Christian Hannker Vermietung

Condition: used, Year of construction: 2007, x-travel 635 mm y-travel 510 mm z-travel 460 mm control iTNC 530 Heidenhain power capacity - main spindel 13 / 9 kW turning speed range - main spindle 20 - 10.000 min/-1 Torque 83 / 57 Nm tool taper SK 40 tension force 10 kN table surface area 790 x 560 mm number of T-slots 4 + 1 T-slot - width 4 x 14H12 / 1 x 14H7 mm T-slot - distance 100 mm max. table load 600 kg table height over floor 720 mm Hnedpfoyaci Hex Ahuog number of toolpositions 30 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6 kg Total weight, approx. max. 60 kg feed speeds max. 20.000 mm/min Feed force 5 kN input unit 0,01 mm rapid traverse 30 m/min total power requirement 20 kVA weight of the machine ca. 4,1 t dimensions of the machine ca. 4,5 x 4,0 x 2,8 m CNC-Machining Center Vertikal DECKEL MAHO - DMC 635 V - Spindle-Runtime only approx. 7.883h - Power-On approx. 23.023h

Condition: good (used), Year of construction: 2002, operating hours: 24,396 h, functionality: fully functional, travel distance X-axis: 640 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 70 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, nominal power (apparent): 39 kVA, controller manufacturer: Heidenhain, controller model: iTNC 530, table width: 600 mm, table length: 850 mm, table load: 600 kg, overall weight: 7,000 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Our 4-axis machining center DMG (DMC 64 V linear) is currently for sale. • Control system: Heidenhain iTNC 530 Hnodpjyacitsfx Ahusg • The machine is in good condition, fully operational, and can be inspected under power on site. • The machine is equipped with a full-fledged 4th NC axis (rotary table by Nikken). • The machine has an additional M-function: "Compressed air cooling through the spindle." • Chip conveyor included. • We have a factory-overhauled milling spindle in stock as a spare part, which can be purchased for an additional charge if needed. • The tools and clamping devices shown in the pictures are not included in the sale. • We are extremely satisfied with the machine’s precision and reliability. • The machine is available at short notice. • Dismantling and loading of the machine can be organized by us upon request for an additional fee.

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, spindle speed (max.): 12,000 rpm, spindle motor power: 25,000 W, number of axes: 5, This 5-axis DMG DECKEL MAHO DMC 60U RS5 was manufactured in 2004. Ideal for precision vertical machining, this used machine represents a valuable addition to any workshop. Consider the opportunity to buy this DMG DECKEL MAHO DMC 60U RS5 vertical machining centre. Contact us for more information. Additional equipment • Tool Changer & Magazine: Horizontal Double Gripper / Magazine Type: Chain Magazine / Capacity: 60 Tool Places / Tool Clamping: According to DIN 69872 / Tool Breakage Control: Mechanical Version • Coolant Tank: 900 L • IKZ: Form AD with Paper Band Filter • Measuring Probe: Heidenhain TS 641 (Infrared) • Tool Measurement: Blum Laser for Tool Length & Diameter Measurement Horizontal/Vertical • Rotating Viewing Window Machine Benefits Hnodoyaam Ajpfx Ahusg Technical Machine Benefits • Production hours: 54347 operating hours, 3500 spindle hours • Universal milling head with controlled b-axis • Very well maintained machine operated for high-end applications • Spindle replacement in 2021 at a cost of approximately 40000 euros • Checkbook maintained Extra Information Disc changer and 4 pallets are included Control 3D Haidenhein contouring control "Millplus IT with Millplus IT handwheel" Serviced regularly... excellent condition... new spindle has 3,500 hours

Condition: used, Year of construction: 1989, x-travel 650 mm y-travel 410 mm z-travel 450 mm Hjdsx U A Rnspfx Ahusng travel x vor 1000 mm control mc4va

Condition: good (used), functionality: fully functional, machine/vehicle number: 288-40003902, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, total height: 2,500 mm, total length: 5,000 mm, total width: 3,500 mm, table width: 500 mm, table length: 630 mm, DMG DMC 80 H Hi-Dyn RS4 For sale is a horizontal machining center DMC 80 H hi-dyn RS4. The machine is in good condition. Technical Specifications Travel distances: X-axis: 800 mm Y-axis: 800 mm Z-axis: 800 mm Table data: Table size: approx. 630 × 500 mm Max. workpiece weight: ~1,200–1,400 kg Rotary table: 4th axis, 360° continuous Spindle: Direct drive, liquid-cooled Speed ranges: Automatic mode: 0–6,000 rpm Setup mode: 0–800 rpm Manual mode: 0–5,000 rpm Max. speed: up to 8,000 rpm Spindle power: approx. 20 kW Torque: S1 – 100% duty cycle On request, dismantling, loading, and transport within Europe can be organized for an additional charge. Prices are subject to VAT. Hnjdpjx Uq Saofx Ahujg Viewing is possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell? For further information or contact options, visit our website.

