SYMATECH Maschinen Jens Hanl e.K.

Condition: good (used), functionality: fully functional, Year of construction: 2008, working width: 3,080 mm, sheet thickness (max.): 13 mm, Equipment: emergency stop, finger protection, foot remote control, For sale: Durma VS 3013 hydraulic guillotine shear, lightly used, single owner, manufactured/purchased in 2008 (supplied by Vendo Kft.). The machine is in very good technical condition and has been regularly maintained. Key Specifications: Cutting length: 3080 mm Maximum sheet thickness: 13 mm (steel), approx. 10 mm (stainless steel) Drive system: Hydraulic Back gauge: Motorized Hold-down system: Hydraulic clamps Frame: Heavy-duty welded steel construction Machine weight: 12,900 kg Condition: Very good Location: Tatabánya, Hungary Price: EUR 21,500 net The machine can be inspected and tested at our facility in Tatabánya, Hungary. Ijdpjx Taraofx Ahuoal

Condition: used, functionality: fully functional, Year of construction: 1985, Capacity: 4000 x 13 mm. Iaedpex Rx Stofx Ahujl Backgauge: Motorized. Adjustable blade angle: Yes. Adjustable cutting length: Yes. Adjustable blade gap: Yes. Year: 1985 Country of origin: Denmark. Size (L x W x H): 4600 x 2300 x 2400 mm. Weight: 20 ton. With 2500 mm. squaring arm and support arm. All our machines will be tested and serviced before delivery.

Condition: new, Year of construction: 2025, control type: CNC control, actuation type: hydraulic, working width: 4,000 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 3 °, stroke rate (min.): 12 1/min, sheet thickness (max.): 10 mm, sheet thickness steel (max.): 10 mm, STANDARD FEATURES CNC-controlled, angle-adjustable hydraulic guillotine shear CNC-controlled blade gap adjustment, stroke and cutting angle adjustment Touchscreen CNC control unit (ELGO P40T) Automatic cutting angle adjustment (according to material type and thickness) Automatic stroke reduction feature (increased speed for short cuts) High-precision, stress-relieved steel frame Hardened guides and roller-equipped upper table movement system 1,000 mm CNC-controlled, motorized, and programmable backgauge Backgauge features: - Programmable retraction - Raising function for long sheets - ±0.1 mm positioning accuracy Ball support front table for sheet feeding Upper blade: 2 cutting edges / Lower blade: 4 cutting edges High-alloy steel blades Iasdpfx Ajx Nqphshujl Special joint system requiring minimal maintenance Front squaring arms with scale, T-slot, and adjustable stopper (1,000 mm) Cutting line illumination and shadow wire Front finger guard plate (openable type) Front and side safety covers Foot pedal Movable control lever Emergency stop buttons Safety equipment in compliance with CE standards OPTIONAL FEATURES Rear pneumatic sheet support system – Type 1 Rear pneumatic sheet support system – Type 2 (with sheet return function) Angle-adjustable front gauge (0–180°) Front squaring arms in custom lengths Full-length openable front finger guard cover Front finger safety light curtain Rear safety light barrier (CE-compliant) Special blade options Laser cutting line Oil heater or oil cooler Automatic or manual central lubrication system Electric cabinet cooling system (air-conditioned) CNC-controlled front sheet support and feeding arms Special throat depth (500 mm) Light-duty guarding TECHNICAL SPECIFICATIONS (C 10 / 4000 MODEL) Cutting capacity (450 N/mm²): 10 mm Cutting capacity (700 N/mm²): 6 mm Cutting length: 4,000 mm Cutting angle: 0.5° – 3° (CNC-controlled) Cutting stroke: Automatically adjustable Throat depth: 250 mm Backgauge movement range (X axis): 1,000 mm Cutting speed: 6 – 12 strokes/min Motor power: 22 kW Oil tank capacity: 300 liters Machine weight: ~16 tons Machine dimensions (LxWxH): approx. 5,790 x 3,650 x 2,580 mm

