Przedsiębiorstwo Wielobranżowe GALMET s.c. Kuś Teresa Kuś Jarosław

Year of construction: 2011, condition: ready for operation (used), travel distance X-axis: 8,000 mm, travel distance Y-axis: 1,350 mm, travel distance Z-axis: 2,000 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530 BF 150 LCD with smartTNC, Mousepad, and DXF-Converter, overall weight: 45,000 kg, spindle motor power: 28,000 W, spindle speed (max.): 4,000 rpm, table length: 9,950 mm, table width: 1,150 mm, number of axes: 5, This 5-axis KIHEUNG RIGITRAX X 8000 was manufactured in 2011. It features an impressive X-axis travel of 8000 mm, Y-axis travel of 1350 mm, and Z-axis travel of 2000 mm. The machine is equipped with a powerful 28 kW spindle motor and a 40-fold tool changer for efficient operations. If you are looking to get high-quality milling capabilities, consider the KIHEUNG RIGITRAX X 8000 bed type milling machine we have for sale. Contact us for further details. Pjdpfszhmn Uox Anpepu - Main Computer: MC 422 C with Software option 1 & 2- Table Length: 9950 mm- Table Width: 1150 mm- T-Slots Surface: 9 x 22 / 10 x 22 nr. x mm- T-Slots Distance: 125 mm- T-Slots Front Surface: 2 x 22 mm- Max. Table Load: 3500 kg/qm- Feed Rate (all 3 axes): 10000 mm/min- Rapid Traverse (X, Y, Z axes): 16000 mm/min- Feed Power X-Axis: 70 Nm- Feed Power Y-Axis: 27 Nm- Feed Power Z-Axis: 50 Nm- Spindle Taper: ISO 50, DIN 69871- Spindle Speed Range (2 Steps):- 1st Step: 0 - 1000 U/min- 2nd Step: 1001 - 4000 U/min- Main Spindle Motor Power (100% / 60%): 28 / 38 kW (SIEMENS Main Spindle Motor)- Axis Drives: AC-Drives SIEMENS- Coolant Tank Volume: 500 l (without through-spindle cooling) / 1500 l (with through-spindle cooling - 2 pumps)- Linear Measuring System: HEIDENHAIN scales with DA 300 compressed air system- Spindle Gearbox: ZF reduction gear, 2-speed (1-1000 / 1001-4000 rpm), cooled- Milling Head: Universal Automatic Milling Head A 4 Plus, "HURON" system, cooled, bi-rotational 2.5° x 2.5°, programmable and automatic positioning in 2.5° of the 45° and 90° planes (5-axis simultaneous / indexing preparation)- Tool Changer: 40-fold vertical/horizontal chain-type system, driven via servomotor, HEIDENHAIN encoder monitoring- Through-Spindle Coolant (CTS / IKZ): 16 bar high-performance cooling system with paper filter (DEUBLIN rotary union, 16 bar for spindle, 8 bar for 6 coolant nozzles at spindle nose)- Coolant Tanks: 2 tanks (1200 l clean tank and 500 l pre-tank) with paper band filter system (500 mm paper width, 10 micron filtration fineness)- Chip Conveyor: Wide hinged belt conveyor X 8000 rear-side, elevated discharge- Measuring Preparations: Prepared for TS 220 workpiece touch probe and TT 140 tool touch probe- Additional Features: Hydraulic counter-weight balance in Z-axis, spindle orientation for rigid tapping, PLC prepared for 4th axis, automatic taper blow-out unit (A2 + A4 head), automatic central lubrication, electronic portable handwheel HEIDENHAIN HR-410, Ethernet interface, automatic Power-Off- Machine Enclosure: Partial machine enclosure with 2 front doors for X 4000 or 4 front doors for X 6000 - X 8000- Paint Finish: Light grey RAL 7035, Carmine red RAL 3002

Condition: ready for operation (used), Year of construction: 1990, Available immediately from university surplus: Vertical milling machine LAGUN Type FVA 3 LA Year of manufacture 1990 Podpszg Th Eofx Anpjpu Table 1600 x 400 mm Travel X/Y/Z 1600/360/420 mm Spindle taper SK 50 Automatic quill feed 127 mm Spindle speeds 28 – 1400 rpm Drive power 12.5 hp Weight 4.5 tons Numerous accessories included: collets, milling cutters, hydraulic vise Price: Euro 1,500.00 plus VAT, ex works