Condition: good (used), Year of construction: 2004, operating hours: 21,000 h, Hurco 3 axis vertical machining center in good condition with ca 21000 operating hours. Ready for immediate delivery (dismantled and transport ready). Cnc control Hurco Ultimax X-axis 600 mm Y-axis 355 mm Z-axis 455mm Hnsdpfx Ajx Uqm Djhuog Motor 7.4 KVA Frequency 50 Hz Full load 13 KVA AC volts 3 phase 400 Capacity Tool Magazine 16 positions Type of tool holder SK40 Max spindle speed: 8000 rpm Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: good (used), Year of construction: 1995, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, x-travel 1000 mm y-travel 600 mm z-travel 600 mm Control: Heidenhain TNC 426 Spindle nose: 100–700 mm Hodpfjx T N R Sox Ahusng Work table: 1,080 x 580 mm Max. workpiece weight: 550 kg T-slots: 7 pcs. T-slot width: 14 mm Tool magazine with 36 positions Max. tool weight: 8 kg Max. tool length: 340 mm Machine weight approx. 6.2 t Space requirement approx. 4,790 x 5,330 x 2,905 mm

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : BBT 30 (Big-Plus) - Spindle power : 12 [kW] - Spindle speeds : 10000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 700/400/330 [mm] - Rapid traverses rates (X/Y/Z) : 54 [m/min] - Cutting feed rates (X/Y/Z) : 1-30000 [mm/min] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 21 TABLE - Table dimensions : 850 x 410 [mm] - Maximum weight upon table : 300 [kg] - Distance table / spindle nose (min./max.) : 250-580 [mm] POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 2165 X 2087 [mm] - Machine height : 2345 [mm] - Machine weight : 2000 [kg] MACHINE HOURS - Number of working hours : 3207 [h] EQUIPMENT - CNC : Fanuc 31i model B5 - 3 colors status lamp Hnodsx Tvizspfx Ahuog DIVIDING UNIT * manufacturer : Häberle * model : DTTiB * travel 4th axis : 360 [°] * indexing precision 4th axis : 0.001 [°] * travel 5th axis : -7/+100 [°] * indexing precision 5th axis : 0.001 [°] * tightening type : Pneumatique - Coolant tank * with high-pressure pump : 15 [bars] - Coolant through spindle - Chips conveyor : ARRIERE - Tool probe : Renishaw - Workpiece probe : Renishaw - Electric transformer - Milling vice - Tool-holders

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 18 m/min, rapid traverse Y-axis: 18 m/min, rapid traverse Z-axis: 18 m/min, controller model: FANUC, total length: 1,850 mm, total width: 1,850 mm, spindle motor power: 7,500 W, spindle nose: BT 40, Equipment: chip conveyor, X axis mm 610 Y axis mm 305 Hnedpox Tuwwsfx Ahuog Z axis mm 460 Table Dimensions mm 700 x 308 Spindle Rotation speed rpm 10,000 Spindle taper No. 40 Feed rates Rapid traverse X/Y/Z m/min 18/18/18 Working feed rate mm/min 1–10,000 Tool Changer System Tool holder BT-40 Tool magazine capacity 24 tools Power Spindle motor kW 7.5 Dimensions Machine height mm 2,400 Installation area mm 1,850 x 1,850 Machine weight kg 2,500

Condition: defective spare-parts repository (used), Year of construction: 1985, functionality: not functional, machine/vehicle number: 152 41 80 960, For sale is a Mikron WF 41 C. Hedpfxox Tr Sxs Ahuong The machine is not functional. The following faults are present: Fault 1: No data transfer to the NC interface Fault 2: NC transmitter line defective The machine is sold for self-collection at €1000. Loading is possible upon prior arrangement and at additional cost.