Condition: new, Year of construction: 2025, control type: CNC control, actuation type: hydraulic, working width: 3,100 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 3 °, stroke rate (min.): 13 1/min, sheet thickness (max.): 10 mm, sheet thickness steel (max.): 10 mm, Standard Features • ELGO P40T Touchscreen NC Control Unit • Rexroth / Hoerbiger hydraulic system • Automatic CNC-controlled blade clearance, stroke, and blade angle adjustment • 1,000 mm NC-controlled, programmable, motorized backgauge • 250 mm throat depth • Programmable backgauge retract function • Backgauge lifting feature for parts longer than 1,000 mm • Adjustable cutting length via control panel to increase the number of cuts for short workpieces • Ball transfer sheet support table • 2 cutting edges on upper blade / 4 cutting edges on lower blade • Special joint system to reduce maintenance requirements • 1,000 mm front support arms with ruler, T-slot, and stopper • Front and side safety guards • Cutting line illumination and shadow wire • 1,000 mm front finger guard with openable cover • Foot pedal • Movable control lever and enclosure cabinets • Emergency stop buttons Optional Features • Rear pneumatic sheet support system (Type 1) • Rear pneumatic sheet support system with forward delivery (Type 2) • Miter gauge adjustable from 0–180° • Front support arms in custom lengths • Special throat depth of 500 mm • Full-length openable front finger guard cover • Front finger safety light curtain • Special blades • Laser cutting line indicator • Oil heater or oil cooler • Automatic or manual central lubrication • Electrical cabinet with air conditioning • CNC front sheet support arms • CE-compliant rear light barrier • Lightweight guard TECHNICAL SPECIFICATIONS VALUE Cutting Capacity (450 N/mm²) 10 mm Iodpfxjx Npddo Ahuoal Cutting Capacity (700 N/mm²) 6 mm Cutting Length 3100 mm Cutting Angle 0.5 – 3° Cutting Speed / Fast Mode 7 / 13 strokes per minute (spm) Throat Depth 250 mm Backgauge Travel (X) 1000 mm Table Length 3600 mm Table Width 880 mm Motor Power 22 kW Weight 10.5 tons

Condition: good (used), Year of construction: 2000, sheet width 3100 mm plate thickness 13.0 mm thickness at "Niro-steel" 8.0 mm down holder 14 Stück no. of strokes max. 11 Hub/min cutting angle 1°15 work height max. 770 mm column arm ? mm oil volume 300 ltr. control konv. total power requirement 15.0 kW weight 11800 kg range L-W-H 4255 x 2250 x 2400 mm Features: - Robust electro-hydraulic swing pruning shears - Operation, swivels to the front left - Electro-motorized backgauge * on recirculating ball screws * Movement by push-button (forwards backwards) * including ELGO digital position indicator - Manual quick cutting gap adjustment * by eccentric (right side stand) - Machine stand with overhang - 1x long side stop, with mm scale - 2x front support arms, with mm scale Ijdpfsx Ni D Rex Ahueal - Ball rollers in the front support table - Hinged front finger guard - 1x free-moving foot switch - Rear safety device (protective grille) - 2x front emergency stop button - Operating instructions (PDF)

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, control type: CNC control, degree of automation: automatic, sheet thickness (max.): 10 mm, Baykal MGH 3100x10 from 2008. Plateshear in neat condition. Available directly. Isdpox Nbcfjfx Ahusal

Condition: ready for operation (used), control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, sheet thickness (max.): 10 mm, total length: 4,600 mm, total width: 2,520 mm, total height: 1,850 mm, Equipment: angle stop, foot remote control, Sheet metal shear Amada GH1040 Z New blade set Iajdpfsx Igndox Ahujl Fully functional Hydraulic cylinders were overhauled approximately 6 months ago.

Condition: good (used), Year of construction: 2000, sheet width 3050 mm Iasdpox Emqyjfx Ahujl plate thickness 10.0 mm thickness at "Niro-steel" 6.0 - 8.0 mm down holder 13 Stück distance between columns 3070 mm cutting angle 1.0 - 4.0 ° no. of strokes ~ 22 Hub/min Control ELGO P8511 oil volume 240 l voltage 400 V total power requirement 15.0 kW weight 8000 kg range L-W-H 3550 x 2350 x 1900 mm good / well-maintained condition with special accessories (!!) Equipment: - NC electro-hydraulic guillotine shears - heavy / stable welded construction (machine body) - NC ELGO digital control unit "P8511" - NC electro-motorized backgauge on ball screws - electro-hydraulic cutting angle adjustment * Front analog cutting angle display - 1x stable side stop, with T-slot and mm scale - 3x stable support arms, with T-slot and mm scale - Ball castors in the work table incl. recessed grips - Front finger guard - can be folded up at the front - 1x freely movable foot switch - 2x front EMERGENCY OFF button - Operating instructions (PDF)