Condition: ready for operation (used), Year of construction: 1986, Immediately available ex location: Fully automatic milling machine Busch Type NF 8/32 Year of manufacture: 1986 Groove width up to 32 mm Pjdpfx Ajzg Thxjnpopu Machining length up to 6100 mm Automatic material feed Automatic infeed Drive: 5.5 kW Accessories: support tables Tool holders, cutters Coolant system Digital display Weight: 4 t Price: EUR 3,000 – plus VAT ex location

Condition: good (used), Jig boring/Milling machine HAUSER 3DR Travel X: 400 mm Travel Y: 200 mm Travel Z: 400 mm Spindle: 2 speeds Cone:CM2 Spindle exit: 120 mm 2 speed ranges 60-1500 RPM / 1500-3000 RPM Table size: L 590 mm x W 320 mm Speed variator at the spindle 2 advances Auto descent: 0,03 mm/min - 0,06 mm/min X-axis functional with Mitutoyo devise Psdpfx Aozg H I Esnpopu Y and Z axis: defective scale Voltage: 380 V Width: 1500 mm Depth: 1700 mm Height in low position: 1800 mm Weight: approx 1,5 T

Condition: used, Year of construction: 1959, This Hess surface milling machine, type KOF/K, will be auctioned off in our industrial auction / machine auction hosted by Kusch+Co GmbH – including spray booths, milling and drilling machines, industrial sewing machines, grinding machines, and workshop and office equipment – online. Ppsdozfiicspfx Anpeu You can find this and many other items on our platform.

Condition: used, This Reinhard milling machine, type: HKB, will be auctioned off online in our industrial auction / machinery auction by Kusch+Co GmbH – including painting booths, milling and drilling machines, industrial sewing machines, grinding machines, and workshop and office equipment. Psdezfihrspfx Anpopu You can find this and many other items on our platform.

Condition: used, overall weight: 1,500 kg, This deck-type Maho milling machine, model: type: MH 700 C, will be auctioned off online in our industrial auction / machine auction by Kusch+Co GmbH – including painting booths – milling and drilling machines – industrial sewing machines – grinding machines – workshop and office equipment. Pjdpfx Anozfig Ispjpu You can find this and many other items on our platform.

Year of construction: 1970, condition: ready for operation (used), A conventional universal milling machine Malick & Walkows is available. Table dimensions X/Y: 1000mm/300mm, speed: 1120rpm, travel X/Y/Z: 900mm/300mm/500mm, quill stroke: 80mm, feed rate: 250mm/min, machine dimensions X/Y/Z: approx. 1700mm/1900mm/1700mm, weight: approx. 1750kg. Including machine vise and accessories. An on-site inspection is possible. Podpfx Anozdumwjpspu

Year of construction: 2016, condition: used, overall weight: 300,000 kg, total length: 16,000 mm, total width: 9,000 mm, total height: 8,000 mm, Waldrich Coburg 17 S-10 FP 300 NC / 5 m – CNC Gantry Milling MachineMachine: 17-10 FP 300 NC / 5 mSerial Number: 2.8304.06Original Year of Manufacture: 1983In 2016, it was comprehensively overhauled and modernized by the manufacturer Waldrich Coburg. The machine is equipped with a modern Siemens SINUMERIK 840D sl control system and is ideally suited for heavy-duty machining of large and complex workpieces in machine, tool, mold, and power plant construction.The delivery includes a Universal Fork Milling Head USP 300 C 350 with B-axis as well as an additional Angle Milling Head WFU 500 SZ 400 F17, ensuring versatile machining capabilities for demanding milling tasks.The machine features a modern full protective enclosure, coolant system, chip conveyor technology, and extensive technical documentation including circuit diagrams and overhaul documentation.The system has been professionally dismantled and packed in containers.It is located at the Port of Hamburg and is immediately available and ready for worldwide shipment.Manufacturer: Waldrich CoburgOverhauled by Waldrich Coburg (2016)Siemens SINUMERIK 840D slUniversal Fork Milling Head USP 300 C 350Additional Angle Milling Head WFU 500 SZ 400 F17Workpiece weight up to 100 tFull protective enclosureExtensive technical documentation availableDismantled and ready for loadingLocation: Port of Hamburg, GermanyImmediately available Passage between the uprights: 3,500 mm 5-axis machining: Yes Travel Y-axis: 3500 - mm Weight approx.: 300,000 kg Travel W-axis: 800 - mm Travel Z-axis: 2050 - mm Tool holder type: ISO 50 Travel X-axis: 5700 - mm Movement B-axis: 0 - 180 ° Pedpfozc Sagjx Anpjpu Dimensions (LxWxH) approx.: 16000 x 9000 x 8000 mm Year of construction: 2,016 Condition: unchecked Terms of payment: 100% prepayment before pick-up Terms of delivery: FOB Free On Board under power: No

