Brakes: Disc brakes Suspension: Leaf spring suspension Front axle: Steered; Tire tread depth left: 6 mm; Tire tread depth right: 6 mm Rear axle: Tire tread depth left: 8 mm; Tire tread depth right: 8 mm Damage: None

Condition: good (used), mileage: 127,911 km, power: 250 kW (339.91 HP), first registration: 02/2017, fuel type: diesel, tire size: 385/55 R22,5, axle configuration: 4x2, fuel: diesel, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, loading space length: 8,950 mm, loading space width: 2,500 mm, loading space height: 2,650 mm, Year of construction: 2017, Equipment: air conditioning, central locking, cruise control, electric window regulation, power mirror, spoiler, tail-lift, = Additional Options and Accessories = - Aluminum fuel tank - Roof spoiler - Speed limiter - Tail lift 2000 kg - Radio - Rearview camera - Side door - Sun visor = Notes = Dhollandia DHLM.30 tailgate 2000 kg Load area: 225 cm Internal dimensions of the load area: L 895 x W 250 x H 265 Load platform control on the left + right Heated load area Low mileage Air conditioning Cruise control Sun visor Side door = Further Information = General Information Model year: 2026 Registration number: 44-BJF-8 Technical Information Hedpjz A Tcrofx Ac Ajnt Number of cylinders: 6 Engine displacement: 10,837 cc Axle Configuration Axle brand: Anders Brakes: Disc brakes Front axle: Tire size: 385/55 R22.5; Max. axle load: 9000 kg; Steered; Tire tread depth left: 45%; Tire tread depth right: 45%; Suspension: Leaf spring suspension Rear axle: Tire size: 315/70 R22.5; Dual tires; Max. axle load: 11500 kg; Tire tread depth left inside: 35%; Tire tread depth left outside: 35%; Tire tread depth right inside: 35%; Tire tread depth right outside: 35%; Suspension: Air suspension Weights Unladen weight: 11,811 kg Payload: 8,689 kg GVWR: 20,500 kg Functional Tail lift: Dhollandia DHLM.30, tailgate, 2000 kg Interior Interior: gray Product Safety Manufacturer: Nijwa Used Trucks Vormerij 12 7621HL BORNE, NL

Year of construction: 2018, condition: excellent (used), functionality: fully functional, Dust control/high-pressure misting system Hjdpfxez A Tcle Ac Aent 2 misting cannons, each with 30 nozzles Separate container with central unit, electrical system, IBC water tank, and high-pressure line.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 71193, TECHNICAL DETAILS MEASUREMENT DATA Measurement volume: 3,000 mm Accuracy: 0.045 mm MACHINE DETAILS Condition: Not inspected Installation dimensions L x W x H approx.: 1,000 x 500 x 1,000 mm (?) Weight approx.: 30 kg EQUIPMENT Hnsdpfx Acoz A Tcfo Aot Laptop and software as shown in the images (completeness not guaranteed) Transport case

Condition: excellent (used), Year of construction: 2020, operating hours: 8,344 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, displacement volume: 392 cm³, total length: 4,110 mm, total width: 2,650 mm, total height: 4,810 mm, overall weight: 22,000 kg, Equipment: documentation/manual, ARBURG Allrounder 2000 T 2000-800 Stock No.: 503618 Manufacturer: ARBURG Type: Allrounder 2000 T 2000-800 Control: Selogica direct Year of manufacture: 2020 Operating hours: 8344 h Hnedjz A Tb Uepfx Ac Ajt Technical data, clamping unit Clamping force: 2000 kN Platen size h x v: 1772 x 800 mm Minimum mold height: 400 mm Maximum mold opening: 900 mm Opening stroke: 500 mm Platen diameter: 2000 mm Ejector stroke: 175 mm Ejector force: 45 kN Mold weight: 6000 kg Technical data, injection unit Screw diameter: 50 mm Injection volume: 392 ccm Injection pressure: 2000 bar Screw length: 20 l/d Screw stroke: 200 mm Screw speed: 60 min Screw torque: 880 N Number of heating zones: 8 Nozzle stroke: 400 mm Dimensions & weight Machine dimensions L x W x H: 4.11 m x 2.65 m x 4.81 m Total weight: 22000 kg Equipment Screen text, German Screen text, English CEE socket 16A Hydraulic core pull, 4x Air valve 1x Machine with rotary platen Machine with water manifold Machine without material hopper Leveling elements EUROMAP 67 handling interface EUROMAP 73 interface OPC interface

