Aggregate Industries UK Limited

Condition: used, with 6 heads; Lsdpfxexyttzj Afloai the monoblock consists of: - capsule dispenser: - capsule pre-and cripmer Capsule type: champagne cap folding, champagne cap applicator capacity / hour ca.: 5000 working direction: rotating turret, right-left (CCW) Working type: fullautomatic

Condition: used, with manual cork magazin capacity / hour ca.: 1800 Lsdpoxyttujfx Afljai amount of capping heads: 1 Cork: sparkling wine cork Drive: motor drive electrical control: simple elctric, no PLC

Condition: used, - with optical orientation for champagne caps - 12 heads for capsule dispensing - 12 heads for capsule crimping Capsule type: optical orientation, champagne cap applicator, champagne cap folding Laedpfx Afsxyttnjlsi capacity / hour ca.: 8000 working direction: rotating turret Working type: fullautomatic  

Condition: used, - Carton erector Pextor Booster - Carton sealer Glupex - Handle applicator Flexrain Mapp VO3 - Transport Fa. Federspiel - Filling machine Rapak 1230 E antiseptic 3 and 5 litres 10 litres should be filled hot Aseptic filling machine for wine Capacity: 3 litres 16 bags/min 5 litres 15 bags/min 10 litres 12 bags/min Running time 5.800.000 cycles Year of construction of the complete line is 2005, currently the line is dismantled but can be inspected. Operation was done with 1 man.   Lajdpfsxytthox Aflei

Condition: used, Flow steam generator with 13,2 kW Electricity: 400 V Pressure steam max.: 2,5 bar Сapacity:  approx. 20 kg/h steam Lsdpoxyttbofx Afloai

Condition: used, Zum mixen aller Flüssigkeiten bis zu einer kinematischen Viskosität von v=11000mm²/s - z.B.von Wasser, Öl,Alkohol Wein Säfte Milch usw. Lajdpjxytr Rjfx Aflei Spannung 380 Volt / 220 Volt Amper 10-16

Condition: used, Paletrapper for industrial and Euro palett, with roller conveyour and strech foiling machine Laedpfx Aoxytr Dsfloi

Condition: used, Durchlaufdampferzeuger mit 23,1 kh/h Leistung: 35 kg/h Dampf Strom / Volt: 400 Leistung pro Stunde: 35 Zolltarif Nummer: 84022000 Ledpfxsxytrwj Aflsai

Condition: used, Flow Steam generator with electrical power: 16,5 kW Max. steam capacity: 25 kg/h steam  Max. steam pressure: 2,5 bar Laodpfxexytrqj Aflji Unlimited steaming, immediately ready for use, Electricity: 400 V customs no.: 84022000

Condition: used, Capsule type: champagne cap folding capacity / hour ca.: 3000 working direction: left-right Working type: fullautomatic Dim. L x W x H [m]: 1,40 amount of capping heads: 3 electrical power supply kW: 380  Lsdoxytrkepfx Afljai

Condition: used, Exzentnerschneckenpumpe von Mono Pumps  sehr guter Zustand Laodpfxexytrds Afloi

Condition: used, 4 chambers with dry steam, glass doors, suitable for this Number available (price per tank): 1 electrical power supply kW: 5 Sleevetunnel chambers: 4 Ljdoxytq Tepfx Afloai Strom / Volt: 400

Condition: used, capacity / hour ca.: 6000 Ledpfx Afsxytq Helsai working direction: left-right Strom / Volt: 14

Condition: used, Nordson Heißleim Gerät 3400 V 2002 capacity / hour ca.: 1500 Lajdpfjxytqysx Aflei Strom / Volt: 380

Condition: used, Leerflascheninspektor HEUFTmit Dokumentation und Backup CD-ROM Lajdpfxexytqto Aflji

Condition: used, 1,40 x 4,50 Höhe 1.10 Lsdpfxsxytqmo Afleai

Condition: excellent (used), spindle bore: 140 mm, turning diameter: 800 mm, GURUTZPE lathe, model Super AT 400/10000, with 10,000 mm distance between centres, prepared for spindle manufacturing, equipped with 2 heads featuring whirlwind system, swing over bed 820 mm, over cross slide 550 mm, spindle bore diameter 140 mm, 24 speeds from 9–500 rpm, with a reducer from 1–63 rpm, overall in good condition. Ljdexytqgjpfx Afloai

Condition: used, Year of construction: 2003, functionality: fully functional, Milling head speed 9000 rpm, milling limits 110x120x240 mm Handle drilling unit 1.1 kW 1400 rpm, three drills drill holes through PVC and metal for mounting Eurostandard handles Profile centering device Two side supports Lsdpfxexytqao Afljai