Year of construction: 1991, condition: ready for operation (used), Travel X/Y/Z: 500mm/380mm/350mm, tool holder: SK40, quill stroke: 50mm, speed: 4000rpm, feed: 2m/min, rapid traverse: 4m/min, table dimensions X/Y: 800mm/360mm, max. table load: 250kg. Machine dimensions X/Y/Z: approx. 1650mm/2250mm/1850mm, weight: approx. 1800kg, control: Maho 232. The Y-axis shows a malfunction from a feed rate of 50%. Documentation available. An on-site inspection is possible. Ppsdpfx Anjzc Rd Repou

Condition: ready for operation (used), Year of construction: 2014, operating hours: 2,802 h, functionality: fully functional, machine/vehicle number: 12230000107, spindle speed (max.): 10,000 rpm, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller model: Siemens 840D sl, laser power: 100 W, Highly accurate 5-axis milling, laser texturing, and laser paint removal on a precision machine! TECHNICAL DETAILS Travel range X-axis: 650 mm Travel range Y-axis: 650 mm Travel range Z-axis: 560 mm Ppodpozcxwrsfx Anpou Main spindle speed range: 20 - 10,000 rpm Main spindle drive power: 13 / 9 kW Torque: max. 83 / 57 Nm Tool holder: HSK A63 according to DIN 69893 Table clamping surface: 800 x 650 mm Table load capacity: max. 600 kg Swivel range B-axis: ± 120° Rotational range C-axis: 360° T-slots: 9 x 14 x 63 mm Workpiece dimensions: max. 650 (840) x 500 mm Number of tool positions: 30 Tool weight: max. 6 kg Tool diameter: max. 80 mm Tool diameter with free neighboring pocket: max. 160 mm Tool length: max. 315 mm Tool change time (tool to tool): 1.6 s Tool change time (chip to chip): 8.0 s Rapid traverse: 40 m/min Feed force: 7 / 13 / 10 kN Feed rate: 1 - 40,000 mm/min MACHINE DETAILS Control system: Siemens 840D sl Axes: 5 Total power consumption: 24 kVA Dimensions & Weight Footprint: approx. 4.5 x 3.5 x 2.3 m Machine weight: approx. 11.5 t Operating hours milling machine Spindle hours (according to counter): 4,738 h Power-on hours (according to counter): 18,703 h Operating hours laser Spindle hours (according to counter): 2,802 h Power-on hours (according to counter): 6,177 h EQUIPMENT Swiveling rotary table Laser head 100 W Coolant system Electronic handwheel Documentation

Condition: used, Type: ADB/F 380.60M Pjdpfx Anezcgd Tspepu

Year of construction: 2017, condition: ready for operation (used), X-axis: 550mm, y-axis: 305mm, z-axis: 460mm, milling table dimensions: 800x320mm, T slots: 14mm/3 pieces/distance 100mm, max. table load: 300kg, spindle to table distance: 100-600mm, number of tool positions: 12, max. tool diameter: 70mm, max. tool length: 300mm, max. tool weight: 6kg, tool change time (T to T): 7s, milling spindle power S1 operation: 5.5kW, power S6 30% operation: 7.8kW, torque S1 operation: 35Nm, torque S6 30% operation: 50Nm, spindle holder: ISO 40/BT40x45°, coolant system pump output: 650W, tank capacity: 120l, compressed air minimum connection pressure: 0.6MPa (6bar), air consumption: 0.1-0.15m³/h at 0.6MPa, compressed air quality: ISO 8573.1 class 2, compressed air connection: 3/8 inch, connected load: 12.5kVA, control: Siemens SINUMERIK 808D MILLING, length: 2164mm, front width: 1520mm, side width: 1860mm, height: 2200mm, door opening range: 760mm, door opening width: 1055mm, foundation/installation area: 1520x2080mm, weight: 2.8t. An on site inspection is possible. Ppedpozcfk Ejfx Anpou

Year of construction: 2002, condition: ready for operation (used), travel distance X-axis: 2,800 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 800 mm, spindle speed (max.): 18,000 rpm, tool weight: 10,000 g, number of axes: 4, This 4-axis FPT DINO CNC Gantry Milling Machine was manufactured in 2002. It features an impressive X-axis travel of 2,800 mm, Y-axis travel of 1,600 mm, and Z-axis travel of 800 mm. The machine is equipped with an electrospindle capable of speeds up to 18,000 RPM and a robust gantry type cast-iron construction. If you are looking to get high-quality milling capabilities, consider the FPT DINO machine we have for sale. Contact us for further details. Pedpfx Aezbic Aonpspu • Rapid feed rate: 35,000 mm/min • Total installed power: 68.7 kW / 93.4 HP • Power supply: 400 V, 50 Hz, 116.1 A • Machine structure: Gantry type cast-iron construction • Spindle: Electrospindle, 5,000 / 10,000 / 15,000 rpm • Spindle speed: 18,000 rpm • Spindle taper: HSK63 • Tool magazine capacity: 40 positions • Max tool diameter: 70 mm • Max tool length: 300 mm