Condition: good (used), Year of construction: 2004, machine/vehicle number: 69839, Offer 25493 Technical data: Iodpfxox D Uzzo Ahujal - Cutting length: 3050 mm - Cutting thickness at 400 N/mm² tensile strength: 13 mm - Cutting thickness at 400 N/mm² tensile strength (up to 1000 mm length): 15 mm - Cutting angle: 0.5 – 3° - Number of sheet hold-downs: 18 pcs - Strokes per minute: 10 – 23 min⁻¹ - Powered backgauge up to: 1000 mm - Rear area secured with light barrier - Front squaring arm: 1000 mm - HSLX version features: - CNC control HACO SC 5 controller (sheet thickness input in mm) - Automatic cutting angle adjustment by sheet thickness - Cutting length limitation - Automatic positioning of the backgauge (8 programs – 80 sets) with digital display and automatic backgauge retraction - Option for powered backgauge adjustment via 2 push buttons - Drive: 400 V / 22 kW - Electric foot pedal - Space requirement without support arms: approx. W 4200 x H 2250 x D 2200 mm - Weight: approx. 9000 kg - The machine has been welded in various places by the previous owner and has only been repainted on the front side.

Condition: good (used), functionality: fully functional, Year of construction: 2005, Used 4-meter guillotine shears from Haco Ijdpfox D Uvrex Ahusal Model: HSL 4010 Capacity: 4100 x 10 mm Electric back gauge Year of manufacture: 2005

Condition: good (used), Year of construction: 1997, machine/vehicle number: 68868, Offer 25500 Technical Data: - Cutting length: 3050 mm - Cutting thickness at 400 N/mm² tensile strength: 13 mm - Cutting thickness at 400 N/mm² tensile strength (up to 1000 mm length): 15 mm Iaedpfex A Tpnjx Ahusl - Cutting angle: 0.5 – 3° - Number of sheet hold-downs: 18 pcs - Strokes per minute: 10 – 23 min⁻¹ - Motorized backgauge up to: 1000 mm - Rear guard with light barrier - Front angular stop: 1000 mm - HSLX version: – CNC control HACO SC 5 Controller with input of sheet thickness in mm – Automatic cutting angle adjustment according to sheet thickness – Limit for cutting length – Automatic positioning of backgauge (8 programs – 80 sets) with digital display and automatic backgauge retraction – Motorized backgauge adjustment possible via 2 push buttons - Drive: 400 V / 22 kW - Electric foot switch - Space requirement without support arms: approx. W 4200 x H 2250 x D 2200 mm - Weight: approx. 8500 kg

Condition: ready for operation (used), Year of construction: 2005, sheet width 3050 mm plate thickness 13.0 mm thickness at "Niro-steel" 8.0 mm work height max. 930 mm no. of strokes 9 - 17 Hub/min cutting angle 0.5 - 3.0 ° down holder 18 Stück Control SC 100 T engine output 22.0 kW weight of the machine ca. 9500 kg range L-W-H 4270 x 2200 x 2250 mm Good/well-maintained condition (!!) Isdjx Avq Iepfx Ahusal Current new price approx. 80.000 euros Features: - Electro-hydraulic/sliding table shear - HACO CNC control model “SC 100 T” * Preset positioning of the backgauge * Digital display of actual position * Electro-hydraulic cutting angle adjustment * Electro-hydraulic cutting gap adjustment * LCD display * Emergency stop switch - NC electro-motorized backgauge, on ball screws - Hydraulically operated hold-down device - Front finger guard - Ball rollers in the support table * Support table with recessed handles - 1x side stop, with mm scale - 1x front support arms - 1x freely movable foot switch - Rear safety device - Operating instructions in German (PDF)

Condition: new, functionality: fully functional, control type: CNC control, actuation type: hydraulic, controller manufacturer: Cybelec, controller model: Cybtouch 8, working width: 4,160 mm, sheet thickness (max.): 13 mm, back gauge adjustment: CNC-controlled, back gauge: 1,000 mm, power: 30 kW (40.79 HP), control voltage: 480 V, overall weight: 16,850 kg, total length: 4,930 mm, total width: 3,160 mm, total height: 2,100 mm, warranty duration: 12 months, Equipment: CE marking, angle stop, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, Comparable to Durma, Baykal, Ermaksan, etc. Swing beam guillotine shearing machine with fixed cutting angle Maximum cutting length: 4160 mm Maximum sheet thickness: 13 mm (at 450 N/mm²) Cutting angle: 2 degrees Number of hold-downs: 19 Motor power: 30 kW Cutting speed: 8 strokes/min Oil tank: 400 l Machine length: 4930 mm Machine width (without support arms): 2345 mm Total width: 3160 mm Machine height: 2100 mm Machine weight: 16,850 kg Gap depth: 150 mm Standard equipment: CE safety equipment / conformity Manual central blade gap adjustment / handwheel Cutting length adjustment via control panel Support balls in the table Iajdpfx Asxyxxcohuel Motorized, programmable backgauge 1000 mm via ball screw drive Folding finger guard over 1000 mm 1 piece 1000 mm stop arm with scale, T-slot, flip stop, support balls 2 pieces 1000 mm support arms with integrated balls Cutting line illumination via shadow projection, LED lighting Adjustable shadow line High-quality top blade with 2 cutting edges High-quality bottom blade with 4 cutting edges Features: CNC control Cybelec Cybtouch 8 Pneumatic sheet support device Front finger guard with light barrier CNC-controlled blade gap adjustment Service and spare parts supply provided by Viering Werkzeuge Maschinen GmbH. Other Dener sheet metal working machines available upon request.