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, total width: 2,600 mm, total height: 2,050 mm, total length: 1,700 mm, working width: 1,370 mm, grinding width: 1,370 mm, overall weight: 2,800 kg, grinding height: 160 mm, power: 18 kW (24.47 HP), height adjustment type: electric, type of input current: three-phase, conveyor belt speed: 18 mm/s, grinding belt length: 2,200 mm, workpiece height (max.): 160 mm, compressed air connection: 6 bar, grinding belt width: 1,370 mm, table height adjustment: 157 mm, table length: 2,600 mm, table width: 1,370 mm, extraction nozzle diameter: 150 mm, power of feed motor: 750 W, input frequency: 50 Hz, input voltage: 400 V, operating pressure: 6 bar, pressure: 6 bar, transport length: 1,700 mm, transport height: 2,050 mm, workpiece width (max.): 1,370 mm, transport width: 2,600 mm, Steton LCS1370 Wide Belt Sander Machine Type: Wide Belt Sander for Woodworking Year: 2019 Format: 2N RKRT (Two belts) Condition: Very Good Italian Precision & Power – Dual-Belt Calibrating & Finishing Sander For sale: 2019 Steton LCS1370 2N RKRT Wide Belt Sander, in very good condition. Built in Italy by Steton S.p.A., this professional twin-belt sanding system is designed for high-accuracy calibration and fine finishing of solid wood, veneers, and composite panels. The 2N RKRT configuration combines a steel roller for calibration and a rubber roller with sectional pad for high-grade finishing — ideal for furniture, door, and interior component production. ⚙️ Technical Specifications – Steton LCS1370 2N RKRT Model: LCS 1370 2N RKRT Year: 2019 Type: Dual-head wide belt sander (calibration + finishing) Working Width: 1,370 mm Min/Max Workpiece Thickness: 3 – 160 mm Abrasive Belt Size: 1,370 × 2,200 mm Feed Speed: 4.5 – 18 m/min (variable) First Head: Steel roller for calibration Second Head: Rubber roller + sectional electronic pad Roller Diameters: 160 mm (steel) / 140 mm (rubber) Main Motor Power: 15 kW (≈ 20 HP) per head Feed Motor Power: 0.75 kW (1 HP) Table Lift Motor: 0.55 kW Suction Outlet Diameter: Ø 150 mm × 3 Working Air Pressure: 6 bar Total Installed Power: 18 kW Machine Dimensions (L×W×H): 2,600 × 1,700 × 2,050 mm Net Weight: approx. 2,800 kg Condition: Very good 🌟 Key Features and Advantages Two Independent Sanding Units: Calibrating roller and electronic-pad finishing head for high accuracy and smooth surface quality. Electronic Sectional Pad System: Provides automatic pressure control for veneered or delicate panels. Variable Feed Speed and Belt Control: Inverter-driven feed belt and abrasive speed ensure consistent results on any material. Automatic Table Positioning: Micrometric adjustment and electronic readout for quick, precise setup. Steton Mechanical Belt Oscillation System: Patented oscillation system works without compressed air, reducing energy consumption. Heavy-Duty Frame Construction: Rigid steel body ensures long-term stability and vibration-free performance. 🧰 Applications Wood and veneer calibration Fine finishing of MDF, chipboard, and composite panels Furniture and cabinet manufacturing Interior door and panel production Why Choose This Steton LCS1370 2N RKRT Made in Italy – precision design with industrial-grade reliability. Dual-head configuration handles both calibration and finishing in one pass. Very good condition. Ideal for high-volume joinery and furniture manufacturing. Available for viewing by prior appointment. Steton LCS1370 2N RKRT for sale 2019 Steton wide belt sander Steton LCS series specifications Used Steton wide belt sander Ireland 2N RKRT calibrating finishing sander Dual-head wide belt sander for wood Steton woodworking machinery Italy Used wide belt sanders Ireland UK Lajdpfexytp Nsx Aflji Steton LCS1370 in very good condition Used Machine Tools Ireland Steton

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, turning diameter over cross slide: 580 mm, spindle bore: 103 mm, turning diameter: 840 mm, turning diameter over bed slide: 1,030 mm, spindle speed (max.): 1,250 rpm, spindle speed (min.): 8 rpm, ZMM C10MSH Lathe, 840mm x 1500mm capacity, swing over bed 850mm, over cross slide 580mm, over gap 1020mm, spindle bore 103mm, 18 speeds 8-1250rpm, 15HP motor, bed width 520mm, equipped with quick-change tool post, steady rest (to mount) and 3-jaw self-centering chuck, year 2004, lathe in very good condition. Laodpfxexytp Ao Aflji

Condition: excellent (used), functionality: fully functional, turning diameter over cross slide: 440 mm, spindle bore: 105 mm, turning diameter: 660 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 25 rpm, Travis lathe model T 26120A/3000, with 3,000 mm between centers, swing over bed 660 mm, over cross slide 440 mm, swing in gap 900 mm, spindle bore diameter 105 mm, 16 speeds from 25 to 1600 rpm, equipped with fixed and traveling steady rests, fitted with a 3-jaw chuck of 250 mm diameter, motor power 12 HP, weight 3,850 kg, overall in good condition. Laedpfxsxytpvo Afloi

Condition: excellent (used), functionality: fully functional, spindle bore: 68 mm, turning diameter: 520 mm, Pinacho lathe model S90 260 with 1600 mm between centers, swing over bed 520 mm, swing over gap 770 mm, swing over cross-slide 325 mm, spindle bore 68 mm, 7.5 HP motor. Quick-change toolpost, with fixed steady rest, overall in very good condition. Laedpfx Ajxytppoflei

Condition: used, Year of construction: 2004, functionality: fully functional, Glazing bead saw manual, for 45° miter cuts, 2 pneumatic clamps with foot valve. Control "N" Laodpfx Asxytpisfloi

Condition: used, Year of construction: 2008, functionality: fully functional, 90° welding and possibility of welding angles from 40° through 180° Limitation of standard welding seal thickness (2mm.) (1 mm upon request). Reduction of welded profile length 3 mm. For each welded profile side. Automatic temperature control of the fusion plate. Automatic control of fusion times. Automatic control of welding times. Adjustment of fusion pressure. Integral protection of working area, fusion plate and locking cylinders. Working cycle and other functions controlled by an electronic card (DCS) Profile supports for quick change-over of counter forms. Device for quick change-over of profile positioning blade. Lajdpfxexytpco Afloi Time-controlled working cycle . Working cycle with possibility to repeat the profile locking, in case of wrong positioning Profile supporting arms.

Condition: used, Wörner pump unit GMA-B. Used condition. Laodsxytn Sepfx Aflsi