Year of construction: 1989, condition: ready for operation (used), Weight: 1.5t, operating hours unknown, with documentation, machine vices and fixtures are available as accessories, the machine ran in one shift operation and was serviced regularly. An inspection on site is possible. Pjdpfxozbb Sps Anpepu

Condition: used, Year of construction: 2003, The equipment will be available for sale starting March 2027, as it is currently still in use within the production process Please state your offer price. Price without packaging and transportation; Payment in advance. You need to make us a price offer is you are interested about the machine. The hand over will be at our location Terms of delivery: EXW Cugir, Romania The buyer can assist in disassembling the machine. The buyer is responsible for transporting the machine. We organize only the loading part of the machine on the trailer/truck with forklift/crane Pjdjza Tyvjpfx Anpspu The equipment will be available for sale starting March 2027, as it is currently still in use within the production process

Year of construction: 1999, condition: ready for operation (used), This 4-axis ANAYAK VH plus-2000 was manufactured in 1999. It features an X-axis travel of 2000 mm, Y-axis travel of 1500 mm, and Z-axis travel of 1460 mm. The machine is equipped with a powerful spindle offering a speed range of 24 - 3000 rpm and a maximum table load of 6 t. If you are looking to get high-quality milling capabilities, consider the ANAYAK VH plus-2000 bed type milling machine we have for sale. Contact us for further details. Psdpfx Aneza E Hhopjpu - Control Unit: Heidenhain TNC426CB- X-Axis Travel: 2000 mm (over rotary table)- Y-Axis Travel: 1500 mm (Milling capacity approx. 1200 mm)- Z-Axis Travel: 1460 mm (Vertical head milling capacity approx. 1295 mm / Horizontal approx. 1360 mm)- Spindle Power: 35 / 30 kW- Torque: 1337 / 1146 Nm- Spindle Speed Range: 24 - 3000 rpm- Feed Range (X-Y-Z): 10 - 3000 mm/min- Feed Range (B-Axis): 0.1 - 1.5 rpm (min⁻¹)- Rapid Traverse (X-Y-Z): 10000 mm/min- Rapid Traverse (B-Axis): 3 rpm (min⁻¹)- Tool Taper: SK50 DIN2080- Machine Weight: approx. 24 t- Rotary Table Clamping Surface: 1350 x 1550 mm- T-Slots: 9 x T28h7 / 150 mm distance- Max. Table Load: 6 t

Year of construction: 1998, condition: ready for operation (used), travel distance X-axis: 2,500 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 975 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426, overall weight: 24,000 kg, spindle speed (max.): 3,000 rpm, number of axes: 3, This 3-axis ANAYAK FBZ-HV-2500 was manufactured in 1998. It features a generous X-axis length of 2500 mm, Y-axis length of 900 mm, and Z-axis length of 975 mm. The machine is equipped with multiple heavy-duty Röhm vices and a hinged belt-type chip conveyor system for efficient chip management. If you are looking to get high-quality milling capabilities, consider the ANAYAK FBZ-HV-2500 bed type milling machine we have for sale. Contact us for further details. - Dimensions Clamping Surface: 800 x 800 mm + 1615 x 800 mm- Power Consumption: 60 A- Technical Availability: 97.1%- Planned Performance Hours/Year: 1801 Std.- Performance Index 2012: 169%- Net weight: 24t- Workholding/Clamping Equipment: Equipped with multiple heavy-duty Röhm machine vices on the T-slot table- Swivel / Indexing Mechanism: Features rotary/swivelling foundations beneath the vices- Chip Management: Hinged belt-type chip conveyor system discharging into a mobile steel skip/bin- Coolant System: External enclosure panels with viewing window and localized splash guarding Psdpfx Anjza E D Hopepu