Condition: excellent (used), Year of construction: 2016, DMG Mori Ecomill 600 V Year of manufacture: 2016 X-axis travel: 600 mm Y-axis travel: 560 mm Z-axis travel: 210 mm Control: Siemens 840D SolutionLine Spindle taper: SK 40 Hnedpfx Ahsx Tn R Djusg Spindle speed: 12,000 rpm Through-spindle coolant (IKZ) Chip conveyor Table size X: 900 mm Table size Y: 560 mm Max. workpiece weight: 400 kg Tool changer: 30 positions Feed rate: 30,000 mm/min

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 17 kVA, torque: 83 Nm, controller manufacturer: Heidenhain, controller model: Heidenhain TNC 620, total height: 2,665 mm, total length: 3,250 mm, total width: 2,779 mm, table width: 560 mm, table length: 1,200 mm, table load: 720 kg, overall weight: 4,100 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 9,000 rpm, number of spindles: 1, number of slots in tool magazine: 20, tool length: 300 mm, tool diameter: 80 mm, tool weight: 6,000 g, Equipment: documentation/manual, rotational speed infinitely variable, Used DMC 1035 V eco for sale – High-performance vertical machining center Upgrade your manufacturing processes with this robust and powerful DMC 1035 V eco from DMG MORI! This vertical machining center is ideal for a wide range of milling tasks and offers outstanding performance when machining a wide variety of materials. Key Features: High rigidity and stability: Ensures precise machining results and a long service life. Large work area: Provides sufficient space for machining large workpieces. High spindle speed: Enables fast and efficient machining processes. Robust construction: Guarantees a long service life and reliable performance. CNC control: Equipped with a user-friendly CNC control for easy programming and operation. Additional Information: Hnodpfex Tg S Tsx Ahujg Year of Manufacture: 2010 Condition: Good, Used Control: Heidenhain TNC 620 Travel Range: 1,035 x 560 x 510 mm Speeds: 20 - 9,000 rpm Ideal for: General Machining Tool and Mold Making Single-Part and Small-Batch Production Mechanical Engineering Why this DMC 1035 V eco? This machine has been regularly serviced and is in good used condition. It offers a cost-effective way to expand your manufacturing capacity and increase your productivity.

Condition: used, Year of construction: 2021, operating hours: 4,360 h, functionality: fully functional, machine/vehicle number: JPN120193, travel distance X-axis: 650 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 435 mm, rapid traverse X-axis: 50 m/min, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, controller manufacturer: Brother CNC C00, spindle speed (max.): 16,000 rpm, number of spindles: 1, Equipment: chip conveyor, Brother Speedio R650X2 – High-Speed CNC Drilling & Tapping Center, 40-Station ATC, Through-Spindle, RTT – 3 Machines Available Highly efficient 3-axis CNC machine in a compact design, ideal for series production in the automotive, aerospace, and medical technology industries. Outstanding balance of performance, quality, and space requirements. Technical Data: Model: Brother Speedio R650X2 Control: Brother CNC-C00 Travel: X 650 mm · Y 425 mm · Z 435 mm (typical: ~650×425×435 mm) Spindle: BT-30, up to 16,000 rpm, 17 kW Tool Magazine: 40-station, ultra-fast tool change Cooling: Through-spindle, 70 bar, including emulsion mist extractor Chip Conveyor: Twin-system with filtration Special Features: - CNC Rotary Table (EA510) - Hydraulic Clamping System (80–210 bar) - Robot Interface - Tool Breakage Monitoring & Workpiece Presence Detection Hnjdpjx S Nlaofx Ahuog - Tool Presetter, Spindle Probe - Manual Pulse Generator, Lighting Package, etc. Condition & Functionality: Fully operational and thoroughly refurbished. Test protocol and control data backup available. The machine is set up and ready for demonstration at our facility. Location: 92353 Postbauer-Heng, Bavaria Scope of Delivery: All technical documentation, maintenance records, and spindle probe. All machines are in excellent condition, regularly maintained, and available immediately. Machine 1 Model: Brother Speedio R650X2 Year of manufacture: 2020 Serial number: JPN116055 Machine hours: approx. 9,600 Power-on hours: approx. 20,708 Machine 2 Model: Brother Speedio R650X2 Year of manufacture: 2021 Serial number: JPN119597 Machine hours: approx. 7,800 Power-on hours: approx. 20,000 Machine 3 Model: Brother Speedio R650X2 Year of manufacture: 2021 Serial number: JPN120193 Machine hours: approx. 4,500 Power-on hours: approx. 16,500