Condition: used, Year of construction: 2011, functionality: fully functional, overall weight: 8,500 kg, Equipment: chip conveyor, Item no. 5.3-813 1 used 5-axis machining center Hermle B300, manufactured in 2001 Hodpfxjz A Tb Io Ac Asnt CNC control Heidenhain iTNC530 30-position automatic tool changer Chip conveyor CTS coolant system Technical data: X-axis travel: 800 mm Y-axis travel: 600 mm Z-axis travel: 500 mm Spindle taper: Spindle speed range: 15000 rpm Rapid traverse rate X, Y, Z: 30 m/min Table: 280 mm Number of tool positions in changer: 30 Approximate weight: 8500 kg Technical data, accessories, and machine description are non-binding.

Condition: good (used), mileage: 87,202 km, power: 95 kW (129.16 HP), first registration: 08/2022, fuel type: diesel, tire size: 235/65R16, axle configuration: 4x2, wheelbase: 3,300 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: other, number of seats: 3, total length: 5,930 mm, total width: 2,020 mm, total height: 2,500 mm, loading space length: 2,770 mm, loading space width: 1,520 mm, loading space height: 1,660 mm, Year of construction: 2022, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, power mirror, tail-lift, traction control, = Additional Options and Accessories = - Heated mirrors - Halogen lamp - None - Tail lift - Manual - Radio/cassette - Rearview camera - Fabric - Blind spot sensor - Partition = Notes = Configuration: 4x2, Tare weight: 2694 kg, Gross weight: 3500 kg, Cab type: Single cab, Cruise control, Air conditioning, Number of airbags: 1, Parking assistance: Front, Electric windows, Electric mirrors, Partition, Radio/cassette, Carplay, Color: White, Heated mirrors, Rearview camera, Lighting type: Halogen lamp, Bluetooth, Blind spot sensor, Engine power: 95 kW (127 hp), Fuel: Diesel, Euro: 6, Drive technology: Timing belt, Transmission type: Manual, Gears: 6, Power steering, ABS, ASR, Starter battery, Body type: extended and raised, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Number of seats: 3, Seat arrangement: 1+2, Seat upholstery: Fabric, Seat adjustment: Manual, Manufacturer of refrigeration unit: Carrier, Model of refrigeration unit: Xarios 200, Refrigeration unit: Compressor / electric, Heater, Type of cooling: Cooling and freezing, Day/night cooling: Day/night cooling, Tail lift, Tail lift design: Rear door, Load capacity of tail lift: 500 kg, Tail lift manufacturer: Dhollandia, Tail lift material: Aluminum, Tail lift size: 135x155, L2H2 Refrigerated van, Tail lift, Air conditioning, Day/Night cooling, Carrier, Good condition, Low mileage! Tire type: Summer tires = Additional Information = General Information Hnjdjz A Tbzspfx Ac Ajt Number of doors: 1 License plate: KLEYN1 Axle Configuration Tire size: 235/65R16 Brakes: Disc brakes Axle 1: Tire tread left: 5 mm; Tire tread right: 5 mm; Suspension: Coil suspension Axle 2: Tire tread left: 6 mm; Tire tread right: 7 mm; Suspension: Leaf suspension Weights Unladen weight: 2,694 kg Payload: 806 kg GVW: 3,500 kg Functional Tail lift: Dhollandia, Rear door, 500 kg Height of loading area: 66 cm Refrigeration unit: engine-driven Maintenance APK (Technical Inspection): valid until 08.2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 1 Financial Information Leasing price: €480 per month (delivery van, 72 months); Ask for more information and conditions.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 23,500 h, functionality: fully functional, machine/vehicle number: 8107000021B, spindle bore: 32 mm, spindle speed (max.): 8,500 rpm, overall weight: 4,300 kg, controller model: FANUC 32i MB, bar length: 3,200 mm, DMG MORI GILDEMEISTER SPRINT 32/5 – Short/Long Turning Automaton Well-maintained machine, low operating hours, including IEMCA BOSS 338/32 HD bar feeder (up to 3,200 mm bar length), year of manufacture 2016, as well as a conversion kit to a long turning automaton (Swisstype kit) for short and long turning on a single machine. Hnodpsz A Tbusfx Ac Aet Delivery terms: Free on truck Availability: Immediate - subject to agreement NOTE: The machine must be picked up on a fixed date in mid/late October 2026; we will provide the exact date in advance! Technical data: Control: FANUC 32i MB Operating hours recorded: 25,263 Spindle hours recorded: 22,772 MAIN SPINDLE DATA: Max. turning diameter: 32 mm (guide bushing bore: 38 mm) Stroke Z1: 100 mm Max. speed: 8,500 RPM Drive power S1: 5.5 kW TAILSTOCK SPINDLE DATA: Max. turning diameter: 32 mm (guide bushing bore: 38 mm) Stroke Z2: 200 mm Max. speed: 8,500 RPM Drive power S1: 2.2 kW AXIS DATA X1: Travel: 70 mm Max. speed: 40 m/min Max. acceleration: 5 m/s² AXIS DATA Y1: Travel: 405 mm Max. speed: 30 m/min Max. acceleration: 5 m/s² AXIS DATA X2: Travel: 300 mm Max. speed: 40 m/min Max. acceleration: 5 m/s² TOOL HOLDER DATA – SLIDE 1: Tool holder diameter: 25 mm Number of fixed tools for external machining: 6 Tool holder size: 16 × 16 mm Number of driven tools: 4 Collet type: ESX20 TOOL HOLDER DATA – SLIDE 2: Number of fixed tools for internal machining: 4 Tool holder diameter: 25 mm Scope of delivery: IEMCA BOSS 338/32 HD bar feeder (up to 3,200 mm bar length), year of manufacture 2016 Chip conveyor Available manuals Accessories as shown in the pictures Dimensions & Weight Footprint (L x W x H): approx. 7500 x 1600 x 2500 mm Weight: approx. 4300 kg Attention: Disc damaged! If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional notes: ► Upon request, we can offer transport to your destination. ► The goods are sold without any warranty. ► Technical data is subject to change.