Condition: new, functionality: fully functional, control type: CNC control, actuation type: hydraulic, controller manufacturer: Cybelec, controller model: Cybtouch 8, working width: 3,120 mm, cutting angle (max.): 2 °, sheet thickness (max.): 10 mm, back gauge adjustment: CNC-controlled, back gauge: 1,000 mm, power: 22 kW (29.91 HP), control voltage: 480 V, total length: 3,850 mm, total width: 2,745 mm, total height: 2,000 mm, warranty duration: 12 months, Equipment: CE marking, angle stop, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, Comparable to Durma, Baykal, Ermaksan, etc. Swing Beam Shear with Fixed Cutting Angle / Swing Beam Type Maximum cutting length: 3120 mm Maximum sheet thickness (at 450 N/mm²): 10 mm Cutting angle: 2 degrees Number of hold-downs: 15 pcs Motor power: 22 kW Cutting speed: 12 strokes/min Oil tank capacity: 200 l Machine length: 3850 mm Machine width: 2175 / 3060 mm with supports Overall width: 2745 mm Machine height: 2000 mm Machine weight: 13,500 kg Throat depth: 150 mm Iedpfx Ahsxyw Icoueal Standard equipment: CE safety equipment / compliance Maper control with memory function Manual central blade gap adjustment / handwheel Adjustment of cutting length via control panel Support balls integrated in the table Motorised, programmable backgauge 1000 mm via ball screw Folding finger guard up to 1000 mm 1 x 1000 mm support arm with scale, T-slot, tilting stop, support balls 2 x 1000 mm support arms with integrated balls Cutting line illumination via shadow line and LED lighting High-quality upper blades with 2 cutting edges High-quality lower blades with 4 cutting edges Option: CNC control Cybelec CybTouch 8 G The powerful upgrade for all types of high-quality guillotine shears. High-contrast touchscreen with vibrant colors Clear display with all necessary information for the operator Intuitive and user-friendly Complete part programming in seconds CNC blade gap adjustment Automatic blade gap setting after entering material data on the control panel

Condition: excellent (used), Hello, Ijdpfx Ahjxyi T Roueal For sale: Guillotine Shears Type NTA-3150 Cuts sheet metal up to 12mm thick. The machine is operational and in continuous use; inspection and testing are possible. The price listed in the advertisement is net and VAT must be added. The machine can be inspected in Starachowice at ul. Kwiatkowskiego 13. Telephone contact from 7:00 to 16:00.

Condition: ready for operation (used), Year of construction: 2000, sheet width 1030 mm plate thickness 12.0 mm thickness at "Niro-steel" 8.0 mm blade length 1050 mm cutting angle 3.0 Grad no. of strokes ca. 10 Hub/min back stop - adjustable 500 mm Control konv. table height 900 mm operating pressure max. 280 bar oil volume 150 l engine output 11.0 kW weight 1900 kg range L-W-H 1550 x 1150 x 1600 mm Machine from a maintenance workshop (!) Isdpexyafdofx Ahueal Furnishing: - heavy / robust electro-hydraulic sheet metal plate shears - Machine body in a closed design as an all-steel welded construction - Knife upper cheek slides in a long downward direction over the knife edge . protruding plastic guides - Cutting is done hydraulically via two hydraulic cylinders - The upper beam returns to its starting position in two ways . Spring batteries on the side stands - manual back gauge, adjustable from the rear * Adjustment by handwheel, with mm scale - manual cutting gap adjustment - 1x side stop, with mm scale and T-slot - Foot switch for lifting version - rear sheet metal slide - instruction manual * Machine link: ?machineno=1008-9325319