Condition: excellent (used), Year of construction: 2012, operating hours: 59,234 h, functionality: fully functional, This machine is being offered for sale by a European toolmaker and has been particularly well maintained. Additional photographs must be taken by the buyer on site under supervision. Due to compliance requirements of the seller, sales to Asian customers or visits by Asian companies are not possible. If you have a clear intention to purchase, we can provide you with some additional photos via WhatsApp in advance. The machine is being sold exclusively through Montrasio GmbH. Technical Data – DMC 210 FD Machine type: 5-axis machining center Model series: DMC 210 FD Machine category: Metal cutting production equipment, 3-axis milling machine, NC-program controlled Year of construction: 2012 Condition: Very good Operating hours: approx. 59,000 h Weight: 50,000 kg Control / CNC: CNC control, Siemens 840D Solutionline Software: Siemens Sinumerik Number of axes: 5-axis machining center Hodpfx Ahjx Sylkoujng Control type: Fully automatic (Code 017) Spindle / Tooling: Tool holder: HSK 100, DIN 69871 HSK100 Spindle type: HSK100 Maximum speed: 6,300 rpm Maximum feed speed: 60 m/min Maximum tool weight: 35 kg Maximum tool length: 450 mm Maximum tool diameter: 250 mm Tool magazine / Measuring technology: Tool magazine: 280 stations Measuring probe: Renishaw MP10 Traversing paths: X-axis: 1,800 mm Y-axis: 2,100 mm Z-axis: 1,250 mm Table / Workpiece: Table length: 1,850 mm Table width: 1,850 mm Maximum workpiece length: 1,500 mm Maximum workpiece weight: 5,000 kg Power supply / Connection values: Main connection: 400 V, 3/N, PE, 50 Hz Power consumption: 167 kVA Maximum current: 241 A Maximum main circuit breaker: 250 A DC control voltage: 24 V DC AC supply voltage: 230 V AC Total installed power: 163 kW Equipment: Platform: available Coolant system: available Chip extractor: available Operating manual / documentation: available

Condition: ready for operation (used), Year of construction: 2005, operating hours: 42,900 h, General Data Machine weight 6800 Main Drive Hnsdpfxsx Stl Do Ahuog Spindle speed range 12000 Movement X-Axis Movement 640 mm Y-Axis Movement 600 mm Z-Axis Movement 500 mm Table Outer length 850 mm Outer width 600 mm This 3-axis DMG DECKEL MAHO DMC 64V linear was manufactured in 2005. Ideal for precision machining, this vertical machining center offers robust performance and reliability. Consider the opportunity to buy this DMG DECKEL MAHO DMC 64V linear vertical machining center. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2016, Main Drive Number of axis 5 Spindle Speed 12000 RPM Tool taper BT 40 Movement X-Axis Movement 620 mm Z-Axis Movement 460 mm Y-Axis Movement 520 mm Hnsdpfox Stlkjx Ahusg Control Unit Brand SIEMENS Model 840D ShopMill This 5-axis Romi DMC 620-5 was manufactured in 2016, featuring a Siemens 840D ShopMill control, 620/520/460 mm travels, and a spindle speed of 12,000 rpm. It includes a 30-position tool changer and a belt-type chip conveyor. With less than 10,000 operational hours in a single-shift, consider the opportunity to buy this Romi DMC 620-5 vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: excellent (used), Year of construction: 2012, Control Heidnehain 620. Cooling threw spindle. New spindle in 2021. New srews on Z + Y in 2025. Probes, chip conveyor. Table 790 x 560 mm X axe 635 mm Y axe 510 mm Hnsdpfx Ahex Sqrnjujg Z axe 460 mm Number of tools 24 ISO 40 spindle revolutions ... 20 - 12.000 rpm machine dimensions 2500 x 2000 x 2500 mm machine weight 3 900 kg

Condition: used, Year of construction: 1988, operating hours: 23,103 h, functionality: fully functional, travel distance X-axis: 652 mm, travel distance Y-axis: 412 mm, travel distance Z-axis: 452 mm, feed length X-axis: 652 mm, feed length Y-axis: 412 mm, feed length Z-axis: 452 mm, controller manufacturer: Okuma, controller model: OSP 5000, table width: 500 mm, table length: 1,000 mm, rotational speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, spindle speed (max.): 6,000 rpm, spindle nose: BT40, number of slots in tool magazine: 20, We are offering this used Okuma MC-4VA machining centre, year of manufacture 1988. Manufacturer: Okuma Model: MC-4VA Machine type: Vertical machining centre 3-axis CNC milling machine Travels: X-axis: 652mm Hnedpfx Aex Saybohusg Y-axis: 412mm Z-axis: 452mm Spindle speed: 6000 rpm / 2 gear stages Tool changer: 20 tools Tool holder: BT40 Operating hours: 23,103 Control: OSP 5000 Programming: ISO code or IGF Data transfer: RS 232 The machine can be inspected under power. If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: used, Year of construction: 2013, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DMG MORI Machining Center Type 635 V ECOMILL Year 2013 CNC DMG Siemens With through-spindle coolant Hsdpfx Ahex R Tqwoujng With chip conveyor Equipped with linear scales on every axis Comes with workpiece probe and tool probe The screen operates with a computer mouse