Condition: good (used), mileage: 205,087 km, power: 84 kW (114.21 HP), first registration: 07/2020, fuel type: diesel, tire size: 235/65R16, axle configuration: 4x2, wheelbase: 3,670 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 6, total length: 6,100 mm, total width: 2,020 mm, total height: 2,700 mm, loading space length: 2,300 mm, loading space width: 1,780 mm, loading space height: 1,920 mm, Year of construction: 2020, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, electric window regulation, navigation system, power mirror, traction control, trailer coupling, = Additional Options and Accessories = - Heated mirrors - Halogen lamp - None - Manual - Radio/cassette - Rear view camera - Fabric - Blind spot sensor - Partition = Notes = Configuration: 4x2, Payload: 1145 kg, Unladen weight: 2355 kg, Gross vehicle weight: 3500 kg, Trailer load, unbraked: 750 kg, Trailer load, center axle, braked: 2000 kg, Tow hitch, Cab type: Double cab, Air conditioning, Number of airbags: 1, Parking assist: Front and rear, Electric windows, Electric mirrors, Partition, Radio/cassette, Carplay, GPS navigation, Color: White, Maintenance manual, Heated mirrors, Rear view camera, Lighting type: Halogen lamp, Air conditioning, Bluetooth, Blind spot sensor, Engine power: 84 kW (113 hp), Fuel: Diesel, Euro: 6, Drive technology: Timing chain, Transmission type: Automatic, Power steering, ABS, ASR, Starter battery, Body type: Extended and raised, Side paneling, Rear step, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Seats: 6, Seat arrangement: 1+2+3, Seat covering: Fabric, Seat adjustment: Manual, L2H2 Double Cab Air Conditioning Automatic Mbux Camera Tow Hitch Sidebars 1st Owner Service History, Spare wheel, Tire type: Winter tires = Additional Information = General Information Number of doors: 1 License plate: VGK-38-Z Axle Configuration Tire size: 235/65R16 Brakes: Disc brakes Suspension: Leaf spring suspension Axle 1: Tire tread depth left: 5 mm; Tire tread depth right: 5 mm Axle 2: Tire tread depth left: 3 mm; Tire tread depth right: 3 mm Weights Unladen weight: 2,355 kg Payload: 1,145 kg GVW: 3,500 kg Hodpfxoz A Tbno Ac Aent Functional Loading area height: 62 cm Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial Information Leasing price: 335 € per month (delivery van, 72 months); Ask for more information and conditions.