Condition: ready for operation (used), X-axis: 600mm, y-axis: 600mm, z-axis: 450mm, infinitely variable speed range (vertical and horizontal): 10-6,300rpm, AC main spindle drive power at 44% duty cycle: 9kW, drive power at 100% duty cycle: 6kW, max. torque: 800Nm, braking: electrical, number of gearbox stages: 4, max. spindle torque at 44% duty cycle: 800Nm, tool holder: SK40/ DIN69871, retention knob: DIN69872 B, min. clamping force: 12,000N, min. unclamping force: 3,000N, clamping surface of angle table: 530x900mm, number of T-slots: 8, T-slot width: 14H7, T-slot spacing: 63mm, max. workpiece weight: 400kg, coolant tank capacity: 150l, flow rate: 20l/min, connected load: 15kW, with tool holders and documentation. An on-site inspection is possible. Pjdpjzavyrefx Anpspu

Condition: ready for operation (used), Rotational speed: 0-3150/min, power supply: 20A, connected load: 9kW, control: Heidenhain TNC 155, length: 2700mm, width: 2900mm, height: 2000mm, weight: 2.3t. An on-site inspection is possible. Pedezavyxepfx Anpspu

Condition: ready for operation (used), X-axis: 1080mm, y-axis: 710mm, z-axis: 710mm, speed range: 1-12,000/min, max. table load: 550kg, NC rotary table diameter integrated into the fixed table: 800mm, table dimensions: 1500x800mm, number of tool positions: 32, tool holder: SK 40 DIN 69872, connected load: 15kW, control system: Heidenhain TNC 430, operating hours: 63,619h, spindle hours: 22,552h, with controlled NC swivelling milling head B-axis, active cooling for the B-axis motor spindle, handwheel, operating mode 4, the hard drive drive amplifier was replaced in January 2025. An on-site inspection is possible. Pjdpfxozadkre Anpjpu

Year of construction: 2006, condition: ready for operation (used), Number of axes: 3, table dimensions: 1210x267mm, max. spindle speed: 4000rpm, weight: approx. 2t. An on-site inspection is possible. Ppjdpfsy Uyf Ajx Anpsu

Year of construction: 2013, condition: used, overall weight: 15,500 kg, total length: 4,000 mm, total width: 2,250 mm, total height: 2,810 mm, spindle motor power: 29,000 W, ALZMETALL GS 1000/5-T CNC 5-axis machining center stable gantry design equipped with NC rotary tilting table and torque motors for backlash-free and highly dynamic direct drives in A and C axis simultaneous 5-axis machining possible equipped with 3D interpolation look-ahead TCPM and free contour programming water-cooled high-frequency motor spindle with thermal compensation (Therm-Ex) and air blow through spindle high-pressure coolant system extensive coolant equipment with band filter high-pressure pump and chip conveyor oil mist extraction system (LTA) integrated measuring systems with 3D probe (M&H) and laser tool measurement (Blum) collision monitoring (DCM) pick-up tool changer system automatic central lubrication LED working area lighting full enclosure Weight approx.: 15,500 kg Travel Z-axis: 600 - mm 5-axis machining: Yes Travel X-axis: 800 - mm Dimensions (LxWxH) approx.: 4000 x 2250 x 2810 mm Spindle performance: 29 kW Movement A-axis: 0 - 140 ° Spindle speed: 12000 - rpm NC rotary table: Yes Ppjdpey Th U Njfx Anpeu Travel Y-axis: 800 - mm Number of tool locations: 33 Control: Heidenhain iTNC 530 Movement C-axis: 360 - ° Dimensions of the clamping surface: 800 x 630 mm Year of construction: 2,013 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes

Year of construction: 1992, condition: ready for operation (used), A bed milling machine is offered. Spindle drive: 25kW, table clamping surface X/Y: 1250mm/500mm, travel paths X/Y/Z: 1000mm/500mm/600mm, tool holder: ISO 40, feed rate: 0mm - 3000mm/min. Equipped with CNC control, coolant system, electronic handwheel, machine weight: approx. 4200kg, machine dimensions X/Y/Z: approx. 2800mm/2400mm/2500mm. Inspection possible by arrangement. Psdpfx Aney Taubopjpu

Year of construction: 1981, condition: used, machine/vehicle number: 1157, Very high-quality and precise polishing milling machine. Spindle speed: 750 ~ 3000 rpm Spindle length: 430 mm Spindle weight: 155 kg Voltage: 400V-3F Motor: 4 kW Compressed air: 6 bar, approx. 12 m3/h Work table: 600 x 450 mm Rapid traverse of work table: 5000 mm/min Feed of work table: 0 ~ 5000 mm/min, continuously adjustable Travel of work table: 700 mm Weight of work table: 100 kg Machine weight: 3800 kg Control cabinet weight: 800 kg Machine dimensions: L x W x H 2320 x 1200 x 1920 mm Ppedpfx Anjy Sid Aopju Control cabinet dimensions: L x W x H 2000 x 500 x 2100 mm Includes manual and parameters.