Condition: ready for operation (used), Year of construction: 2007, General Data Machine weight 7500 kg Control Unit Brand SIEMENS Model SINUMERIK 810D powerline and ShopMill Main Drive Spindle speed range 50–12000 Tool taper SK40 Number of axis 3 Movement X-Axis Movement 640 mm X-Axis Rapid Traverse 70 m/min Y-Axis Movement 600 mm Hodpox R E Izsfx Ahusng Y-Axis Rapid Traverse 40 m/min Z-Axis Movement 500 mm Z-Axis Rapid Traverse 40 m/min Table Table load 600 kg This 3-axis DMG DECKEL MAHO DMC 64V linear was manufactured in 2007. It features a Siemens 810D ShopMill control, SK40 spindle with speeds up to 12,000 rpm, and a tool magazine with 30 positions. The machine includes a chip conveyor, coolant gun, and a high-pressure coolant system. Ideal for precise and efficient machining. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 2002, operating hours: 15,073 h, Manufacturer: DECKEL MAHO Model: DMF 220 linear Control: SINUMERIK 840D Interface: ShopMill Year of production: 2002 Tool magazine: 30 tools Country of manufacture: Germany Machine parameters: – Axis travel X: 2200 mm, Y: 560 mm, Z: 720 mm – Max spindle motor power: 35 kW – Tool holder: SK 40 Hnodpfx Aex Rqvdohujg – Work table dimensions: 600 x 2600 mm – Table load capacity: 2200 kg – Chip conveyor – Weight: 12,500 kg – Machine dimensions: 5600 x 3700 x 2750 mm (length – width – height) The machine is equipped with: – Coolant filter station (2050 x 1250 x 2000 mm – length – width – height)

Condition: used, Year of construction: 2005, Description Longitudinal travel X 1060 mm Cross travel Y 610 mm Vertical travel Z 610 mm CNC HURCO ULTIMAX 4 Table length 1270 mm Table width 610 mm Maximum table load 500 kg Tool magazine 24 positions Hjdpjx Rc Ulefx Ahusng Spindle taper SK 40 Maximum spindle speed 15000 rpm Chip conveyor READY FOR DELIVERY!!

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 655 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Fanuc, controller model: Fanuc 0i-MD, workpiece length (max.): 400 mm, workpiece width (max.): 355 mm, workpiece weight (max.): 250 kg, total height: 3,120 mm, total length: 2,995 mm, total width: 2,975 mm, rotary table diameter: 350 mm, spindle speed (min.): 80 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 15 bar, spindle motor power: 15 W, spindle nose: ISO 40, number of slots in tool magazine: 40, tool length: 270 mm, tool diameter: 80 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, USED ​​5-axis vertical machining center with FANUC 0i-MD CNC Hnodpfox N Tm Nex Ahujg

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, Vertical Machining Center DECKEL MAHO DMC 635V CNC Control: Siemens 840D Axes Travel X-axis mm: 635 Travel Y-axis mm: 510 Travel Z-axis mm: 460 Distance spindle nose to table surface mm: 720 Feed rates m/min: 20 Rapid traverse m/min: 30 Axis acceleration m/s2: 5 Working Table Number of pallets: 1 Pallet dimensions mm: 560×790 Max. workpiece weight kg: 600 Spindle Max. spindle speed rpm: 14,000 Spindle drive power kW: 18.5/15 (40%ED/cont) Spindle torque Nm: 100/74 Tool System Tool holder: SK40 Number of tools in magazine: 20 Electronic handwheel Chip conveyor Air blast through spindle center selectable via M-function Direct measuring system XYZ Machine running hours: Power-on hours: 14,500 Spindle operating hours: 3,600 Total power requirement kVA: 35 Base machine: Dimensions/ Weight Length mm: 2,275 Width mm: 3,288 Height mm: 2,670 Hnodpjx N H H Asfx Ahueg Weight: 4.5 t

Condition: ready for operation (used), Year of construction: 2017, operating hours: 17,550 h, General Data Machine weight 6800 kg Control Unit Brand HEIDENHAIN Model iTNC 530 HSCI Main Drive Number of axis 3 Spindle Speed 42000 RPM Hodpfxox Nr Rgo Ahusng Movement X-Axis Movement 600 mm Z-Axis Movement 360 mm Y-Axis Movement 450 mm This 3-axis +GF+ MIKRON MILL S 500 was manufactured in 2017. It features a stroke of 600mm x 450mm x 360mm, spindle speed up to 42,000 rpm, and a worktable size of 590x450mm. It supports a maximum workpiece weight of 200kg. Ideal for detailed and precise machining tasks. Contact us for more information. Application Types Milling