Condition: good (used), mileage: 119,901 km, power: 92 kW (125.09 HP), first registration: 01/2020, fuel type: diesel, tire size: 205/65R16, axle configuration: 4x2, wheelbase: 3,100 mm, fuel: diesel, color: silver, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 2, total length: 4,610 mm, total width: 1,920 mm, total height: 1,900 mm, loading space length: 2,160 mm, loading space width: 1,620 mm, loading space height: 1,400 mm, Year of construction: 2020, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking heater, power mirror, traction control, = Additional Options and Accessories = - Halogen lamp - None - Manual - Radio/cassette - Rear view camera - Fabric - Partition = Notes = Hodez A Tbhopfx Ac Aont Configuration: 4x2, Payload: 1268 kg, Tare weight: 1692 kg, Gross vehicle weight: 2960 kg, Trailer load, unbraked: 750 kg, Trailer load, center axle, braked: 2000 kg, Type of cab: Single cab, Cruise control, Air conditioning, Number of airbags: 2, Auxiliary heating, Parking assistance: Rear, Electric windows, Electric mirrors, Partition, Radio/cassette, GPS navigation, Color: Silver, Metallic, Maintenance manual, Rear view camera, Lighting type: Halogen lamp, Bluetooth, Engine power: 92 kW (123 hp), Fuel: Diesel, Euro: 6, Drive technology: Timing chain, Transmission type: Manual gearbox, Gears: 6, Power steering, ABS, ASR, Starter battery, Body type: Standard, Side walls clad, Roof rack: None, Side doors: 1, Rear closure: Tail lift, Central locking, Seats: 2, Seat configuration: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual, L1H1, air conditioning, navigation, parking distance control, camera, spare wheel, Tire type: All-season tires = Further Information = General Information Number of doors: 1 Registration number: VDX-36-J Axle Configuration Tire size: 205/65R16 Brakes: Disc brakes Suspension: Coil spring suspension Axle 1: Tire tread depth left: 6 mm; Tire tread depth right: 5 mm Axle 2: Tire tread depth left: 6 mm; Tire tread depth right: 5 mm Weights Unladen weight: 1,692 kg Payload: 1,268 kg GVW: 2,960 kg Functional Loading area height: 55 cm Maintenance APK (Periodic Vehicle Inspection): valid until 11.2026 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 3 Financial Information Leasing price: €243 per month (van, 72 months); Ask for further information and conditions.

Condition: used, axle configuration: 3 axles, first registration: 01/2007, tire size: 385/65 R22.5, color: other, Year of construction: 2007, Axle configuration Tire size: 385/65 R22.5 Axle brand: BPW Brakes: Disc brakes Rear axle 1: Lift axle; tire tread depth left: 6.5 mm; tire tread depth right: 4 mm Rear axle 2: tire tread depth left: 5 mm; tire tread depth right: 2.5 mm Rear axle 3: tire tread depth left: 10.5 mm; tire tread depth right: 5 mm Weights Unladen weight: 6,380 kg Payload: 32,620 kg GVWR: 39,000 kg Condition Damage: none Hjdpfx Acoz A Tbbs Aont

Condition: good (used), mileage: 203,071 km, power: 110 kW (149.56 HP), first registration: 07/2023, fuel type: diesel, tire size: 225/65R16, axle configuration: 4x2, wheelbase: 3,920 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: other, number of seats: 2, total length: 6,230 mm, total width: 2,020 mm, total height: 2,640 mm, loading space length: 3,320 mm, loading space width: 1,780 mm, loading space height: 1,920 mm, Year of construction: 2023, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, tail-lift, traction control, = Additional Options and Accessories = - Tachograph (driver's control unit) - Halogen lamp - None - Tail lift - Manual - Radio/cassette - Rear view camera - Lane keeping assist - Fabric - Partition = Notes = Configuration: 4x2, Payload: 1408 kg, Unladen weight: 2092 kg, Gross vehicle weight: 3500 kg, Trailer load, unbraked: 750 kg, Trailer load, center axle, braked: 2000 kg, Cab type: Single cab, Cruise control, Tachograph (driver's control unit), Air conditioning, Number of airbags: 1, Parking assistance: None, Electric windows, Electric mirrors, Partition, Radio/cassette, Carplay, GPS navigation, Color: White, Rear view camera, Lighting type: Halogen lamp, Lane keeping assist, Air conditioning, Bluetooth, Engine power: 110 kW (148 hp), Fuel: Diesel, Euro: 6, Drive technology: Timing chain, Transmission type: Automatic, Power steering, ABS, ASR, Starter battery, Body type: extended and raised, Side paneling, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Number of seats: 2, Seat arrangement: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual, Tail lift, Tail lift design: Rear door, Tail lift load capacity: 500 kg, Tail lift manufacturer: Anteo, Tail lift material: Aluminum, Tail lift size: 140x140, ac automatic tail lift cruise control EURO6 original NL carplay camera, Tire type: Summer tires = Additional Information = General Information Hjdpfxsz A Ta Ro Ac Ajnt Number of doors: 1 License plate: VTL-90-G Axle Configuration Tire size: 225/65R16 Brakes: Disc brakes Axle 1: Tire tread depth left: 5 mm; Tire tread depth right: 5 mm; Suspension: Coil spring suspension Axle 2: Tire tread depth left: 4 mm; Tire tread depth right: 4 mm; Suspension: Leaf spring suspension Weights Unladen weight: 2,092 kg Payload: 1,408 kg GVW: 3,500 kg Functional Tail lift: Anteo, Rear door, 500 kg Height of loading area: 61 cm Maintenance APK (Technical Inspection): valid until 05/2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial Information Leasing price: €417 per month (delivery van, 72 months); Please inquire for further information and conditions.