Condition: ready for operation (used), Year of construction: 2004, control type: manual, actuation type: hydraulic, working width: 2,050 mm, stroke rate (min.): 18 1/min, stroke rate (max.): 18 1/min, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 6 mm, back gauge: 1,000 mm, power: 15 kW (20.39 HP), overall weight: 7,600 kg, total length: 2,400 mm, total width: 1,900 mm, total height: 2,000 mm, number of support arms: 2, Cutting length 2050 mm, cutting capacity 10 mm, motor 14,5 KW, working high 800 mm, back gauge 5-1000 mm motorised, 2 frontsupports, dimension 2700x1900x2000 mm, weight ca. 7600 kgs Ijdpfx Asxx Sm Djhujal

Condition: good (used), functionality: fully functional, Year of construction: 1997, machine/vehicle number: C971109, controller manufacturer: AMADA, controller model: PROMECAM, input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, overall weight: 10,000 kg, total length: 4,500 mm, total width: 3,500 mm, total height: 2,800 mm, AMADA GPX 630 Guillotine Shear - Power supply: 5.5 kW - Max. backgauge travel: 160 mm - Including left stop Isdpjxw T Iasfx Ahuoal - Backgauge length: 3200 mm - Cutting length: approx. 3050 mm Note: The item must be definitively collected between 19 and 23 January 2026 on a date to be mutually agreed. FCA D-76571 Gaggenau – loaded onto truck

Condition: used, Year of construction: 1998, sheet width 3050 mm plate thickness 12 mm distance between columns 3120 mm back stop - adjustable 20 - 750 mm true cutting angle adjustable 0,5 - 3,0 Grad cutting length 300 - 3000 mm connected load 22 kW weight of the machine ca. 10,5 t dimensions 4,1 x 2,3 x 2,1 m Hydraulic guillotine shears with: - Digital display for back gauge - Cutting gap adjustment - Cutting length adjustment - Emergency stop device Iaodjxwzc Eopfx Ahuel - Angle stop and front sheet metal supports - 3 sets of spare blades - foot switch - documentation

Condition: used, functionality: fully functional, Year of construction: 1985, Capacity: 3100 x 12,7 mm. Backgauge: Motorized. Adjustable blade angle: Yes. Adjustable cutting length: Yes. Adjustable blade gap: Yes. Year: 1985 Isdexwmu Hopfx Ahusal Country of origin: Belgium. Size (L x W x H): 4100 x 2900 x 2170 mm. Weight: 8800 kg. With ligth guard for back gauge, angle and support arms. All our machines will be tested and serviced before delivery.

Condition: excellent (used), Year of construction: 2014, actuation type: hydraulic, working width: 3,100 mm, stroke rate (min.): 13 1/min, sheet thickness (max.): 10 mm, table height: 800 mm, back gauge: 1,000 mm, power: 22 kW (29.91 HP), Equipment: CE marking, emergency stop, finger protection, foot remote control, safety light barrier, We hereby offer you a hydraulic swing beam shear of the brand "ERMAKSON", used, in very good condition. Iaedpfx Aexvinmjhuol Please feel free to contact us for a quote.

Condition: used, Cutting length: 3100 mm Iaodpfoxuh Ipjx Ahuel Steel cutting capacity: 12 mm Backgauge: 1000 mm

Condition: good (used), Year of construction: 2006, machine/vehicle number: B0617A0014, Offer 25376 Technical Data: Ijdpfxoxp Hp Us Ahueal - Max. cutting width: 3050 mm - Max. cutting capacity at 45 Kp/mm²: 13 mm - Hydraulic cutting angle adjustment - Number of hold-downs: 13 pcs - Front angle gauge - 4 front support arms - Motor-driven, position-controlled backgauge: 10 - 1000 mm - Cutting line illumination - Rear area safety with side grids and light barrier - Electric foot switch - Drive: 400 V / 20 kW - Required floor space approx.: W 4350 x H 2100 x D 2200 mm - Weight approx.: 8.5 t

Condition: new, Year of construction: 2026, 3050 mm 12,0 mm 0,5-3,0 ° 1000 mm Ijdpoxpi Dhofx Ahujal table height 930 mm work height max. 930 mm

Condition: used, functionality: fully functional, controller manufacturer: Elgo, controller model: Z16, working width: 3,100 mm, sheet thickness steel (max.): 10 mm, back gauge adjustment: motor-driven, overall weight: 8,250 kg, Capacity: 3100 x 10 mm. Backgauge: Motorized. With Elgo Z16 digital readout. Adjustable cutting length: Yes. Adjustable blade gap: Yes. Country of origin: France. Size (L x W x H): 3800 x 2900 x 1600 mm. Weight: 8250 kg. Iajdpfx Aexphaujhujl Swing beam shear. With squaring arm and 3 support arms. All our machines will be tested and serviced before delivery.