Condition: good (used), mileage: 41,352 km, power: 103 kW (140.04 HP), first registration: 02/2024, fuel type: diesel, tire size: 205/75R16, axle configuration: 4x2, wheelbase: 3,640 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: other, number of seats: 7, total length: 6,170 mm, total width: 2,100 mm, total height: 2,580 mm, loading space length: 2,700 mm, loading space width: 2,040 mm, loading space height: 400 mm, Year of construction: 2024, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, traction control, trailer coupling, = Additional options and accessories = - Heated mirrors - Halogen lamp - None - Manual - Radio/cassette - Fabric = Notes = Configuration: 4x2, Payload: 1406 kg, Unladen weight: 2094 kg, Gross vehicle weight: 3500 kg, Trailer load, unbraked: 750 kg, Trailer load, center axle, braked: 2800 kg, Trailer coupling, Type of cabin: Double cab, Cruise control, Air conditioning, Number of airbags: 2, Parking assistance: None, Electric windows, Electric mirrors, Radio/cassette, Carplay, GPS navigation, Color: White, Maintenance manual, Heated mirrors, Type of lighting: Halogen lamp, Bluetooth, Engine power: 103 kW (138 hp), Fuel: Diesel, Euro: 6, Drive technology: Timing belt, Type of transmission: Manual, Gears: 6, Power steering, ABS, ASR, Starter battery, Body type: additionally extended, Roof rack: None, Side doors: 2, Side windows: 2, Rear closure: Tail lift, Central locking, Number of seats: 7, Seat arrangement: 1+2+4, Seat cover: Fabric, Seat adjustment: Manual, L3 Double Cab Open-Load Bed 2800Kg-Tow Hitch NAP Euro6 140Hp BPM-Free!, Tire type: All-season tires = Additional information = General information Number of doors: 2 License plate: VZV-24-K Axle configuration Tire size: 205/75R16 Brakes: Disc brakes Axle 1: Tire tread left: 4 mm; Tire tread right: 4 mm; Suspension: Coil spring suspension Axle 2: Tire tread left: 3 mm; Tire tread right: 2 mm; Suspension: Leaf spring suspension Weights Unladen weight: 2,094 kg Payload: 1,406 kg GVW: 3,500 kg Functional Height of loading area: 97 cm Maintenance APK (Technical inspection): valid until 02/2027 Hodpfx Aoz A Ta Dec Asnt Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial information Leasing price: €528 per month (delivery van, 72 months); Ask for more information and conditions.

Condition: used, axle configuration: 3 axles, first registration: 01/2023, tire size: 385/65 R22.5, color: other, Year of construction: 2023, = Additional options and accessories = - vehicles.accessories.coil Hnedjz A Tawopfx Ac Ast = Further information = Tire size: 385/65 R22.5 Axle brand: Anders Brakes: Disc brakes Rear axle 1: Tire tread depth left: 9 mm; Tire tread depth right: 9 mm Rear axle 2: Tire tread depth left: 14 mm; Tire tread depth right: 15 mm Rear axle 3: Tire tread depth left: 13 mm; Tire tread depth right: 9 mm Damage: None

Condition: used, mileage: 176,000 km, power: 110 kW (149.56 HP), first registration: 08/2012, fuel type: diesel, overall weight: 7,500 kg, color: white, gearing type: automatic, number of seats: 3, total length: 8,150 mm, total width: 2,550 mm, total height: 3,500 mm, Equipment: air conditioning, central locking, tail-lift, Equipment: Tail lift * Power steering * Partition * Central locking Climate control: Automatic climate control Sörensen tail lift Vehicle dimensions: L 8.15 m, W 2.55 m, H 3.5 m Payload: 3500 kg The vehicle is in very good condition! For export customers only! Hodjz A Taqopfx Ac Asnt Price is fixed.